Fro the latest Froyo rom I could find the following Secret Dial Codes:
Code:
#7465625*27*# CP lock key input
#7465625*638*# Netwerk lock key input
#7465625*77*# SP lock key input
#7465625*782*# network subset key input
*7465625*27*# same but setup the locks
*7465625*638*#
*7465625*77*#
*7465625*782*#
*#*#28346#*#* audio tuning (stream, situation, soundbooster, equal)
*#0*# Tests (magnetic sensor calib,lcd,camera etc.)
*#0002*28346# ?
*#0002*28347# ?
*#0011# serv - wcdma
*#0228# batt stat
*#0283# serv - Audio loopback
*#0289# melody test
*#03# nand flash number
*#0368# FM radio
*#0599# ?
*#06# IMEI
*#0673# melody test
*#07# Test History
*#0782# PDA RTC Get (date)
*#0842# Vibrate test
*#1*# ?
*#1111# ser- wdcma
*#1234# version rom
*#12580*369# version pda
*#147852# ?
*#1575# serv - gps
*#197328640# serv - Main service menu
*#2222# serv - wdcma
*#2263# serv - band preference
*#22736224# acc sensor calib test
*#232331# BT rf test
*#232332# ?
*#232337# BT device address
*#232338# WLAN mac address
*#232339# WLAN tx / rx test
*#2424# ?
*#2454# RAM DUMP MODE
*#2580# serv - Integrity control on/off (efs?)
*#2663# Firmware version / update button
*#2664# Little blue line paint
*#272*
*#272886# ?
*#273283*255*3282*# Data create / sms
*#273283*255*663282*# Data create System / User space
*#2767*2878# serv - GPRS auto power on/off
*#279301# serv - RRC(HSPA) control
*#301279# serv - RRC(HSPA) control
*#3214789# GcfModeSettings enable/disable
*#3214789650# GpsSetup2
*#32489# serv - ciphering contr. on/off
*#3264# RAM version
*#3282*727336*# Data create overview
*#34971539# ?
*#367# ?
*#3695147# ?
*#369852# testApnSettings
*#4238378# serv - GCF
*#42663# Brightness
*#44336# Internal version Build/Changelist number
*#46744674# ?
*#4736767*738# Acc sensor Min/Max Calibr. enable
*#526# WLAN tx / rx test
*#528# WLAN tx / rx test
*#6854123# ?
*#6984125*# serv - ?
*#7263867*6633# Ramdump Enable/Disable
*#7284# serv - Diag config UART/USB
*#7298# ?
*#7353# Test menu melody/camera/accel.
*#7412365# ?
*#742690# ?
*#745# Sec_Ril_Dump Logs etc (generate random wifi mac address)
*#746# Svc_Dbg_Dump logs etc
*#7465625# Perso status (network/provider locks)
*#7594# Shutdown en/dis long Call End press
*#7780# Factory Reset question
*#865625# ?
*#872564# kills service mode app (?)
*#8736364# ?
*#9090# serv - Diag config UART/USB
*#9900# SysDump Logs RIL/DEBUG/ disable fast dormancy
*2767*3855# HARD RESET (no question asked !!)
*2767*4387264636# serv - sms test
*2767*738767 633# serv - sms to be sent...
*2767*738767 66# serv - sms set product code...
*2767*738767 7763# ...
*2767*738767 8378# ....
Cheers
Thought I would compile a list of USSD codes for everyones reference. I have tested most if anybody has any to add please feel free.
****Warning some of these codes can be harmful( wipe data and ect.) I am not responsible for anything you do to your device****
Some of these codes may lead you to a menu use the option key (far left soft key) to navigate
Some of the functions may be locked to our use but im still working on how to use these menus more extensively
Information
*#44336# Software Version Info
*#1234# View SW Version PDA, CSC, MODEM
*#12580*369# SW & HW Info
*#197328640# Service Mode
*#06# = IMEI Number.
*#1234# = Firmware Version.
*#2222# = H/W Version.
*#8999*8376263# = All Versions Together.
*#272*imei#* Product code
*#*#3264#*#*- RAM version
*#92782# = Phone Model
*#*#9999#*#*= Phone/pda/csc info
Testing
*#07# Test History
*#232339# WLAN Test Mode
*#232331# Bluetooth Test Mode
*#*#232331#*#*- Bluetooth test
*#0842# Vibration Motor Test Mode
*#0782# Real Time Clock Test
*#0228# ADC Reading
*#32489# (Ciphering Info)
*#232337# Bluetooth Address
*#0673# Audio Test Mode
*#0*# General Test Mode
*#3214789650# LBS Test Mode
*#0289# Melody Test Mode
*#0589# Light Sensor Test Mode
*#0588# Proximity Sensor Test Mode
*#7353# Quick Test Menu
*#8999*8378# = Test Menu.
*#*#0588#*#*- Proximity sensor test
*#*#2664#*#*- Touch screen test
*#*#0842#*#*- Vibration test*
Network
*7465625*638*# Configure Network Lock MCC/MNC
#7465625*638*# Insert Network Lock Keycode
*7465625*782*# Configure Network Lock NSP
#7465625*782*# Insert Partitial Network Lock Keycode
*7465625*77*# Insert Network Lock Keycode SP
#7465625*77*# Insert Operator Lock Keycode
*7465625*27*# Insert Network Lock Keycode NSP/CP
#7465625*27*# Insert Content Provider Keycode
*#7465625# View Phone Lock Status
*#232338# WLAN MAC Address
*#526# WLAN Engineering Mode -runs wlan tests (same as below)
*#528# WLAN Engineering Mode
*#2263# RF Band Selection-not sure about this one appears to be locked
*#301279# HSDPA/HSUPA Control Menu---change HSDPA classes (opt. 1-5)
Tools/Misc.
*#*#1111#*#*- Service Mode
#273283*255*663282*# Data Create SD Card
*#4777*8665# = GPSR Tool.
*#4238378# GCF Configuration
*#1575# GPS Control Menu
*#9090# Diagnostic Configuration
*#7284# USB I2C Mode Control—mount to usb for storage/modem
*#872564# USB Logging Control
*#9900# System dump mode- can dump logs for debugging
*#34971539# Camera Firmware Update
*#7412365# Camera Firmware Menu
*#273283*255*3282*# Data Create Menu- change sms, mms, voice, contact limits
*2767*4387264636# Sellout SMS / PCODE view
*#3282*727336*# Data Usage Status
*#*#8255#*#*- Show GTalk service monitor-great source of info
*#3214789# GCF Mode Status
*#0283# Audio Loopback Control
#7594# Remap Shutdown to End Call TSK
*#272886# Auto Answer Selection
****SYSTEM***
USE CAUTION
*#7780# Factory Reset
*2767*3855# Full Factory Reset
*#*#7780#*#* Factory data reset
*#745# RIL Dump Menu
*#746# Debug Dump Menu
*#9900# System Dump Mode
*#8736364# OTA Update Menu
*#2663# TSP / TSK firmware update
*#03# NAND Flash S/N
BAM!!!!
anybody has issues with some not working let me know maybe I mistyped
Also I plan on cleaning the list up and organizing the codes by what they do and I have a few more to add
kevhuff said:
Also I plan on cleaning the list up and organizing the codes by what they do
Click to expand...
Click to collapse
And podsibly add whether you can adjust the settings. Most of these codes lead to menus with the settings locked so users cannot change them.
Good Ref Stuck for now and slap thx to the OP vice posting it, Thank You and Good to Go!
Thanks Joe.....
And Thank you OP......good stuff....g
Nice!
Sent from my phablet.
*#0*# LCD TEST didn't see this one in the OP but it doesn't really do much from what I can tell.
I need a real Hard Reset! Please Help!
daswahnsinn said:
*#0*# LCD TEST didn't see this one in the OP but it doesn't really do much from what I can tell.
Click to expand...
Click to collapse
Please help I cant get any of the Factory reset codes to work it says Connection error? The reset codes work file on my note 1, I cant seem to find a way to get a complete factory reset. When I use the phones factory reset it dosent erase anything really, if you do a factory reset from the phones menu, you can check the phone with the "File Manager" app and in the apps menu prompt click storage analyses you can see all of your previously installed apps are still their! along with any pictures stored on the phone! I would love a truly clean wipe.
*#301279# HSDPA/HSUPA Control Menu---change HSDPA classes (opt. 1-5) just keeps loading maybe it only works on stock roms ,i dont know
evertime I tried using the phone this would come up , cure , fix permissions , back to normal!
*639# to check for upgrade eligibility.
Do these work in CM10 or is there an equivalent? Specifically I am trying to access the baseband selection "*#2263#" and I receive an error about being an invalid code. Thanks!
wifi power save mode?
Hi guys, Does anyone know the code that can disable wifi power save mode?
How can I get a work around for the s6 egde the mobile version to use thesearch codes. Since I upgraded to 5.1.1 the screen at the dialer doesn't respond to the codes.
Any ussd code for checking " Radiation levels" of the particular mobile phone?
Krishnamurthy
Please help
The tsp code won't work on my us cellular s7. My screen is lagging horribly and there are times I'm literally hitting a icon to get it to open for like 2-3 min. I have all kinds of applications opening up all the time on their own. My screen is freezing up and turning black as well. Please help me.
****Warning some of these codes can be harmful( wipe data and ect.) I am not responsible for anything you do to your device****
Some of these codes may lead you to a menu use the option key (far left soft key) to navigate
Some of the functions may be locked to our use but im still working on how to use these menus more extensively
Information
*#44336# Software Version Info
*#1234# View SW Version PDA, CSC, MODEM
*#12580*369# SW & HW Info
*#197328640# Service Mode
*#06# = IMEI Number.
*#1234# = Firmware Version.
*#2222# = H/W Version.
*#8999*8376263# = All Versions Together.
*#272*imei#* Product code
*#*#3264#*#*- RAM version
*#92782# = Phone Model
*#*#9999#*#*= Phone/pda/csc info
Testing
*#07# Test History
*#232339# WLAN Test Mode
*#232331# Bluetooth Test Mode
*#*#232331#*#*- Bluetooth test
*#0842# Vibration Motor Test Mode
*#0782# Real Time Clock Test
*#0228# ADC Reading
*#32489# (Ciphering Info)
*#232337# Bluetooth Address
*#0673# Audio Test Mode
*#0*# General Test Mode
*#3214789650# LBS Test Mode
*#0289# Melody Test Mode
*#0589# Light Sensor Test Mode
*#0588# Proximity Sensor Test Mode
*#7353# Quick Test Menu
*#8999*8378# = Test Menu.
*#*#0588#*#*- Proximity sensor test
*#*#2664#*#*- Touch screen test
*#*#0842#*#*- Vibration test*
Network
*7465625*638*# Configure Network Lock MCC/MNC
#7465625*638*# Insert Network Lock Keycode
*7465625*782*# Configure Network Lock NSP
#7465625*782*# Insert Partitial Network Lock Keycode
*7465625*77*# Insert Network Lock Keycode SP
#7465625*77*# Insert Operator Lock Keycode
*7465625*27*# Insert Network Lock Keycode NSP/CP
#7465625*27*# Insert Content Provider Keycode
*#7465625# View Phone Lock Status
*#232338# WLAN MAC Address
*#526# WLAN Engineering Mode -runs wlan tests (same as below)
*#528# WLAN Engineering Mode
*#2263# RF Band Selection-not sure about this one appears to be locked
*#301279# HSDPA/HSUPA Control Menu---change HSDPA classes (opt. 1-5)
Tools/Misc.
*#*#1111#*#*- Service Mode
#273283*255*663282*# Data Create SD Card
*#4777*8665# = GPSR Tool.
*#4238378# GCF Configuration
*#1575# GPS Control Menu
*#9090# Diagnostic Configuration
*#7284# USB I2C Mode Control—mount to usb for storage/modem
*#872564# USB Logging Control
*#9900# System dump mode- can dump logs for debugging
*#34971539# Camera Firmware Update
*#7412365# Camera Firmware Menu
*#273283*255*3282*# Data Create Menu- change sms, mms, voice, contact limits
*2767*4387264636# Sellout SMS / PCODE view
*#3282*727336*# Data Usage Status
*#*#8255#*#*- Show GTalk service monitor-great source of info
*#3214789# GCF Mode Status
*#0283# Audio Loopback Control
#7594# Remap Shutdown to End Call TSK
*#272886# Auto Answer Selection
****SYSTEM***
USE CAUTION
*#7780# Factory Reset
*2767*3855# Full Factory Reset
*#*#7780#*#* Factory data reset
*#745# RIL Dump Menu
*#746# Debug Dump Menu
*#9900# System Dump Mode
*#8736364# OTA Update Menu
*#2663# TSP / TSK firmware update
*#03# NAND Flash S/N
BAM!!!![/QUOTE]
Hi all i have problem with driver and monitor mode in balcktrack 5.I try to use airmon but it fail.Can sombody help!Here is log:
> [email protected]:~# airmon-ng
>
>
> Interface Chipset Driver
>
> eth0 Unknown Unknown (MONITOR MODE NOT SUPPORTED)
denis5j said:
Hi all i have problem with driver and monitor mode in balcktrack 5.I try to use airmon but it fail.Can sombody help!Here is log:
> [email protected]:~# airmon-ng
>
>
> Interface Chipset Driver
>
> eth0 Unknown Unknown (MONITOR MODE NOT SUPPORTED)
Click to expand...
Click to collapse
Just to says that this is an Android galaxy player forum not backtrack wifi cracking forum. You would have better luck to find help in a linux or backtrack forum.
EDIT: Try this one: http://www.backtrack-linux.org/forums/forum.php?
I'm pretty sure about this; I've read around and found that monitor mode, as said in your catlog, isn't supported. I could be wrong tho.
I tried to unlock my Galaxy Note and the code didn't work
So I contacted the unlock code provider and he sent me a set of instructions like this to do before entering the code:
a. Go to the Dial pad and dial *#197328640#
b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK
c. You will see 3 options
d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly
e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen
f. Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message
g. Restart the phone on the screen by holding the power button and click RESTART
h. When the phone prompts for the unlock code simply enter the unlock code
i. Your phone is now permanently unlocked!
But the trouble is I don't get [6] NETWORK LOCK inside Phone control. Also after dialing I dont get [1] UMTS instead I get [1] DEBUG SCREEN
Any help ?
I have tried following tricks:
- *#*#4636#*#* > Phone Info > Run ping test > Turn off Radio > LTE Only > Turn On Radio
- 3845#*855 > LTE-Only > Modem Settings > RAT Selection > GSM/WCDMA/LTE auto
But no trick working.