hi im sending my phone in for repair (dodgy usb charger connection) and i managed to flash the generic 2.1 ftf with flashtool, but the baseband is the old .46 will they be able to know what ive done? or is it all good to go, thanks in advance
andddy said:
hi im sending my phone in for repair (dodgy usb charger connection) and i managed to flash the generic 2.1 ftf with flashtool, but the baseband is the old .46 will they be able to know what ive done? or is it all good to go, thanks in advance
Click to expand...
Click to collapse
If you can, attach phone to pc and update using seus our pc companion, that will put you on the latest official version and they won't know a thing
Edit
Make sure you click factory reset and update
Sent from my X10i using XDA App
gregbradley said:
If you can, attach phone to pc and update using seus our pc companion, that will put you on the latest official version and they won't know a thing
Edit
Make site you click factory reset and update
Sent from my X10i using XDA App
Click to expand...
Click to collapse
wish i could but it not even charge at all now. so going to have to leave it, if they say anything il just act dumb and say iv never heard of the xda forum lol the phone will be totally dead so they wont be able 2 power it on so hopefully they will just change out the motherboard
lol, i once sent one with Wolfbreak's CM6 and they just reseted it via seus and repaired the phone
Related
Hello all
I have been playing around with custom roms and using generic basebands, but lately I need to get back to SE's carrier-specific 2.1 because I believe I have some local carrier settings that I need in order to properly send long sms and mmses. I've used SEUS successfully in the past to repair/reflash.
However after starting up SEUS for the first time in some time, it scans and checks my phone in flash mode and then tells me I have the latest software, but there is no repair button, only an 'exit' that when clicked closes SEUS. I recall vaguely that there used to be an option to repair or reflash? Can anyone help me by giving me some instructions as to how I can reflash using SEUS? Is there some button that I missed? Or is there no such option in the latest version of SEUS?
thanks very mch in advance!
PS I'm not using PC companion as every time I try to repair, after going into flash mode and it says it is 'downloading' the update, it always tells me that 'there is no software available for your phone right now' midway into the process.
Have u used flashtool before? U can use it to get back to 2.1. Its in the development section of the x10 forum. Its on page 1 or 2. Sorry i would post it but i am away from the computer. There is a howto guide by rendeiro2005 inside the flashtool link. Good luck. Will help u wen i get up in the morning lol
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
...Or, maybe you will find your operators' firmware here and follow the steps in the thread to flash it.
NB! Note that it is 1.6 firm, but after flash u can update to 2.1 in the normal way trough SEUS or PCC.
Yeah I used flashtool in place of seus for flashing eventually, but I need a carrier-specific fw.
Thanks G-face for the link but there isn't a Singapore one. Is there no way to reflash using SEUS now?
t3ej4y said:
Yeah I used flashtool in place of seus for flashing eventually, but I need a carrier-specific fw.
Thanks G-face for the link but there isn't a Singapore one. Is there no way to reflash using SEUS now?
Click to expand...
Click to collapse
Seus i believe will give u the latest firmware. It wont put u back at 1.6 if ur phone is already debranded. Sorry i cant help u. I didnt know ur carrier had its very specific firmware. If i come across the help u need i will post it.
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
what rom are you running on? i had exactly the same problem a couple of days ago with beta4 installed.
you need to get back to any 2.1 stock rom, then the SE update sw will let you repair your phone.
i had an old xrecovery-backup from the latest update to bb .54, i flashed that via xrec and then it was no problem to repair with pc companion...
I think you can search for the last files SEUS downloaded for you and then flash them back with flashtool, e.g. in my case SEUS downloaded 2 big files to C:\Program Files (x86)\Sony Ericsson\Update Service\db\13740270\blob_fs
One of them is ~150Mb and the other ~15Mb.
Then all you have to do is decrypt them with flashtool and create a bundle to be ready to go. I hope that works for you.
t3ej4y said:
Hello all
I have been playing around with custom roms and using generic basebands, but lately I need to get back to SE's carrier-specific 2.1 because I believe I have some local carrier settings that I need in order to properly send long sms and mmses. I've used SEUS successfully in the past to repair/reflash.
However after starting up SEUS for the first time in some time, it scans and checks my phone in flash mode and then tells me I have the latest software, but there is no repair button, only an 'exit' that when clicked closes SEUS. I recall vaguely that there used to be an option to repair or reflash? Can anyone help me by giving me some instructions as to how I can reflash using SEUS? Is there some button that I missed? Or is there no such option in the latest version of SEUS?
thanks very mch in advance!
PS I'm not using PC companion as every time I try to repair, after going into flash mode and it says it is 'downloading' the update, it always tells me that 'there is no software available for your phone right now' midway into the process.
Click to expand...
Click to collapse
I think I encountered this issue when I tried to play around with the SI number. I managed to get back to my original firmware when I changed my SI number to World Generic, then repair the firmware via SEUS then root and then change back the SI number to Singapore one.
Try this and let me know if it works for you.
prathaban said:
I think I encountered this issue when I tried to play around with the SI number. I managed to get back to my original firmware when I changed my SI number to World Generic, then repair the firmware via SEUS then root and then change back the SI number to Singapore one.
Try this and let me know if it works for you.
Click to expand...
Click to collapse
+1) use the app root explorer, set to R/W, and long press on build.prop file, and open in text editor. Then edit the CDA number from generic back to Singapore. It is repeated twice maybe three times. For example, the x10a global generic is 1234 - 4820, and to change back to X10a Brazil is 1234 - 4836. Save and close changes. Reboot phone.
Find the folder where you saved the Update Service on your pc. Go into the folder and delete the contents of "db" folder. This will wipe any data so Update Service will have to reread your device and download the appropriate firmware for repair software.
Turn off phone. Run SEUS. It Will say that you already have the latest software. REPAIR ANYWAY. DONE!
Below is the link to the thread with all the CDA numbers and detailed instructions.
http://forum.xda-developers.com/archive/index.php/t-824711.html
prathaban said:
I think I encountered this issue when I tried to play around with the SI number. I managed to get back to my original firmware when I changed my SI number to World Generic, then repair the firmware via SEUS then root and then change back the SI number to Singapore one.
Try this and let me know if it works for you.
Click to expand...
Click to collapse
I'll try that tomorrow, looks promising thanks!
agentJBM said:
+1) use the app root explorer, set to R/W, and long press on build.prop file, and open in text editor. Then edit the CDA number from generic back to Singapore. It is repeated twice maybe three times. For example, the x10a global generic is 1234 - 4820, and to change back to X10a Brazil is 1234 - 4836. Save and close changes. Reboot phone.
Find the folder where you saved the Update Service on your pc. Go into the folder and delete the contents of "db" folder. This will wipe any data so Update Service will have to reread your device and download the appropriate firmware for repair software.
Turn off phone. Run SEUS. It Will say that you already have the latest software. REPAIR ANYWAY. DONE!
Below is the link to the thread with all the CDA numbers and detailed instructions.
http://forum.xda-developers.com/archive/index.php/t-824711.html
Click to expand...
Click to collapse
I was just gonna ask for detailed instructions on how to do it thank you for the precise and detailed help! Will and post if it works
Hm I can't seem to find the SI or CDA numbers in my build.prop, can anyone help? I'm using tripnmiui ver 1.0.0 based on froyo 2.2.1, if it's any help
t3ej4y said:
Hm I can't seem to find the SI or CDA numbers in my build.prop, can anyone help? I'm using tripnmiui ver 1.0.0 based on froyo 2.2.1, if it's any help
Click to expand...
Click to collapse
Um, That's because your not running Sony Ericsson firmware anymore.
To get back to stock 2.1 either "repair software" via SEUS or PC Companion, or restore your xRecovery backup if you made one.
There doesn't seem to be a 'repair software' option for me in SEUS, after checking phone in flash mode the only thing I get is 'exit' :/
Ok, then use flash tool 0.2.9 and flash global generic firmwar. Both found here.
http://forum.xda-developers.com/showthread.php?t=920746
Then you can root with the flash tool, and then modify build.prop.
agenJBM...
my x10mini pro stuck at "SONY ERICSSON" logo' after i recovery and install for new ROM.
can i re.flash my phone with SEUS?
Thank's
ableh.X10black said:
agenJBM...
my x10mini pro stuck at "SONY ERICSSON" logo' after i recovery and install for new ROM.
can i re.flash my phone with SEUS?
Thank's
Click to expand...
Click to collapse
It's been a while for me, but repair software via SEUS should work.
My phone was running on 2.1 which was updated through SEUS. To get 2.2, I rooted my phone. Now my phone is back on 1.6 and is stuck there. I used Flashtool to go back to 2.1 so I can install xrecovery and eventually get to 2.2 but now its not working. I get Flash successful massage but when I check my phone it is still 1.6
I have tried 2-3 different Flash tools, 2-3 different ROMs for 2.1 but hasnt worked. I am stuck at 1.6 and only able to make calls and receive messages because after rooting even the GPRS is not working.
I will greatly appreciate some guru taking up my case.
You could give us some more information because there are parts that I seem to miss...
ysk79 said:
My phone was running on 2.1 which was updated through SEUS.
Click to expand...
Click to collapse
So, you updated your phone from 1.6 to 2.1 via SEUS.
ysk79 said:
To get 2.2, I rooted my phone. Now my phone is back on 1.6 and is stuck there.
Click to expand...
Click to collapse
How did this happen? Which rooting method did you use?
Only 2 work in 2.1 as far as I know: Flashtool and One-Click Root app.
Rooting doesn't change your firmware, it's just modifying some files to allow superuser access.
ysk79 said:
I used Flashtool to go back to 2.1 so I can install xrecovery and eventually get to 2.2 but now its not working. I get Flash successful massage but when I check my phone it is still 1.6
Click to expand...
Click to collapse
So, you flashed a 2.1 ROM again but now your phone doesn't work? And it's still on 1.6? Have you tried the Repair option on SEUS or PC Companion?
Ok, this has been happening to a lot of people lately.
Can someone smarter than me find out if SE followed through with their plans to stop rooted phones from using SEUS or PC Companion?
Unknown13x said that this was coming with the 2.3.3 Gingerbread update. He said we will have to be running unmodified stock firmware to be able to run update service.
I'm rooted and on custom ROM and yet PC Companion and SEUS both recognize my phone, I even repaired it with SEUS once to get back to stock.
What strikes me as weird in the OP is how did rooting sent him back to 1.6...
Must have chosen the wrong file to flash from SD to get back to 1.6
My_Immortal said:
I'm rooted and on custom ROM and yet PC Companion and SEUS both recognize my phone, I even repaired it with SEUS once to get back to stock.
What strikes me as weird in the OP is how did rooting sent him back to 1.6...
Click to expand...
Click to collapse
I guess that the OP got confused and used the 1.6 root method(The one that Bin4ry,jerpelea and biktor made). There was a step to downgrade to an older 1.6 firmware to make use of FOTA debug menu.
realunited123 said:
I guess that the OP got confused and used the 1.6 root method(The one that Bin4ry,jerpelea and biktor made). There was a step to downgrade to an older 1.6 firmware to make use of FOTA debug menu.
Click to expand...
Click to collapse
Ah, that would explain it!
Then an update with PC Companion should fix this, right?
My_Immortal said:
Ah, that would explain it!
Then an update with PC Companion should fix this, right?
Click to expand...
Click to collapse
Yes, unless SE have updated SEUS and PC companion to detect rooted/tampered phones. But flash tool should work all the time. Don't know why he is getting issues with it.
My_Immortal said:
I'm rooted and on custom ROM and yet PC Companion and SEUS both recognize my phone, I even repaired it with SEUS once to get back to stock.
What strikes me as weird in the OP is how did rooting sent him back to 1.6...
Click to expand...
Click to collapse
Have you done it recently on the updated SEUS? I am afraid to try. I have read a few others have come and gone with this problem. No matter what they do, the phone resets to 1.6.
agentJBM said:
Have you done it recently on the updated SEUS? I am afraid to try. I have read a few others have come and gone with this problem. No matter what they do, the phone resets to 1.6.
Click to expand...
Click to collapse
Really???
I did it a week or two ago, when I got in reboot loop trying to install the custom kernel and my recovery was broken. Flashtool didn't recognise my phone either,
so I used SEUS. Took me back to the latest 2.1 (2.1.B.0.1).
Maybe it has to do with regions, some may have not received 2.1 officially, so SEUS rolls the phone back to 1.6. Don't know... Now I'm afraid to use it again too!
agentJBM said:
Have you done it recently on the updated SEUS? I am afraid to try. I have read a few others have come and gone with this problem. No matter what they do, the phone resets to 1.6.
Click to expand...
Click to collapse
If you're in the US, shouldn't it take you to AT&T 2.1 release?
Thanks for the discussions but what should I do now? SEUS is not working for me...and flashtool gives me a thumbs up but whenever I check my phone, it is still on 1.6.. Let me know what you guys need to figure out how do I get out of this hole.
ysk79 said:
Thanks for the discussions but what should I do now? SEUS is not working for me...and flashtool gives me a thumbs up but whenever I check my phone, it is still on 1.6.. Let me know what you guys need to figure out how do I get out of this hole.
Click to expand...
Click to collapse
Which firmware are you flashing with FlashTool?
I have rooted my phone xrecovery installed but unfortunately unlocked the bootloader so SEUS support ended then and there. now here is the trick I DON"T KNOW IT WILL WORK OR NOT but in the /db/ folder we have three files which the update service used to flash our phone to the stock can we use the files with flashtool.
XGr7078 said:
I have rooted my phone xrecovery installed but unfortunately unlocked the bootloader so SEUS support ended then and there. now here is the trick I DON"T KNOW IT WILL WORK OR NOT but in the /db/ folder we have three files which the update service used to flash our phone to the stock can we use the files with flashtool.
Click to expand...
Click to collapse
SEUS still be able to restore your kernel and ROM to stock eventhough you already unlocked your bootloader...
StardustGeass said:
SEUS still be able to restore your kernel and ROM to stock eventhough you already unlocked your bootloader...
Click to expand...
Click to collapse
IF it can then why can't I do it with the pc companion as well as SEUS.
SEUS says latest version already installed and pc companion says There is no software available for your phone yet please try again later...........
XGr7078 said:
IF it can then why can't I do it with the pc companion as well as SEUS.
SEUS says latest version already installed and pc companion says There is no software available for your phone yet please try again later...........
Click to expand...
Click to collapse
Flash stock kernel.. Relock bootloader n then use SEUS.. It will work.. Use the repair option in SEUS.. Hope that helps..
Sent from my U20i using xda premium
XGr7078 said:
IF it can then why can't I do it with the pc companion as well as SEUS.
SEUS says latest version already installed and pc companion says There is no software available for your phone yet please try again later...........
Click to expand...
Click to collapse
Just press the repair option, it will send your mini back to stock ROM with 2.1 version.
EDIT: In SEUS, that is...
wrudwulf said:
Just press the repair option, it will send your mini back to stock ROM with 2.1 version.
EDIT: In SEUS, that is...
Click to expand...
Click to collapse
but there is no repair button on my SEUS v2.12.2.14 I am only getting these screens.
I just can't get back to stock.
Altough i have relocked my bootloader.
Hi, im here to ask you guys how do i unbrick my phone. it remain at the SE logo no lights and everything else, i use this flashtool and ask or perm root then it reboot and it stuck there, i remove the battery and still the same,please dont tell me i have to go repair it at the shop because i did that and it cost alot of $$$:crying::crying:
Try to use Sony Update Service to reflash Stock Rom again.
Sent from my SO-01C using xda premium
you mean the sony companion? if it is then i have no hope cause i cant connect to it
Do flashtool recognize ur phone? You should be able to flash a stock firmware again
GreenieDroid said:
you mean the sony companion? if it is then i have no hope cause i cant connect to it
Click to expand...
Click to collapse
No, I mean Sony Update Service...Or if you can boot in to Xrecovery, you can use a Flashtool to flash any Rom..
Hello,
today I wanted to restore a CWM restore on my neo V (.587), but i forgot that backup IS GINGERBREAD. Now the phone is softbricked. Flashtool is stuck at around 13% (system.sin) and SUS also cannot succesfully flash. I googled for solutions, but haven't found any. Alsom my bootloader is locked (unlockable). I tried flashing two different 587 FTFs, none flashed. Also, should i check or uncheck the final verification? Please help me! :crying:
After restoring the backup,of GB you can just flash a GB kernel ... This soft brick is caused as you had ics kernel on a GB Rom which won't boot!
Try flashing a GB kernel .... Instead of whole Rom ...
Sent from my MT11i using xda premium
Ghostfreak NB said:
After restoring the backup,of GB you can just flash a GB kernel ... This soft brick is caused as you had ics kernel on a GB Rom which won't boot!
Try flashing a GB kernel .... Instead of whole Rom ...
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I already half-flashed (stuck at ending flash session at 14%) ICS with flashtool so i,m afraid that won't help me.
By the way, will Sony repair it? How expensive will the repair be? :crying:
Re-Flash .587 fw using flashtool and flash stock ics kernel... Ull gt ur phone to boot... If u havent unlocked ur bootloader use pc companion and repair it
Press thanks if I helped
Sent from my MT11i using Tapatalk 2
Kecal79 said:
By the way, will Sony repair it? How expensive will the repair be? :crying:
Click to expand...
Click to collapse
It shouldn't cost you if you've warranty!
Sent from my MT11i using xda premium
was rooted, used flashtool on it. No more warranty.
Kecal79 said:
Also, should i check or uncheck the final verification? Please help me! :crying:
Click to expand...
Click to collapse
You should uncheck final verification..I know u've tried twice..but try again..nd use a diff usb port..
Kecal79 said:
was rooted, used flashtool on it. No more warranty.
Click to expand...
Click to collapse
Since they can't turn on phone in this condition, meaning first they need to flash it, root will be gone after that.
And you won't do anything stupid like telling them you used some unofficial program for flash, right? .
So there is no way they will know you root it and used flashtool.
And now about your problem. Are you using latest flashtool?
Can you show us log of flashing?
And what is exact problem when you try flashing it with sony update service?
Madfysh said:
Since they can't turn on phone in this condition, meaning first they need to flash it, root will be gone after that.
And you won't do anything stupid like telling them you used some unofficial program for flash, right? .
So there is no way they will know you root it and used flashtool.
And now about your problem. Are you using latest flashtool?
Can you show us log of flashing?
And what is exact problem when you try flashing it with sony update service?
Click to expand...
Click to collapse
Okay, will try to flash again. The log looks perfectly okay, as usual, but while flashing system.sin, it freezes for a few minutes (at 14%), and says Ending flash session and will stay at this message forever. I'm on Flashtool 0.9.8.0, and i guess i won't try to flash it again. I'm bringing it to a repair center (is that the right word? my english is not the best). And the phone CAN be turned on, but will only show the Sony screen and then the "orange triangle and a phone" screen. Guess they won't find out about the flashtool, I'll just say that I was updathing via SUS (in fact, it WAS the last thing i was doing with my phone ) and they'll hopefully fix it. Thanks for your help, next time I'll update my Flashtool.
If you haven't took your phone to a repair center yet, try this (i had the same problem):
Try reinstalling the drivers flash tool needs to recognize your phone.
If that didn't work, try another PC or another Windows. Sometimes the problem is pc, not the phone.
Sent from my Haida using Tapatalk 2
SIMMORSAL said:
If you haven't took your phone to a repair center yet, try this (i had the same problem):
Try reinstalling the drivers flash tool needs to recognize your phone.
If that didn't work, try another PC or another Windows. Sometimes the problem is pc, not the phone.
Sent from my Haida using Tapatalk 2
Click to expand...
Click to collapse
Tried two PCs, updated drivers a billion times. No luck. But the phone is already in a repair center. Thank you guys anyway.