Hello XDA,
I recently installed Bionix Nero Beta 2. When I saw Beta 3 had been released I downloaded it and tried booting into Clockwork recovery from the ROM manager app. For some reason when it reboots it appears to be quickly installing a package and then proceeding to boot into Samsung's recovery, not Clockwork.
It seems that the cryptic first screen is saying that it is restoring the default recovery, but I am unsure as it literally just flashes on the screen, from which point the phone reboots and goes into Samsungs recovery.
Any help would be greatly appreciated!
select reinstall packages and it'll take you to CWM
Awesome thank you it worked!
I have this problem also. When i reboot into recovery using rom man. it takes me to samsung recovery first. Then i have to reinstall the zip manually. I have to do this everytime i want to use clockwork recovery. It wont stay for some reason... any suggestions?
this seemed to start happening around the leaked roms.... not sure how that could have ANY affect, but a lot/most have this "issue" if you can call it that.
there is a fix for the recovery in the development section
Link? Or it never happened
The only way to fix this is by install one of eugines kernels with cw fix
Sent from my SGH-T959 using XDA App
I have successfully been able to root and install everything on my Mytouch4G just fine, however, when I tried to install my wife's Vibrant, I am stuck. Here is what I have done:
1) I rooted successfully using superoneclickv1.9.1
2) I installed ROM Manager and also downloaded the Auxora ROM to get ready to install
3) When I flash CWM recovery, it says current and latest recover is 2.5.1.2 (concern here that my mytouch says 3.0.2.4 - do different phones install differently with CWM?). When I look at all CWM recoveries I also notice there is two seemingly more current versions available 2.5.1.3 and 2.5.1.4. I have left it at .2 but wondering why all the versions.
4) When I reboot into recovery, I always get the stock recovery and have not been able to get CWM recovery so I am unable to flash my Auxora ROM. I ran update packages numerous times, and get a signature verification error. I have tried a recovery 3e patch that does not work either. I also gave a try at downloading and SDK, but received temp root errors (phone is already rooted).
After reading many posts, I cannot seem to get a direct answer on what I should do to get CWM to actually boot properly, so I can flash a ROM. Someone said to flash the stock JDK rom, but if I can't boot into recovery, how can I flash anything.
Any help would be greatly appreciated.
You need to get a program for your pc called odin to get back to stock. you can find that and instructions on how to use it if you search for the daily updated vibrant bible its GREAT
http://forum.xda-developers.com/showthread.php?t=849028
going to stock eclair heres a a great guide
So going back to stock eclair will then allow me to install CWM recovery then load roms?
Every once n a while I haft do the install packages thing twice before it gives me clockwork green
. Hope this helps.. o n btw u should look at some of the other roms in the bible before u try auxora
yes u should go back to stock eclair for every rom, in my opinion. Then after that do the 3 button combo and install packages and u will have to do it twice and then the green screen will kick in and ready to rock a new rom.
i hope this helps
What is your current firmware?
I see you posted over in the "NOOB GUIDE" thread, you should really try to root using the method posted there and not any one click root apps.
This should be the root method everyone uses:http://forum.xda-developers.com/showthread.php?t=723479
After root your phone recovery should be blue. Choose "reinstall packages" gives you green recovery(this may need to be repeated multiple times to work possibly including flashing CwMRecovery with ROM manager. I recently did it 5 times b4 i got green recovery)Once you access green recovery chose "apply sdcard:update.zip" go into advanced and choose "reboot recovery" This should give you red recovery. Do a nandroid backup and flash away. Good luck!
Another option you could do is to download SGS kernel flasher from the market and flash a voodoo injected kernel with that app. Then when you boot into recovery you will have red voodoo recovery and you can flash away.
Odin to stock the best way to flash a new rom
Sent from my SGH-T959 using XDA Premium App
jman531 said:
So going back to stock eclair will then allow me to install CWM recovery then load roms?
Click to expand...
Click to collapse
The stock 2.2 that Samsung distributed with their Kies tool has a recovery that checks signatures. Everything earlier does not check signatures. So either use something earlier to get CWM running, or use a ROM that doesn't have the stock 2.2 recovery in the first place, or mod your recovery using the method described in http://forum.xda-developers.com/showthread.php?t=833423
Using Odin to go back to stock Eclair between your flashes of modded roms has the benefit of taking care of this, and also can clear up left over bits and pieces that may interfere with the proper function of your new ROM.
ok, i followed the instructions and am back to eclair, however, whenever I install packages, it just reboots the phone, not even back into stock recovery. I use the 3 key method and get into recovery, run install packages, and the phone just boots back up...its like it isn't running the update.zip file...
UPD: When i load rom manager and try to reboot into recovery, it says the application superuser permissions has stopped unexpectedly and keeps force closing now....titanium backup wont run now either, my root permissions seem whacked after going back to eclair?
UPD2: I followed instructions to unroot and reroot here: http://forum.xda-developers.com/showthread.php?t=739300
It removed superuser, then added it back again, but I still get the unexpected error and it appears my root is not in place. I am back to eclair, and now need a certain way to get my root fixed, so I can try and flash CWM recovery. Without root working, it is not letting me. My wife hates me now for doing this to her phone, so those of you that are married, I would appreciate your assistance to get back on her good side...before Mother's day...please? =)
Ok, thanks for all the help, however, I am really back where I started. I can only get stock recovery, and for the life of me, cannot get CW recovery to load. I used ODIN to go back to eclair on the vibrant, have a good root on the phone now, and no matter how many times i reinstall packages i cannot get clockworkmod recovery to load, ever. Any more thoughts out there?
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
starkiller86 said:
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
Click to expand...
Click to collapse
thanks...It is rooted, but not sure about busybox...the stock recovery is 2e now since I went back to eclair, so not sure i should follow that link as it talks about modifying 3e and making it backwards compatable. I did use that process before I went back to eclair, and it didn't work for me. I have uninstalled rom manager, and reinstalled...and it is different in that it shows a flashed recovery 2.5.1.2, and never asks me for my phone type anymore...it used to ask me and i had to select vibrant....is the recovery supposed to be 2.5.1.2? when I show all recoveries it lists .1, .2, .3, .4 so wondering if I should use .3 or .4...why does it stay at .2?
starkiller86 said:
I had this trouble a few months back. Things to check before going into recovery:
You gotta have root access.
Make sure you have debugging on
Install busybox FIRST
Try uninstalling Rom manager and reinstalling the latest version.
apply the recovery for vibrant and let it boot into recovery.
When it boots into recovery Don't try to install packages yet. Just reboot.
Look here for the files:
http://forum.xda-developers.com/showthread.php?t=833423&highlight=3e+recovery
When it boots up push the update.zip to the sd card on the phone, not the external card.
Run the script and it should reboot back into recovery.
You should now be able to install packages.
This way has always worked for me.
Click to expand...
Click to collapse
OK>>> I GOT IT... Thanks to everyone who helped...Here is what was needed:
1) Install ODIN, install back to eclair
2) uninstall ROM Manager, reinstall
3) I needed to select the 2.5.1.2 recovery from the list again (this was important as it somehow knew of the previous load, but files were missing, or something was just wrong.) It finally loaded properly, and asked for phone type again, so selected vibrant
4) I rebooted into recovery, and instead of install packages, i rebooted once, as starkiller suggested
5) After reboot, went back into recovery from rom manager, and this time installed updates, and it showed that it replaced the recovery with CWM.
6) It rebooted into stock recovery however, so I once again selected install updates, and it went right into CWM recovery, and now I am flashing happy!!!
Thanks again everyone...this was soooooo different than my mytouch4g!
If you have the Kies update of Froyo, the 3e mod will sometimes not work. I've gotten to CWM though , but its best to downgrade then flash a ROM from there.
I just wanted to bump this thread because it really helped me.
I've messed around with numerous android phones, and I've never had thie issues I've had with this phone getting into recovery to flash ROMs
Thank you!
The CM7 on my Vibrant can't flash any ROMs... I tried to flash Google Apps about 4 times but it wouldn't install. I also tried with other mods for CM7 but it still didn't work.
My ClockworkMod Recovery is 2.X.X.X
Should I just reflash CM7?
I have the same exact problem. I think its because the Google Apps are for 2.3.3 and we are on 2.3.4 for the nightlies. I am also seeking a solution...
It is because you are on CWM 2.5, all the CM7 flashables are meant for CWM 3 and they cannot be flashed from CWM 2.5.
there may be an asseration error, cwr 2 can flash edify scripting, try turning off signature verification and the asseration check
What ali1276 said - You need CWM 3 not 2.xx
Open ROM manager (think you need premium?) and select "Flash ClockworkMod" then Vibrant MTD, then yes, and finally ClockworkMod 3.x
I had the same problem but the answer was much simpler.
I simply didn't flash from Rom manager. I shutdown the phone normally and entered recovery via three button recovery method and then flashed the GingerBread Gapps version (obviously download it to your sd first).
Worked fine from then on.
I installed the CM7 and lacking google app pack. Where can i download the google app pack
If you have ROM manager you can find it in the download ROM section.
Sent from my SGH-T959 using XDA App
I had to DL the gapps.zip from the web, then push to SD card and open from there.
Here is the file that worked for me:
I flashed JTs nightly CM7 build number 14 yesterday, first time flashing CM7 and so I am just wondering if I did something wrong because I cannot get the android market. I followed the steps in the wiki found here but when I flash the cm_fascinatemtd_full-14.zip it powers the phone on directly, as in I go straight to my home screen and I never have gotten to flash GAPPS. So I have tried rebooting into CWM and then flashing GAPPS, installing it from ROM Manager and also reflashing CM7 from ROM Manager now I know there is a method in ROM manager but I need ROM manager PRemium to download CM7 nightlies. Is the easiest way to get the market and all subsequent GAPPS by going back to stock (ODIN to DL09 to ED05) then rooting and then buying ROM manager or did I miss something?
I have also tried sideloading the market but it never opens up, it shows a white screen then jumps to the most recent thing I had open
You should have setup screen (google sign in with android logo) when booting from CWM after flashing CM7 and gapps.
I would flash CM7 and gapp on CWM not on rom manager.(Wiping data/dalvik/cache)
Once you sign in for google account, you will be asked what google apps must be installed, and then market will be opened for installing the selected one.
I don't know exactly why, but once I missed that sign in chance (just skip), I haven't had any second chance anymore for installing gapps although I reflashed it again. Same as you've seen.
Download this
http://www.mediafire.com/?67t2077vf4q3zd6
Boot into recovery via power button menu and select the gapps.zip and install and reboot
Sent from my SCH-I500 using XDA App
kproton said:
You should have setup screen (google sign in with android logo) when booting from CWM after flashing CM7 and gapps.
I would flash CM7 and gapp on CWM not on rom manager.(Wiping data/dalvik/cache)
Once you sign in for google account, you will be asked what google apps must be installed, and then market will be opened for installing the selected one.
I don't know exactly why, but once I missed that sign in chance (just skip), I haven't had any second chance anymore for installing gapps although I reflashed it again. Same as you've seen.
Click to expand...
Click to collapse
I am confused as to what your saying.
As to above I have done that and it doesn't work still, anyone else?
cking122 said:
I am confused as to what your saying.
As to above I have done that and it doesn't work still, anyone else?
Click to expand...
Click to collapse
Are you sure you are booting into CWM via the Power Menu in CM7 and NOT by the 3 finger method??
This is very important, in order to get to the "right" CWM... Remember, once you are on CM7 or Vanilla GB, ONLY use the Power Menu option to go to CWM. (Or you can use ADB Reboot recovery too.)
Are you flashing CM7 AFTER you flash gapps? You should only flash gapps after you flash cm7, not the other way around. I second Neozen on making sure you're using the 'good' cwm.
neozen21 said:
Are you sure you are booting into CWM via the Power Menu in CM7 and NOT by the 3 finger method??
This is very important, in order to get to the "right" CWM... Remember, once you are on CM7 or Vanilla GB, ONLY use the Power Menu option to go to CWM. (Or you can use ADB Reboot recovery too.)
Click to expand...
Click to collapse
Alright then, that worked. My apologies for misunderstanding you.thank you
please forgive me if this has been asked before. i've tried searching but can't seem to find any fix. my phone was working great but i wanted to try a new rom since i was getting bored. my mistake.. anyway i have CWM recovery on my atrix and it worked good. i've flashed roms before.i was flashing between Neutrino ROM V2.9 and V3 trying to see if i could get the CMsettings to work on V3 without crashing. anyway after a while i gave up and decided to full wipe and just flash V2.9. after the ROM flash i reboot the phone but got a boot loop so i pulled the batter and tried to boot into recovery to wipe and flash again but when i select Android Recovery it just hangs at a black screen. what happened? can it be fixed quickly because my battery before the final flash was about 30%
BTW.. i've tried to reflash the recovery through fastboot and my compute the way i did it when i fist unlocked my phone and flashed the recovery but still no luck... still hang at blank screen after selection Android Recovery
never mind i fixed the problem.... had to flashed a different recovery (in this case TWRP) and then flash back to CWM recovery. idk the reason why but it worked and now my phone is back on and just in time with only 5% battery life left after all the trial and error flashing..
ok i figured out what caused my recovery to crash in the first place. its the gapp addon. when i flash that zip and reboot i get a boot loop and my recovery is gone. first i though it was the zip file that was damaged so i re-downloaded the gapp addon from Neutrino ROM V2.9 fourm but now chrome says the zip is infected so ok i went and download the full gapp addon for CM7 rom and that flashes without crashing my recovery but when the phone restarts i can't access half the gapp like market and gmail and a few others. they show that they are installed in Manage Applications but they don't show up in the app drawer.. whats the problem now? i've never had this problem before