i instaled andread 2.3.4 on my xperia x10 mini pro and its now stock at sony ericson logo,how do i fix this?
Like me!
It didn't run too, and appeared always the Sony Ericsson screen. Then, i installed the 2.2 andread version, and it's the best rom i've seen: after repair the spanish keyboard and install my favourite programs, it runs perfectly, the 5 megapixels of the camera work and it doesn't waste a lot of battery
Can you boot into recovery?
If yes, then download some other rom to ur sdcard and flash it with a complete wipe!
If no, then flash it using SEUS!
Hi, I now have the same problem with my x10mini.
I tried to put in the latest cyanogen rom (http://forum.xda-developers.com/showthread.php?t=1051678)
and now I'm stuck at the first logo.
I cannot:
- Reboot/Turn off
- Boot
- Go into CWM using back-button a couple of times.
I can:
-
-
-
At this state, the USB has been both unplugged and plugged while trying to boot it.
I have tried all sorts of keycombinations.
I have tried CWM-installer (since it although puts phone in reboot)
I some how managed to enter the CWM-state 50-100 reboots ago.
Gave up 20 tries later.
I have spammed the back-button while booting both 20 per second and 1 per second.
Nothing works.
I do realize its bricked. The thing I might've done is installed the rom zip two times.
The first try after finally (being unabled to enter CWM in the first place) entering CWM mode to install the rom zip it just wouldnt boot past the bootscreen (this very, much annoying screen I'm stuck at now) so I tried entering CWM mode again, managed to and installed the zip again.
The mistake there might've been that I never reseted the phone before I did the second install.
Am I doomed to throw the phone in the garbage?
Reflash using SEUS
i have'd the same problem and i flash it
Tip: to install andread v7 install sony bread its the same but sony bread 4 is working, i don't know how to install andread but in sonybread install first ver. 3 then install v4
DO NOT WIPE USER DATA
Related
I tried installing CM7.1 last night but after i carried out all the steps and installed update.zip, the phone said something like recovery seems bad when i tried to reboot my device. It was either reboot with bad recovery or restore current recovery, i restored the first time and reinstalled CM7.1 but the same happened so i went with reboot with bad recovery and they said you might not be able to reboot into recovery, so after the reboot i got stuck on the Sony Ericsson logo, and none of the methods (SEUS, x10 flashtool, or the battery method) work. I couldn't find a solution anywhere. Is there a way i can possible reach xrecovery via my SD Card or something?
Thanks in advance.
I had mine stuck at the logo too, but I managed to flash it with flashtool by pressing the top and middle button (to reset the battery) and then press the back button to set the phone to "flash mode". It's kind of tricky but I'm sure you'll get it after a couple of tries (you should see the green light go on).
Get a stock .tft for your mini, the run flashtool. If it won't work try different versions of flashtool and also install Gordons Gate to make the drivers detect the phone.
I'm pretty sure there is no such thing as a "bricked" phone. If you can get into "flash mode" you should be able to recover the phone.
Good luck!
Thanks alot..
I tried using the old SEUS update service (i had a setup file) and it worked, my phone is now working
I recently found a thread that I posted this question to, but I did not get an answer, so I'm posting it here, for a bigger audience.
I was trying to install an another rom to the X10 Mini with clockworkmod installed. When the installation finished, cwm said that its installation had been damaged. I selected the option to fix the problem and after that the phone just restarted and went broken.
My phone doesn't even show the boot animation, it just has the sony ericsson logo, it doesn't stay off and when restoring with flashtool I get the message Error flashing. Aborted.
First, the phone stays in the flashing mode only when I keep the back button pressed, but after a failed flashing attempt it stays in the mode (without pressing the back key and with the green led on) and when I try flashing again, it fails after a while.
What would this be about? And what can I do to recover my X10 mini?
Do you happen to know if there's a confirmed working flashtool for the 2.1 update and x10 mini (not pro) OR another failsafe method to fix the phone somehow when even the recovery doesn't work?
Have you tried SEUS?
Restore your phone using Pc Companion or seus and then read every instruction 20 times, before doing anything. The only reason for errors is that you didn't do everything right.
Sup guys!
Im so down, because i hade 2 days ago CWM 7.2.0 1.0.8 on my Xperia Mini Pro and i was bored so i just got the CM 9.0.0 1.1.1 and if just seen on it that my battery goes very fast down on that rom the camera is bad and no flashlight working so i choosed the HYBROM v14 and got the .KRsH Kernel v3.0 (MiniPro) and flashed the HYBROM v14 and it didnt work. I turn on my phone it vibrates i see the boot logo after 3 minutes it show me a black screen and then it restart again and do it allways the same if tried it with CM 9.0.0 1.1.1 boot.img with nero droid boot.img and with rage kernel boot.img and it happens allways the same on some kernels i cant enter the CWM. I tried with flashtool to got the 62. kernel from XperiaMiniPro_4.0.2.A.0.62_SK17.ftf and it doesn do andything now i tried three times to flash SK17i_4.0.2.A.0.62__1251-0103_.ftf but it is allways the same it freezes at sony ericsson logo and then after some time i got a black screen and then it restart.
What should i do please help me
I need my phone so early !
1.Have krsh kernel
2.do full wipe, clear cache
3.clear dalvik
4.in mounts and storage,do format system,format data,format cache.
5.Install the rom.
perhaps it'll work..
But before i try to do this, i have to say if tried to set back my phone with WotanClient i cant use SEUS because i have unlocked the bootloader.
So if done it but it starts with Virbation and Sony Ericsson Logo after 2-3 Minute it's black with backlight on and after 30 sec. it restarts again all the time.
But thx ill gonna try it.
EDIT://
No it didnt work because i cant enter with krsh kernel not with 1.6 or 2.0 the CWM so if tried it with the x kernel and i can enter the CWM but i tried it like u said but it doesnt change anything after boot logo it freezes gets quickly phased black and restarts.
First download the custom ROM .zip file and place it on the root of your SDcard.
Then install the kernel you have chosen via Flashtool or fastboot.
Then you will need a ClockworkMod Recovery(or any other recovery, but this is the most popular). Some kernels have it already built in, check in the kernel description.
Next, enter the Recovery by pressing volume down button many times, when phone boots and screen goes brighter. Then make factory reset, wipe cache and Dalvik Cache(last one is under Advanced). Then install zip from sdcard and choose your ROM's zip.
Oh, and if you don't know, which kernel to choose, then for Hybrom ROM should Rage Kernel and X Kernel work, I have had both on my LWW, both were good.
Yeah dude but i know how to do that all but it even dont boot it doesnt matter wichs rom or kernel i choose it allways stuck and sony ericsson logo and then it gets black and restarts.
If tried 2 firmwares with WotanClient and tried to flash a firmware.
It's just the same all the time.
What to do?
****ing damn ****.
My battery is empty and i cant charge my phone :/
The green led just blinking every 10 seconds quickly and when i try to turn it on it just vibrates and thats all.
What to do?
Does just anyone can help me pleeeease !
If you install a custom kernel, then, depending on the kernel of course, mostly you don't get the Sony Ericsson Logo.
So, you might be doing something wrong there with the kernel, as it doesn't get installed and that causes the problem.
Ok it do it like this:
- I go to my fastboot folder
- I have there:
* adb.exe
* AdbWinApi.dll
* AdbWinUsbApi.dll
* boot.img (the one wich i want)
* fastboot.exe
- I hold shift and click the right mouse button and press command prompt..
- i enter in the cmd: "fastboot -i 0xfce flash boot boot.img" because "fastboot flash boot boot.img" dont work it never worked for me
- i wait till its done
- i unplug it
- i start my phone its not working
And now i cant do something because my battery is dead and i cant charge it
When you use custom kernel like krsh rage or x, they'll have offline charging.. U just plugin your charger(not usb) it'll charge i guess so...
If flashed my phone again with Wotan and now i can charge it.
But its stucking at Sony Ericsson logo when it try's to charge.
And boot is again ****ed it justs like all the time freezing allways and then black and restart.
Is there a way to check whats broken or to set it back with a another way?
EDIT://
I flashed
- Xperia_Relock_bootloader.ftf then
- SK17i_4.0.2.A.0.62__1251-0103_.ftf and at last
- XperiaMiniPro_4.0.2.A.0.62_SK17.ftf
Not i can run the SEUS it says i have the newest version but i pressed install.
I hope it will fix the problem
EDIT2://
****ing damn **** -.-
Its like all the time the same ****.
Why cant anyone help me
#Push​
Help please..
did you tried to flash any other firmware (eg. Stock 4.0.A.2.368) via flashtool?
try also to flash stock krenel, then relock bootloader and restore the firmware via PCCompanion
By the way, did you unlocked your device with test point or official method?
maybe both of them?
I unlocked my phone with the offical method and relocked it with Xperia_Relock_bootloader.ftf and it worked.
But when i flash my phone with Wotan and SEUS then my phone should be like i buyed it new or not?
Sorry for my terrible english.
EDIT://
I cant find any ftf for download, the only ftf wich i found for download was "SK17i_4.0.2.A.0.62__1251-0103_.ftf" and all other if downloaded with Wotan..
JDMStar said:
I unlocked my phone with the offical method and relocked it with Xperia_Relock_bootloader.ftf and it worked.
I cant find any ftf for download, the only ftf wich i found for download was "SK17i_4.0.2.A.0.62__1251-0103_.ftf" and all other if downloaded with Wotan..
Click to expand...
Click to collapse
Got It!
you should lock BL ONLY with 0.368 stock FW
I will give you links soon.
wait about 30 minutes...
Ok
If flashed my phone with Wotan to "Stock 4.0.A.2.368" but no improvement. :/
And i cant change my boot.img anymore cause its locked ****..
Great) try to unlock BL again (official)
re-install 368 (to be shure its installed)
then apply this stuff with flashtool
kadr said:
Great) try to unlock BL again (official)
re-install 368 (to be shure its installed)
then apply this stuff with flashtool
Click to expand...
Click to collapse
Thx but i dont helps
It just freezing at Sony Ericsson Logo..
even with 368 ?
did you tried to launch it with opened/closed BL ?
Yeah with 368, it doesnt mateter if i start my phone with locked bootloader or without :/
what was the reason?
what was the last working configuration?
what changes you did?
Hi,
At start:
I own Xperia Pro with root 2.3.4, my target is to get root ICS.
Tried stuff from here: http://forum.xda-developers.com/showthread.php?t=1445819
also from here, 2nd post is for Pro: http://forum.xda-developers.com/showthread.php?t=1683957
So, first link - im installing CWM from market, i used recovery to install CM9 with "success" but when phone started, and i've restarted id 3 times, i still got 2.3.4. Im just doing "install from zip" or something like that in recovery. At this moment, ive got problem to enter recovery. I made a full factory, reinstalled CWM and i still cant get it working. Anyways, when i get recovery menu working, how should i use that ZIP to install it? Rly, i cant...
From 2nd link, when i use method B for PRO, after step 1, flashing "ready to root" ICS, remove battery, power on, leds flash on, then i connect to PC, start doomlord root and it hands on "starting daemon" or sth like that. So its not getting rooted. How do i fix that?
After installing puriness trough recovery from this topic: http://forum.xda-developers.com/showthread.php?t=1780473
I got only black screen when phone is starting...
OR is there ANY other method, to at last get ICS with root working on my PRO? I've used also many methods from other forums, and still not working. Im getting angry at this moment :/
At last i've done root on ICS, but using other files than those from tutorials.
But now there is another problem - i cant manage to get recovery menu working fine - it starts when it want, volume down/up key does not work while starting phone, but after couple restarts, when i dont need recovery menu, its starting sometimes.
Now i wanted to flash trough CWM other rom, but i cant start recovery again...
Hi everyone. Can anyone help me figure out what's the problem that i cant boot into CWM. I have Neo MT15i running FINE with stock rom ICS .587, locked bootloader and rooted. I also installed x-Parts as well as CWM 5.5 and busybox 1.20. But my problem is that my phone just cant boot into CWM recovery no matter what i did either press and release volume - continuously when "SONY" logo appears, or using x-Parts function to boot into recovery. It just ends up stuck at "SONY" logo (I waited for about 10 minutes but no respond)
You have to press Back button while booting from Sony Logo to boot into CWM.
svprm said:
You have to press Back button while booting from Sony Logo to boot into CWM.
Click to expand...
Click to collapse
When should i start press the back button? during or before Sony Logo appear?
During Sony Logo appearing.
svprm said:
During Sony Logo appearing.
Click to expand...
Click to collapse
nope, cant boot into recovery also, i still stuck at Sony Logo just like usual ==" is it the kernel problem? shud i upload a screen shot of my kernel version?
Try installing Recovery again by this method:
http://forum.xda-developers.com/showthread.php?t=1364509
i root-ed my neo few weeks ago and everything worked normal until i changed heap on VM Heap Tool ... i chandeg it from 52 to 40 and when i booted mobile phone it's stuck on sony logo... it's kinda looping all the time and i can't turn on my mobile at all, i must take battery out to stop that logo appearing and disappearing
Sir please help me
When I flash new Rom in Xperia neo v.Every time my clockwork recovery deleted
xange said:
Hi everyone. Can anyone help me figure out what's the problem that i cant boot into CWM. I have Neo MT15i running FINE with stock rom ICS .587, locked bootloader and rooted. I also installed x-Parts as well as CWM 5.5 and busybox 1.20. But my problem is that my phone just cant boot into CWM recovery no matter what i did either press and release volume - continuously when "SONY" logo appears, or using x-Parts function to boot into recovery. It just ends up stuck at "SONY" logo (I waited for about 10 minutes but no respond)
Click to expand...
Click to collapse
same problem for me...xperia neo v
Hello.
I have a similar problem, if not identical. I rooted my MT15i today hoping to install a custom ROM I found in this forum.
Everything went fine. I rooted the phone and installed Clockwork Mod Recovery properly.
Then, I downloaded the rom .zip, placed it in /sdcard, made a backup of my current system, wiped data/ full reset and installed the ROM with SUCCESS, as it said in the log.
After that, I rebooted the phone and now it keep stuck in the "SONY" boot screen and won't change no matter what I do.
But I think I know why did this happen. I was following a tutorial found in another site. There was listed only to wipe data and full reset, and not to wipe danvik and cache, as I came to read after I was stuck in the boot screen.
The problem is that now I can't even get to the Clockwork Mod Recovery screen, even if I start the phone holding volume down button (or reset, or any other button the phone might have).
The only thing to do is removing the battery. After starting again, it gets stuck again in SONY screen.
When I plug the phone into my PC, nothing happens. It doesn't get recognised.
It only turns on and stops at the SONY screen again.
I wonder if there's a way to access the Clockwork Mod Recovery menu or some way to return the phone to the stock settings.
Or is it a possible brick?
Thanks for the help already.
Ps.: sorry for the long post.
First of all don't worry your device is not broken
And not every custom Rom support locked bootloader
The reason you can't access cwm because you wiped data
I think you can restore your phone by reflash firmware using flashtool
Sent from my Xperia Neo V using xda premium
I can get the phone to conect to the PC in flashmode. I downloaded the stock firmware of Neo MT15i (v 4.1.A.0.562) and flashed it, but no luck. The phone keeps stuck in the SONY screen. Any ideas?
EDIT: actually, when I bought the phone, it came with Android 2.3, I don't remember the firmware version.
IagoMalta said:
I can get the phone to conect to the PC in flashmode. I downloaded the stock firmware of Neo MT15i (v 4.1.A.0.562) and flashed it, but no luck. The phone keeps stuck in the SONY screen. Any ideas?
EDIT: actually, when I bought the phone, it came with Android 2.3, I don't remember the firmware version.
Click to expand...
Click to collapse
It doesn't matter which android version you flash all should work
make sure you checked those boxes in flashmode
Wipe data
Wipe cache
Wipe apps log
No final verification
And just to know when you flashed the firmware. Does it completed successfully?
Sent from my Xperia Neo V using xda premium
monobianco87 said:
It doesn't matter which android version you flash all should work
make sure you checked those boxes in flashmode
Wipe data
Wipe cache
Wipe apps log
No final verification
And just to know when you flashed the firmware. Does it completed successfully?
Sent from my Xperia Neo V using xda premium
Click to expand...
Click to collapse
Well, I got the phone to boot. I was just trying to flash an incomplete firmware, I guess. I downloaded a new firmware I found in a rooting tutorial thread in this forum and flashed it. The phone is now working fine.
But now it's not rooted anymore. Maybe in the future I'll try to root and flash a new rom.
Thanks for the help, anyway. :laugh:
Never mind, but I suggest you unlock your bootloader if you would like to flash custom Rom
Sent from my Xperia Neo V using xda premium
IagoMalta said:
Hello.
I have a similar problem, if not identical. I rooted my MT15i today hoping to install a custom ROM I found in this forum.
Everything went fine. I rooted the phone and installed Clockwork Mod Recovery properly.
Then, I downloaded the rom .zip, placed it in /sdcard, made a backup of my current system, wiped data/ full reset and installed the ROM with SUCCESS, as it said in the log.
After that, I rebooted the phone and now it keep stuck in the "SONY" boot screen and won't change no matter what I do.
But I think I know why did this happen. I was following a tutorial found in another site. There was listed only to wipe data and full reset, and not to wipe danvik and cache, as I came to read after I was stuck in the boot screen.
The problem is that now I can't even get to the Clockwork Mod Recovery screen, even if I start the phone holding volume down button (or reset, or any other button the phone might have).
The only thing to do is removing the battery. After starting again, it gets stuck again in SONY screen.
When I plug the phone into my PC, nothing happens. It doesn't get recognised.
It only turns on and stops at the SONY screen again.
I wonder if there's a way to access the Clockwork Mod Recovery menu or some way to return the phone to the stock settings.
Or is it a possible brick?
Thanks for the help already.
Ps.: sorry for the long post.
Click to expand...
Click to collapse
Flash a new kernel with cwm recovery using flashtool (by Doomlord). wipe cache, dalvic cache, syste, data, reset factory in cwm recovery.
install a new rom having SAME ANDROID VERSION as ur kernel.
thats it!! REBOOT!
NEO V doesn't boot
I have rooted my Xperia NEO V by installing a custom rom. Now my problem is
1. it is not booting. whenever I want to start it sony logo appears and doesn't go.
2. I tried to flash it but the device is not even recognised by PC
3 I tried to boot it into recovery mode but pressing power button and volume down button and releasing it, pressing power button and back button, and numerous methods, it didnt go beyond sony logo.
4. tried Dooms lord but it also didnt recognise the device. Kept on waiting for the device.
5 Everytime I have to take out the battery and then insert it as it is not being switched off from power button.
6. as soon as I connect it to charging the Sony Logo appears.
7. When I start it after putting the battery again, without connecting it to charging point, it vibrates on starts as it used to earlier, but then doesnt go beyond sony logo.
Is my phone bricked? Please help. Lots of thanks in advance to all the developers.
manojdang2003 said:
I have rooted my Xperia NEO V by installing a custom rom. Now my problem is
1. it is not booting. whenever I want to start it sony logo appears and doesn't go.
2. I tried to flash it but the device is not even recognised by PC
3 I tried to boot it into recovery mode but pressing power button and volume down button and releasing it, pressing power button and back button, and numerous methods, it didnt go beyond sony logo.
4. tried Dooms lord but it also didnt recognise the device. Kept on waiting for the device.
Is my phone bricked? Please help. Lots of thanks in advance to all the developers.
Click to expand...
Click to collapse
What rom were you trying to install? Is your bootloader unlocked? And you can try flashing stock firmware with flashtool to revive it...
Sent from my Xperia Neo V using xda app-developers app
NEO V doesn't boot
Hi,
I installed following in my Neo V MT11i
Super Jelly Bean v6.0(16th august 2013)
best kernel for sjb(fusion 5.4)
debloated updated gapps
using following link . http://forum.xda-developers.com/showthread.php?t=2108632
I am using Kernel_Flasher_v2.0 to flash the image kernel. It recognises the device and shows that the kernel is flashed. But the device doesnt reboot. I root the phone through eroot software. Then I install X parts and go into recovery mode.
I wiped the phone fully, including system format.
Please guide where I am missing some crucial step.
I am using windows 8
Thanks in advance
manojdang2003 said:
Hi,
I installed following in my Neo V MT11i
Super Jelly Bean v6.0(16th august 2013)
best kernel for sjb(fusion 5.4)
debloated updated gapps
using following link . http://forum.xda-developers.com/showthread.php?t=2108632
I am using Kernel_Flasher_v2.0 to flash the image kernel. It recognises the device and shows that the kernel is flashed. But the device doesnt reboot. I root the phone through eroot software. Then I install X parts and go into recovery mode.
I wiped the phone fully, including system format.
Please guide where I am missing some crucial step.
I am using windows 8
Thanks in advance
Click to expand...
Click to collapse
After flashing kernel go to recovery... From there flash rom... It doesn't boot because you flashed a jb kernel on a non jb rom... Flash kernel... Turn on keep pressing volume down button... It will go to recovery... Do wipes... Install zip...
Sent from my Xperia Neo V using xda app-developers app