Factory resetting. - Motorola Droid X2

I'm currently running the supercharged script on my phone and I was wondering if it was safe to factory reset the phone. Also would I lose the supercharged script?
While you're here, can someone tell me how we get into stock recovery? Same as the X?
Sent from my DROID X2 using XDA Premium App

Bump? Does anyone know?
Sent from my DROID X2 using XDA Premium App

If you are doing a factory reset, I would remove the supercharge script and reapply it after the fact. Can you elaborate on the stock recovery... not sure what it was like on the X.
To pull up the Android Recovery, power off the phone, holding the volume down button power on the phone. Release both buttons when you see "Fastboot". Press the volume down button until you see "Android Recovery" and press both volume buttons. Not sure if this is the same as what you are looking for or not.

Ok, exactly what I was looking for. Should I also restore bloat or can that stay frozen?
Sent from my DROID X2 using XDA Premium App

If you restore with apps frozen, it will more than likely unfreeze them by default. I've never done a factory reset with frozen apps myself, but that is the going consensus. On a side note, if you want to leave the supercharge script in place, you can verify it is still running using the script manager after the reset. Setting up the supercharge script isn't very hard to do.

Alright thank you for the info sir. I always had a custom rom to depend on with my Fascinate so its a bit of a challenge with this one.
Sent from my DROID X2 using XDA Premium App

Related

"Quickboot" app on rooted GB X2. OK to use?

I used to use this app on my old phone (Rooted/ROM'd LG Ally). Would there be any issues with it on my new X2? I'm running Eclipse 0.1 with the custom recovery installed. I've hit the "Reboot" button and that works fine. I'm afraid to hit the "Recovery" button.
Why not try it and see? I don't think booting into recovery is going to harm you phone at all. It may just reboot and not enter recovery if that command is intended for CMR or it may enter Bootstrap Recovery. It's really hard to say because I have not used the program myself. No harm in trying. If something does go wrong just pull your battery.
yea you can use it. i use it all the time. if you download the app and go into settings, you can choose wich boots you can choose. by this i mean you can opt to take out the recovery option from the menu when you open the app.
Tried it out and it boots it to stock recovery but not the custom one. Thanks for the responses.
Sent from my DROID X2 using XDA App
matts175 said:
Tried it out and it boots it to stock recovery but not the custom one. Thanks for the responses.
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Try the same thing plugged into a wall charger.
Sent from your Mom's house using Tapatalk
mistawolfe said:
Try the same thing plugged into a wall charger.
Sent from your Mom's house using Tapatalk
Click to expand...
Click to collapse
Good idea. Just tried it and still boots to stock recovery. I found a widget on the market that's working out for me. Its just a simple reboot button.
Sent from my DROID X2 using XDA App
matts175 said:
Good idea. Just tried it and still boots to stock recovery. I found a widget on the market that's working out for me. Its just a simple reboot button.
Worth a shot...
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Sent from your Mom's house using Tapatalk
I think it's rather silly that the stock power button options do not include reboot. I mean, it has sleep for crying out loud.
zakth said:
I think it's rather silly that the stock power button options do not include reboot. I mean, it has sleep for crying out loud.
Click to expand...
Click to collapse
+1
Sent from my DROID X2 using XDA App

Soft Bricked, Please Help

I soft bricked my 4 hour new Razr. Was freezing stuff on Titanium and might have selected something I wasn't supposed to. Now When I boot it up, it just boot loops. What should I do?
Hard factory reset and got it up and past the set up screens, now getting FC's on something about my account, causing the homescreen to be blank and I can't do anything other than pull down the status bar.
You need to root... get a list of your system apps and compare them to a stock Razr (check the system dump) and then adb push /system/app whatever is missing
Sent from my DROID RAZR using xda premium
infamousjax said:
You need to root... get a list of your system apps and compare them to a stock Razr (check the system dump) and then adb push /system/app whatever is missing
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
It's rooted, but I can't access anything. Just stuck on the blank (black) screen with the status bar.
You can still use ADB
Sent from my DROID RAZR using xda premium

Need help! Screen not working

I need a way to pull all data from my phone. the screen turns on but is completely unresponsive in the middle of the screen so I can't type half the letters. Anyway to pull data from recovery?
Have you tried creating a backup from cwm?
Its not rooted, completely stock
Guessing you tried auto rotate? When mine went bad, I turned it on, and rotated every direction as needed. Worked for me. Kind of a pain, but allowed me to get all of my info......
Ya I tried, doesn't rotate
That's terrible. Sorry to hear.
The only other way would be a lapdock. I did that as well.
Have u tried adb pull?
Sent from my MB860 using xda app-developers app
ko_wei13 said:
Have u tried adb pull?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
no i have not, its what i was thinking to do but dont know what to type in to pull everything
What data that you want to pull out? Do u familiar with LINUX platform?
Sent from my MB860 using xda app-developers app
Mainly pictures And a few contacts. Pictures weren't saving on SD card unfortunately. No I'm not familiar with Linux
Try install airdroid and see whether u can backup from there.
Sent from my MB860 using xda app-developers app
If XP try android commander
Load it up and you will see all partitions for your phone. Tick sdcard or mnt/emmc and pull to pc
But may not work with you being stock and unrooted
Sent from my MB860 using xda premium
on my mums atrix the touch screen was unreponsive like mentioned but this went away after a while.... it could be a software issue
Do a restore from proper .SBF with rsdlite, this will reset back to factory ROM. If your problem was software, this will fix.
Consider unlock and use CMW...
Sent from my Atrix using Tapatalk2.

Razr ICS update causing unstable framerate

Before someone suggests factory reset, I have, and it's made no difference at all D:
Frames are now dropping all the time where on gingerbread they were fine. Small freezes in typing occasionally, very often scrolling lag as well as some laggy Temple Run and other games!
I have Autokiller and SetCPU running, turning them off and on doesnt appear to make a difference. What could be the cause?
Sent from my XT910 using xda app-developers app
Try to change the CPU Governor to Hot plug instead of Interactive.
On GB the default Governor was Moto Hotplug.
Sent from my RazR
Did you wipe cache during reset? You need to do that.
Would the cache not be wiped in a full data reset? If not, how should I go about doing this?
I have already tried Hotplug btw, no noticeable difference was made.
Sent from my XT910 using xda app-developers app
CaptainCalculus said:
Would the cache not be wiped in a full data reset? If not, how should I go about doing this?
I have already tried Hotplug btw, no noticeable difference was made.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
No, cache was not wiped. It's hard for me to type out how to do it from my phone.
Clear cache:
When phone is off, press and hold vol up + down together, and hold power button.
Press vol down to select recovery, press up to enter.
Press vol up + down together when u see danger android.
Press vol down 3 times to select wipe cache partition.
press power button to wipe.
Try...
In autokiller what setting do u use? Try to go higher (aggressive)
Also, turn on gpu rendering in developer setting under settings.
Keeping to interactive makes the phone smoother, which is why motorola uses that for the buggy ICS.
Lastly, install chainfire3d and set reduce texture quality for "jerky" games.
Okay, sounds like a plan. Just before I clear the cache, what are the side effects? Im obviously not an expert on this kind of thing, will it erase any data? Should I have done it at the same time as the data reset?
Ill try changing other settings again if this doesnt work, although there is no reason in the world why the Razr shouldnt play Temple Run at full settings!
Sent from my XT910 using xda app-developers app
Cleared the cache, no difference whatsoever.
Any other suggestions?
Sent from my XT910 using xda app-developers app
Any more input? This is really bugging me so I may try ROMing if no one has a clue, although I do like the Motoblur interface.
Sent from my XT910 using xda app-developers app
Mine is buggy too. Yesterday it kept opening Tango, text messaging, phone, email. When I pushed back button they would just open again like it was stuck. Then it proceeded to send random text messages to the last person I tested, just random characters. Thought about calling in for warranty replacement as I have factory reset like 5 times and removed a bunch of apps and ran clean. Browsing Internet is remarkably slower. Have to turn phone off at least twice a day.
Sent from my DROID RAZR using xda app-developers app

Help home key and back key flipped

CM7 DX2 No clue my back and home key decided to switch places any help?
Sent from my MB870 using xda app-developers app
116 Views and no response¿:what:
Sent from my MB870 using xda app-developers app
I dont know what causes that and I have never had that problem. But you can use a root file browser (I suggest root explorer) and navigate to /system/usr/keylayout/ and open the tegra-kbc.kl in a text viewer. Here, you can see what action each button is linked to. I'm attaching a screenshot of what mine looks like. Let me know if yours is the same.
I think so weird
Sent from my MB870 using xda app-developers app
Hmm. I dont know why it would be reversed then. I think I remember other people having this problem but I dont know much about it. It could be an app doing it. If you cant figure it out and its bugging you that much, maybe try booting into the CM7 recovery, wipe cache and dalvik and flash the ROM again. You shouldn't lose anything as long as you dont wipe data. Flashing the ROM again should put all your system files back in order though. Its worth a shot. Backup everything if you'd like though.
Lol I rsd sfb wiped flushed reloaded you name it... No clue
Guess I live with it? `
Sent from my MB870 using xda app-developers app
Really? I would think for sure that an SBF would do it if nothing else. That doesn't make sense. I have no clue then.
I was baffled too that's why I postEd in hope thanks n e way
Sent from my MB870 using xda app-developers app
this has been reported several times, but no real answer has been found, that I have seen
likely bad .sbf download
verify .sbf checksums with MD5 & SHA-1 Checksum Utility,(use to verify the hash/checksum to ensure the file integrity is correct with the matching file)
2.3.4 VRZ_MB870_4.5.1A-DTN-150-30_1FF_01.sbf MD5 Sum: B814E7086EEF6DF6CAFFC3763023B1AE
or try a different .sbf,
use ezSBF,
use 2.2, or 2.3.3 and take ota update
---------- Post added at 05:54 PM ---------- Previous post was at 05:52 PM ----------
or you can manually change them back with simple key remapping
read [Mod] Search button as Camera button (key remapping)
Checked and verified first & second download .
It seemed to happen quite a while after I thought it was stable unless anybody knows of a simple fix I'm just going say [email protected]$# it and leave it.
Ty ty I just flipped the #'s and problem fixed thanks for all your help
It happened to me SBF'n out of my worst brick yet with RSD Lite 5.3.1. I would see the "M" for not even 1 second before the screen read "FAILED TO BOOT 1". Luckily, our "M" load screen is default RSD mode even if your Dx² wont respond to the hard button boot commands, BUT IT HAS TO BE DONE ON RSD 5.3.1. to get out of this brick... only drawback is, home & back are switched. I bet once upon a time, anyone who has this flip, has used RSD 5.3.1
Sent from my MB870 using xda app-developers app
Nope rsd 5.7 newest I think but good guess
Sent from my MB870 using xda app-developers app
5.7 will unbrick the hardest of em from the mbm default logo? If so that's great ... cuz everyone I know that's hadda solid brick an used 5.3.1 to RSD had their keys flipped as well
Sent from my DROID X2 using xda app-developers app

Categories

Resources