So, disclaimer. I'm an idiot today. Don't mind me.
So today I decided to go to jt's CM7 from ComRom 2.1 (non gingerbread)
Backed up everything, made a nandroid, wiped everything installed cwm 3.x.
Went and started to flash CM7. That didn't exactly like me too much as it went into a 45min long bootloop saying that it failed. No big deal. Nows the fun part. Rewiped everything, started to reinstall the ComRom. That didnt like me either, it says that it cannot mount Cache/recovery/log etc. So I thought. Okay, well I can always ODIN!
Ideas folks?
Thanks in advance.
Sorry about the bump/post, forgot to edit this one instead.
OK! Ignore above, used odin so now im on stock eb01 but still when i use odin to flash cwm 3.0.2.8x it still says it cannot open or mount cache/recovery/log and recovery/last_log.
At this point, I just want to get it so I can nandroid back to where i was on comrom.
Ideas?
What I did, ODIN the atlas2.2 and ebo1 Froyo package, boots up to stock fine no problem.
Attempted to flash CWM 3.0 in ODIN. flashes fine.
3 finger salute. doesnt boot, have to hold it for about a second then cwm just pops up saying it cant mount recovery.
Then I re ODINd eb01, deleted all voodoo, cwm, update.zip etc from sdcard.
re tried to flash cwm 3.0
same thing.
Completely lost haha
New ; odin's dl09, OTA'd up to current. What steps should I take next given my issues with CWM?
By deleting the file named clockworkmod on your sd card, you most likely deleted all of your nandroid backups. unless you backed up you sd card to your computer, im pretty sure they are gone. Im sorry. As far as the rest of your problems... I know a stock kernal will overwrite clockworkmod every reboot.
schu9120 said:
By deleting the file named clockworkmod on your sd card, you most likely deleted all of your nandroid backups. unless you backed up you sd card to your computer, im pretty sure they are gone. Im sorry. As far as the rest of your problems... I know a stock kernal will overwrite clockworkmod every reboot.
Click to expand...
Click to collapse
I did back up everything, made sure of that haha. So I should try reflashing a kernal? or would that have been included in the ODIN package/ OTA updates I did?
Thanks
tkirane said:
I did back up everything, made sure of that haha. So I should try reflashing a kernal? or would that have been included in the ODIN package/ OTA updates I did?
Thanks
Click to expand...
Click to collapse
there may have been a kernel in the ota updates, the problem us you need a non stock kernel..stock ones over write recovery in every boot
My suggestion....
odin eb01 with the atlas 2.2pit and repartition checked.
Fully boot after eb01 flash
Odin cwr 3-30-all and immediately three finger boot into cwr....wipe everything
Flash cm7 build 7/4 completely reboot
Use the power menu to access recovery...this time it will be cwr 4.x.x.x flash the
Cm7 build your want with no wiping, thats what works for me
Sent from my SCH-I500 using XDA App
efan450 said:
there may have been a kernel in the ota updates, the problem us you need a non stock kernel..stock ones over write recovery in every boot
My suggestion....
odin eb01 with the atlas 2.2pit and repartition checked.
Fully boot after eb01 flash
Odin cwr 3-30-all and immediately three finger boot into cwr....wipe everything
Flash cm7 build 7/4 completely reboot
Use the power menu to access recovery...this time it will be cwr 4.x.x.x flash the
Cm7 build your want with no wiping, thats what works for me
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I believe I attempted that last night at home, I will definitely try again after I am out of work. Would you happen to have a link to download of cwr 3-30-all?
Also, would I be correct in the assumption that same steps would apply to ComRom installation.
Also too, I am currently on the ED04 non-rooted stock OTA. Do same rooting methods that I used way back on dl09 still apply?
Sorry for the multiple idiotic questions, just much different this time around do to the inability for CWM (either 2.5 or 3.0) to be able to locate/mount the cache/recovery/log.
Would that have to do with Root? thats my main concern is getting into CWM for it to say it cannot mount. After this point I have it reboot system and it does not boot up again. It boots into CWM immediately. So it is unable to bot back into the actual phone mode. So then I reflash dl09 or eb01 in ODIN and start over.
tkirane said:
I believe I attempted that last night at home, I will definitely try again after I am out of work. Would you happen to have a link to download of cwr 3-30-all?
Also, would I be correct in the assumption that same steps would apply to ComRom installation.
Also too, I am currently on the ED04 non-rooted stock OTA. Do same rooting methods that I used way back on dl09 still apply?
Sorry for the multiple idiotic questions, just much different this time around do to the inability for CWM (either 2.5 or 3.0) to be able to locate/mount the cache/recovery/log.
Would that have to do with Root? thats my main concern is getting into CWM for it to say it cannot mount. After this point I have it reboot system and it does not boot up again. It boots into CWM immediately. So it is unable to bot back into the actual phone mode. So then I reflash dl09 or eb01 in ODIN and start over.
Click to expand...
Click to collapse
rooting has no effect on wheather or not recovery (cwm) sticks, its the stock kernel that is overwriting it as soon as you boot. com rom 2.0 comes with a kernel in the flash so if you do this exactly you'll be on comrom rooted with recovery
The steps for going to com rom would be the same this method may be overkill but it should get you cleared up....you said you odin'd ebo1 and the atlas pit before in your previous post,so im going to assume you know how to properly get into download mode and what do, and not do in odin, so down load cwr 3-30-fix all here, and save it on your pc in your odin folder
http://forum.xda-developers.com/attachment.php?attachmentid=556634&d=1301538947
download com rom (ukb) 2.0 either from your phone or from your pc, connect your usb cord and move it to the root of your sd card.(ie.not in a folder)
pull the battery,and odin the ebo1 tar with the atlas 2.2 with repartition checked, when its done insert batt and boot fully.
when done pull batt, odin cwr 3-30-fix all, when done insert batt and right away hold volume up, down, and power and continue to hold until your see the red cwr screen.
wipe data(factory reset)/wipe cache/go to advanced and wipe dalvik
go to install zip from sd, and find the comrom ukb zip and select install...when its done select reboot and done...at this point your phone will look like its not doing anything and its important to be patient you will hear the voodoo lady talking to you and this is good, when your phone fully boots hit the power button and select recovery and at the recovery screen go to backup and restore and select nandroid backup and run it, when its done reboot and enjoy
if you want to go to ukb 2.1 just download the patch, boot into recovery and flash, no wipe needed.
as a side note the 3-30 file you odined will not be your recovery after this is complete because comrom comes with its own recovery, after you get on to this rom the recovery that came with it will be the one you see.
i used these same steps to go to cm7 but i have only had success by, odin cwr 3-30 fix all, wipe everything and then install build date 7/4 and reboot completely, and power menu to recovery and flash the 7/13 build.
efan450 said:
rooting has no effect on wheather or not recovery (cwm) sticks, its the stock kernel that is overwriting it as soon as you boot. com rom 2.0 comes with a kernel in the flash so if you do this exactly you'll be on comrom rooted with recovery
The steps for going to com rom would be the same this method may be overkill but it should get you cleared up....you said you odin'd ebo1 and the atlas pit before in your previous post,so im going to assume you know how to properly get into download mode and what do, and not do in odin, so down load cwr 3-30-fix all here, and save it on your pc in your odin folder
http://forum.xda-developers.com/attachment.php?attachmentid=556634&d=1301538947
download com rom (ukb) 2.0 either from your phone or from your pc, connect your usb cord and move it to the root of your sd card.(ie.not in a folder)
pull the battery,and odin the ebo1 tar with the atlas 2.2 with repartition checked, when its done insert batt and boot fully.
when done pull batt, odin cwr 3-30-fix all, when done insert batt and right away hold volume up, down, and power and continue to hold until your see the red cwr screen.
wipe data(factory reset)/wipe cache/go to advanced and wipe dalvik
go to install zip from sd, and find the comrom ukb zip and select install...when its done select reboot and done...at this point your phone will look like its not doing anything and its important to be patient you will hear the voodoo lady talking to you and this is good, when your phone fully boots hit the power button and select recovery and at the recovery screen go to backup and restore and select nandroid backup and run it, when its done reboot and enjoy
if you want to go to ukb 2.1 just download the patch, boot into recovery and flash, no wipe needed.
as a side note the 3-30 file you odined will not be your recovery after this is complete because comrom comes with its own recovery, after you get on to this rom the recovery that came with it will be the one you see.
i used these same steps to go to cm7 but i have only had success by, odin cwr 3-30 fix all, wipe everything and then install build date 7/4 and reboot completely, and power menu to recovery and flash the 7/13 build.
Click to expand...
Click to collapse
I definitely know my way around odin and recovery haha thank you very much for the help. I'll try it out once I am out of work and let you know how it goes. I was doing just that only with cwr 3.0 not the fix all. so hopefully that does the trick. Hopefully I wont be seeing and mount cache errors.
So I did use the recovery-all last night to no avail, still says that it cannot mount certain items.
I have to three finger salute it, then let go after a while for it to boot to CWM, then it cannot mount cache:recovery/command and recovery/log and dev/block/st111
Also when trying to wipe data it cannot mount datadata
Then I do reboot system now and it reboots to CWM with same errors.
EDIT : Found an ODIN for EC01 ComRom 2.0
Going to try that out and see what happens.
I'm an idiot. I realized I kept ODIN'ing pit with CWM, aka, BAD idea. All fixed and running.
Thanks everyone!
tkirane said:
I'm an idiot. I realized I kept ODIN'ing pit with CWM, aka, BAD idea. All fixed and running.
Thanks everyone!
Click to expand...
Click to collapse
Lol glad to hear your up and running...I've had my share of idiotic moments and lucky our phones are pretty brick proof...and now we can add to the list that using a pit file and trying to odin cwr while it won't allow your phone to work..... you can still recover even from this with out perma-bricking!
Sent from my SCH-I500 using XDA App
Related
Ok, so I'm kinda new to the whole rooting, recovery, etc, but after successfully rooting my phone last week, I felt like trying to do something simple like putting on Community Rom or a different boot-up animation. I followed this thread for Community Rom:
http://forum.xda-developers.com/showthread.php?t=1053567
Which then references other links to download the files necessary to flash the Community Rom to the Fascinate. Problem is, I cannot get 'Update.zip' from this link:
http://forum.xda-developers.com/showthread.php?t=1046855
The update.zip link goes to a 404 not found page, so I can't finish the rest of this.
What I have done so far is installed ODIN on my PC and flashed Clockworkmod, though its not the same one I see referenced on XDA....the filename is
"cwm-recovery-ALL-3-30-FIX". Would this make an difference at all? I got it on my phone and it works when I boot into recovery, but it gives the stock blue screen and not the CWM screen (which I understand should be red) and I guess this is because I don't have Update.zip or something, so I can't flash anything using CWM at the moment.
I did find an 'update.zip' file somewhere (I really don't remember where now), and I put this on the root of my sdcard, but when I go into record and select 'Apply sdcard/update.zip' it shows that it's trying to do something (a progress bar moves across the screen very quickly), but then I get a triangle with an exclamation mark inside and the Android underneath it and nothing else happens. I left it for at least 5 mins and still nothing happened. The only way I can get back to the phone normally is to pull the battery out, put it back in and reboot the phone from the stock recovery.
Can someone help me out? Do I have a crap 'Update.zip' file and if so where do I get a good one from?
My specs for my phone are:
Hardware ver. I500.04
Firmware ver. 2.2.1
Basband ver. S:i500.04 V.ED01
Kernal ver. 2.6.32.9
Build number: SCH-I500.ED01
Odin the CWM recovery, boot to recovery, flash CommROM. That's all you need to do
Sent from my SCH-I500 using XDA App
Ok, I guess I'm kinda confused now. I already have CWM on my phone. Are you saying that I should use Odin to put the version of CWM on from here and I won't need update.zip?
Update.zip is not needed, the cwm replaces the stock recovery in the phones flash memory
Sent from my SCH-I500 using XDA Premium App
You already have cwm on your phone and the recovery 3-30 file is fine, download comm rom and it put on the root of your phones sd card (ie.not in a folder)...if you download it right from your phone it will be in a file that your downloads will be in..most likely tapatalk download, download, or downloads... the point is you want to be able to find it easily.boot into recovery and
Do a factory data reset, also wipe cache, and go to advanced and wipe dalvik cache . After doing those three things locate the comm rom file and install..reboot and enjoy!
If you did odin recovery and then did not flash anything the stock kernel will re write recovery and you will have to re-odin recovery again...so if I were you I would....odin recovery...put the batt back in, three finger boot into cwm flash your rom and or kernel and done
Sent from my SCH-I500 using XDA App
efan450 said:
You already have cwm on your phone and the recovery 3-30 file is fine, download comm rom and it put on the root of your phones sd card (ie.not in a folder)...if you download it right from your phone it will be in a file that your downloads will be in..most likely tapatalk download, download, or downloads... the point is you want to be able to find it easily.boot into recovery and
Do a factory data reset, also wipe cache, and go to advanced and wipe dalvik cache . After doing those three things locate the comm rom file and install..reboot and enjoy!
If you did odin recovery and then did not flash anything the stock kernel will re write recovery and you will have to re-odin recovery again...so if I were you I would....odin recovery...put the batt back in, three finger boot into cwm flash your rom and or kernel and done
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Maybe that's what happened then, I used Odin to put CWM on, but didn't flash anything after that. I'll go ahead and try again and see what happens.
So, why does everyone say you need update.zip all the time after you Odin CWM on the phone?
toledospod said:
Maybe that's what happened then, I used Odin to put CWM on, but didn't flash anything after that. I'll go ahead and try again and see what happens.
So, why does everyone say you need update.zip all the time after you Odin CWM on the phone?
Click to expand...
Click to collapse
You use to have to use update.zip but that is not the case anymore...and since you didn't flash anything after recovery you will have to re-do it, so if u did not already download the com rom file you will have to boot up...download comm rom...(i recommend the one with the otb kernel because you can overclock and undervolt with the voltage control app), pull the batt, odin recovery...that 3-30 recovery file is what works for me, put the batt back in and boot directly into recovery at this point I would suggest going to backup and restore and doing a nandroid back up btw power button is accept and menu button is go back...this willsave your phone exactly like it is now just in case things get screwy you will have a point to go back to ( but do not try to restore that back up in the future with out first disabling the voo doo lag fix) after your nandroid is done ,wipe data/cache/dalvik, navigate to wherever your comm rom zip is...install reboot and done...this process will take a few minutes and it's important to be patient...if you are fully stock as if right now you will hear a robotic lady saying stuff as your phone boots up...this is all normal and what you want to hear..once it reboots you can start playing around and setting it up the way you like it
One more suggestion is to use titanium backup and back up all of your apps prior to flashing and after your flash just restore all the apps...not data..i also export all of my contacts to the sd card not g mail cause I've lost contacts before so I just export to sd..flash and import them..that's what works for me...good luck..happy flashing!
Sent from my SCH-I500 using XDA App
Thanks efan, that worked perfectly this time. I now have Comm Rom on my phone and like you said, didn't need update.zip at all.
Edited as I thought I was having problems after with Android Market, but its fine now.
Well, I was previously running Comm rom, and i decided to switch to CM7 7/13
This didn't go so well. I Odin'd DL09 with atlas and repartitioned then installed Cmw and still Status 7 when I try to install. Then I tried installing 7/4 and it would just say something like "Checking BML" Or something, i forgot... and it would just reboot into cwm. I was running JT's cwm fix, and i tried with cwm all... I don't know what to do. Now my fascinate won't install comm rom, and every rom install just leads up to booting up in cwm.. no samsung logo.. Help??
Edit: Phone is now in "Manual mode"
i guess samsung recovery? but it wont boot. It just reboots into the same recovery after i press "reboot system now"
please? :'(
Just do this
after fighting with my phone yesterday trying to get it running this is what i did
Step one may be unnecessary but this is what i did.
1) Odined ED01 image let it boot. then Odind CWM3 3 finger salute. Flashed CommRom 2.0 when that was done i booted into CWM and disabled the VooDoo rebooted when the conversion was done.... i did step 2
2) in the OP of cm7 flash or odin the cwm
then flash the 07/04...
once that is up use the shutdown menu to access the Orange [cwm 4.0] cwm.
if you do a three finger salute it takes you to the RED [CWM 3.0] cwm.
Then flash the updates.
And suspect there was an issue with the Voodoo even though it said it was disabled. Good Luck
xwhofarted said:
Just do this
after fighting with my phone yesterday trying to get it running this is what i did
Step one may be unnecessary but this is what i did.
1) Odined ED01 image let it boot. then Odind CWM3 3 finger salute. Flashed CommRom 2.0 when that was done i booted into CWM and disabled the VooDoo rebooted when the conversion was done.... i did step 2
2) in the OP of cm7 flash or odin the cwm
then flash the 07/04...
once that is up use the shutdown menu to access the Orange [cwm 4.0] cwm.
if you do a three finger salute it takes you to the RED [CWM 3.0] cwm.
Then flash the updates.
And suspect there was an issue with the Voodoo even though it said it was disabled. Good Luck
Click to expand...
Click to collapse
That's the thing... It wont boot to anything i install on it.. But it sure as hell boots to ANY cwm i install... and it also boots to normal recovery in the absence of a cwm....
Can you get back to stock using odin? If you can try flashing a custom kernel after you flash the cwm recovery.
Sent from my SCH-I500 using XDA App
garywojdan81 said:
Can you get back to stock using odin? If you can try flashing a custom kernel after you flash the cwm recovery.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I can flash the DL09 with odin... but ive been there... 20 times. I havent tried a kernel but it probably wouldnt work seeing as it only boots back into cwm. I'm desperate...
EDIT: flashed EB01 voodoo... still boots into CWM... omg.
jamespweb1503 said:
I can flash the DL09 with odin... but ive been there... 20 times. I havent tried a kernel but it probably wouldnt work seeing as it only boots back into cwm. I'm desperate...
EDIT: flashed EB01 voodoo... still boots into CWM... omg.
Click to expand...
Click to collapse
Have you tried flashing the official vzw eb01..(not dl09 and not eb01voodoo) file with pit and repartition checked? If not do that and let it boot completely. You need to do this to make sure your ext4 partition is formatted to remove voodoo.
After you odin official vzw eb01 with the pit file and repartition checked let it boot fully.then odin 3-30 recovery and immediately boot to cwr...if it boots up fully you will have to re odin recovery.
At this point wipe everything and flash com rom 2.0 that will give you root, recovery and the rom....from there you can go to com rom 2.1or whatever your want but your phone should be up and running
Sent from my SCH-I500 using XDA App
efan450 said:
Have you tried flashing the official vzw eb01..(not dl09 and not eb01voodoo) file with pit and repartition checked? If not do that and let it boot completely. You need to do this to make sure your ext4 partition is formatted to remove voodoo.
After you odin official vzw eb01 with the pit file and repartition checked let it boot fully.then odin 3-30 recovery and immediately boot to cwr...if it boots up fully you will have to re odin recovery.
At this point wipe everything and flash com rom 2.0 that will give you root, recovery and the rom....from there you can go to com rom 2.1or whatever your want but your phone should be up and running
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I love you <3
I was sent a Fascinate as a Droid Incredible replacement. I was able to root it without a hitch but now my CWM can't mount anything. Won't mount anything can't bring up any logs. I am using the CM7 Clockwork and my phone is now bricked and I'm tired of using Odin to restore it and root it again then flash CWM and CM7, I lose all my games and free apps which I have to download again.
What am I doing wrong?
Also, are you using atlas.pit when odining to stock? After doing what does the phone stop working entirely (IE does the phone boot up CM7 and then brick, or can it not load CM7 at all)? Can you run stock without your phone breaking?
skafan2 said:
Also, are you using atlas.pit when odining to stock? After doing what does the phone stop working entirely (IE does the phone boot up CM7 and then brick, or can it not load CM7 at all)? Can you run stock without your phone breaking?
Click to expand...
Click to collapse
Yeah. I can work on stock just great.
What is the best rooting method to use if I plan on using CM7?
What I do is use Super One Click to root (http://forum.xda-developers.com/showthread.php?t=803682), then flash the custom CM7 CWM, and then flash CM7 in the custom recovery after wiping data, cache, and dalvik.
Use the CM7 from here: http://forum.xda-developers.com/showthread.php?t=1190668
Do I use the recovery in that thread? I've been using that one as well. I will re download the rom then.
Yes. Here are the exact steps from that thread after rooting with SuperOneClick:
Start with a rooted device (do not ask us how to do this).
Flash ClockworkMod Recovery attached to this post.
Download and push the ROM zip file to the sdcard.
Reboot into recovery.
Do a Nandroid Backup!
Wipe Data! Seriously! Do it!
Install the ROM zip from sdcard
Install gapps package linked here (http://wiki.cyanogenmod.com/index.php?title=Latest_Version#Google_Apps)
Alright. Let me try that again now. I just put the Nightly #8 on my SDCARD
Flashed it through the recovery, it's at the Samsung logo now. I am going to leave it there for a bit and see if that changes.
Yeah. It's stuck at the logo. I reboot into recovery and I get the log errors. That's 6 Odin resets today.
Make sure you use atlas.pit when restoring to stock. If you are following those directions exactly, all I can say at this point is to try another ROM (maybe MIUI or OMGB) and see if that works, unless another poster wants to take a stab at this.
Yeah, I'm using the atlas 2.2.pit
I had it working yesterday but only if I flashed the rom using the orange recovery through ROM Manager. I might try that again.
Hyphnx said:
Alright. Let me try that again now. I just put the Nightly #8 on my SDCARD
Flashed it through the recovery, it's at the Samsung logo now. I am going to leave it there for a bit and see if that changes.
Click to expand...
Click to collapse
I think the nightly might be your problem?...my $.02...and there are a lot of extra steps but it works for me if I really can't get cm7 to load (I've done this more then once)
Odin eb01 with the atlas 2.2pit and reboot fully when odin is done.
Pull battery...Odin cwm 3/30 fix all..and when that's done, install battery and 3 finger salute into recovery....wipe everything and flash com rom 2.0 and reboot.
This is where you may have to try different recoveries, putting com rom on your phone gives you root, recovery and voodoo. So from here if your recovery doesn't properly flash cm7 you can simply pull the battery re odin a different recovery and try again, as long as you don't try to reboot the phone.
Make sure you are using the 7/17 build from, jt's pretty much official cm7 Thread, not the nightly. even if this is not what you want it should properly get you to mtd format, so another rom on an mtd build can just be flash the good old way.
I've had the cwm4.x.x.x work fine and then today it would not work after I flash a different kernel with out wiping anything...oops! I've had 3/30 fix all cwm give me the best results but even today would not work.
What did work was using the com rom recovery to flash times infinity's purple recovery zip...reboot recovery into the purple one, and then wipe everything and flash cm7 7/17...ugh finally! Once I was there just power button menu... reboot recovery to install gapps, and glitch. You could at this point wipe cache and dalvik and flash nightly if you wanted...hope some of this helps.
Sent from my SCH-I500 using XDA App
I've had the same problem tryin to flash all mtd based roms...it always sticks at the samsung logo when I three finger back to recovery. I get the error logs aswell...**** sucks lol. That's odining ed05, fully boot, odin cwm 4 fix for cm7, boot recovery, wipe data,cache, dalvick, install rom.zip, all for a samsung logo and log error lol. So instead of spending 5hrs trying to flash a rom, I spent 10min and flashed power wash ed05, works great!
used oden to flash CWM. now i cant boot into android, it just keeps kicking me into CWM recovery.
anyone see this? any suggestions? would a wipe fix it?
did you flash a rom if so which one?
no ROMs, simply just tried flashing CWM via Odin
may i ask why 2.3.5?
what were you trying to do?
i am still able to get into Download mode to flash files via Odin, so i dont think all is lost. but, still just stuck in recovery. when i try to reboot it just takes me right back into recovery. i may have flashed an incorrect version of CWM which could be the cause of this problem. if that was the case, any ideas as to how i can get back into a proper boot?
xwhofarted said:
may i ask why 2.3.5?
what were you trying to do?
Click to expand...
Click to collapse
I was trying to flash CWM so i could flash a custom ROM. Had this phone forever and was just looking to try out some ROMs out there.
As long as you odin cwm none of your os is really touched.
try the cwm 4 fixed for cm7. http://forum.xda-developers.com/atta...2&d=1311907538
Now when you reboot your device the stock kernel will over right the cwm.
also make sure you put the odin file in the PDA section.
So basically flash the new cwm and try booting into normal that should get you back where you started from. 100% stock.
that link didnt work. tried searching for the thread without any luck
for some reason it truncated the link with a '...' and it thinks that is part of the hyperlink
dl.dropbox.com/u/14764513/cwm4_fixed_for_cm7-ODIN.tar <- cwm 4 fixed for cm7
thanks.. so i flashed this via odin. same problem. i start the phone. the samsung logo comes up. it disappears for a second. then it comes back up and kicks me into recovery.
weird right? any suggestions
ok then what is your endgame?
Now before you said you flashed just the CWM, may i ask why...if you did not intend to flash a rom? were you going to flash a Kernel or obtain root?
Perhaps you should try this
Download this: http://forum.xda-developers.com/showthread.php?t=1278838
It is a custom kernel.
Now Flash CWM with odin
Put battery back in [dont touch power button yet]
Hold down BOTH volume and Power all at once * Dont let go until you see Samsung Logo.
[should still be plugged into pc via usb]
You will boot into CWM
using the volume up and down-Scroll down to Mounts and storage [select it by hitting the power button]
Then scroll to Mout USB storage
~now you should be able to see your SDCard as storage on your PC, put the Kernel some where on your SD Card~
[back on your phone Then Select Unmount
Scroll to ****Go bacK***** [select]
Scroll to install zip from sd card [select]
Select choose zip from sdcard
Navigate to where you have the zip
Select it
Scroll down to Yes-Flash........
Let the phone do its thing!
Good luck!
Your bootlooped...if you can get into cwm wipe all three and flash a rom thats compatible with the version of cwm you have installed. Or odin back to stock and start over...
droidstyle said:
Your bootlooped...if you can get into cwm wipe all three and flash a rom thats compatible with the version of cwm you have installed. Or odin back to stock and start over...
Click to expand...
Click to collapse
yea i started to figure that was the case. if i flash the full odin package for EH03 via odin and that will start me at the beginning?
thanks again for everyones help.
Yes,
Keep in mind all data will be gone [except on your sd card like photos and what not]
Good Luck!
xwhofarted said:
Yes,
Keep in mind all data will be gone [except on your sd card like photos and what not]
Good Luck!
Click to expand...
Click to collapse
yes i am aware. did however make a backup of my current setup. i am stuck in recovery, but recovery still works. so i was able to make a backup and hopefully i can restore at some point. also, i had been rooted earlier and immediately made a tb backup of my apps. all is not lost
thanks a bunch guys! happy holidays ill let you know if i succeed
This may sound dumb but
make sure you are NOT hitting "reboot recovery" and you ARE hitting "reboot system now"
xwhofarted said:
dl.dropbox.com/u/14764513/cwm4_fixed_for_cm7-ODIN.tar <- cwm 4 fixed for cm7
Click to expand...
Click to collapse
the link is broken can you re upload it ?
xwhofarted said:
As long as you odin cwm none of your os is really touched.
try the cwm 4 fixed for cm7. http://forum.xda-developers.com/atta...2&d=1311907538
Now when you reboot your device the stock kernel will over right the cwm.
also make sure you put the odin file in the PDA section.
So basically flash the new cwm and try booting into normal that should get you back where you started from. 100% stock.
Click to expand...
Click to collapse
that link is broken can you upload up the tar file
So my vibrant won't boot up. I've tried odining it back to stock, and no matter what I do, it will almost get to the galaxy S screen (freezes as it is forming the S). Download mode and recovery mode both work.
Pull the battery, boot into recovery and wipe factory reset, wipe cache, and advanced->wipe Dalvik. The reboot. Will take longer b/c it has to rebuild Dalvik but it should work out fine. I had the same thing happen the two nights ago coming off ICS.
Don't forger you won't have CWM and it isn't in the market for 2.1 anymore. You can download it from my signature. Put Update.zip in internal and hit reinstall packages twice (that is if you want flash or restore).
Are you able to "Reinstall Packages" from recovery or does that fail?
Did you check re-partition when converting to stock?
You may have corrupted your internal SD
Sk3tchy said:
Are you able to "Reinstall Packages" from recovery or does that fail?
Did you check re-partition when converting to stock?
You may have corrupted your internal SD
Click to expand...
Click to collapse
The reinstall packages fails. It says: "can't open /sdcard/update.zip" (no such file or directory).
Woodrube said:
Pull the battery, boot into recovery and wipe factory reset, wipe cache, and advanced->wipe Dalvik. The reboot. Will take longer b/c it has to rebuild Dalvik but it should work out fine. I had the same thing happen the two nights ago coming off ICS.
Don't forger you won't have CWM and it isn't in the market for 2.1 anymore. You can download it from my signature. Put Update.zip in internal and hit reinstall packages twice (that is if you want flash or restore).
Click to expand...
Click to collapse
I don't have the option of wiping the Dalvik in recovery. I think its because it went back to the default "Android system recovery <2e>"
I tried wiping everything, but when it boots, it goes to the vibrant screen, then to the tmobile screen (the boot sound works), but then, the screen turns black and it goes back to the vibrant screen again (and it just keeps looping).
Maybe try ka7 or kb5 instead of jfd? Investigate /mnt/efs and the copies in /sdcard/backup? Don't know much about eds, might be worth a look. Reflash SBL for good measure?
cashmundy said:
Maybe try ka7 or kb5 instead of jfd? Investigate /mnt/efs and the copies in /sdcard/backup? Don't know much about eds, might be worth a look. Reflash SBL for good measure?
Click to expand...
Click to collapse
So I flashed ka7, and it gets past the S logo now, but then it turns black and now it says "Kernel Panic" upload mode:
RST_STAT=0x4
PMIC_IRQ1=0x0
PMIC_IRQ2=0x0
PMIC_IRQ3=0x0
PMIC_IRQ4=0x0
PMIC_STATUS1=0x40
PMIC_STATUS2=0x2C
Go to the dev section and download the Toolbox. It is stickied. It has drivers, Odin and the Pit/Tar files to get you back to stock. Get back into download mode and re-run Odin with those files.
Don't forget that you don't have to see the DL mode on your screen as long as the COM box is yellow in Odin.
Also check out this thread.
Woodrube said:
Go to the dev section and download the Toolbox. It is stickied. It has drivers, Odin and the Pit/Tar files to get you back to stock. Get back into download mode and re-run Odin with those files.
Don't forget that you don't have to see the DL mode on your screen as long as the COM box is yellow in Odin.
Also check out this thread.
Click to expand...
Click to collapse
I tried using the toolbox and reflashing the stock rom, but it just gets to the t-mobile "stick together" screen, then screen turn black, then it goes to the battery charging screen.
If you're doing Odin right, with a good rom and pit file, and still have trouble, I guess you could flash the SBL. I had a rom flash (via zipfile) do something unknown which made it nearly impossible to get into download mode. Once I did, I flashed the SBL and I was fine. No idea what happened. I even had a nandroid backup, not a restore, hose my phone once. When the other Phone Gods turn against you, Odin is your friend.
cashmundy said:
If you're doing Odin right, with a good rom and pit file, and still have trouble, I guess you could flash the SBL. I had a rom flash (via zipfile) do something unknown which made it nearly impossible to get into download mode. Once I did, I flashed the SBL and I was fine. No idea what happened. I even had a nandroid backup, not a restore, hose my phone once. When the other Phone Gods turn against you, Odin is your friend.
Click to expand...
Click to collapse
But I can get into download mode. And which sbl should I flash?
Probably the closest-to-stock Froyo SBL you can find.
I'm using a GB SBL from this thread, and he has Froyo also:
http://forum.xda-developers.com/showthread.php?t=1117990
I got stuck in this loop a few months back flashing back to stock from CM7 when Odin froze.
I could get to Download Mode and Stock recovery but had the same error when attempting to "Reinstall Packages" from recovery. The internal SD partition had corrupted.
I flashed Eugene_2E_JK2_Froyo with Odin, which fixed the Internal SD.
If you follow the write up on unbricking when you have the little triangle and phone error on your screen it will get you out of this one.
Your bootloaders are not the issue here. 2e Recovery isn't seeing the Internal SD Card and that it what is causing the hangup on boot.
Yeah, probably just flashing a decent kernel would fix you up, but unless you can find an Odin kernel file, you need to do the whole rom.
BTW, with Linux, you can use
tar -tf <rom file> if you want to see what's in a rom.
You can download the Odin flashable Overstock Kernel which contains the red recovery and flash it. That would give you the ability to format the internal SD and then Mount it to your PC through recovery and copy a Rom over to flash.
Otherwise the Unbrickable Froyo I mentioned before will also work.
The only thing you can do when stuck in a boot-loop, if the previous suggestions don't work, is to just reflash it. You can flash back to stock easily using Heimdall One-Click. http://forum.xda-developers.com/showthread.php?t=1278683
We're missing some info here. What ROM were you using before you flashed back to stock? Did you use a pit file in addition to the pda file in ODIN?
If you were using an ICS (android 4.0.x), flashing back to stock and didn't use a stock pit in addition to stock pda, it would definetly be giving you problems. ICS uses a different partition scheme then does stock (which is on android 2.1). The pit file tells odin how to partition your phone.If you're flashing from Froyo, then this should not be relevant as it uses same partition scheme as stock.