Related
so after finding out there is not an otterbox case for the g1 (booooo!) I have started to think that it would be great to find another styled case that is snug fit for the g1. That got me to realizing the lack of snugness in most g1 cases is from the keyboard and having to flip out the screen. I got my g1 off of ebay and it came with one of those little thin plastic cases and a little plastic case i slip the g1 into. Also the keyboard flipping out is the only flimsy part of the phone and I like my phones to have a solid build. THus...
does anyone use any cases have a very snug fit (like otterbox) but that does not allow the keyboard to flip out. I have begun to like the on screen keyboard especially after using it in landscape mode. Perhaps I can go without hte keyboard and then when needed, take off the case and be like 'ha! take that trendy iPhone user!!'..
so any cases that will enclose the g1 leaving the trackpad and buttons and screen exposed???? I guess the cases do not have to be made for the g1 but should be tested and fit snugly (did i mention i like a snug fit?)
cheers
austriker27 said:
so after finding out there is not an otterbox case for the g1 (booooo!) I have started to think that it would be great to find another styled case that is snug fit for the g1. That got me to realizing the lack of snugness in most g1 cases is from the keyboard and having to flip out the screen. I got my g1 off of ebay and it came with one of those little thin plastic cases and a little plastic case i slip the g1 into. Also the keyboard flipping out is the only flimsy part of the phone and I like my phones to have a solid build. THus...
does anyone use any cases have a very snug fit (like otterbox) but that does not allow the keyboard to flip out. I have begun to like the on screen keyboard especially after using it in landscape mode. Perhaps I can go without hte keyboard and then when needed, take off the case and be like 'ha! take that trendy iPhone user!!'..
so any cases that will enclose the g1 leaving the trackpad and buttons and screen exposed???? I guess the cases do not have to be made for the g1 but should be tested and fit snugly (did i mention i like a snug fit?)
cheers
Click to expand...
Click to collapse
Modify your own case....that's the only option. The G1 has a terrible design, Ill admit it. The cases that were released for this device were awful....believe me I owned six of them and guess what I use now...No case...just the stock pouch that I thought was "Dorky" when I got it.
I keep it in the pouch so that way the phone doesn't get messed up in my pocket...and when I want to use the phone I pull it out of the pouch and wala.
Not to mention that I really like the feel of the G1 with no case on it in my hand.
For the record though, the best case I ever owned was the Body Glove. Problem is that it starts to fall apart after awhile (like most things).
It fits very snug though, and I know thats a priority for you.
I use a silicone case which fits around the back and the chin. For the screen, I just use one of the plastic pieces from one of the harder cases. Seems to work without adding too much bulk.
do you guys have links to your cases??
still looking for a rocking otterbox style case for my g1..
is there any phone that has the same or close dimensions that an otterbox would fit on a g1?????
CaseLogic makes a nice, sturdy, magnetic-closure, horizontal leather belt-style case that fits the G1.
old_dude said:
CaseLogic makes a nice, sturdy, magnetic-closure, horizontal leather belt-style case that fits the G1.
Click to expand...
Click to collapse
oh sweet! Do you have a link to it? I have searched for a caselogic g1 case but cannot find one..
The pouch for the Nexus One fits very snug around the G1. You could try and con HTC outa one or see what a replacement costs.
Gekx said:
The pouch for the Nexus One fits very snug around the G1. You could try and con HTC outa one or see what a replacement costs.
Click to expand...
Click to collapse
oh cool, what did the second part of your sentence mean??
Also do you HAVE A LINK???
I just recently got my 3vo and i need a case for it, never been a big fan of the otterboxes (just seem too bulky). I need a case that looks good and gives some protection.. i have a 2 year old that loves to play with my phone.. But im not sure what to get.. I dont work in construction or take my phone on any extreme sports, but i do forget my phone on my lap in the car all the time and go to get out and boom it hits the ground.. so i do need some protection..
So far this is the one im likeing
http://www.seidioonline.com/product-p/csk3hev3d-wh.htm
If you have a Best Buy near you, you can go there an try on some cases. They carry the one you posted too.
I had that case for my Evo 4G and I liked it a lot. Very nice case. The ones at Best Buy are named Pt, but they are made ny Seidio for Best Buy. Same exact case, just a different name stamped on it.
Sent from my PG86100 using XDA Premium App
The casemate tough case is pretty nice. It's not super big like the defender but its not slim either. But it looks nice, fits great and protects well. I got mine off ebay for about 22 bucks new. Well worth it. I also have the seidio active but prefer the tough case and haven't taken it off for the last 2 weeks or so except to clean it.
Sent from my PG86100 using XDA App
I'm still waiting for the Ballistic Case for the Evo 3D to make its appearance on their website; waiting on the HC version.
The CaseMate's look pretty good as well. I've seen good reviews for the Tough Case that they make.
However, SLM is correct. Go try out the Platinum cases at Best Buy before you take the plunge with the Seidio case. It costs $34.99 at Best Buy for the same Seidio one you're interested in.
I'll tell you from experience that I have the Platinum case (a.k.a. a rebranded version of the Seido Active case), and it's pretty sweet! Rumor has it that Best Buy will also be getting the Seidio 1900 mAh batteries as well, but they'll too be rebranded as Platinum. The case I got is excellent and slimmer than the Otterbox cases. It comes in two pieces. You have a silicone sleeve with a felt-like interior that wraps around the phone, and then you have a strong plastic skeleton that wraps around the sleeve. Although the case is great, there are a few things that I don't like about it. For one, if you keep your phone in your pocket like me, you'll start to notice pocket lint collect around the edges of the case. Also, it's sometimes hard to press buttons around the edges of the phone. For example, I use Swype, and when I have to manually type in a word instead of swiping, it can be difficult pressing letters such as P or A. I'll accidentally hit the O or S keys. But it does offer damn good protection. I've gotten so accustomed to the case that it's just weird to hold the phone without it. The case also protects the dual cameras in the back. I have no clue why HTC decided to have the cameras stick out, but this case offers protection for them. As far as my pocket lint issue goes, I think I might invest in a holster for the phone. I'm not sure if Best Buy sells the Platinum branded holster that is compatible with the Active case, but I'll look sometime this week and let you know. I use my phone as my primary music player, whether it's mp3s stored on the phone, FM radio, or Internet radio, and I think that having it on my hip instead of my pocket will be a little bit more convenient for me.
As far as cases go, I've only seen the Platinum case with the black skeleton being sold at Best Buy. Seido sells their Active case with different colored skeletons, but the sleeve still remains black. I'm kinda disappointed Best Buy didn't sell the burgundy skeleton. I think it would've looked nice on this phone (I'm a fan of dark red colors.). If you want something more rugged, Seido sells on their website the Surface case (a hard two piece plastic shell available with or without a kickstand) and the Convert case. If you plan on drunkenly abusing your phone or chunking your phone at the wall after a pissed off conversation, I recommend the Convert case. It's like a combination of the Active and Surface cases. The inner layer is the Surface case, and then it's wrapped with a silicone sleeve and skeleton like the Active case. It also has a detachable cover for the rear cameras. To top it all off, the Convert case comes with a precision-cut screen guard. I don't really need all that thickness and protection, but I would put money down that the Convert case holds up to its name. If you plan on getting an extended battery though, make sure you get an extended case since the regular cases won't fit with the extended battery door.
Anyway, I hope this helps. Good luck shopping for the right case!
I bought a silicon case with the wave. Protects camera, wich had to be protected since it sticks out. Also protects the other buttons and seems to fit well...
Its only 1,50 dollar so thats not a bad deal.
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Only one downside, almost every 3vo owner has it
Red Body Glove case
I have the Body Glove case in red, and I like it a lot. It is a nice looking case.
I have no issues with mine unlike some others, but check out the pictures here:
http://forum.xda-developers.com/showthread.php?t=1141005
The available colors are Red, Blue, Gray, Silver, and maybe White too.
Thank for the info guys im going to head to beat buy today and check it out..
butterbuns said:
Thank for the info guys im going to head to beat buy today and check it out..
Click to expand...
Click to collapse
Sounds good, let us know what you decide. Bhambalek said they only have the black skeleton shell at his Best Buy. My local Best Buy only had them in white. Maybe yours will have both so you'll have options. Good luck!
Sent from my PG86100 using XDA Premium App
Just unpacked and put on my Seidio Active with holster, got the saphire blue from Versio Mobile on Amazon, 34.49 shipped.
Very nice case, fits very snug, like the inner skin and outer skeleton, holster is very solid. Only complaint, that the camera glass is not protected; probably order a carbon skin so I can throw some protection on that glass. Had a TPU on her since day one and glad I upgraded to this one.
Delano.888 said:
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Click to expand...
Click to collapse
I also like and recommend the TPU Skin Cover Phone Case for HTC Evo 3D http://www.amazon.com/TPU-Cases-Flexible-Sprint-Retail-Packaging/dp/B0053NWDO0
I have the Sedio Surface case and am happy with it. Decent protection and it has a kickstand also.
I posted a review on sprintusers, but dont know the policy here about linking to other forums.
i picked up the PT Cruiser case yesterday, i was able to get the black and white one that i liked.. Now i first off the bat i really like the look and feel of the case, but i dont like how the phone fits in the rubber sleeve, its not a real snug fit. So i can see pocket lint and other things easily able to get inbetween the phone and the rubber side, but other then that i like it so far.. Its still a lil early to make a final decision on the case..
But again thanks for everyones responces, i have to say this site really does rock!!
one word: otterbox defender. Ok so that was 2 words.
I have four requirements:
(1) Decent protection all around except for screen.
(2) Protection for the camera.
(3) Must lie flat and not wobble when typing w/phone on table.
(4) Must not make the phone significantly fatter (otterbox is OUT).
Anyone have any suggestions? I actually like the gel case from Sprint but it doesn't protect the camera.
Mike
i like seidio case the best
i've tried all sorts of cases and I keep coming back to my casemate tough case, can't go wrong with that one. It's not that bulky and offers just the right amount of protection without having your phone inside a vault like the defender.
Seidio Active or Platinum Cruiser. I had the Seidio on my Evo 4G for a year. Get the holster from Seidio to prevent the lint issue and clip it inside of your pocket. Something that nobody mentioned is that the rubber bezel allows you to set the phone face down without the screen contacting. That also makes it slip resistant and prevents an unattended ringing phone from vibrating off of the desk. Not too much bulk either.
Sent from my 3vo using XDA Premium App
My Atrix has become a scratch magnet so i need to get a good case and I cant decide which one to get
so which case should i get?
I need a case that will completely protect my phone from scratches and falls, yet also allow me to use a dock, and not be to heavy at the same time
so far these are the ones that i think will work just need anyone's advice as to which one to get...
http://www.amazon.com/Black-Hybrid-...30E8/ref=sr_1_3?ie=UTF8&qid=1317828950&sr=8-3
http://www.ebay.com/itm/OTTERBOX-IM...ccessories&hash=item1c1e676cf5#ht_1524wt_1139
http://www.ebay.com/itm/5-Accessory...ccessories&hash=item2eb819cfb9#ht_3190wt_1139
If anyone knows of a better case to get could you please post a link...preferably to ebay or amazon
Thank you to anyone who is willing to help
I got this one at Radio Shack and so far I like it. Seems to give the phone a little protection and does not add too much to the phone. It was only about $9.00.
Incipio MT-106 Feather Case for Motorola Atrix 4G - Matte Black
I have the speck case. Very durable and even dropped my phone from about five feet high landing on the corner of the case on the edge of my metal bedframe. The case has a little dent where that happened but nothing happened to the phone. Doesnt fit very well in the dock but is extremely easy to take on and off.
you should think about getting a new back cover (i believe they come in green or blue) and then just putting a high quality screen protector on your phone. the scratch issue is gone, the phone still fits in the dock, and the screen is decently protected.
this may help:
http://www.ebay.com/itm/Back-Batter...main_0&var=&hash=item6d703bcec9#ht_6493wt_850
I would recommend the Seidio Active case from www.seidioonline.com if you dont like bulk but want decent protection. I own that case in Sapphire Blue and love it. I'm currently using my Ballistic HC series case, which is the BEST protection you can possibly get for the Atrix. Beats the otterbox defender hands down.
http://www.amazon.com/Seidio-CSK3MT..._1_6?s=wireless&ie=UTF8&qid=1317856016&sr=1-6
here's the active case
it looks pretty cool i just ordered mine!
i'm probably going to order me a case from Trident, this one looks so cool!
http://tridentcase.com/product_62_81.html
#1for trident or a cheep alturative is a bodyglove for less than 20$
Sent from my MB860 using xda premium
I USE THIS ONE ALL BLACK http://www.amazon.com/Black-Hybrid-R...7828950&sr=8-3
I'm definitely gonna buy a new back cover - http://cnn.cn/shop/motorola-mb860-atrix-blue-silicone-case-p-11666.html and most probably also the seido case - http://www.amazon.com/Seidio-CSK3MT..._1_5?s=wireless&ie=UTF8&qid=1317897936&sr=1-5
just a couple of more questions:
Will the seido case work with the docking station?
Which screen protector should i get as well?
Personally I just bought an oem battery door from ebay and it fits perfect, with less creaking than my old one. Plus I purchased a tpu case from ebay also, I always go with these tpu cases as they are lightweight and protect from major falls. Dropped my inc-s which had one from about 4 feet onto concrete and not a single mark was left on the phone. Hope this helps.
Sorry if I sounds like an idiot, kinda new to posting
I still prefer the old flip leather case I used with my HTCs with windows mobile. Good times...
e07015 said:
I got this one at Radio Shack and so far I like it. Seems to give the phone a little protection and does not add too much to the phone. It was only about $9.00.
Incipio MT-106 Feather Case for Motorola Atrix 4G - Matte Black
Click to expand...
Click to collapse
To be honest, I love the aesthetics of this case; however, I dislike it very much right now.
I recently dropped my phone as I was getting out of my car. It's not a high car. I saw the phone hit the ground, the case flew off, and then my phone hit the ground again.
Now, my once pristine phone has deep scratches on all 4 corners.
Sad times.
Sent from my MB860 using XDA App
New dilemma
Ok now after all of my case searching these are the two choices that i have:
An Incipio Feather Case and Zagg Screen Protector
or
An Incipio SILICRYLIC-Hard-Shell-Case-with-Silicone-Core
Which one should i get now?
btw i couldnt get what i said i was getting before cause they do not deliver to Pakistan but Incipio and Zagg do from their official websites
get the Otterbox Commuter
Dont really like the Otterbox commuter...what about the two cases that i stated before? Which one of those should i get?
Pwersonally, I would go for the 'Clear Protector' instead of Zagg... I have tried both and found the 'clear' a smarter fit.
As for the cover, it is up to you. Trial and erorr no doubt. I have the mesh cover which fits well (http://www.ebay.co.uk/itm/new-Hard-..._MobilePhonesCasesPouches&hash=item53e8938ff1) and provides protection.
I prefer Martin Fields than Zagg. They seem comparable in protection but Martin Fields has no orange peel yet has anti glare and also A LOT easier to 'install' on your phone.
I just got my atrix but i dont like the plastic cover. I had desire to this point and i am looking for a case which has that kind of feel like desire.
I would really appreciate any help
Looking for a case I can put my Flyer in WITH HTC hard back case AND stylus. Is there any case like this?
andif said:
Looking for a case I can put my Flyer in WITH HTC hard back case AND stylus. Is there any case like this?
Click to expand...
Click to collapse
I got one just like this on eBay for $7.00, I love it.
HTC Flyer 360° Rotating Stand Leather Cover Case With Stand - BLACK
No. I´ve meant the hard back case from HTC
triscuit1983 said:
I got one just like this on eBay for $7.00, I love it.
HTC Flyer 360° Rotating Stand Leather Cover Case With Stand - BLACK
Click to expand...
Click to collapse
I also use this 360 deg case, very practical and good one.
andif said:
No. I´ve meant the hard back case from HTC
Click to expand...
Click to collapse
The back is hard plastic, leather wrapped.
Unless your saying you already have the HTC case and you need something to go over it. If that's the case, I'd say probably not since most everything is made to fit the device by itself.
It´s the leather wrapped plastic case. At the moment I am using it together with the original white leather case. It´s a little bit tight-fitting but it works.
By the way, pay a little attention to Flyer cases who fits too tight;
1. They may cause stains especially at the top and bottom parts (rubbing with some diluted IPA or cologne water will do the trick)
2. I've also faced an interesting problem. The cases that fully cover the tablet makes the G-sensor not work. Like in the pic.
Therefore it seems, one has to use cases that hold or cover the tablet from the edges.
Is it real leather ? How does it feel ?
This guy has the rotating one for $7.99 shipped and he's i n the USA. It just has a slight imprint of the rotating side on it from back packing from China. You won't find it anywhere else under $12 now let alone from a US seller. My luck, the guy went on vaca before shipping mine out. Quite peeved. Would've spent a few dollars more and gotten something from Amazon with Prime like this one.. Great case. Have the same one for the Transformer and Icona A500.
I bought the $7.99 rotating case and its great. It actually has a hard shell mount with a leather (synthetic I presume) covering.... great looking ,great function, great price.
dbpaddler said:
This guy has the rotating one for $7.99 shipped and he's i n the USA.
Click to expand...
Click to collapse
That's exactly the one I got, and there was absolutely no imprint or defect of any kind. Good deal.
triscuit1983 said:
That's exactly the one I got, and there was absolutely no imprint or defect of any kind. Good deal.
Click to expand...
Click to collapse
Same experience here.
Hi,
After months of putting it off (whilst discovering more and more cases coming onto the market all the time) I went for this:
http://www.amazon.co.uk/StilGut-Ult...5QZ2/ref=sr_1_1?ie=UTF8&qid=1321807531&sr=8-1
At £34.90 not cheap but:
*I wanted the corners protecting, rather than all the edges and not the corners like it seems many flyer cases have...
*wanted a pen holder that protected the nib a little better (but now I can see it doesn't actually fully protect the nib)
*Superb build quality, lovely leather smell!
*Very simple design.
*The screen is completely unhindered, which I also thought was a plus compared to some designs where the case can encroach on the touchscreen.
Sent from my HTC Flyer P512 using xda premium
Looks like I got a more expensive, but identical product to this:
http://www.dinodirect.com/cases-cover-leather-waterproof-htc-flyer.html?cur=USD&AFFID=11&DinoDirect
Always the case... (sorry, no pun intended)
Sent from my HTC Flyer P512 using xda premium
Ian Rothwell said:
Hi,
After months of putting it off (whilst discovering more and more cases coming onto the market all the time) I went for this:
http://www.amazon.co.uk/StilGut-Ult...5QZ2/ref=sr_1_1?ie=UTF8&qid=1321807531&sr=8-1
At £34.90 not cheap but:
*I wanted the corners protecting, rather than all the edges and not the corners like it seems many flyer cases have...
*wanted a pen holder that protected the nib a little better (but now I can see it doesn't actually fully protect the nib)
*Superb build quality, lovely leather smell!
*Very simple design.
*The screen is completely unhindered, which I also thought was a plus compared to some designs where the case can encroach on the touchscreen.
Sent from my HTC Flyer P512 using xda premium
Click to expand...
Click to collapse
When the front flap is closed is it a very tight fit against the the Flyer's screen?
I ask this because I have exactly the same case but the outside is in a imitation carbon fibre material & it is very tight fitting so much so that the flap would put too much pressure on the screen & I'm afraid in the long term it will cause damage.
zen123 said:
When the front flap is closed is it a very tight fit against the the Flyer's screen?
I ask this because I have exactly the same case but the outside is in a imitation carbon fibre material & it is very tight fitting so much so that the flap would put too much pressure on the screen & I'm afraid in the long term it will cause damage.
Click to expand...
Click to collapse
This one I bought is yummy leather with a spongy cushion feel... The fit is tight but just kind of catches the curved side of the body, firm, but not too firm IMO... I don't expect it to damage the screen or even the body at all.
Sent from my HTC Flyer P512 using xda premium
That's a nice design. Does it seem to continue to rotate well with regular use?
How about this hard case?
Hi,
XDA wouldn't let me post the url so please search google "flyer skin case" and the first post from amazon is the one I'm talking about.
Anyone tried this? I'm debating between the 360 which I think is very handy to have and a case which is less bulky and can fit in my pockets. Yes, I can fit the flyer in my pockets .
Thanks!
My case came in today, the supposedly dented one from ebay had not dent at all. Going to look good on my flyer once it comes in
tripleteamed said:
Hi,
XDA wouldn't let me post the url so please search google "flyer skin case" and the first post from amazon is the one I'm talking about.
Anyone tried this? I'm debating between the 360 which I think is very handy to have and a case which is less bulky and can fit in my pockets. Yes, I can fit the flyer in my pockets .
Thanks!
Click to expand...
Click to collapse
I have the one your talking about and its not bad. I also have this one and like it much more:http://www.amazon.com/EMPIRE-Black-...77ZG/ref=sr_1_2?ie=UTF8&qid=1322813150&sr=8-2
Its hard rubber as the one your talking about is flexible rubber, they both have the same feeling. It also has a face plate that secures the case on tight. Its on Prime so free 2 day ship.
Im waiting for the otterbox case to come in the mail. From the 100 or so cases I looked at it seemed to be the best.
Hi there,
Im looking for thin case.
Best I have found is this case on ebay
Design is not bad, but its not covering glass area around the camera.
Questions:
1. Is there any thin case(plastic, rubber) that covers that?
2. Anyone tried skins? Will they remove easily(considering phone is jeans pocket)?
3. Those who are using various rubber, gel, hybrid and so on cases, how much fatter is your phone with them? If its not that much fatter suggestions on good cases then
stifler05 said:
Hi there,
Im looking for thin case.
Best I have found is this case on ebay
Design is not bad, but its not covering glass area around the camera.
Questions:
1. Is there any thin case(plastic, rubber) that covers that?
2. Anyone tried skins? Will they remove easily(considering phone is jeans pocket)?
3. Those who are using various rubber, gel, hybrid and so on cases, how much fatter is your phone with them? If its not that much fatter suggestions on good cases then
Click to expand...
Click to collapse
Try looking into the otterbox defender, or ballistic hc.
b1gsby_02 said:
Try looking into the otterbox defender, or ballistic hc.
Click to expand...
Click to collapse
Thanks mate
I found this one, and I´ll go with that one probably
I have tried them all, best case is either the capdase brand or official HTC TPU case. They both let your phone slide into your pocket easy, don't bulk out your phone, look great and offer good protection.
The Ebay jobs are just cheap rubbish you get fed up with after a week or 2.
Sent from my HTC EVO 3D X515a using XDA
vervester said:
I have tried them all, best case is either the capdase brand or official HTC TPU case.
Click to expand...
Click to collapse
Any link for official HTC TPU case where I can find it
Look up the Kraken AMS. That is a reasonable case.
Alternatively just look for something like this: http://www.ebay.co.uk/itm/BLACK-HAR...sesPouches&hash=item3a6a2fac16#ht_1887wt_1396
Best thing about this type of case is it doesn't add too much bulk, and is easy to get in and out of your pocket (unlike a silicone/rubber case). And it will actually protect your phone in a drop unlike that case you linked to in your original post. As for your screen... only BIG cases include a plastic layer to completely cover the glass.
Are you just looking for something with raised edges, and then use a screen protector perhaps? (Like the ebay one I showed you).
http://www.amazon.com/Acase-Superle...1HVI/ref=sr_1_9?ie=UTF8&qid=1333169597&sr=8-9
this has been the best case for me so far, its very thin, and has a rubber skin with a hard plastic shell..the kraken, and defender are way to big for me. this case is just the right size its about the same size as a tpu case.
stifler05 said:
Any link for official HTC TPU case where I can find it
Click to expand...
Click to collapse
HTC EVO 3D TPU Case TP C630
Loads available in the UK not so sure about else where. Ebay perhaps, Amazon etc.
Well worth the extra few pounds.
Sent from my HTC EVO 3D X515a using XDA
@Scougar- that case looks good. Nit expensive, will order and try it
@jtgarza3- I know about Acase but the problem is I can't get it in my country(amazon ships books and kindle only) and I cant find it elsewhere. I believe it is the best case
@vervester- thanks mate, will try it
Still can't find a case I like better than the acase superleggra.... Look into that, wonder if there's anywhere you buy it that will ship it to you. its cheap and sounds like what your looking for.
Sent from my PG86100 using xda premium
stifler05 said:
Thanks mate
I found this one, and I´ll go with that one probably
Click to expand...
Click to collapse
My case looks exactly the same and it was £3 from amazon.
IMO the thinnest cases are the back cases ones that doesnt really cover the top and bottom bezel...just the sides and back. BUT if you really want to protect your phone and not get it scratched up over time, you are better off using a TPU type case as the are not too thick and are of softer material and will not rub off any of the black anodized paint. Unlike any hard cases, whether its back only or 2 pieces. Also TPU cases are more absorbent during accidental drop on hard surfaces.
I was running seidio 2pc case hard case w/kick stand with my first 3d and although it had felt inside it eventually rubbed off the pain on the top corners of my phone. The felt inside was very thin and the case is not skin tight so it would move some and the slight movement of the case over time eventually sandpapered some of the paint off. TPU or rubber type cases are more skin tight and is not as abrasive as plastic on painted metal and will not damage the paint so long as you also clean it off from time to time. Some dirt can eventually get in between and the dirt will act as sandpaper. So just consider this when you're buying a case as some of you would probably like to sell your phone later down the road or just want to keep it looking new for a long time.
Finally found ultra thin(slim) case
Whole line is here
http://www.obostore.com/index.php?m..._description=1&categories_id=144&keyword=case
stifler05 said:
Finally found ultra thin(slim) case
Whole line is here
http://www.obostore.com/index.php?m..._description=1&categories_id=144&keyword=case
Click to expand...
Click to collapse
Those thin cases are the exact same thing as the case mate barely there cases. Much cheaper. I got the rock brand and like it a lot. You do lose that boot of protection at top and bottom though.
Some people have complained that these type of cases are a bit loose on the sides. Easy fix is to lightly squeeze the sides inwards... tight fit!
Sent from my Transformer Prime TF201 using xda premium
mozman said:
Those thin cases are the exact same thing as the case mate barely there cases. Much cheaper. I got the rock brand and like it a lot. You do lose that boot of protection at top and bottom though.
Some people have complained that these type of cases are a bit loose on the sides. Easy fix is to lightly squeeze the sides inwards... tight fit!
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
I went tpu so far like how smooth and not bulky it is lol Ditched the kraken and ballistic
Sent from the Reaper
reaper24 said:
I went tpu so far like how smooth and not bulky it is lol Ditched the kraken and ballistic
Sent from the Reaper
Click to expand...
Click to collapse
TPU cases are awesome and super sturdy.
vanessaem said:
TPU cases are awesome and super sturdy.
Click to expand...
Click to collapse
I agree went with a blue one those cheap screen protectors work well if you can put it on without dust .
Sent from the Reaper
yeah but the Evo gets hot sometimes and having those extra layers , scared would mess the phone up because of heat.
tonedinh said:
yeah but the Evo gets hot sometimes and having those extra layers , scared would mess the phone up because of heat.
Click to expand...
Click to collapse
What case you talkin about? Haven't had any heat issues?
gtnote said:
Very thin Case made with TPU and PC comes with a screen protector and about $12 using 10% off coupon code xda,
http://www.kevikev.com/Yoobao-TPU-Silicone-Case-for-Sprint-HTC-EVO-3D-TPUHTCEVO3D.htm
View attachment 1024718
View attachment 1024720
View attachment 1024721
Click to expand...
Click to collapse
I got mine. The case even covers the camera also come with a screen protector which works well if you put it on str8 with no dust.. Tho the one you posted looks like it's for a extended battery.
Cost only 4 dollars 3 shipped