Related
Hi,anyone knows the best settings "setspu" for Samsung Galaxy Ace with Stock Rom?
Regards
setcpu won't work
over n out
what is setspu
dude read all the threads before asking..!!
theres already a thread in which we have discussed about this topic ..
and we dnt have any overclock kernel so no use of changing setting..!
and why u have to change setting...u can only reduce ur processor..!
Yup you could reduce clock speed if you want to save battery but it's not very stable.
Also the processor runs originally at 600 mhz but was overclocked by Samsung.
consegregate said:
Also the processor runs originally at 600 mhz but was overclocked by Samsung.
Click to expand...
Click to collapse
That's not true. The processor is designed to run at 800 by Qualcomm, as it is the newer "turbo" version of msm7227.
so, SetCPU does not working?! But why? I have SetCPU and i have the profiles:
ALL CHARGING: min 254 max 800 prior 100
Screen off: min 122 max 245 prior 78
Battery < 25%: min 245 max 480 prior 75
00:00 - 10:00 min 122 max 245 prior 70
Temp > 50.0 min 245 max 480 prior 100
Battery < 10% min 122 max 245 prior 61
This is optimal settings with "system logic", and now my cell working for a 2 day with much loading information and intensive using.
Been Undervolting on the Glitch Kernel, and trying different things. What I have set my UV to is just slightly too low I guess, because it keeps restarting..
Have never really Uv'd before and having troubles finding the Lowest possible..
These are my Settings ;
1500mhz - 0 = 1500mv
1440mhz - 25 = 1450mv
1400mhz - 25 = 1425mv
1300mhz - 25 = 1375mv
1200mhz - 25 = 1325mv
1000mhz - 50 = 1200mv
800mhz - 50 = 1150mv
400mhz - 50 = 1000mv
200mhz - 75 = 875mv
100mhz - 125 = 825mv
Any of this Look wrong?
Any Suggestions?
I dont belive you should UVing the OC... just makes sense that anything over 1ghz should stay with factory voltage settings. Could be part of the problem your having?
xplred said:
I dont belive you should UVing the OC... just makes sense that anything over 1ghz should stay with factory voltage settings. Could be part of the problem your having?
Click to expand...
Click to collapse
dragonmodz has undervolted the OC on his kernel i think so shouldnt matter but might do for some phones
Try 100mhz at 875 and if that doesn't work try 1225 on 1000mhz
Sent from my SGH-T959 using XDA App
It heats up very quickly with the new update 2.3 the
998 MHz microprocessor works all the time.
view with setcpu or temp+cpu v2
you check it is not normal
It is the work of the microprocessor in the update 2.3 Whenever
is at 998 mhz.
in 2.1 this happened I never ever was 245 MHz but is now only 998 mhz
any solution?
Are you sure?
But i thinking SetCPU working not properly.
shinji_x19 said:
It heats up very quickly with the new update 2.3 the
998 MHz microprocessor works all the time.
view with setcpu or another program
2.1 was not so
any solution?
Click to expand...
Click to collapse
I can not confirm that.
Pointed this out a while ago with no replies from anyone. If you look at time in state in setcpu, you see that both go up at the same time but more time is spent at 1ghz. My phone is staying cool though but I'm worried about the cpu working too much.
Sent from my X10i using XDA App
changeofseasons said:
Pointed this out a while ago with no replies from anyone. If you look at time in state in setcpu, you see that both go up at the same time but more time is spent at 1ghz. My phone is staying cool though but I'm worried about the cpu working too much.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
you're right
Sony Ericsson to give it more fluidity increase the kernel OC
this can damage our cellular ¬ ¬
Why are these threads popping up in DEV section?
Someone please contact mods for cleanup...
Sent from my X10i using XDA App
my problem too !!
This program shows how much time the processor runs at a given frequency.
http://market.android.com/search?q=pname:com.bvalosek.cpuspy
QR:
i can confirm
cpucpy state :-
998 mhz = 52%
768 mhz = 0%
576 mhz = 0%
384 mhz = 0%
245 mhz = 1%
Deep Sleep = 45%
using pre rooted 2.3.3 stock with bravia 100% and fps uncap
but i either extreamly play or let the x10 sleep ...... i'll test again later and tell
hemo1001 said:
i can confirm
cpucpy state :-
998 mhz = 52%
768 mhz = 0%
576 mhz = 0%
384 mhz = 0%
245 mhz = 1%
Deep Sleep = 45%
using pre rooted 2.3.3 stock with bravia 100% and fps uncap
but i either extreamly play or let the x10 sleep ...... i'll test again later and tell
Click to expand...
Click to collapse
Same here. Always on 998 MHz or Deep-Sleep. ~1% on 245MHz, the rest nearly 0%...
but it's weird, battery life is great...better than 2.1, yet all it's using is 1GHz or deep sleep, nothing inbetween...
i can not confirm this
998 - 0:10:17
768 - 0:00:06
576 - 0:00:03
384 - 0:07:31
245 - 0:03:17
DS - 1:09:10
im on wb with hotfix 3 and bravia engine
I was having same problem... heating and eating a lot of battery
I've found out that was an application that was killing it.... I've removed the app and now is rolling well...
CPU does indicate 998Mhz all the time even when it's not doing anything... Does this "ruin" the CPU?
Cheers.
After some research, I've chosen to run -50 up to 1,000Mhz.
I've ran V.11 HL at -50 from 100 to 1000 with NO problems. Then I tried ML at -50 across the board with no problems and now I'm running LL at -50.
My question is whether anyone has compiled user settings into one location to find patterns. That is, does 100Mhz generally perform better at -25 or -250mv? How about 200, or 400...?
Has this been attempted?
My hope is to find a trend to aide in finding the 'best' settings based on many users.
ML Settings
I'll start.
Now running:
Mhz UV/OC
1,400 -0
1,300 -50
1,200 -50
1,000 -0
800 -25
400 -25
200 -25
100 -25
Problems encountered
None after 12hrs
Phone did some funny things when attempting to fix brightness to high while outside. This was while using the above settings on the Low Leak platform. I am now reverting back to the High Leak to play around some more.
I've run -25 from 100-1,000Mhz for nearly 24hours without any problems.
Here's what I've had setup for a few weeks and I have zero problems whatsoever. Using Medium Leakage.
1300 MHz - [email protected] 217 MHz - 1.400V / -50mV
1200 MHz - [email protected] 200 MHz - 1.350V / -50mV
1000 MHz - [email protected] 200 MHz - 1.250V / -50mV
800 MHz - [email protected] 200 MHz - 1.200V / -75mV
400 MHz - [email protected] 200 MHz - 1.050V / -100mV
200 MHz - [email protected] 200 MHz - 0.950V / -150mV
100 MHz - [email protected] 100 MHz - 0.950V / -200mV
I would like to know what kind of battery life everyone's getting. With light use, my phone drains 5% an hour.
The new glitch 12 has some recommended setting in the op.
Good staring point
sent from outerspace
Wait...your settings are right in line with op.
My bad!
sent from outerspace
Updated
Samsung Fascinate
CDMA
ROM ED05
MIUI 1.9.16
Glitch v12 ML (9/15/11)
Voltage Control
deadline / ondemand
200-1300
1300 -25
1200 -25
1000 -50
800 -50
400 -75
200 -75
Just set it last night. Will report back on progress later.
dblash,
From MIUI 1.8.26 to 1.9.16; from using Glitch to non Glitch, I average about 18 hours of battery life under 'normal' use. normal should be understood as about 30-45min heavy usage in the morning, about 15min over lunch, and about 1hr of heavy use in the evening. My screen brightness is usually set to full brightness too.
My settings are
1.4GHz / -50mV
1.3GHz / -50mV
1.2GHz / -50mV
1.0GHz / -50mV
800MHz / -75mV
400MHz / 75mV
200MHz / 100mV
Sent from my SCH-I500 using XDA App
Keep having little Glitches with the Newest Glitch kernel. Decided to remove it and troubles go away. I'm currently running stock (MIUI 1.9.16) settings without any kernel
What are the glitches your having?
Sent from my SCH-I500 using XDA App
dblash said:
Here's what I've had setup for a few weeks and I have zero problems whatsoever. Using Medium Leakage.
1300 MHz - [email protected] 217 MHz - 1.400V / -50mV
1200 MHz - [email protected] 200 MHz - 1.350V / -50mV
1000 MHz - [email protected] 200 MHz - 1.250V / -50mV
800 MHz - [email protected] 200 MHz - 1.200V / -75mV
400 MHz - [email protected] 200 MHz - 1.050V / -100mV
200 MHz - [email protected] 200 MHz - 0.950V / -150mV
100 MHz - [email protected] 100 MHz - 0.950V / -200mV
I would like to know what kind of battery life everyone's getting. With light use, my phone drains 5% an hour.
Click to expand...
Click to collapse
pretty similar to this voltages, too lazy to type it out.
Sent from my MIUI SCH-i500
Most recent glitch was Google+ fc-ing 4 times when trying to type. Reflashed MIUI and fc goes away. There were several less critical issues as well.
Sent from my SCH-I500 using XDA App
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
I'd go lower, but haven't really bothered.
Sent from my SCH-I500 using XDA App
Glitch updated last night and fixed all of the lag issues, things are working much much better now.
I'm wondering what settings people are using for undervolting. I'm running Neutrino v2.5 GT with the patch and supercharger. Seems like if I set anything above 50 I get a reboot. Kinda a total noob when it comes to UV so any help would be appreciated
I would like to know this too please.
Sent from my MB860 using XDA
I'm currently running this:
1300: -150
1200: -100
1100: -50
1000: -50
800: -50
456: -100
216: -150
I've tried lower but I started getting reboots, at these voltages it's been good for a few days now.
Every Atrix isn't the same so while one set may work for one persons phone it may not on yours. One thing, though. DO NOT break the 100mv limit. Meaning if 1GHz is at 1000mv, then the step below it (912MHz if you're on a 1GHz kernel) shouldn't go below 900mv. This is a limit on the Tegra 2 set by Nvidia and going passed the 100mv limit cancels out undervolting across the board. Meaning if 1GHz is at 1000mv and you set 912MHz to 875mv or lower, it won't matter what the undervolting application says. Your phone will NOT be undervolted. I'm able to under volt fairly well and I usually stick to 1GHz kernels to save on battery. If you're using a 1GHz kernel, try leaving the first two frequencies alone (don't change 1GHz or 912 MHz). Here's what I've been using on CM9 with faux123's 1GHz kernel:
1GHz - no change
912MHz - 25
750MHz - 50
608MHz - 95
456MHz - 105
312MHz - 115
216MHz - 135
This has been stable for me since I got my Atrix and works really well on a couple of my friend's Atrix. If this causes reboots then set 912MHz back to no change at 950mv and I can almost promise you the problem will be fixed. Also, if you're a battery saving whore like I am and you're on AT&T, flash the N_01.100.00R European radio. This will allow you to set your phone to GSM Only by dialing *#*#4636#*#* and changing GSM auto (PRL) and use the EDGE (2G) service providing you with MUCH better battery life. If you need the higher speeds then switch back or simply reboot the phone. Hope this information helps.
On a side note, underclocking is another useful way to conserve battery. I never did this on GB ROMs as everything became terribly slow, but on ICS, underclocking barely hinders performance. I have mine underclocked at 750MHz and in terms on scrolling, opening apps, playing games, web surfing, even moving through homescreens, it still outperformed any GB ROM I've used at 1GHz and even 1.3GHz. Even benchmarks are fairly the same. Going on 53 hours with HEAVY usage. e.g. Web browsing all day, texting, few phone calls, and playing games.
Sent from my AT&T CM9 MB860 on EDGE
I'm on Turl's CM9 build v9 with faux123's 1GHz kernel and I undervolt to:
1GHz - 950 mV (-50)
912 - 930 mV (-20)
750 - 830 mV (-70)
608 - 730 mV (-120)
456 - 630 mV (-170)
312 - 530 mV (-245)
216 - 430 mV (-320)
I tried an extreme that someone else had on their Atrix with 216 MHz at 400 mV, and 100mV increment up and my phone became unstable (with 912 MHz at 900mV). Following some other people's advice to undervolt less at 912MHz I arrived at my current setting that is stable for my phone.
I'm using Neutrino 2.2 with the latest faux kernel because I couldn't get phone to deep sleep with 2.5 even with the update installed.
I used pimp my cpu and managed these undervolts, it wouldn't let me go past -250mV is that normal?
1300Mhz -125 mV = 1175 mV
1200Mhz -100 mV = 1100 mV
1100Mhz -50 mV = 1050 mV
1000Mhz -50 mV = 950 mV
800Mhz - 175 mV = 725 mV
456 Mhz - 200 mV = 600 mV
216 Mhz - 250 mV = 500 mV
I was quite surprised of the jump in mV to 1000Mhz, it just wouldn't take any lower voltage without freezing. But I have extended my battery life loads by using pimpmycpu its cool as. Also from the above post does that mean my 800Mhz undervolt is ok or not?
Enkidu1978 said:
I'm using Neutrino 2.2 with the latest faux kernel because I couldn't get phone to deep sleep with 2.5 even with the update installed.
I used pimp my cpu and managed these undervolts, it wouldn't let me go past -250mV is that normal?
1300Mhz -125 mV = 1175 mV
1200Mhz -100 mV = 1100 mV
1100Mhz -50 mV = 1050 mV
1000Mhz -50 mV = 950 mV
800Mhz - 175 mV = 725 mV
456 Mhz - 200 mV = 600 mV
216 Mhz - 250 mV = 500 mV
I was quite surprised of the jump in mV to 1000Mhz, it just wouldn't take any lower voltage without freezing. But I have extended my battery life loads by using pimpmycpu its cool as. Also from the above post does that mean my 800Mhz undervolt is ok or not?
Click to expand...
Click to collapse
Your phone isn't undervolted at all since you broke the 100mv limit. Might show that you are, but the phone is still running with high power consumption.
Also, if you wanna go lower, get SetCPU. Goes all the way down to -500mv and doesn't lock you to increments of 25. You can set any value such as -69mv, -146mv, etc.
Sent from my AT&T CM9 MB860 on EDGE
I'm using the 1.3ghz kernel anyone got safe recommendations not breaking the 100mw rule
Sent from Atrix 4g Neutrino 2.5
I'm running faux 1.3 too n that's wat I'm trying to figure out too. Because according to what you're saying I'd only be able to UV at lowest 2 or 3 speeds
squee666 said:
I'm using the 1.3ghz kernel anyone got safe recommendations not breaking the 100mw rule
Sent from Atrix 4g Neutrino 2.5
Click to expand...
Click to collapse
As I stated earlier, not ever phone is built the same. What works for someone else may not work for you.
CREAPFACE said:
I'm running faux 1.3 too n that's wat I'm trying to figure out too. Because according to what you're saying I'd only be able to UV at lowest 2 or 3 speeds
Click to expand...
Click to collapse
The best idea is to do minimal undervolting on higher frequencies as they need more power and do the more intense undervolting on lower frequencies.
I changed mine up, a bit. This is what I'm working with, now:
1GH no change = 1000mv
912MHz -25mv = 925mv
750MHz -50mv = 850mv
608MHz -100mv = 750mv
456MHz -150mv = 650mv
312MHz -225mv = 550mv
216MHz -300mv = 450mv
To me, undervolting is a way to mainly save power, further, when the screen is off while conserving as much as I can when I'm actually using the phone.
Sent from my AT&T CM9 MB860 on EDGE
Pretty sure it just the rom. Switched to redpill to test it and with undervolting I had %60 battery left after all day of heavy use.
Im on jokersax 0.33, installed setcpu, but i dont see voltages menu at all.
Can somebody guide me pls
Sent from my MB860 using XDA
Its the 3rd tab at the top. It says main, then profiles, then voltages. Not sure if its on there if your not running a custom kernel
CREAPFACE said:
Its the 3rd tab at the top. It says main, then profiles, then voltages. Not sure if its on there if your not running a custom kernel
Click to expand...
Click to collapse
Thats y maybe,.. i am on kernel which comes with jokersax ROM, so probably i cannot get it ;(
EDIT: Yes, i installed http://www.jokersax.com/upload/Atrix-CM9-Kernel-025b-ext4-1.00GHz.zip and i got Voltage tab.
I am testing Neroga settings now.
akyboy said:
Thats y maybe,.. i am on kernel which comes with jokersax ROM, so probably i cannot get it ;(
EDIT: Yes, i installed http://www.jokersax.com/upload/Atrix-CM9-Kernel-025b-ext4-1.00GHz.zip and i got Voltage tab.
I am testing Neroga settings now.
Click to expand...
Click to collapse
Phone froze 2 times and restarted, restoring from standby.
Any ideas what i should change?
Tnx
You have to start out pretty low and work ur way up til u don't get any reboots. Also I'd try faux123's kernel the 1.3 is where its at
I couldn't find any voltage tab
I've tried the standard kernel that comes with the neutrino and faux 1,45ghz for cm7...
Any suggestion?
Neroga said:
Every Atrix isn't the same so while one set may work for one persons phone it may not on yours. One thing, though. DO NOT break the 100mv limit. Meaning if 1GHz is at 1000mv, then the step below it (912MHz if you're on a 1GHz kernel) shouldn't go below 900mv. This is a limit on the Tegra 2 set by Nvidia and going passed the 100mv limit cancels out undervolting across the board. Meaning if 1GHz is at 1000mv and you set 912MHz to 875mv or lower, it won't matter what the undervolting application says. Your phone will NOT be undervolted. I'm able to under volt fairly well and I usually stick to 1GHz kernels to save on battery. If you're using a 1GHz kernel, try leaving the first two frequencies alone (don't change 1GHz or 912 MHz). Here's what I've been using on CM9 with faux123's 1GHz kernel:
1GHz - no change
912MHz - 25
750MHz - 50
608MHz - 95
456MHz - 105
312MHz - 115
216MHz - 135
This has been stable for me since I got my Atrix and works really well on a couple of my friend's Atrix. If this causes reboots then set 912MHz back to no change at 950mv and I can almost promise you the problem will be fixed. Also, if you're a battery saving whore like I am and you're on AT&T, flash the N_01.100.00R European radio. This will allow you to set your phone to GSM Only by dialing *#*#4636#*#* and changing GSM auto (PRL) and use the EDGE (2G) service providing you with MUCH better battery life. If you need the higher speeds then switch back or simply reboot the phone. Hope this information helps.
On a side note, underclocking is another useful way to conserve battery. I never did this on GB ROMs as everything became terribly slow, but on ICS, underclocking barely hinders performance. I have mine underclocked at 750MHz and in terms on scrolling, opening apps, playing games, web surfing, even moving through homescreens, it still outperformed any GB ROM I've used at 1GHz and even 1.3GHz. Even benchmarks are fairly the same. Going on 53 hours with HEAVY usage. e.g. Web browsing all day, texting, few phone calls, and playing games.
Sent from my AT&T CM9 MB860 on EDGE
Click to expand...
Click to collapse
Can you explain exactly how you set your phone to 2G only? Reason I'm asking is 'cause I flashed the radio you mentioned and tried to use 2G only, but it keeps resetting back to gsm/cdma (prl).
Switched to neutrino EE n haven't had a problem since. Battery will last me 2 days