I'm currently running Comm Rom 1.3 with OTB 1.3 kernel on ED01. I was just wondering what the best way to get to ED03 is. Thanks in advance.
Bow chika wah wah
DirgeExtinction said:
I'm currently running Comm Rom 1.3 with OTB 1.3 kernel on ED01. I was just wondering what the best way to get to ED03 is. Thanks in advance.
Bow chika wah wah
Click to expand...
Click to collapse
Why do you want ED03? It was a very small fix for devices who weren't able to update OTA from EA28, and a software fix for the camera, which would be overwritten if you reflashed CommRom anyways. Everything else is most likely exactly the same as ED01
DirgeExtinction said:
I'm currently running Comm Rom 1.3 with OTB 1.3 kernel on ED01. I was just wondering what the best way to get to ED03 is. Thanks in advance.
Bow chika wah wah
Click to expand...
Click to collapse
There is only one way that I know of, Odin this: http://adrynalyne.us/files/stuff/CI500_VZW_DL09_ECLAIR.tar.md5 This will get you to DL09. From there simply go to settings>about phone>system updates and update to EA28 and then do it again and update to ED03.
If you don't care about the modem, I have the Odin package available in the Dev forum.
kidserious said:
There is only one way that I know of, Odin this: http://adrynalyne.us/files/stuff/CI500_VZW_DL09_ECLAIR.tar.md5 This will get you to DL09. From there simply go to settings>about phone>system updates and update to EA28 and then do it again and update to ED03.
Click to expand...
Click to collapse
Thanks.
@imnuts: Yeah, I saw that. I've just heard some good things about the ED03 radio that I want to try it. I might check out your thread,though. Do you think I'd be able to use the Comm Rom while on ED03?
Bow chika wah wah
Yes, I'm on the ED03 modem and KangBang now.
EDIT: The modem also has the same TWS bug as ED01 did.
imnuts said:
Yes, I'm on the ED03 modem and KangBang now.
EDIT: The modem also has the same TWS bug as ED01 did.
Click to expand...
Click to collapse
Sorry for the question,but...TWS?
Bow chika wah wah
DirgeExtinction said:
Sorry for the question,but...TWS?
Click to expand...
Click to collapse
Time-Without-Signal.
bmeek said:
Time-Without-Signal.
Click to expand...
Click to collapse
Thanks.
Hey folks
Well I have had my share of messups with my vzn fsc.
Things are settled now as I have been Ble to figure out the stuff.
So after trying superclen, evilfascination, and community rom I have come to the conclusion that personally (and no offence to no one) I like the stock roms more but without the samsung and verizon bloatware.
Could you great guyz suggest me the best debloated and all stock rom which is smooth to operate, has great battery life and doesnt hVe any known issues.
I would b highly thankful for the help, pl link me to the threads guyz.
Regards
UPDATE : guyz the kind suggestion given my dnoyeb here in the second post is really awesome and i suggest all should try this.
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt click here
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing click here
Install imnuts -100 voodoo (or -50 or stock voltage) click here
Installed latest su zip pack (probably not needed) click here
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package click here
The shortlight package click here
Rebooted, all done.
Great battery life, runs great with launcherpro
Click to expand...
Click to collapse
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt click here
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing click here
Install imnuts -100 voodoo (or -50 or stock voltage) click here
Installed latest su zip pack (probably not needed) click here
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package click here
The shortlight package click here
Rebooted, all done.
Great battery life, runs great with launcherpro
Sent from my SCH-I500 using Tapatalk
Thats awesome, how long hVe u been using it?
Also I actually want things as stock as poasible without the bloat.
Anything else u feel would be like that?
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing
Install imnuts -100 voodoo
Installed latest su zip pack (probably not needed)
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package
The shortlight package
Rebooted, all done.
Great battery life, runs great with launcherpro
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
That's exactly where I ended up before trying the miuiwiz rom... For some reason that I've yet to identify, I'm getting better battery life on miuiwiz. Launcher Pro, perhaps?
Sent from my SCH-I500 using XDA Premium App
bmeek said:
That's exactly where I ended up before trying the miuiwiz rom... For some reason that I've yet to identify, I'm getting better battery life on miuiwiz. Launcher Pro, perhaps?
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Personally I like my scrollable widgets way to much to do miui.
Sent from my SCH-I500 using Tapatalk
lord dredd said:
Thats awesome, how long hVe u been using it?
Also I actually want things as stock as poasible without the bloat.
Anything else u feel would be like that?
Click to expand...
Click to collapse
Just leave off my last two steps and its about as stock as you can get.
Sent from my SCH-I500 using Tapatalk
dnoyeb said:
Just leave off my last two steps and its about as stock as you can get.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
actually updating is gonna be an issue ;P
i am using the handset in India and have added Indian operator's settings in it so update via SETTINGS>ABOUT PHONE >SYSTEM UPDATES aint possible
so practically no way to flash the ed03 i guess
ED01 is not gonna be any issue as i can go back to dl09 eclair of adreyn anytime and then update to ed01 stock through his EA28 and ED01 updates.
after that ed03 ?????? i donno from where and how
if you have any other way of accomplishing all ur stuff then pl help
regards
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing
Install imnuts -100 voodoo
Installed latest su zip pack (probably not needed)
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package
The shortlight package
Rebooted, all done.
Great battery life, runs great with launcherpro
Do you have the link to Sbrissen's TSM mod package? And, what is the shortlight package? Thanx!
Do you have the link for Sbrissen's TSM mod? And, what is the shortlight package? Thanx.
Sent from my SCH-I500
Click to expand...
Click to collapse
dnoyeb said:
Personally I like my scrollable widgets way to much to do miui.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
then install aluncher pro on miui
come on folks
just help me out here find a debloated ed01 ( without verizon crap ) and the method to update from evil fascination 3.5.x to it
regards
lord dredd said:
come on folks
just help me out here find a debloated ed01 ( without verizon crap ) and the method to update from evil fascination 3.5.x to it
regards
Click to expand...
Click to collapse
What more do you want than dnoyeb's instructions? It doesn't get more simple than that.
landshark68 said:
What more do you want than dnoyeb's instructions? It doesn't get more simple than that.
Click to expand...
Click to collapse
ok i am gonna try this out , but as i mentioned earlier i cant do OTA to ed03 as the handset is being used in India with indian operator settings
what i am gonna do is i ll update to ed01 as has been advised by adreyn ( that is stock dl09 then ea28 and then ed01)
after that i ll follow this thread
http://forum.xda-developers.com/showthread.php?t=1097355
and update the radio to ed03
is that alright ???
and if thats right then i ll follow the further instructions .
regards
EDIT 1 :
ok i couldnt wait for the replies to my post here and my Pms to you good guys as i have to go so i did the following
updated to Ed01 thru this
http://forum.xda-developers.com/showthread.php?t=1044474
then flashed the full Odin package of ed03 by imnut
then followed the process told by dnoyeb here
http://forum.xda-developers.com/showpost.php?p=14034421&postcount=2
at boot time verizon and android both were flashing but i still waited so now the system is fully booted
and i am gonna use it now
but the thing is the baseband and everything showz ed01 and not ed03 ???
regards
lord dredd said:
ok i am gonna try this out , but as i mentioned earlier i cant do OTA to ed03 as the handset is being used in India with indian operator settings
what i am gonna do is i ll update to ed01 as has been advised by adreyn ( that is stock dl09 then ea28 and then ed01)
after that i ll follow this thread
http://forum.xda-developers.com/showthread.php?t=1097355
and update the radio to ed03
is that alright ???
and if thats right then i ll follow the further instructions .
regards
EDIT 1 :
ok i couldnt wait for the replies to my post here and my Pms to you good guys as i have to go so i did the following
updated to Ed01 thru this
http://forum.xda-developers.com/showthread.php?t=1044474
then flashed the full Odin package of ed03 by imnut
then followed the process told by dnoyeb here
http://forum.xda-developers.com/showpost.php?p=14034421&postcount=2
at boot time verizon and android both were flashing but i still waited so now the system is fully booted
and i am gonna use it now
but the thing is the baseband and everything showz ed01 and not ed03 ???
regards
Click to expand...
Click to collapse
If you followed the steps by dnoyeb, then you are correctly set up on a debloated/deodexed ED01 ROM. Your baseband is the modem/radio and would not have changed after you followed Adrynalyne's post to get to ED01 quickly. You flashed imnuts' ED03 ODIN package which would have given you the stock ED03 ROM and kernel, but not the ED03 modem so you were still at ED01 modem which is fine. Then you followed dneyob's steps to flash the ED01 Debloated/Deodexed ROM which would have changed you to the ED01 build from ED03 build. For all intents and purposes ED01 and ED03 are the same thing. ED03 simply added in a fix for those people who could not receive the ED01 OTA update. The verizon and android both flashing at the same time is just an overlapping boot animation that happened because as I recall you could not do a complete data wipe/factory reset for fear of losing the verizon network while you are in India. So other than that little quirk of the overlapping boot animations, you should be exactly where you wanted to end up - a debloated ED01 ROM and with imnuts' -100mv kernel you should see better battery life if your phone can handle the undervolting.
Congrats!
i guess i did exactly as you have outlined,
i am now gonna caliberate the battery and will revert tomorrow about the backup and stuff
love ya
regards
when i first was learning how to root and flash, the thread for the evilfascination rom taught me everything i know. it does a great job in describing the steps to root and then flash the rom. i personally stuck with the evil fascination because its been so stable from the getgo and i love the overall theme of it. I kept getting peculiar bugs with comrom that i did not know enough yet to try and fix.
I suggest you go to the fascinate android development forum, and read the evil fascination thread.
I updated my post on the first page with links incase anyone else was looking at a quick rundown with links on how to get to a fully rooted / debinged / debloated type setup quickly.
Thanks a bunch matey.
God bless.
sent from my vzn fsc 1474 quadrant score
for what is worth it, i did OTA to ED03, then flashed CWM and installed SU package, from there i debloated it myself with root explorer, replaced the few apk for the apps i wanted AOSP, cant get any cleaner than that.
Snakehn said:
for what is worth it, i did OTA to ED03, then flashed CWM and installed SU package, from there i debloated it myself with root explorer, replaced the few apk for the apps i wanted AOSP, cant get any cleaner than that.
Click to expand...
Click to collapse
so you mean u didnt go for debloated ed01 from adryn and not even the kernal ?
if yes then someday i might also wanna try this out, coz as and when i use 3G my battery drains like hell with the debloated setup as well.
would appreciate some more suggestions.
regards
with EA28 and ED04 + PBJ sv 531 kernal i get pretty much good backup and good 3g speeds too.
missed call was the issue which i am trying to solve with softlocker, seems to work
I just flashed the leanKernel v2.6.0 with stock ROM and now my 4g won't work. Any suggestions?
jontzeng said:
I just flashed the leanKernel v2.6.0 with stock ROM and now my 4g won't work. Any suggestions?
Click to expand...
Click to collapse
What stock ROM? Froyo? I'm surprised it worked at all if that was the case. That's a gingerbread kernel.
It is? according to http://forum.xda-developers.com/showthread.php?t=1081930, it said that the Imoseyon's Sense leankernel is a Froyo Kernel...
I'm running http://forum.xda-developers.com/showthread.php?t=1160374 and noticed the warning about how I can't run custom kernels too late.
jontzeng said:
It is? according to http://forum.xda-developers.com/showthread.php?t=1081930, it said that the Imoseyon's Sense leankernel is a Froyo Kernel...
I'm running http://forum.xda-developers.com/showthread.php?t=1160374 and noticed the warning about how I can't run custom kernels too late.
Click to expand...
Click to collapse
Yep. You're right. I missed that.
So how would I get to fixing my phone?
jontzeng said:
So how would I get to fixing my phone?
Click to expand...
Click to collapse
reflash without a wipe
I upgraded my sgs2 from unnamed 2.2.1 to SHOStock 2.1 and I was wondering how I could go back to UnNamed 2.2.1? I tried looking around, but I couldn't find a definite answer. Should I just boot into recovery and flash the unnamed zip? Or what should I do?
Thanks
Just do a full wipe and flash whatever ROM you want. I don't think it matters if you're coming from ICS.
AraboDroid said:
Just do a full wipe and flash whatever ROM you want. I don't think it matters if you're coming from ICS.
Click to expand...
Click to collapse
that's right, but make sure the modem flashes as well.
You could just restore the nandroid backup, which you saved right before you flashed...
Scrambo said:
that's right, but make sure the modem flashes as well.
Click to expand...
Click to collapse
All modems that work with this device are interoperable. I'm still on UCKH7 with ICS.
Just restore your nandroid, that's all.
Sent from my GT-N7000 using Tapatalk 2
Like the others said, if you don't have a nandroid backup, just do a full wipe & flash unnamed. I'm pretty sure it will flash the modem that unnamed comes with, but you wouldn't have to worry about modems anyway.
further to add I think unNamed comes with KH6
Nosferatu. said:
further to add I think unNamed comes with KH6
Click to expand...
Click to collapse
KK6. No such thing as KH6.
mattdm said:
KK6. No such thing as KH6.
Click to expand...
Click to collapse
typo
Good
Hi,
I'm running Slimbean right now and it's a great rom. I want to try the stable Cynogen 7.2 and was wondering if there are any special steps i need to take to avoid any potential problems?
Thanks!
Flash a GingerBread kernel like Glitch(not the ICS one) and reboot into recovery and flash CM7... You do know CM7 is gingerbread not froyo right?
Dougfresh said:
Flash a GingerBread kernel like Glitch(not the ICS one) and reboot into recovery and flash CM7... You do know CM7 is gingerbread not froyo right?
Click to expand...
Click to collapse
I always thought it is best to Odin to stock then flash a froyo or GB ROM when coming from ICS or JB?
sent from the depths of helly bean
Dougfresh said:
Flash a GingerBread kernel like Glitch(not the ICS one) and reboot into recovery and flash CM7... You do know CM7 is gingerbread not froyo right?
Click to expand...
Click to collapse
thanks and no/yes lol i got lost with the numbering system
CM- 7 = gingerbread
CM-8= honeycomb
CM-9 = ICS
samsgun357 said:
I always thought it is best to Odin to stock then flash a froyo or GB ROM when coming from ICS or JB?
sent from the depths of helly bean
Click to expand...
Click to collapse
Nah, there's no need to odin just fully wipe and blast away. I haven't Odined in about 4-5 months and I flash a lot :laugh: If I get into a pickle and can't bring it back , then I go back to JFD