[Q] Cognition & Kies - MTP Mode? - Galaxy S II Q&A, Help & Troubleshooting

Hello all.
Just flushed my ROM to Cognition 1.11.
For some reason I can't connect with kies, and when I try to connect with new PC Studio it tells me I'm in media player (MTP) mode. also, On my phone in the notification area it says "MTP Connected" instead of the usual kies-sync screen...
Please help with this!
Thanks,
Ariel

The trick that worked for me is:
connect using mass storage (in settings- usb)
disconnect mass storage
then connect using normal kies methode.
Check if usb debugging is off in aplications - development

Coolcat79 said:
The trick that worked for me is:
connect using mass storage (in settings- usb)
disconnect mass storage
then connect using normal kies methode.
Check if usb debugging is off in aplications - development
Click to expand...
Click to collapse
unfortunately still not working for me.
http://forum.xda-developers.com/showthread.php?t=1171643

Related

[Q] Mass storage?

Hey guys.
Does having this checked stop apps from automatically installing to SD like some do?
I ask this as i would like to have it ticked all the time to stop having to go into the settings and enabling mass storage.
any info would be sweet.
Cheers!
If you check Mass Storage Only in Settings/SD card & phone storage settings, it will automatically connect your phone in Mass Storage mode when you plug it via usb on your pc. That does not affect the way the SD is handled by the phone when not connected to the pc, so apps can install normally.
So you can tick it and don't worry about that when not connected to pc.
You may want to uncheck that when trying to connect via adb though, or when upgrading firmware via pc.
Cheers!
just what i needed to know
It doesn't affect the installation of apps it just puts your phone in mass storage mode directly when you connect it to your pc.
You also don't have to always chose mass storage mode from settings, if you don't have USB debugging turned on, a pop-up screen will appear with a button to turn USB mass storage on/off, or you can do it from the drop down status bar tap the USB connection notification and select mass storage.

[Q] How do I get the phone in mass storage mode when connected to a PC

I am trying to view the files on my phone on my PC at work. I am unable to install Kies. I have tried the USB Utilities section but it does not work. On my HTC when you plug the USB in it came up with a menu asking you what you wanted to do, is there sommething like this on Samsung phones?
FYI, this is my first Samsung phone.
Enable USB Debugging mode...not sure if it still needs the drivers for that though, I think you still might.
try pull down the top bar and select the usb message, then click on connect storage from pc
Tried that, still nothing. If you still need drivers thats rediculous! I should b able to plug my phone into any computer and view my sd card files, if not then its not much better than an iphone!
that's strange.. i got sgs2 delivered to my work today, so yeah I have no related software or drivers installed, plugged in and entered usb storage successfully.
Btw my PC is still on XP and i cancelled all the driver request that poped up
vinokirk said:
Tried that, still nothing. If you still need drivers thats rediculous! I should b able to plug my phone into any computer and view my sd card files, if not then its not much better than an iphone!
Click to expand...
Click to collapse
No drivers needed AFAIK for mass storage... Can you check device manager and see if it shows.
Got it:
-Enable usb debugging
-return to home screen
-plug usb cable in
-pull down status bar
-press ' connect usb storage' button
vinokirk said:
Got it:
-Enable usb debugging
-return to home screen
-plug usb cable in
-pull down status bar
-press ' connect usb storage' button
Click to expand...
Click to collapse
It works for the internal mass storage, but i have a 16GB Sandisk SDHC card installed... i used to see/find both the internal storage and the 16GB card in my computer after connecting through USB cable but suddenly from today i am not seeing the 16GB card though it is accessible through My Files on the phone.
Any help??
Ok it's very simple you go settings then wireless and networks,usb utilities,click turn on usb storage then connect cable to pc.
i go into settings and choose usb debugging this way it stops the kies pop up each time
Sent from my GT-I9100 using XDA App
vinokirk said:
Got it:
-Enable usb debugging
-return to home screen
-plug usb cable in
-pull down status bar
-press ' connect usb storage' button
Click to expand...
Click to collapse
There is another approach.
1- Disconnect cable from phone
2 - Disable (uncheck): Applications \ Development \ USB Debugging
3- Go to Wireless and network \ USB utilities
4- Click Connect storage to PC. A message will show up with a "Cancel" button. DO NOT CLICK IT.
5- Connect cable to phone. The little green robot will show up.
6- Click the button to enable USB mass storage.
Whats the catch?: If you only enable USB debugging, only the Extenal SD will mount. If you do this way, then Internal USB and Extenal, both, will be mounted.
dartveiga said:
There is another approach.
1- Disconnect cable from phone
2 - Disable (uncheck): Applications \ Development \ USB Debugging
3- Go to Wireless and network \ USB utilities
4- Click Connect storage to PC. A message will show up with a "Cancel" button. DO NOT CLICK IT.
5- Connect cable to phone. The little green robot will show up.
6- Click the button to enable USB mass storage.
Whats the catch?: If you only enable USB debugging, only the Extenal SD will mount. If you do this way, then Internal USB and Extenal, both, will be mounted.
Click to expand...
Click to collapse
tried this to no avail. After I connect cable at step 5, no little green guy, no option to choose? Any ideas?
Is it a proper data cable?
Sent from my GT-I9100 using XDA App
wickedsaint said:
It works for the internal mass storage, but i have a 16GB Sandisk SDHC card installed... i used to see/find both the internal storage and the 16GB card in my computer after connecting through USB cable but suddenly from today i am not seeing the 16GB card though it is accessible through My Files on the phone.
Any help??
Click to expand...
Click to collapse
The external storage is actually a sub directory on the phone storage, it's called external_sd_card iirc (if I remember correctly)
Welcome to the world of Samsung
UMS not mounting - W7
Hello, I have the same problem.
I have done the following already and it doesn't work:
·Updated Kies in hope to get the drivers for my phone.
·Looked for support in official Samsung website, thus downloading a program to install the drivers for my phone.
·Update through Windows update (failed in windows)
Also when i enable USB debugging mode I am forced to disable it just before turning on the USB Mass Storage. Doesn't mount and doesn't recognise phone (can't find in Device Manager).
I suppose I could live using the MTP way but still, like voiced by other people I would also like to have USB Mass Storage mode.
Thank you.
Solution:
I think I have found the solution, I have not tried this yet and supposedly you need CF-root kernel (so Siyah and other kernels might not work). Here is the link:
CLICK HERE
Like the author of that thread has said, I am not responsible if your phone gets bricked, stolen, eaten, drunk, chewed by your dog or anything of the sorts either directly or indirectly! USE AT YOUR OWN RISK!

[Q] Connected as Media Device (MTP) as default Instead detected as Mass Storage

When I plugged USB cable, my phone connected as media device (MTP) instead detected as Mass Storage.. Under Developer Options already checked USB Debugging.. I have to manually go to More in Wireless and Networks option then USB Utilities then select Connect Storage to PC.. How do i make it automatically detect as Mass Storage... I did uninstall certain system apps but is it related..? any idea guys??
nehalem176 said:
When I plugged USB cable, my phone connected as media device (MTP) instead detected as Mass Storage.. Under Developer Options already checked USB Debugging.. I have to manually go to More in Wireless and Networks option then USB Utilities then select Connect Storage to PC.. How do i make it automatically detect as Mass Storage... I did uninstall certain system apps but is it related..? any idea guys??
Click to expand...
Click to collapse
That the way it is with ICS. MTP connection is the default. There are solutions to make mass storage the default, check out this thread: forum.xda-developers.com/showthread.php?t=1548119 from about post #8 onwards
coversnail said:
That the way it is with ICS. MTP connection is the default. There are solutions to make mass storage the default, check out this thread: forum.xda-developers.com/showthread.php?t=1548119 from about post #8 onwards
Click to expand...
Click to collapse
thank you for your quick reply and appreciate your help.. guess in ICS need to 'always' select Connect to PC Storage in order to get Mass Storage connection...

how enter usb mass storage mode?

AOKP ICS Port Galaxy S GT-i9000 (http://forum.xda-developers.com/showthread.php?t=1524108)
I cant find usb mass storage mode (for internal card)when i connect my phone via usb to pc.
The computer reads the phone though.
The only was it connect is via recovery mode buts thats a pain to do everytime.
can you please tell me how to do it while phone is on OS? thank you
You have not in your notification : "USB connected / Select to copy files to/from your computer"?
Do you have drivers?
Sent from my Optimus Me using xda premium

Installing driver everytime I connect Z2 in MTP mode!

Greetings XDAians!
Help Me Pls!!!
Whenever I connect my Z2 to my PC via USB cable in MTP mode, the computer though detects the device but am unable to surf my Internal and External Card and thereafter I have to reinstall the driver for MTP and then only am able to see both the drives on my PC. I have to repeat this procedure each time I connect my cell.
But when I connect my device in MSC mode, there is no problem. My system immediately detects my phone and I can easily browse my SD card.
My system runs on Windows 7 64 bit.
Any help is highly appreciated.
Regards!
Are you using the same USB port?
Yes .. Indeed I use the same USB port to connect my Z2 every time!
And each time I restart my PC, I have to reinstall the driver for Z2 when connecting in MTP mode!
Please Help!
Am still having the same issue. Could anyone have any idea on this please? Help!

Categories

Resources