Hi I have a problem with the Galaxy Ace.
I have root and all perfect.
This morning I picked up and when I was with I have been off, and when turned on does not take a second restart (sometimes leaving a thousandth of a second logo of Samsung), it starts loading the rom. No start.
I have removed the battery, msd, ..
Downloading so I can enter (I have thousands of flash ROM and is =) || According odin entirely correct, clarify that I have never flashed roms on this phone and do not know if the phone should see a progress bar as the galaxy 3 or something .. or just stay in Downloading ... (Yellow)
||
So I can enter Dload Emergency Mode (ARM9 Mode) | | do not know what is | |
I can enter RAMDUMP Mode (ARM9 mode) | | I do not know what it is | |
I can not enter the recovery to try to do a wipe.
I tried to flash rom with odin and many download mode, but nothing.
I can do something with the other modes do not know?
Rarely, two days after I have been looking and trying but nothing stays the same.
Thanks in advance, I hope some help!
I´m spanish, I used google translator
Really want to help, but cannot even understand a bit..
Sent from your phone
Which firmwares have you tried flashing?
nish7x said:
Which firmwares have you tried flashing?
Click to expand...
Click to collapse
Samfirmware :
S5830XWKAB
S5830_XXJLC
S5830_XWKAB
ModRom : VillainROM 1.0
All fails...
an0nym0us_ said:
Really want to help, but cannot even understand a bit..
Sent from your phone
Click to expand...
Click to collapse
Sorry.. I understand very little English
1.first go to recovery and whype your phone
2. take your battery off
3. press on/off button + home button + volume down button at the same time put your battery in
4. you shold get downlading mode
5. flash your ace with firmware whitch has 5 files also, not with one file..
than it should work again
Happened the same
It happened the same to me, but when i flashed with kph i noticed that i lost my imei number and i couldn do calls any more so i sent to service and they change the board, warranty covered the problem because it hadless than three months
Try with kph
Good luck!
Me paso lo mismo, lo flashie con el firmware kph y me di cuenta de que habia perdido el imei y ya no podia llamar asi que lo mande al servicio tecnico y ahi le cambiaron la placa y lo cubrio la garantia del aparato, tenia menos de tres meses
Intenta con kph
Buena suerte!
i had this problem yesterday. but now it works perfekt!
just look at Android Development how to unbrick your ace
http://forum.xda-developers.com/showthread.php?t=1071970
hackdima said:
1.first go to recovery and whype your phone
2. take your battery off
3. press on/off button + home button + volume down button at the same time put your battery in
4. you shold get downlading mode
5. flash your ace with firmware whitch has 5 files also, not with one file..
than it should work again
Click to expand...
Click to collapse
all roms have 4 files
apboot
Code
modem
CSC.
Where there is rom with 5 files?
thanks
hackdima said:
i had this problem yesterday. but now it works perfekt!
just look at Android Development how to unbrick your ace
http://forum.xda-developers.com/showthread.php?t=1071970
Click to expand...
Click to collapse
No works ...
Pallares3 said:
all roms have 4 files
apboot
Code
modem
CSC.
Where there is rom with 5 files?
thanks
Click to expand...
Click to collapse
whats about Cooper_v1.0.ops ?
hackdima said:
whats about Cooper_v1.0.ops ?
Click to expand...
Click to collapse
Omm yes, this is all ?
rom that you made to fix the brick?
Related
Hi, I tried to update my phone to v10n and everything went accordingly, but when I tried to reboot, my phone hangs on boot screen. Anyone can help?
Sent from my HTC Tattoo using XDA App
Had the same problem updating to 10n. See the other threads for a solution.
Basically, you need to download the 10c version (KDZ file) from LG. There is a thread about how to do this.
Then you need to download the KDZ application. Start the phone using the recovery mode keys. After that start KDZ app and point it to the kdz file you downloaded. Press the start button and wait.
See:
http://forum.xda-developers.com/showthread.php?t=875881
http://forum.xda-developers.com/showthread.php?t=883314
for reference
Nevermind, I resolved the issue pressing HOME + VOLUME DOWN + POWER. the phone booted normaly.
tu ai citit forumul inainte de a posta? s-a mai raspuns la intrebarile astea de cateva ori.
Did you read the forum before posting? Your questions has already been answered.
Scuze, abia mi-am luat telefonul si nu am explorat inca toate topicurile
Sorry, I just bought the phone and I didn't have time to explore all the topics
Sent from my HTC Tattoo using XDA App
alexmbt said:
tu ai citit forumul inainte de a posta? s-a mai raspuns la intrebarile astea de cateva ori.
Click to expand...
Click to collapse
cristi_bostan2005 said:
Scuze, abia mi-am luat telefonul si nu am explorat inca toate topicurile
Sent from my HTC Tattoo using XDA App
Click to expand...
Click to collapse
Please translate your posts to english.
That is the forum rule.
Cheers
Hello everyone,
I'm running CM-7.2 (2.3.7.) on my Samsung Galaxy Ace GT-S5830.
I use iLauncher, but when I'm on CM-7.2 I have a weird shadow bug in iLauncher.
>>img6.imageshack.us/img6/6798/screenshot1356643580439(dot)png
And when I'm running it on Android 4 I don't have it.
Anyone a solution for the bug?
Thanks in Advance
AShacks said:
Hello everyone,
I'm running CM-7.2 (2.3.7.) on my Samsung Galaxy Ace GT-S5830.
I use iLauncher, but when I'm on CM-7.2 I have a weird shadow bug in iLauncher.
>>img6.imageshack.us/img6/6798/screenshot1356643580439(dot)png
And when I'm running it on Android 4 I don't have it.
Anyone a solution for the bug?
Thanks in Advance
Click to expand...
Click to collapse
Hi AShacks!
I've read this in Gogle play: (translated from spanish) "if you just touch an icon and move it a little (not in edition mode) the shadows go darker. "
_original in spanish "2. Si tocas un icono y lo mueves ligeramente (no en el modo edicion), las sombras vuelven a aparecer siendo más oscuras."_
Sadly, I don´t know any solution.
Hmmm okay
BajoPrimate said:
Hi AShacks!
I've read this in Gogle play: (translated from spanish) "if you just touch an icon and move it a little (not in edition mode) the shadows go darker. "
_original in spanish "2. Si tocas un icono y lo mueves ligeramente (no en el modo edicion), las sombras vuelven a aparecer siendo más oscuras."_
Sadly, I don´t know any solution.
Click to expand...
Click to collapse
Hmm okay! It's running well on all stock roms but on cm 7 it has those weird circles.. thnx anyway!
burkepaul6 said:
This I the best I've been able to do.
Click to expand...
Click to collapse
What is it? ...
Please someone help me! XD
AShacks said:
Hmmm okay
Hmm okay! It's running well on all stock roms but on cm 7 it has those weird circles.. thnx anyway!
Click to expand...
Click to collapse
Hi AShacks!
That's what the thanks button is there for.
Is it the dpi or something?
PLS ROM BACKUP TIMMY M7 o LAUDE MARS M7.....
bricked Laude Mars 7
Hi to all.
I'm in need of the same ROM for my bricked Laude Mars 7. None of the website has this ROM... Please, help. If we can have a SP Flash version as the phone is dead. Thanks in advance.
enable original rom Backup timmy m7
Don_Isaak said:
PLS ROM BACKUP TIMMY M7 o LAUDE MARS M7.....
Click to expand...
Click to collapse
chkers for needrom timmy m7 :good:
chkers for needrom timmy m7
Dompta said:
Hi to all.
I'm in need of the same ROM for my bricked Laude Mars 7. None of the website has this ROM... Please, help. If we can have a SP Flash version as the phone is dead. Thanks in advance.
Click to expand...
Click to collapse
chkers for needrom timmy m7
I will check and get back to you. Thanks.
Hi,
I suceeded to flash the rom to my Laude Mars7. The phone turned on, I can access the recovery. After the hard reset, the touchscreen is not calibrated. No way to use the keyboard or the screen. So, the ROM is not compatible with the phone. I'm looking for the TWRP to be able to calibrate the screen. Also, It is asking about password at the boot.
Hello guys, me too im looking for this firmware, someone please make a backup! why is so diffuclt find it?! and on needrom or google i cant find it
Dompta said:
Hi,
I suceeded to flash the rom to my Laude Mars7. The phone turned on, I can access the recovery. After the hard reset, the touchscreen is not calibrated. No way to use the keyboard or the screen. So, the ROM is not compatible with the phone. I'm looking for the TWRP to be able to calibrate the screen. Also, It is asking about password at the boot.
Click to expand...
Click to collapse
Comparte la rom por favor
Rom timmy
Benz83 said:
Hello guys, me too im looking for this firmware, someone please make a backup! why is so diffuclt find it?! and on needrom or google i cant find it
Click to expand...
Click to collapse
Ya compre otro timmy m7 para sacar la rom y poder arreglar el otro timmy me llega el 12 de diciembre
lucas99 said:
chkers for needrom timmy m7
Click to expand...
Click to collapse
esa rom no es del timmy m7 es del thl 4400
Dompta said:
Hi,
I suceeded to flash the rom to my Laude Mars7. The phone turned on, I can access the recovery. After the hard reset, the touchscreen is not calibrated. No way to use the keyboard or the screen. So, the ROM is not compatible with the phone. I'm looking for the TWRP to be able to calibrate the screen. Also, It is asking about password at the boot.
Click to expand...
Click to collapse
porfavor comparte la rom que utlizaste
backup del timmy m7
les comparto mi backup del timmy m7 flasheable por sp flash tool.
link: http://www.speedyshare.com/uTWHF/TIMMY-M7-BACKUP-FLASH-SP.rar
English only people.
Don_Isaak said:
les comparto mi backup del timmy m7 flasheable por sp flash tool.
link: http://www.speedyshare.com/uTWHF/TIMMY-M7-BACKUP-FLASH-SP.rar
Click to expand...
Click to collapse
Hi, I downloaded your file and I found that cache.img and data.img are MISSING. Can you please backup also these two partition and re-upload?
Thank you
theButcher03 said:
Hi, I downloaded your file and I found that cache.img and data.img are MISSING. Can you please backup also these two partition and re-upload?
Thank you
Click to expand...
Click to collapse
El archivo esta completo tienes que usar el scartter de la subcarpeta llamada(! Files_to_flashtool)
Don_Isaak said:
El archivo esta completo tienes que usar el scartter de la subcarpeta llamada(! Files_to_flashtool)
Click to expand...
Click to collapse
There is neither cache.img nor data.img on "!Files_to_flashtool" folder. Also when you try to flash using that scatter.txt, the program says that one or more files are missing!
Also, have you managed to get your phone working?
theButcher03 said:
There is neither cache.img nor data.img on "!Files_to_flashtool" folder. Also when you try to flash using that scatter.txt, the program says that one or more files are missing!
Also, have you managed to get your phone working?
Click to expand...
Click to collapse
Ese es un backup total Dell timmy M7 lo pude flashear en otro timmy que estaba como ladrillo.... Lo siento amigo si en el tuyo no funciona. No te puedo ayudar ya no tengo este móvil.
NEED HELP
Hi all,
I ask you to apologize for my broken English .. I am French
There should be a forum user with an unblocked M7 Timmy creates a SCATTER and a ROM for help
He must also give us the ROM M7
Via SP FLASH TOOL is the only technique to unlock our phone
Thank you, hoping to find a solution quickly because I am disgusted
DemonS91 said:
Hi all,
I ask you to apologize for my broken English .. I am French
There should be a forum user with an unblocked M7 Timmy creates a SCATTER and a ROM for help
He must also give us the ROM M7
Via SP FLASH TOOL is the only technique to unlock our phone
Thank you, hoping to find a solution quickly because I am disgusted
Click to expand...
Click to collapse
If people are still in need of a copy of the rom I have a working nearly new Timmy M7. My only experience with this kind of stuff is trying some different roms on a tablet 3 or 4 years ago, so if it's still needed, could anyone recommend a walk-though of what I'd need to do?
Hi there. im having some hard trouble with my S3 I9300, i've tried to update my ROM, and when i did it... He's started to reboot by himself and try to enter to recovery mode... but it keep rebooting and... has it seems, te recovery mode it's kinda broken....
Please help... Anyone can tell me a guide to solve it ??... Thank you :·)
____
Spanish:
Hola, estoy teniendo problemas con mi Samsung S3 I9300, intente actualizar a una ROM Reciente, de cyanogenmod, y cuando lo hice, empezó a reiniciarse constantemente intentando ingresar por su propio medio en modo recovery, quisiera saber acerca de alguna guía de como solucionarlo .... si no es mucho pedir... por favor... ayudenme... Gracias...
Have you tried to go to download mode and try installing official stock firmware using Odin? Bootloop and recovery problems are usually corrected by installing the stock firmware.
I dont know even how to do it.... the time that i've roomed the device i recibed help from a friend.... there's any guide to do that ?, can you recommend me some?
[email protected][email protected] said:
Have you tried to go to download mode and try installing official stock firmware using Odin? Bootloop and recovery problems are usually corrected by installing the stock firmware.
Click to expand...
Click to collapse
NoFiixx said:
I dont know even how to do it.... the time that i've roomed the device i recibed help from a friend.... there's any guide to do that ?, can you recommend me some?
Click to expand...
Click to collapse
Dude, Don't Panic here's a guide, hope your device becomes fit again - http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
I will try, Thank you so much for the help.... if i solve that i will reply the message.... Sry for my english, it's not so good... xD
[email protected][email protected] said:
Have you tried to go to download mode and try installing official stock firmware using Odin? Bootloop and recovery problems are usually corrected by installing the stock firmware.
Click to expand...
Click to collapse
[email protected][email protected] said:
Dude, Don't Panic here's a guide, hope your device becomes fit again - http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Click to expand...
Click to collapse
NoFiixx said:
I will try, Thank you so much for the help.... if i solve that i will reply the message.... Sry for my english, it's not so good... xD
Click to expand...
Click to collapse
keep me posted
[email protected][email protected] said:
keep me posted
Click to expand...
Click to collapse
Hi !, i dont know how to say this without it sound really bad and extreme gay... but...
I Love you so much man!, It Worked!!!!!!!!!.....
Thank you for your patience...
I finally recovered my Mobile for work...
Thank you Thank you Thank you Thank you Thank you Thank you
NoFiixx said:
Hi !, i dont know how to say this without it sound really bad and extreme gay... but...
I Love you so much man!, It Worked!!!!!!!!!.....
Thank you for your patience...
I finally recovered my Mobile for work...
Thank you Thank you Thank you Thank you Thank you Thank you
Click to expand...
Click to collapse
Congrats mate , all the best ^5
So unlike everyone on the internet, I decide upon myself to be that one person to bring forth the firmware files, and method to root the device successful.
Everything in my GitHub, files and instructions: https://github.com/dafish7/Sunmi-v2-Firmware-
If anyone has any questions or suggestions, feel free to add to this thread!
Thank you. I have a Sunmi T2 device. Could you guide me how to root it ?
Look I wish I could, but since it's a qualcomm chipset instead of a mediatek one, uses a different program and requirements. But the Sunmi T2 does have a debug port, and Qualcomm devices can get their firmware ripped off, so it is possible, just that I don't have a T2 to do it and explain the process. Here's a link to how pull the firmware off the T2: https://www.hovatek.com/forum/thread-31475.html
You can use the same program to install/flash the firmware files, so once you have managed to rip the firmware for, and have it extracted in a way that the program can read it you'll be set. I believe the magisk method of rooting should still work, just flash the patched boot.img in with the rest of the firmware files and voila should be rooted
Good luck!
Sent by my rooted Lenovo tab m8
Dafish73113 said:
Entonces, a diferencia de todos en Internet, decido ser la única persona que presente los archivos de firmware y el método para rootear el dispositivo con éxito.
Todo en mi GitHub, archivos e instrucciones: https://github.com/dafish7/Sunmi-v2-Firmware-
Si alguien tiene alguna pregunta o sugerencia, ¡no dude en agregarla a este
Click to expand...
Click to collapse
Me da error al instalar, tengo un sunmiv2 formateado de flash y no termina la instalación
Well, first what error pops up? I'm going to assume that you've done something wrong because it's worked on all 4 of my sunmi v2. Please post a screenshot of the error and a screenshot of SP flash tool before you press the download arrow
Dafish73113 said:
So unlike everyone on the internet, I decide upon myself to be that one person to bring forth the firmware files, and method to root the device successful.
Everything in my GitHub, files and instructions: https://github.com/dafish7/Sunmi-v2-Firmware-
If anyone has any questions or suggestions, feel free to add to this thread!
Click to expand...
Click to collapse
Hi Will this work on Sunmi v2 Pro? Big Thanks !
xerth said:
Hi Will this work on Sunmi v2 Pro? Big Thanks !
Click to expand...
Click to collapse
Unfortunately I don't think so because of the different hardware and according to the internet, v2 pro has a different chipset (Qualcomm, normal v2 has mediatek chipsets) SP flash tool and my firmware files only work for v2, mediatek only.
But as I said in one of my above posts in this thread, it has a like for ripping off firmware from Qualcomm devices. Good luck!
UPDATE!!
introducing Unoffical TWRP for Sunmi V2 devices (ONLY)!!
Download link: https://github.com/dafish7/Sunmi-v2-Firmware-
Dafish73113 said:
So unlike everyone on the internet, I decide upon myself to be that one person to bring forth the firmware files, and method to root the device successful.
Everything in my GitHub, files and instructions: https://github.com/dafish7/Sunmi-v2-Firmware-
If anyone has any questions or suggestions, feel free to add to this thread!
Click to expand...
Click to collapse
have a tutorial for unlocking sunmi v2
andra83 said:
have a tutorial for unlocking sunmi v2
Click to expand...
Click to collapse
All in my GitHub: https://github.com/dafish7/Sunmi-v2-Firmware-
Dafish73113 said:
All in my GitHub: https://github.com/dafish7/Sunmi-v2-Firmware-
Click to expand...
Click to collapse
is there a youtube video tutorial?
I'm a beginner, I don't understand.
Do you know if this can work on sunmi v2s?
gish94 said:
Do you know if this can work on sunmi v2s?
Click to expand...
Click to collapse
If it is V2, then yes. V2 Pro, no
This is what happened for me: at 96% of [userdata] Download Flash - ERROR: STATUS_MMC_ERR (0xC0040030).
Yeah one of my 4 devices has that error all the time, and a dew people in my discord also are getting that error so fixing that is currently my goal, its really sucky because mine is next to brand new so the emmc chip isnt actually failing, and that considering all of us are also failing towards the end of the userdata download, after the entire process is taking FAR longer than normal as well (tested against my three working ones)
Hello now that's not the right place but I'm desperate I need the firmware of pos p716qc-v5.1! q2i models
Hello! I have followed all the flashing steps, but when turning the device off and on, it does not start.
I have flashed by modifying the boot without magisk and with magisk, but the result is the same
chuschulito said:
Hello! I have followed all the flashing steps, but when turning the device off and on, it does not start.
I have flashed by modifying the boot without magisk and with magisk, but the result is the same
Click to expand...
Click to collapse
Is it a V2 device? Does the battery icon show then you put it on charge when it's off?
Dafish73113 said:
Is it a V2 device? Does the battery icon show then you put it on charge when it's off?
Click to expand...
Click to collapse
yes, it is the normal v2.
The flashing is done correctly with sp flashtool, it starts, I configure it, but if I turn it off or restart, the system does not boot, the logo of an orange flower remains stopped. If I go into recovery, it tells me that there is no system installed.
chuschulito said:
yes, it is the normal v2.
The flashing is done correctly with sp flashtool, it starts, I configure it, but if I turn it off or restart, the system does not boot, the logo of an orange flower remains stopped. If I go into recovery, it tells me that there is no system installed.
Click to expand...
Click to collapse
Did you by any chance encounter an emmc error during flashing/and or a really really long flashing process time (more than 2 minutes total?)