Hello everybody, after the installation of the ROM tw008 and custom kernel 3.60 photos does not register and video does not work , somebody would have a solution?
I test all the goro's kernel and its always the same problem . Please help me!!
vinss68 said:
I test all the goro's kernel and its always the same problem . Please help me!!
Click to expand...
Click to collapse
I really want to help but unfortunately i don't know what to help you on:
But:
1: Did you install the ROM/kernel properly?
2: Did you try re-installing?
3: Did you try flashing stock firmware than Wolfbreak's ROM.
4. Did it work on stock kernel?
5. DID YOU MAKE SURE YOU DOWNLOADED THE RIGHT 3.60 KERNEL BECAUSE GORO PUT THE WRONG LINK? (oops caps)
Download the goro kernel again and flash it HERE
Hope this helps
Hello thank you for your reponse, indeed I tried some thing, and with the good kernel .
I have try:
- to make a fresh instalation of bb.67 and of the ROM tw008, then of the custom kernel 360 (by trying all the camera resolution, and play on frequence cpu, anything has to make its not working). I have not try to make a fresh installation of firmware via SEUS (I try it now!!)
-Camera is completely functional with the stock kernel , with z's custom kernel (22,23,05) and with custom kernel 3.47 when i was on tw7 bb52, but I prefere the ck 360 for the underclock and bb.67
- with and without the theme which I use
And camera make always her tantrums
Well I try the fraiche installation firmware and I informed
Works fine for me and everyone else using it...
Must be something you're doing
Just for information if it can help to resolve the problem, when I takes a photo the image gallery makes an black screen and when I want to pass in video mode the application makes a sudden closure
always similar after a full fresh installation of all.... i don't know what's the problem. i think i will wait a future kernel with underclocking and stay with z's kernel for the moment ,but if anyone got a idea or question about situation ...
vinss68 said:
always similar after a full fresh installation of all.... i don't know what's the problem. i think i will wait a future kernel with underclocking and stay with z's kernel for the moment ,but if anyone got a idea or question about situation ...
Click to expand...
Click to collapse
you might be flashing the wrong version of the kernel for your rom....
it's strange because all working fine, just this problem with camera . i trying to reorganize my sd card she's in a mess... maybe it's the cause of my problem.
some opinion?
I don't think its related to the rom or custom kernel. I've had this problem on some of the custom roms I've tried. What ultimately fixed it for me is by formatting the sd card so make a backup of your entire sd card then format it.
Sent from my X10x using XDA App
Good news,
my problem is resolved. Yesterday evening I completely cleaned my card sd then I left the telephone have it reconfiguré. I remake fresh installation rom tw008 and of the custom kernel 360 and hop all work fine. I think that the problem came because I tested several applications camera,background which created several files for photos,images, because which never clean .i am finally going to be able to take advantage of quite its hey hey.
Thx all to be interested in you has my case and sorry for my bad english
Related
Hi all,
I need some testers from all available roms for x10. From stock rom and all custom roms.
Cause there are many custom roms available and they don't use all the same recovery, it's heavy-handed to create update.zips who can used by everyone. If I count a few there are:
people with a 2.2 rom without the needed files for applying custom kernel
people with a 2.2 rom with the needed files for applying custom kernel
people with a 2.2 rom and xrecovery
people with a 2.2 rom and freexperiarecovery
and so on.
my aim is it, to have one update.zip, who works for all people, no matter if they have applied a custom kernel before or have this recovery and not those...
but i can't test all roms now, cause this would need time and nerves i haven't.
Because that, i made two update.zips:
First includes:
please test this first and if this works, flash the one with the kernel, that we know if there are problems, if they come from the recovery part or the uncompatibility between rom and kernel
chargemon file whos made for FreeXperiaRecovery
FreeXperiaRecovery
Requirements:
this zip should work on all basebands, but i generally prefer bb 2.0.52 from here with bb patch for 2.2 roms from here
Second includes:
chargemon file whos made for FreeXperiaRecovery and boots custom kernel as default
kernel folder: latest custom kernel (k006) with miniloader and splboot.ko files
FreeXperiaRecovery
wifi modules for 2.2 and 2.3 roms
Kernel k011/k012 changelog:
kernel 2.6.29.6
a lil more free ram
removed UV for 998Mhz (seems to be the cause reboots)
Fix FrameCap (Thank Z)
addded all mtd partitions (Thank Z)
volume fix
compiled with new gcc 4.4.3
changed SLAB alocator to SLOB
enabled swap support
added Tiny RCU
added UV/OC (k012)
added UC (k012.1)
FPS cap removed
fixed iptables
Requirements:
Flash the ftf bundle from the latest Cm 7 release with flashtool
Only for 2.2 roms: Basebandpatch 49 from here
Please test the update.zips on your rom (but make a backup before flashing, that you can restore anything if s.th. goes wrong) and report if it works on your rom, and don't forget to tell which rom you tested on.
before installing, make sure you comply the requirements
installation:
For users who haven't FreeXperiaRecovery yet:
first install FreeXperiaRecovery v02.zip
reboot into recovery
install latest version
now boot up system and enjoy
For users who have FreeXperiaRecovery yet:
install directly latest version
now boot up system and enjoy
Legend:
FX = FreeXperia
FXR = FreeXperiaRecovery
gb = Gingerbread
froyo = froyo
only wrote bin or xbin instead of system/bin or system/xbin
Link for first zip (only FreeXperiaRecovery):
FXR_v051.zip
Link for second zip (FreeXperiaRecovery and custom Kernel as default booted):
2.6.29.6_FX_k011+FXR_v0.0.8.2.zip
2.6.29.6_FX_k012+FXR_v0.0.9.1.zip
2.6.29.6_FX_k012.1+FXR_v0.1.0.0.zip
Install this for using the custom kernel with froyo (Thanks ! tsuyo.kou):
http://forum.xda-developers.com/showthread.php?t=1077437
mirror:
http://www.mediafire.com/freerecovery-kernel
I AM NOT RESPONSABLE IF YOU BREAK YOUR DEVICE OR DROP YOUR COFEE !
Notice:
this WILL BREAK DATA2SD and any enhancements/addon features provide by ur current ROM (thanks to DooMLoRD for the information)
All credits go to zdzihu, jerpelea, Bin4ry, Androxyde and all those involved in the FreeXperia project.
Cheers,
L
Trying it on Trips gingerbread MIUI ROM. I'll report back!
It booted, and OC works (setCPU)! Will try it for a while to test performance and battery.
Alright, the touch and animations is very smooth with this kernel. And WiFi works!
I'll use it for a while and see if it drains much battery.
EDIT: As it seems now it drains hella lot battery. :/ Even though im using the BOOST guide and screen of profile in setCPU. Will calibrate the battery a few times and see if it helps..
a1exander said:
Trying it on Trips gingerbread MIUI ROM. I'll report back!
It booted, and OC works (setCPU)! Will try it for a while to test performance and battery.
Alright, the touch and animations is very smooth with this kernel. And WiFi works!
I'll use it for a while and see if it drains much battery.
Click to expand...
Click to collapse
Is FreeXperiaRecovery working?
Downloading now
Im on J's CM7 v 16a incl k006
I know the kernel is inclu but i try urs and report back
Sent from my X10 using XDA Premium App
9Lukas5 said:
Is FreeXperiaRecovery working?
Click to expand...
Click to collapse
Havent tried, I have to go now. But i'll try it later!
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
MarylandCookie said:
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
Click to expand...
Click to collapse
+1
sent from my Z orignal and modded 2.2 powered c64
MarylandCookie said:
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
Click to expand...
Click to collapse
It is possible, but they don't do. So if my zip works on all roms, you can simply apply your rom how it is described in the rom thread and boot it to be sure the rom works and then flash my zip. If anyone make it that way in future, everyone would have the same recovery and you wouldn't have headache
MarylandCookie said:
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
Click to expand...
Click to collapse
+100000
@OP
please mention that this WILL BREAK DATA2SD and any enhancements/addon features provide by ur current ROM
EDIT:
@OP it would be better if u can create an update.zip to take backup of current recovery and then replace it with FreeXperia recovery... also u can create another "BackToStock" update.zip to remove FreeXperia recovery and then restore original recovery...
@ALL
REQUEST:
please keep reporting ur tests in the following thread....
http://forum.xda-developers.com/showthread.php?t=1018391
i just tested it on wolfbreak 6.1.3. v7 or 6.1 update and its a no go.. i get system forclose and once i wait it freezes system, and broke my xrecovery and also sim card doesn't work nor memory card. so again "HOUSTON" its a "NO GO"
wali01x said:
i just tested it on wolfbreak 6.1.3. v7 or 6.1 update and its a no go.. i get system forclose and once i wait it freezes system, and broke my xrecovery and also sim card doesn't work nor memory card. so again "HOUSTON" its a "NO GO"
Click to expand...
Click to collapse
Can anyone confirm??
same thing here with wolf rom. i'm gonna try trip's gingerbread rom.
edit : i confirm it's not working on wolfbreak rom.
tested on jerpelea's v15 stock, everything works except wifi which just shows error, xrecovery works fine.
no rebooting issues.
I have however been using this all day and battery life is good.
wali01x said:
i just tested it on wolfbreak 6.1.3. v7 or 6.1 update and its a no go.. i get system forclose and once i wait it freezes system, and broke my xrecovery and also sim card doesn't work nor memory card. so again "HOUSTON" its a "NO GO"
Click to expand...
Click to collapse
works fine here... but no bootanimation
use this...
http://forum.xda-developers.com/showthread.php?p=13022717#post13022717
on trip miui gingerbreab rom : stucks on SE logo , now i need to fix the phone with seus.
Same here. Also tried with TripMiui 1.0.4 on froyo too and same tesult.
Sent from my X10i TripNMiUI using XDA App
thor2002ro said:
works fine here... but no bootanimation
use this...
http://forum.xda-developers.com/showthread.php?p=13022717#post13022717
Click to expand...
Click to collapse
thor im gonna give it a shot later on thanks..
just have WLOD while restoring apps with titanium backup on Wolfbreak cm 6.1.3 V061
pd1: bluetooth dont work
ok, s.th. strange happened to me, i flashed the same zip again (i haven't edited the file or moved renamed, nothing) but after that second flashing, my recovery was broken too and i got a lot of fc's like described from many others. Now i wanted to flash freexperiarecovery without kernel to see if the problem is there or by the kernel, but can't get the zip file to work. So, I'm going to sleep now, maybe i can't see anything important at the moment cause i'm so tierd. But thanks for testing it yet on some roms
Hello everyone I have a problem with touchsreen on GingerCrust v2.3,
Firstly I want to say sorry because this question is supposed to be in development thread but, since I still have a less posts in this forum so I have to post it in this thread.
Okay this is the problem
I already succeed to flash the GingerCrust v2.2 via CWM 5.0.2.6
And I found there's no problem with touchscreen and then I did the GingerCrust v2.3
And i've got the touchscreen problem (the touchscreen strongly not accurate and hard to swipe for changing app drawer and desktop page)
I already tried to do touch screen calibration test via *#*#2664#*#* touch screen test
but the code won't work
and I tried to find additional framework on it's official thread(by nims11) but there's none of it.
Did anybody have a problem like me? Is there already a solution for the problem that I found
Thats new bug you phased not anyone tell about and not im phasing any that thing
v2.2 and v2.3 are almost same just few things like odexed and some fix not much other thing
I have this problem also.
It's most apparent when typing, because random keys will frequently touch itself, mostly the s and d keys.
For example, I write "I love you", it will turn out as:
"Ids sdldovsed ysdous"
or something like that. Very frustrating.
I really like Gingercruzt, but I'm unable to use it because of that touchscreen bug. I think it's a bug from CM7.2, since the J.A.F's and jusada's ROM also have this problem.
Sent from my GT-S5830
I got this too http://forum.xda-developers.com/showthread.php?t=1271268
I don't have that bug... did you flash the framework for v2.2 before flashing 2.3? maybe this dosn't afect to the touchscreen but just only to see what was your flashing process.
@CambaStorm I already tried flash the framework when in GingerCrust 2.2 (without framework Gingercrust v2.2 didn't have bootloop) with frameworkgcv2.2.zip , but after flashing the framework, I had the bootloop everytime v after that i flash again with Gingercrust v2.3 and i got the touchscreen problem but the bootloop already solved.
@nims11 thanks for the reply, I want to ask some questions to you. Is there additional framework for Gingercrust 2.3 or the framework for 2.2 still valid in 2.3? I mean if I want to upgrade from 2.2 to 2.3, is it required to flash the framework again? or the GC 2.2 that you post in http://forum.xda-developers.com/showthread.php?t=1324628 already have modified framework inside? Thanks nims!! I really want to try the GC v2.3 by the way it's really a very great work of you!!
@adinq yeah I have the same problem in GingerCrust v2.3 just like your video in your thread
acesteady said:
@CambaStorm I already tried flash the framework when in GingerCrust 2.2 (without framework Gingercrust v2.2 didn't have bootloop) with frameworkgcv2.2.zip , but after flashing the framework, I had the bootloop everytime v after that i flash again with Gingercrust v2.3 and i got the touchscreen problem but the bootloop already solved.
@nims11 thanks for the reply, I want to ask some questions to you. Is there additional framework for Gingercrust 2.3 or the framework for 2.2 still valid in 2.3? I mean if I want to upgrade from 2.2 to 2.3, is it required to flash the framework again? or the GC 2.2 that you post in http://forum.xda-developers.com/showthread.php?t=1324628 already have modified framework inside? Thanks nims!! I really want to try the GC v2.3 by the way it's really a very great work of you!!
@adinq yeah I have the same problem in GingerCrust v2.3 just like your video in your thread
Click to expand...
Click to collapse
moded framework allready gave in rom
touchscreen prob of keypad you tell is not happen atall in my phone
Im reply all things from my phone not from pc means not phasing that stuff yet
will try to solve for those phasing in new version
adeklipse said:
I have this problem also.
It's most apparent when typing, because random keys will frequently touch itself, mostly the s and d keys.
For example, I write "I love you", it will turn out as:
"Ids sdldovsed ysdous"
or something like that. Very frustrating.
I really like Gingercruzt, but I'm unable to use it because of that touchscreen bug. I think it's a bug from CM7.2, since the J.A.F's and jusada's ROM also have this problem.
Sent from my GT-S5830
Click to expand...
Click to collapse
thanks for the quick reply nims, just info for you the bug that I found is just exactly the same as adeklipse said
acesteady said:
Hello everyone I have a problem with touchsreen on GingerCrust v2.3,
Firstly I want to say sorry because this question is supposed to be in development thread but, since I still have a less posts in this forum so I have to post it in this thread.
Okay this is the problem
I already succeed to flash the GingerCrust v2.2 via CWM 5.0.2.6
And I found there's no problem with touchscreen and then I did the GingerCrust v2.3
And i've got the touchscreen problem (the touchscreen strongly not accurate and hard to swipe for changing app drawer and desktop page)
I already tried to do touch screen calibration test via *#*#2664#*#* touch screen test
but the code won't work
and I tried to find additional framework on it's official thread(by nims11) but there's none of it.
Did anybody have a problem like me? Is there already a solution for the problem that I found
Click to expand...
Click to collapse
I have exactly the same problem. The cause of his OC kernel is unfortunately in some lucky so forth. I asked about this before but no one knows the solution. The only way that works is throwing a kernel that is nonOC "cm-7.1-kernel-2.6.35.7-perf-CL562111.zip" from this topic. http://forum.xda-developers.com/showthread.php?t=1296905 and the problem is gone.
icemanhi said:
I have exactly the same problem. The cause of his OC kernel is unfortunately in some lucky so forth. I asked about this before but no one knows the solution. The only way that works is throwing a kernel that is nonOC "cm-7.1-kernel-2.6.35.7-perf-CL562111.zip" from this topic. http://forum.xda-developers.com/showthread.php?t=1296905 and the problem is gone.
Click to expand...
Click to collapse
And "#throwinag##"% fthus akernael wdill make it wsorks,h rigsht?
This is the text that I typed without any correctionss
And "throwing" thus kernel will make it work, right?
Sent from my GT-S5830
Sorry for the dopost.
I think I've figured out why the touchscreen is acting up (thanks to icemanhi, I'll be pressing that thanks button when I get on the computer). It does have something to do with the OC kernel, but not specifically because of it.
I underclocked my device to 700MHz, and the problem dissappeared. I OCed it to just above 800, and would start seeing it again. I OCed all the way up to just under 900, and it was very apparent.
So possible solutions are:
1. Underclock to <800MHz (for max clock)
2. Flash ketut's regular, non-OC kernel (link provided by icemanhi).
Sent from my GT-S5830
adeklipse said:
Sorry for the dopost.
I think I've figured out why the touchscreen is acting up (thanks to icemanhi, I'll be pressing that thanks button when I get on the computer). It does have something to do with the OC kernel, but not specifically because of it.
I underclocked my device to 700MHz, and the problem dissappeared. I OCed it to just above 800, and would start seeing it again. I OCed all the way up to just under 900, and it was very apparent.
So possible solutions are:
1. Underclock to <800MHz (for max clock)
2. Flash ketut's regular, non-OC kernel (link provided by icemanhi).
Sent from my GT-S5830
Click to expand...
Click to collapse
I take the 2nd solution..... underclock????? i think flash non-oc kernel is better than that
matur nuhun.......
acesteady said:
I take the 2nd solution..... underclock????? i think flash non-oc kernel is better than that
matur nuhun.......
Click to expand...
Click to collapse
Yep, I went with flashing the non-oc kernel as well. Underclocking will still leave you with the problem.
Sami-sami.
*ane orang Banjar nyasar ke Bandung, gan.
Sent from my GT-S5830
I use 800 MHz on oc kernel and not facing this problem.. maybe I'll try above 800..
1. Underclock to <800MHz (for max clock) THIS SOLVE PROBLEM
2. Flash ketut's regular, non-OC kernel (link provided by icemanhi). THIS NOT
Can somehow fix this without reducing the MHz to 700?
adinq said:
1. Underclock to <800MHz (for max clock) THIS SOLVE PROBLEM
2. Flash ketut's regular, non-OC kernel (link provided by icemanhi). THIS NOT
Can somehow fix this without reducing the MHz to 700?
Click to expand...
Click to collapse
Yes: reduce to 800MHz. Though I still have some problems with that.
Sent from my GT-S5830
I also have the same Problem.
It was all fine with froyo 2.2, when i switched to stock 2.3.3 kpe or 2.3.4 kph this problem occured. It stopped happening with 2.3.3 kpy and its perfectly fine with the 2.3.5 stock firmwares.
My big problem is, i cant use any custom roms, it happens with every single custom rom.
So it's not really a warranty issue when it happens with custom roms. Coz samsung could say it works fine with stcok firmware, 2.3.3 kpy for example.
I really don't know what the cause of the problem is, because my friends galaxy ace doesnt have these problems with the custom roms i tried.
I'm not sure but besides the kernel i kinda think it might be a battery issue, because it happens less frequently when its plugged to the charger.
adeklipse said:
Yes: reduce to 800MHz. Though I still have some problems with that.
Sent from my GT-S5830
Click to expand...
Click to collapse
may be this mod can help you..
http://forum.xda-developers.com/showthread.php?t=1365434
i OCed to 883MHz without problem on touchscreen
matur nuwun
aku wong solo bro...╋╋ム ╋╋ム ╋╋ム =)) ╋╋ム ╋╋ム ╋╋ム
pls press thanks button if you like this.
sorry for my bad english
Hello there
Here is the the CM11 made for X10
Still be in alpha 1 as not everything's working
Nearly same bugs as Evervolv 4.4.2 as bugs are due to kernel
Recovery access is working, sdcard mount only in recovery .
To download the ftf file it's here
To enter recovery mod :
wait the 2nd vibration
tap the screen
Don't forget to check "no final verification" in flashtool
Sources are available here on github
Only for unlocked bootloader device
First boot can be long, but cpu frequency is 998 so no problem with oc
Credits : CM Team, FXP for initial repo (tell me if I forgot someone
Good job.
"Envoyé depuis mon C6903 avec Tapatalk"
Tof37, you're the best!
Thanks How about 2.6 kernel? It will act better definetly.. Wish to see what kitkat could realy do on x10..
Thanks a lot
FeraVolt said:
Thanks How about 2.6 kernel? It will act better definetly.. Wish to see what kitkat could realy do on x10..
Thanks a lot
Click to expand...
Click to collapse
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Tof37 said:
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Click to expand...
Click to collapse
as you can see the SurfaceFlinger is the problem ..
W/SurfaceFlinger( 1182): getting VSYNC period from fb HAL: 6535947
W/SurfaceFlinger( 1182): no suitable EGLConfig found, trying a simpler query
F/SurfaceFlinger( 1182): no suitable EGLConfig found, giving up
F/libc ( 1182): Fatal signal 6 (SIGABRT) at 0x0000049e (code=-6), thread 1182 (surfaceflinger)
chack your sources..
Tof37 said:
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Click to expand...
Click to collapse
Thanks dude.. I know my kernel boots but without display.. I said that graphical part needed to be updated to work on 4.x roms since current kernel setup is very "mutant" (GB KGSL - new FB - Tripple Buffering - 32bpp & many many more things..). You may just try to replace whole KGSL and Video/MSM folders with board config & misc updates from scritch v21 kernel.. we will loose 32bpp.. but i think it will be enough... one more thing.. I didn't updated msm_mdp.h it's old. because new verion starves double more PMEM than default and returns black & white camera.. so my video folder is tuned that way.. So i believe it's totally kernel fault.. BUT this setup works perfectly on GB. Maybe you realy can bypass/modify current surfaceflinger.. since current kernel setup is that what i realy want to see in 4.x roms.. I belive that there we will have HW video recording working super fine..
Also I wish to advice you LegacyXperia CM11 sources.. This project is created to be close as much as possible to original CM11 development but is optimized for legacy xperia devices (2011)(things like default browser..torch..data..etc).. Thank you very much...
Boots without problems.
Attached the following dmesg log.
If there's something you're looking for in specific let us know.
Thank you for your ongoing hard work.
Finally got sdcard mount and ums working... will update device tree later .
Got boot with an "old" 2.6.29 kernel.
Have to fix wifi and bt now....
Sent from my XT890 using xda app-developers app
Maybe this is just me, or does anyone also have their sdcard almost wiped out while using this ROM? I'm not sure what caused it, but all that I know is that a lot of my files are missing ever since I booted into this ROM. I remember wiping the data with the recovery from this kernel, but again, I am not sure if that is the cause of it. If not, it might be something else that I did before that, that is why I need to know if anyone else experienced the same thing as me.
I'm not expecting anything from a pre-alpha build, but the fact that it boots and we have a hope alone fascinates me.
Hzu said:
Maybe this is just me, or does anyone also have their sdcard almost wiped out while using this ROM? I'm not sure what caused it, but all that I know is that a lot of my files are missing ever since I booted into this ROM. I remember wiping the data with the recovery from this kernel, but again, I am not sure if that is the cause of it. If not, it might be something else that I did before that, that is why I need to know if anyone else experienced the same thing as me.
I'm not expecting anything from a pre-alpha build, but the fact that it boots and we have a hope alone fascinates me.
Click to expand...
Click to collapse
Strange issue ... didn't noticed that ...
As sdcard was only recognised and mounted in recovery + you may have app installed on your sd, wiping data should be the cause.
Can't be rom installation cause sd is not mounted / recognized in user land.
As Hzu asked, did someone else had this issue ?
Tof37 said:
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
No it must have been something in his phone, i did not have any problems, rom buted fine, and when i returned to feras v37 everything was ok.
Tof37 said:
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
I also do not have any problem with this ROM. Some thing is wrong with him..................................
Kornelije23 said:
No it must have been something in his phone, i did not have any problems, rom booted fine, and when I returned to feras v37 everything was ok.
Click to expand...
Click to collapse
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Dr Goodvibes said:
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Click to expand...
Click to collapse
How good is that room compaired to feras v37, i have tried x10s v9 a long time ago, so is it worth trying it again ?
Tof37 said:
Strange issue ... didn't noticed that ...
As sdcard was only recognised and mounted in recovery + you may have app installed on your sd, wiping data should be the cause.
Can't be rom installation cause sd is not mounted / recognized in user land.
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
Kornelije23 said:
No it must have been something in his phone, i did not have any problems, rom buted fine, and when i returned to feras v37 everything was ok.
Click to expand...
Click to collapse
kamalyaadav said:
I also do not have any problem with this ROM. Some thing is wrong with him..................................
Click to expand...
Click to collapse
Dr Goodvibes said:
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Click to expand...
Click to collapse
I see, thank you for your responses. Something must have happened before I flashed the ROM. Well, a lot of things happened, but I'm glad it's not this ROM that caused it.
Kornelije23 said:
How good is that room compaired to feras v37, i have tried x10s v9 a long time ago, so is it worth trying it again ?
Click to expand...
Click to collapse
um since this alpha alot of things dont work like the wifi/camera/audio/bluetooth/many applications.......and as such is not suited for daily use but its snappy and for a alpha is quite stable .
Any progress bro ????????
or we should forget about this rom, because this is too much wait.
Can someone tell what work/doesn't work, wifi work?
Adigo18 said:
Can someone tell what work/doesn't work, wifi work?
Click to expand...
Click to collapse
Well ...
As wrote in op the rom boots, calls sms mms seem to work but wifi not ...
No camera and many other things don't work.
Since may didn't made any progress with kernel / kitkat based rom due to personnal reasons.
However, this project is not stopped, just can't when I'll be able to do work on it ... sorry
hi guys. i´m trying to put my i9305 LTE the best mp3 player that i can get. i read that are some kernels (siyha) that has audio adjustments that "boosts" the sound, but o confess im really noob with flashing kernels and im afraid something goes wrong..
currently, i run CM11 nightly, but i can also run the CM10.1.3, i don't care about the android version on the phone...and i only "know" cyanogen mods.
so, i ask, is there any rom that as built in some kernel like siyha (i read that boeffla does the "same") that i can just flash the rom and complete my golds for sound?
i searched and searched but really i do know any other rom´s by using them...maybe someone with more experience can help me..
thnks
dont really need a kernel for that just go to the market and install viper4android or go here to the official viper4android site on XDA. It will amp your sound easily without having to have a new kernel
scorpiolm said:
hi guys. i´m trying to put my i9305 LTE the best mp3 player that i can get. i read that are some kernels (siyha) that has audio adjustments that "boosts" the sound, but o confess im really noob with flashing kernels and im afraid something goes wrong..
currently, i run CM11 nightly, but i can also run the CM10.1.3, i don't care about the android version on the phone...and i only "know" cyanogen mods.
so, i ask, is there any rom that as built in some kernel like siyha (i read that boeffla does the "same") that i can just flash the rom and complete my golds for sound?
i searched and searched but really i do know any other rom´s by using them...maybe someone with more experience can help me..
thnks
Click to expand...
Click to collapse
Every good kernel has an Instalation Guide. Follow this steps and no problem
You must find compatible kernel.
Also you must find that kernel include app or you must use Aroma installer to change anything
verny94 said:
Every good kernel has an Instalation Guide. Follow this steps and no problem
You must find compatible kernel.
Also you must find that kernel include app or you must use Aroma installer to change anything
Click to expand...
Click to collapse
I tried cm 10.1, omnirom, ct-rom and with these roms if i flash boeffla nothing happens, if i flash agni stays in bootloop..
The only rom that has what i need(kernel)is amsha but i hate the design :/
To flash a zip kernel is not the normal procedure in cwm?
scorpiolm said:
I tried cm 10.1, omnirom, ct-rom and with these roms if i flash boeffla nothing happens, if i flash agni stays in bootloop..
The only rom that has what i need(kernel)is amsha but i hate the design :/
To flash a zip kernel is not the normal procedure in cwm?
Click to expand...
Click to collapse
With Agni, you'll have to flash a custom recovery thats able to run f2fs (check the thread, you'll be able to find a link there)
If you get the chance I'd check out SOKP, Milestone 2 is a bit buggy at the moment but they're rolling out MS3. Where most of the bugs are fixed.
Thats part of the reason why SOKP has such a huge following haha
Good Luck!
-- edit --
On the i9305, the boffela kernel + the control app (you can find it on LordBoeffla's website for free) will let you "amplify" the sound. Youll find this under the sound's tab in the boffela control app.
For the best audio, try to tweak it so then you get the minimum background "hiss" [set the android master volume around 80-90% then drop the boffela volume to an acceptable level for your earphone/headphone]
(From a semi audiophile's POV, you're better off getting a dedicated DAP if you're using the i9305 only as an Audio player. If you dont have that much music, you may want to try and stuff all of it on the on board storage as running it off the MicroSD may deter audio quality [from bottlenecks and what not])
thnks for all your helps after trying and trying, i managed to flash c-rom, and the agni kernel, i did not test exaustly but i think its this im looking for...a rom seemed like cyanogenmod and a sound tweak option...the only "problem" for now is i cannot update to the last version of c-rom, i will try to read all the posts on the right section to figure out whats happening...
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Hi eXperts,
last month I flashed the great Ultimate HD rom, so stable and now my wonderful Xperia pro is much faster
Before to do that anyway I used Mount2SD app to get my external sd mounted and solve, in this way,
common issue about "memory unavailable" and similars when I tried to add or update an app.
Now , Mount2SD is no more working, with no log entries, even if detailed debug verbose is enabled; first
I was thinking there is issue with Init.d support... But it sounds strange because before UHD I used the original stock rom by sony,
rooted of course, and furthermore I checked with a tool (embedded inside universal Init.d) and it shows me that Init.d support
is green and working....
So, looking beyond, my question is how to definitively solve this issue, changing kernel or something else
and give my phone support to mounting external sd native. Which kernel may I flash ? Working together with UHD?
Fast?
My phone is mk16i and must keep physical keyboard working, cwm, rooted.
Will this operation break my current configuration in terms of installed apps and so on?
My Xperia pro is unlocked bootloader.
Thank you very much in advance!!
Click to expand...
Click to collapse
XperiaPro55 said:
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Click to expand...
Click to collapse
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
XperiaPro55 said:
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
Click to expand...
Click to collapse
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Grof87 said:
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Click to expand...
Click to collapse
Hi Grof,
flashing stock GB/ICS does not help. I use stock kernel since the beginning... and no stock kernel
is able to mount sd-ext file system in order to use sd as a natural extension of internal memory.
As I wrote in the beginning I already reached out result I want, using Mount2Sd with stock kernel but now
I want to solve with a new full featured and modded kernel that embeds useful functionality just like CWM and
of course internal memory extension using sd-ext filesystem..
That's the point.
My sd card is perfect, nothing to complain and working like a charm! I "only" need the first part.
Regards
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Grof87 said:
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Click to expand...
Click to collapse
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
XperiaPro55 said:
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
Click to expand...
Click to collapse
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Grof87 said:
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Click to expand...
Click to collapse
Hi, I know the rules.
I am asking if you can help me understand which ROM is ready for UHD cause, of course, I already read the post and found
different suggestions but regarding other models. That's the point, because Xperia Pro is a particular phone with physical keyboard for e.g.
and also looking at different kernels inside its dedicated thread I was not able to understand which kernel is already developed
and patched on ICS and there is features matrix.
Finally I need to know if, installing selected kernel, I will loose something or not
I am not interested and I am not asking "which is the best rom for my phone ?"
Bye