I attempted to flash a froyo bootloader via odin, said it failed.. now my phone is permanantly stuck on this screen that has a pic of a phone with a few dots leading to a computer and an ! between the two. I can't get it into download mode, I can't boot.. wtf did I do??? I followed the instructions to a friggin T!
oldfield16 said:
I attempted to flash a froyo bootloader via odin, said it failed.. now my phone is permanantly stuck on this screen that has a pic of a phone with a few dots leading to a computer and an ! between the two. I can't get it into download mode, I can't boot.. wtf did I do??? I followed the instructions to a friggin T!
Click to expand...
Click to collapse
odin back to stock
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
Or try that same method without holding the power button, just the volume rocker (up and down) when plugging into usb that works for some ppl
I frickin tried all that I still can't get outta that damn screen
And Odin won't see it, much less my whole damn computer
Edit: Still NOTHING. Am thoroghly convinced I did a hard brick some ****ing how and I'm about ready to shove this thing through a wall
try this. thats what worked for me
bfranklin1986 said:
try this. thats what worked for me
Click to expand...
Click to collapse
I'm not some friggin noob who doesn't use the search button, ok?? I've tried all this!
No your phone is not completely bricked. I rescued my phone many times from that screen. Connect your phone to another PC, install ODIN & samsung drivers. Make sure that the phone is recognized,
ON ODIN Select only the phone.
use any modem file using Phone
Click start that should bring your phone back to life.
Search for Eugene Froyo that does not brick and start from there.
chichu_9 said:
No your phone is not completely bricked. I rescued my phone many times from that screen. Connect your phone to another PC, install ODIN & samsung drivers. Make sure that the phone is recognized,
ON ODIN Select only the phone.
use any modem file using Phone
Click start that should bring your phone back to life.
Search for Eugene Froyo that does not brick and start from there.
Click to expand...
Click to collapse
I have TWO completely separate computers with samsung and odin drivers installed, BOTH of them yield the exact same result. The damn computer can't even recognize the phone!
oldfield16 said:
I'm not some friggin noob who doesn't use the search button, ok?? I've tried all this!
Click to expand...
Click to collapse
You need to relax for someone who is asking for help.
oldfield16 said:
I have TWO completely separate computers with samsung and odin drivers installed, BOTH of them yield the exact same result. The damn computer can't even recognize the phone!
Click to expand...
Click to collapse
Do you have a Jig?
If you do not, then spend the 5$ and get one. Its worth the money. Will get you into download mode in a jiffy.
chichu_9 said:
You need to relax for someone who is asking for help.
Click to expand...
Click to collapse
Sorry, just don't like being treated like some noob who doesn't use the search button/didn't already do some research in attempt to fix it themselves.
chichu_9 said:
Do you have a Jig?
If you do not, then spend the 5$ and get one. Its worth the money. Will get you into download mode in a jiffy.
Click to expand...
Click to collapse
If that's my only solution then I'm stuck using a mytouch until that comes......
oldfield16 said:
If that's my only solution then I'm stuck using a mytouch until that comes......
Click to expand...
Click to collapse
Team whiskey sells em, I got myn in 3 days.
chichu_9 said:
Team whiskey sells em, I got myn in 3 days.
Click to expand...
Click to collapse
Guess I really just don't get why it REFUSES to leave that screen. I myself have saved my phone from that screen a few times myself, now it just won't. No matter what I do it just sits there. Doesn't matter the button combo, doesn't matter when I pull the battery or plug in the USB, not a goddamn thing.. and of course I don't get paid til tomorrow so, I'll have to wait through the entire weekend plus however long it takes for it to arrive so.. if someone could please come up with a solution that makes it so I don't have to go back to my chinsey little mytouch for a full week let me know.
Appreciate the help, but this situation in general.. it's just bull****.
oldfield16 said:
Guess I really just don't get why it REFUSES to leave that screen. I myself have saved my phone from that screen a few times myself, now it just won't. No matter what I do it just sits there. Doesn't matter the button combo, doesn't matter when I pull the battery or plug in the USB, not a goddamn thing.. and of course I don't get paid til tomorrow so, I'll have to wait through the entire weekend plus however long it takes for it to arrive so.. if someone could please come up with a solution that makes it so I don't have to go back to my chinsey little mytouch for a full week let me know.
Appreciate the help, but this situation in general.. it's just bull****.
Click to expand...
Click to collapse
I am not sure, which froyo bootloader you tried to flash, but what you did is kill the three button combo on you phone.
If you were in Atlanta, I could have let you borrow my Jig. Sometimes these things are frustrating, but look at them as a learning. Next time you will know not to mess with bootloaders. FYI, you are still lucky than many, things could have been worse.
chichu_9 said:
I am not sure, which froyo bootloader you tried to flash, but what you did is kill the three button combo on you phone.
If you were in Atlanta, I could have let you borrow my Jig. Sometimes these things are frustrating, but look at them as a learning. Next time you will know not to mess with bootloaders. FYI, you are still lucky than many, things could have been worse.
Click to expand...
Click to collapse
All I was trying to do was odin to stock and flash the stock froyo bootloader so I could get CM7 working, like so many have done before me. Between all the other **** ups I've been making this last month, this one's kinda pushing me over the edge.
oldfield16 said:
Guess I really just don't get why it REFUSES to leave that screen. I myself have saved my phone from that screen a few times myself, now it just won't. No matter what I do it just sits there. Doesn't matter the button combo, doesn't matter when I pull the battery or plug in the USB, not a goddamn thing.. and of course I don't get paid til tomorrow so, I'll have to wait through the entire weekend plus however long it takes for it to arrive so.. if someone could please come up with a solution that makes it so I don't have to go back to my chinsey little mytouch for a full week let me know.
Appreciate the help, but this situation in general.. it's just bull****.
Click to expand...
Click to collapse
you could allways make your own
Rofl bro, exactly that happened to me... rxactly that the t roofl... heres how i fixed it:
First i tried normal download mode, that didnt work.. then i tried pulling out battery, plugging in, holding vol buttons and putting bbattery in... this worked
But then i stupidly.tried tto flash the froyo bootloaders again (from cm7)... same exact issie excrpt the solution didnt work this time... this time i had to make a jig...
Once your in download mode, odin with ABSOLUTELY NOTHING... meaning open odin, plug in dl mode, once recognized, click start.. no pit.or pda or modem or anything and dont touch the repartition or whatever bullets. This wworked for me, it just rebooted into cm7 immidietly
Then if you want froyo bootloaders, do a nandroid, odin to stock, flash em, flasg cm7 and restore the nnandroid.. good luck
Sent from a cell tower to the XDA server to you.
1) take your battery out
2)put your battery in
3)hold vol up and vol down
4)plug your usb cable
this should get u to download mode....
nomadrider123 said:
you could allways make your own
Click to expand...
Click to collapse
I decided to take advantage of someone who can get next day shipping for only $5 on amazon so I have a jig coming anyway.
Again, appreciate the methods people are posting, but I've tried em all. My only hope is a jig, and if not then.. well..idk honestly, buy a jtag box?
Related
I've flashed dozens of ROMS, Odined many times and have considered myself savy enough. . .until today.
I was dicking around with some stuff and soft bricked the phone.
I thought, no biggie.
I can't get into Download mode. Help me. The 3-button thing doesn't work. Neither does the holding the volume buttons in while plugging in USB. Each time power hits the phone that stupid symbol pops up.
Please help me out folks.
TheSVdeal said:
I've flashed dozens of ROMS, Odined many times and have considered myself savy enough. . .until today.
I was dicking around with some stuff and soft bricked the phone.
I thought, no biggie.
I can't get into Download mode. Help me. The 3-button thing doesn't work. Neither does the holding the volume buttons in while plugging in USB. Each time power hits the phone that stupid symbol pops up.
Please help me out folks.
Click to expand...
Click to collapse
if it's the PC ! Phone symbol, try using ODIN in that mode
birgertime said:
if it's the PC ! Phone symbol, try using ODIN in that mode
Click to expand...
Click to collapse
That''' only work if he flashed the updated SBL... but sear, look around, there are guides to get out of that screen. Or better yet, get Heimdall, there's a command to get you out of it.
**cough** wrong section ** cough**
Try pulling the battery for 30 seconds then try the volume buttons then USB again. Also reboot the pc before plugging the USB cable in. If that doesn't work you may also try that same approach with the battery out of the device. I'm assuming that you're talking about the stupid battery charging indicator is the thing that keeps popping up amirite?
yeah just flash over the pc symbol when it comes up after booting i was amazed i could do that lol
birgertime said:
if it's the PC ! Phone symbol, try using ODIN in that mode
Click to expand...
Click to collapse
Trying this now. I accidentally checked "re-partition". It says not to unplug it and "SET PARTITION". It's been like that for a while. When you re-partition does it take longer?
TheSVdeal said:
Trying this now. I accidentally checked "re-partition". It says not to unplug it and "SET PARTITION". It's been like that for a while. When you re-partition does it take longer?
Click to expand...
Click to collapse
not that long =/
krylon360 said:
That''' only work if he flashed the updated SBL... but sear, look around, there are guides to get out of that screen. Or better yet, get Heimdall, there's a command to get you out of it.
Click to expand...
Click to collapse
I thought that I did look around well but still stuck. What's the updated SBL and what's Heimdall?
TheSVdeal said:
I thought that I did look around well but still stuck. What's the updated SBL and what's Heimdall?
Click to expand...
Click to collapse
Heimdall I believe is linked to in the bible. As far as this situation, I was at a point a few days ago where I had no backlights and the screen wouldn't come on. Remove the SIM/sdcard/battery. Plug in the USB connector, hold both volume buttons, and re-insert the battery. This method has proven to work for me 99% of the time. Otherwise, you may need to buy a JIG that will pop you into Download Mode.
MStrawder said:
Heimdall I believe is linked to in the bible. As far as this situation, I was at a point a few days ago where I had no backlights and the screen wouldn't come on. Remove the SIM/sdcard/battery. Plug in the USB connector, hold both volume buttons, and re-insert the battery. This method has proven to work for me 99% of the time. Otherwise, you may need to buy a JIG that will pop you into Download Mode.
Click to expand...
Click to collapse
+1 on this method for download mode.
birgertime said:
not that long =/
Click to expand...
Click to collapse
LOL! I had the SIM in it so it wouldn't work. I popped the SIM out, and tried again. It worked and I didn't have to re-partition.
THANK YOU EVERYONE!
I know this was the wrong section to post but I knew it would get the fastest response. Don't hate me. I was panicking.
NOW HOW THE HELL DO I DELETE THIS THREAD?
TheSVdeal said:
LOL! I had the SIM in it so it wouldn't work. I popped the SIM out, and tried again. It worked and I didn't have to re-partition.
THANK YOU EVERYONE!
I know this was the wrong section to post but I knew it would get the fastest response. Don't hate me. I was panicking.
NOW HOW THE HELL DO I DELETE THIS THREAD?
Click to expand...
Click to collapse
mods will take care of it
Glad to see you're back up and running. We've all been there.
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
What were you flashing to stock from?
Can you enter download mode?
Sent from my GT-I9000 using Tapatalk
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
letor69 said:
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
Click to expand...
Click to collapse
Following these guide: http://forums.t-mobile.com/t5/Samsu...-upgrade-to-Android-2-2-Froyo-now/td-p/678871
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
No I can't enter Download mode. I have no power at all.
nomadrider123 said:
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Have you tried a simple
pull the battery
put the battery back after a few second
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
http://www.youtube.com/watch?v=E9LYLoK1Qog
http://www.youtube.com/watch?v=qNts11IBZ8Y
I click the power button nothing happens. I plug in the usb, nothing happens.
Timz917 said:
I click the power button nothing happens. I plug in the usb, nothing happens.
Click to expand...
Click to collapse
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
nomadrider123 said:
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
Click to expand...
Click to collapse
SAME AS ME heeeeeeelllpppp
not a single button is working, either JIG i have it, what can i do?
Sorry to disappoint you; it seems that you are out of luck. I was flashing my Vibrant in the similar situation like yours and my phone has never turned on again since then (6 weeks). I live in Thailand and have been searching both English and Thai version for a solution. None comes up so far. The only way the USB jig will help is your phone can be powered up. I have tried that myself. You can look for the confirmation elsewhere in this forum. Any way if you can find a diy solution, please let me know and I will post it here if I can find one myself. Thanks!
http://forum.xda-developers.com/showthread.php?t=848737
I am wait on this line here on your link.
More methods coming soon
do you have insurance with tmobile?
i bricked mine before i had a good understanding of the whole rom flashing concept and i could get a downloading screen but i didnt know what to do so they replaced it with no problem.
call and ask all they can do is say no.
nomadrider123 said:
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
HOW ABOIUT LEAVE PHONE CHARGING FOR 10 GO IN TO DARK ROOM SHUT OFF LIGHT PRESS POWER BUTTON AND SEE IF BACK LIGHT OF SCREEN LIGHTS UP, IF SO I TOLD YOU SO I HAD THE SAME BUT MY VIBRANT WORKS AGAIN UNLIKE YOURS p
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Your first option is out because I have tried that. The only option left is the second one. since I live in Thailand, I have to ship the phone to my friend in Los Angeles to have him replace it for me. It is costly, but at least I will get a phone to work.
It seems to me that this issue is a special case that doesn't happen very often. Only the chosen ones will get into trouble like this when making an error here and there while flashing rom.
I had an IPhone 3G before and, of course, I made mistakes while updating it with all kinds of firmware, but the hardware never fails on me no matter what I did.
Thanks all who try to help.
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
nomadrider123 said:
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
Click to expand...
Click to collapse
I'm not getting on your back, why is it you think so?
Most of the users as i've encountered don't have the sense to name their threads appropriately, the OP on this one specifically named it HARD BRICKED, so instead of telling him to do all these instructions, you could've asked 1 thing "when you plug your usb, or wall charger, does it show any lights? or Are there any symbols on the screen? any lights glowing?"
Those 2 questions could've saved him, and you time.
Trust me i'm a beginner as well, i just know how to get out of these because i've been with this problem a few times. Alot of people here know more than me, specifically s15.. idk his full name.
i flashed stock froyo and my phone will not turn on.
already tried the battery pull,combo buttons (download and recovery)
what happened: i flashed back to stock froyo and all loaded successfully with odin.
as it started to reboot the screen went blank.
any ideas?
HELP!!!!
Usb jig if u cant get into dl mode.
Sent from my SGH-T959 using XDA Premium App
Check what you odin'ed...see if it contained sbl.bin.
and what were you flashing from??
Try flashing stock eclair 2.1. And then upgrade your rom from there.
Sent from my SGH-T959 using XDA Premium App
THANKS for all of your suggestion. i tried all of the above an no luck.
So you've already tried the USB jig to access DL mode like @movieaddict suggested and still can't? Thats odd..... What kinda life are you getting out of the phone? Does it turn on at all? How about plugging the USB into the PC or a charger.... anything? spindles or the battery charging icon?
- If the phone is completely dead as in your getting NO life at all then it is in fact HARD BRICKED. I have heard about a JTAG fix for HARD BRICKED Vibrants and I assume its similar to the XBOX360 deal that most of us have probably done in the past, but I have not personally on the Vibrant. I know there is a youtube video/tutorial. Unfortunately thats pretty much all I know about that. I would suggest a google search or search the Q&A threads here for something like:
"Samsung, Vibrant, hard, bricked, jtag"
Good luck!
I would not recommend trying jtag yourself, as you have to rub away a section of the motherboard to access certain solder points and it requires a very expensive jtagging device. If it is truly bricked you can send it to these guys and they will jtag it and bring it back to life for you.
http://www.mobiletechvideos.com/blog/?page_id=778
Already have you on the right page there. It's the second one on that list.
I agree with the above post. Its probably not something everyone should attempt. Although I think most will realize that when you see all that is involved. Here is the thread that I first heard about it:
http://forum.xda-developers.com/showthread.php?p=13981538#post13981538
I'm sure if you PM @connexion2005 would be more than willing to help you out as well. Good luck!
smali26 said:
i flashed stock froyo and my phone will not turn on.
already tried the battery pull,combo buttons (download and recovery)
what happened: i flashed back to stock froyo and all loaded successfully with odin.
as it started to reboot the screen went blank.
any ideas?
HELP!!!!
Click to expand...
Click to collapse
So your phone isn't responding at all? Try holding power and volume +. You might get a screen with orange text on it. This worked for me.
From there you can get to download mode by plugging the phone in and using the three finger method.
kawika said:
so you've already tried the usb jig to access dl mode like @movieaddict suggested and still can't? Thats odd..... What kinda life are you getting out of the phone? Does it turn on at all? How about plugging the usb into the pc or a charger.... Anything? Spindles or the battery charging icon?
- if the phone is completely dead as in your getting no life at all then it is in fact hard bricked. I have heard about a jtag fix for hard bricked vibrants and i assume its similar to the xbox360 deal that most of us have probably done in the past, but i have not personally on the vibrant. I know there is a youtube video/tutorial. Unfortunately thats pretty much all i know about that. I would suggest a google search or search the q&a threads here for something like:
"samsung, vibrant, hard, bricked, jtag"
good luck!
Click to expand...
Click to collapse
no life at all. I have tried holding tHe button for 30 sec. Still not result. also tried the battery on another person vibrant and it worked.
smali26 said:
no life at all. I have tried holding tHe button for 30 sec. Still not result. also tried the battery on another person vibrant and it worked.
Click to expand...
Click to collapse
may i ask what did you flash and what rom was on your phone before. Knowing what was flashed and where you were coming from may probably help us better to understand what is happening.
try press volume down and up button hold it and plug data cable connected to ur computer. That will let u boot to download mode. Try and let me kw how it went.
Same thing happened to me, I was able to fix by the following post...
1. Start AIO toolbox
2. Power off the Phone.
3. Pull the Battery.
4. Plug USB cable into Phone.
5. Plug USB cable into PC.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
The idea is to get ODIN to see your phone again.
I've seen a section on how to use the jig device but I don't think its going to work. Heres the thing, my phone is completely dead, no "Vibrant" screen, no download in anyway possible, no charging screen. Is there hope? Please help me :'(
This happened to me once, I could not get it to respond in anyway what so ever.... after being pissed and leaving it alone for about 20 minutes I came back and tried this...
1. Open your phone and take our your sim card, battery and external sd if you have one
2. Plug in your usb cord
3. Hold volume up and down, DO NOT HOLD POWER only volume buttons
4. Place battery back in phone and watch for the screen to respond
5. Release Volume up and down buttons
This method got me in to download mode even though I tried it like 100 times, it was only until after I let me phone sit for a little bit did it respond. Even if you have already tried this.... try it again. I went thru the same thing.
Solissfiend said:
This happened to me once, I could not get it to respond in anyway what so ever.... after being pissed and leaving it alone for about 20 minutes I came back and tried this...
1. Open your phone and take our your sim card, battery and external sd if you have one
2. Plug in your usb cord
3. Hold volume up and down, DO NOT HOLD POWER only volume buttons
4. Place battery back in phone and watch for the screen to respond
5. Release Volume up and down buttons
This method got me in to download mode even though I tried it like 100 times, it was only until after I let me phone sit for a little bit did it respond. Even if you have already tried this.... try it again. I went thru the same thing.
Click to expand...
Click to collapse
I've tried that but I'll let the phone rest for awhile. It happened when I was updating to 2.2 from 2.1 using Kies, I wasn't rooted or anything and I had just formatted the phone prior to that.
Burner2K0 said:
I've tried that but I'll let the phone rest for awhile. It happened when I was updating to 2.2 from 2.1 using Kies, I wasn't rooted or anything and I had just formatted the phone prior to that.
Click to expand...
Click to collapse
Same thing happened to me. Did everything as written above. Nothing seemed to work. Then....I put the battery in, left it overnight to charge. Tried it all over again and... IT WORKED!!!!
Sent from my SGH-T959 using xda premium
Nthe jig woulda worked for all of you
Sent from a cell tower to the XDA server to you.
Please post these in the right section...
This being said just hold the volume up button and plug in the usb cord this should force download mode.
How to make a jig
Or Buy One Here
toryheal said:
Please post these in the right section...
This being said just hold the volume up button and plug in the usb cord this should force download mode.
How to make a jig
Or Buy One Here
Click to expand...
Click to collapse
Isn't this posted in the right section? I mean,it does regard flashing and using Odin...
toryheal said:
Please post these in the right section...
This being said just hold the volume up button and plug in the usb cord this should force download mode.
How to make a jig
Or Buy One Here
Click to expand...
Click to collapse
And no, holding vol-up and plugging in usb does nothing.
Burner2K0 said:
Isn't this posted in the right section? I mean,it does regard flashing and using Odin...
Click to expand...
Click to collapse
This is a question trying to be answered (so Q&A is proper place) this is a section for devs to post and support their work. this wasn't to flame rather to let one know
---------- Post added at 08:32 AM ---------- Previous post was at 08:30 AM ----------
Burner2K0 said:
And no, holding vol-up and plugging in usb does nothing.
Click to expand...
Click to collapse
Well then i suggest trying the one where you pull out the battery and try it that way or get down and dirty and make a jig or purchase one from the link i sent you.
toryheal said:
This is a question trying to be answered (so Q&A is proper place) this is a section for devs to post and support their work. this wasn't to flame rather to let one know
---------- Post added at 08:32 AM ---------- Previous post was at 08:30 AM ----------
Well then i suggest trying the one where you pull out the battery and try it that way or get down and dirty and make a jig or purchase one from the link i sent you.
Click to expand...
Click to collapse
None of the steps work. My best bet is to buy a jig, but if phone is fully bricked, will that even work at all?
Burner2K0 said:
None of the steps work. My best bet is to buy a jig, but if phone is fully bricked, will that even work at all?
Click to expand...
Click to collapse
brother it is a game of chance either you take a ten dollar lose or you take a 130 dollar lose choice is yours but the have been a many of times where the jig has saved my ass...
toryheal said:
brother it is a game of chance either you take a ten dollar lose or you take a 130 dollar lose choice is yours but the have been a many of times where the jig has saved my ass...
Click to expand...
Click to collapse
Lets just hope it works, first have to put money in my paypal account. Kind of ironic how I've flashing ROMs here and there for a good while and the day I decided to go from stock 2.1 to 2.2 using Kies, it bricks >_>
Burner2K0 said:
Lets just hope it works, first have to put money in my paypal account. Kind of ironic how I've flashing ROMs here and there for a good while and the day I decided to go from stock 2.1 to 2.2 using Kies, it bricks >_>
Click to expand...
Click to collapse
Yeah i am guessing kies may be the issue. I would suggest giving it a try and if that doesnt work mobiletech jtags now
You can contact connexion2005 he is the best.
sadly.. for every 1 post I read about someone bricking a phone while flashing custom ROM, I read 4 or 5 of people bricking w/Kies..
did you ever have any 2.3.x roms on your phone? bootloaders?
"Kies ate my phone" is still an excellent way to get a new phone regardless of the current warranty.
G1toVibrant said:
sadly.. for every 1 post I read about someone bricking a phone while flashing custom ROM, I read 4 or 5 of people bricking w/Kies..
did you ever have any 2.3.x roms on your phone? bootloaders?
Click to expand...
Click to collapse
Yes I have, I had GB bootloaders on the phone but never switched them back to Froyos BL even when I flashed 2.2 ROMS, could that have been the problem?
Burner2K0 said:
Yes I have, I had GB bootloaders on the phone but never switched them back to Froyos BL even when I flashed 2.2 ROMS, could that have been the problem?
Click to expand...
Click to collapse
I know that you said you tried odin.... have you tried the One Click unbrick by Adam O and company? Sorry... that is heimdall to most... you can set it to load boot loaders for you, maybe this can help?
Hard Brick with Kies
Just wanted to say i did the same thing when i got my vibrant, i had busy box which i think was the reason kies failed on me.... but i called Samsung and they didn't even think twice about claiming warranty. They re flashed 2.2, and i bough the phone used of eBay, give them a shot.
cmzeunges said:
I know that you said you tried odin.... have you tried the One Click unbrick by Adam O and company? Sorry... that is heimdall to most... you can set it to load boot loaders for you, maybe this can help?
Click to expand...
Click to collapse
Judging by the thread, I doubt its going to work. It needs to atleast boot, which is what my phone isn't doing. Basically it acts as if there is no battery in, doesnt boot, no download mode, no charging screen. Computer wont pick it up either.
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
That's exactly what I would do
Sent from my SAMSUNG-SGH-I717 using XDA App
if you can get into download mode try reflashing the stock recovery found in the dev section then if you can get that fair try flashing the odin stock rom to see if it will boot
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
BLOWNCO said:
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
Click to expand...
Click to collapse
If jig won't work, I'm pretty sure hardware button won't work either. It goes without saying that he probably already tried everything he could find.
edpsx said:
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
Click to expand...
Click to collapse
That's not guinea pig. He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
foxbat121 said:
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
Click to expand...
Click to collapse
Yeah I thought about doing that - worst case scenario they tell me I voided my warranty and give me the phone back and I can still try finding a jtag solution or do i have to face any other consequences including maybe never getting my phone back?
foxbat121 said:
He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
Click to expand...
Click to collapse
That's my guess too. I screwed up badly. I would like to blame it on the late hour I did all that but it was just overexcited stupidity -_-
Try your buttons...
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
brojoe11 said:
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
Click to expand...
Click to collapse
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
cilmeron said:
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
Click to expand...
Click to collapse
I know on some phones that download mode can still be activated even if the screen isn't working properly and displaying it. I know many infuse users ran into problems and were still able to use Odin to flash stock and fix their phone. Try doing the hardware method of getting into download mode, and even though your screen doesn't show anything, it may still connect to Odin and you could try to flash back to stock.
Sent from my SGH-I997 using xda premium
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
mintu123 said:
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
Click to expand...
Click to collapse
Actually, you can brick it to the point of needing JTAG repairs to restore your device. That being said, it's very very very hard to brick it. You have to do something like flash firmware for a completely wrong device and screw up your bootloaders in the process.
cilmeron said:
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Click to expand...
Click to collapse
I've read some so my suggestion is this:
First make sure that you have the drivers installed for your phone. Then pull the battery wait for a few seconds. press the down button and then the power to go in download mode and hold them pressed for 20s. Now plug in the USB and press the volume up button. If Odin detects it you're good to go! If not... Well it's worth a shot
My theory is that even though the screen is blank, the hardware still boots properly. Just make sure your battery is somewhat charged. And also plug in the USB AFTER you "boot" in download mode.
Sent from my SGH-I717R using xda premium
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Click to expand...
Click to collapse
Everything here screams 'you should never attempt to modify your device again.'
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Why don't you find Adam_Outler in the hardware hacking forum? Send your phone to him and he'll hopefully be able to create an unbrickable mod. Not only will you likely have a fixed phone but it will mean volumes for our community.
Note, you will be without a phone for a bit
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
ekerbuddyeker said:
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
It's not that, we've all made mistakes, but it's like this guy went out of his way to try to brick the phone. This isn't like "oh crap, I flashed the wrong radio"
He tried to flash a ROM from a different SoC and every fail-safe wouldn't let him do it. I'm surprised at how well the different programs tried to save his phone, then he actually went ADB and forced it onto his phone and then he unplugs during a flash.
It's like he drove his car without paying attention and hit a fence that prevents you from flying off a cliff, then he kept ramming his car into the fence, then took some C4, blew up the fence, drove off the cliff, then started yelling "help, I fell off the cliff"
N3RD420 said:
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I'm confused, is there a CDMA Note? What do you mean "they won't know it's GSM"?