For all those who are figuring out how to enable multitouch , now its simple...search market for "Defy Multitouch" else Check out Defy Multitouch Enabler on the Android Market! http://t.co/TR7qGcl
even you can select the number of touch you want..!! enjoy..
working on blur roms on 2.2 froyo, cm7, gingerbread leaks..!!
Thanks works like a charm
Works great on 2.3.4 only had to change my build.prop so it says MB525 instead of MB526 but it works now! Thx.
No go for me says "bootmenu not installed please install bootmenu" when i click load module, m running stock Froyo but rooted. DID a market search for bootmenu didn't show anything specific. Any ideas?
zannyuk said:
No go for me says "bootmenu not installed please install bootmenu" when i click load module, m running stock Froyo but rooted. DID a market search for bootmenu didn't show anything specific. Any ideas?
Click to expand...
Click to collapse
Search for "Defy 2nd Init" on market, install it, open it and install the boot menu ( 0.8.6 is ok ).
Thanks. How many points you recommend???
yesdalo said:
Thanks. How many points you recommend???
Click to expand...
Click to collapse
How many fingers do ya have..?>?>
Ok I downloaded and installed this thing. But can someone please tell me what does it.do?
Is there any app that uses this feature?
Interesting but.. what's the reason to do that?
Where this feature can be used, in a simple use of defy?
Well theres a multitouch enabled drumkit on the market
Nice App, but just a gimmick yet. There are not enough apps which use this.
thanks on CM7 rc 1,5 works like a charm
rachit2588 said:
For all those who are figuring out how to enable multitouch , now its simple...search market for "Defy Multitouch" else Check out Defy Multitouch Enabler on the Android Market! http://t.co/TR7qGcl
even you can select the number of touch you want..!! enjoy..
working on blur roms on 2.2 froyo, cm7, gingerbread leaks..!!
Click to expand...
Click to collapse
First of all you need to be rooted and second you need to install boot menu using 2nd init from market and then download and install Defy Multitouch Enabler from market
---------- Post added at 03:57 PM ---------- Previous post was at 03:51 PM ----------
falecomcyber said:
Interesting but.. what's the reason to do that?
Where this feature can be used, in a simple use of defy?
Click to expand...
Click to collapse
For example some games and emulators.
thanks works pretty good
well I have MIUI 1.9.9 running and also have installed 2nd init 0.8.6 but there seems to be a problem.
If I install 2nd init again and run multi touch enabler it works flawlessly, but when i restart the OS doesn't load and keeps showing me the bootmenu.
Then i just install the 1.9.9 from recovery again and then i can't use multi touch enabler and it wont install.
To make it work i have to repeat the whole process again. Not sure where I am going wrong .. hmm..
Nice. Thanks.
2 fingers it's sufficient
not when you are trying to play piano on your mobile .. you need atleast 3-4 enabled for it to work well
well, anyone can tell me the best number for Defy without force restart ?
Some say 10, some say 5.
I'm kinda confusing.
Related
For the record i dont make roms! I downloaded this rom from miui.com and added the english pack and the old market since the new market wouldnt download for me. I have been using it and so far only thing that doesnt work for me is the Theme Downloader. Try it out and let me know if it works for you. I have only tried it with Magldr but the rom comes with a SD rootfs.img too so it should work. Someone check the data i use a mifi for my mobile net so im not sure if it works or not. Enjoy
Data is confirmed working! This rom is Android 2.2.1 using warrens 2.6 kernel.
UPDATE - Ok i added an updated 1.2.19 version which fixes the force close when setting wallpapers and the new market is back and working. MIUI 1.2.25 has dropped now and 3dak has released an sd version already.
Updated DOWNLOAD
Thanks for posting... I'll check this build out tonight.
thanks for posting. testing now. Hopefully Data and Wifi working in this built.
waichai said:
thanks for posting. testing now. Hopefully Data and Wifi working in this built.
Click to expand...
Click to collapse
Confirmed, Data and Wifi is working.
ROM running fast, stable. Some errors such as not setup themes from the home screen (force close).
just use the theme manger i believe to setup wallpapers and themes. and i am glad to see data works in the build like i said i use a mifi for mobile net and i couldnt test.
I am current trying the 18-12 and 24-12 build, both work fine except the 24-12 build can't download app from market. I have tried all the method shared in forum and still the same. The GTalk is not ale to sign in too....
is this build having app not able to download from market issue?
yongck7 said:
I am current trying the 18-12 and 24-12 build, both work fine except the 24-12 build can't download app from market. I have tried all the method shared in forum and still the same. The GTalk is not ale to sign in too....
is this build having app not able to download from market issue?
Click to expand...
Click to collapse
this build can download from the market because i swapped the newer market out with the old market. and gtalk seems to work fine too.
i have had the phone unplugged for over 18 hours and i am at 5% battery left so the battery life is ok for anyone wondering.
nkognegr0 said:
this build can download from the market because i swapped the newer market out with the old market. and gtalk seems to work fine too.
i have had the phone unplugged for over 18 hours and i am at 5% battery left so the battery life is ok for anyone wondering.
Click to expand...
Click to collapse
Thanks. I will try it tonight and report back.
Could you please tell us what kind of Android this is? Froyo, Ginger? does it have Sense? What build is it?
I tried using Google translate on that site and the chineese-english translation is awful. Couldn't understand a thing.
Maybe display a changelog and snapshots
Can someone please add screenshots, would love to see this on the HD2
zarathustrax said:
Thanks for posting... I'll check this build out tonight.
Click to expand...
Click to collapse
Get it to Dual boot with WP7? Plox?
Seriously.
nkognegr0 said:
For the record i dont make roms! I downloaded this rom from miui.com and added the english pack and the old market since the new market wouldnt download for me. I have been using it and so far only thing that doesnt work for me is the Theme Downloader. Try it out and let me know if it works for you. I have only tried it with Magldr but the rom comes with a SD rootfs.img too so it should work. Someone check the data i use a mifi for my mobile net so im not sure if it works or not. Enjoy
Data is confirmed working! This rom is Android 2.2.1 using warrens 2.6 kernel.
DOWNLOAD
Click to expand...
Click to collapse
Hi nkognegr0, I used the sd rootfs.img and stuck at the boot screen. Please help.
bteljuice said:
Could you please tell us what kind of Android this is? Froyo, Ginger? does it have Sense? What build is it?
I tried using Google translate on that site and the chineese-english translation is awful. Couldn't understand a thing.
Maybe display a changelog and snapshots
Click to expand...
Click to collapse
It's a miui build... I believe miui still uses froyo base, but I could be wrong. And no sense... it's miui. That's the type of build it is.
GbrilliantQ said:
Get it to Dual boot with WP7? Plox?
Seriously.
Click to expand...
Click to collapse
I'm unpacking the build right now to test... if I need to edit it to boot with magldr, I'll post my edited files for everyone.
Almost perfect. 1-4 ma standby, perfect camera, perfect sound, fast and smooth. Only fc on wallpaper changing.
dadme said:
Almost perfect. 1-4 ma standby, perfect camera, perfect sound, fast and smooth. Only fc on wallpaper changing.
Click to expand...
Click to collapse
I added a new version that fixes the fc on the wallpapers and adds the new market. and since 1.2.25 is out now im gonna go test 3daks version see how that runs.
zarathustrax said:
I'm unpacking the build right now to test... if I need to edit it to boot with magldr, I'll post my edited files for everyone.
Click to expand...
Click to collapse
Outstanding. Thanks alot.
GbrilliantQ said:
Outstanding. Thanks alot.
Click to expand...
Click to collapse
There is already a folder with the file you need to boot with magldr included with the build, and it worked for me to boot with magldr.
Good build, haven't had any problems. Thanks to OP for posting. Great to see more miui sd builds being posted here with at xda.
I've got the classic robo voice in this one. Also one song has been playing since I got a vm and it's on repeat... lol
I even deleted the song, but it's still playing. I'll have to fix it when I get home from work.
Multitouch Development Thread
Thank does not just go to me but also to doixanh!! Please make sure to give him a thumbs up as well!!
We have managed to unload the kernel driver and patched a modded dual touch driver which can now be loaded.
Link
UPDATED Version
Requirements:
rooted device
latest Kernel and Baseband M76XX-TSNCJOLYM-53404015
Here are a few instructions:
Download attached zip file
unzip (before)
Place on your SD card
goto any shell
type: "insmod /sdcard/cy8ctma300_ser.ko"
you will have dual touch enabled now
after a reboot you will lose dual touch if you have any troubles
If you want it to work properly you will have to edit your hw_config.sh and copy cy8ctma300_ser.ko to /system/lib/modules/
add the two lines before any other insmod at the bottom of hw_config.sh:
"insmod /system/lib/modules/cy8ctma300_ser.ko"
"sleep 1"
Also edit your build.prop and add the lines below:
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
IF IT DOES NOT WORK AND YOU GET A FAILURE "file exists" WHILE INSMODDING PLEASE USE THIS FILE INSTEAD (SEEMS TO BE TWO DIFFERENT MINI PROS OUT THERE):
http://forum.xda-developers.com/showpost.php?p=13498769&postcount=56
MODULES
Module for Firmware 2.1.1.C.0.0
Module for Firmware 2.1.0.A.06
Module for Firmware 2.1.0.A.0.54
Bugs
no other bugs found so far
Sources are available here : Github
Please read instructions before you try!
Please comment here if you want to discuss
Reserved for future use...
THIS IS A DEV THREAD. DO NOT SPAM WITH UNCONTRIBUTED POSTS!
works only on Gallery 3d
not working on Google maps!
works on google maps too, i tried
Works really well, thank you!
Apps tested and working:
- Stock Browser
- Opera Mobile
- Multitouch Visualiser 2
- Fruit Ninja
- Stock Gallery
- Google Maps
- Launcher Pro
Didn't even notice any weird behavior so far.. Will keep you updated if anything goes wrong or doesn't work.
Edit: Orientation changing from landscape to portrait and back works just fine as well.
Can use terminal emulator?
Sent from my U20i using XDA App
updated instructions. I also made hotfix for MiniCM hybrid!
Nice one.... Hope the potrait bug can be resolved soon.. Works perfectly
Sent from my U20i using XDA App
you guys are genius i will try on owains CM6 final rom
i am unsure if the hotfix is compatible with owains rom as there are different hw_config.sh ?? please report back.
Works on stock 2.1 - sweet!
Got it working on test apps and Google Tracks - but not in normal Google Maps/Latitude.
However... it works in Angry Birds - at last we can zoom out!!!
teapea said:
Works on stock 2.1 - sweet!
Got it working on test apps and Google Tracks - but not in normal Google Maps/Latitude.
However... it works in Angry Birds - at last we can zoom out!!!
Click to expand...
Click to collapse
add to build.prop:
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
forgot to mention sorry
Didn't work on your mod "[ROM] Cyanogen Froyo - CM6 latest sources (Version 2.1) fast and stable"
Going now to update to miniCm hybrid
Tested on ur hybrid minicm... Reboot and the MT still kicking.... Yahoooo...
Best ever thing happen to this phone....
Slade and doixhan achieve where SE said impossible...
Sent from my U20i using XDA App
slade87 said:
i am unsure if the hotfix is compatible with owains rom as there are different hw_config.sh ?? please report back.
Click to expand...
Click to collapse
is working tested in multitouch visualizer 2. I was manualy add line insmod.....
i rebooted the pone and is still working
do i need to eddit build.prop beacuse i didnt addet those lines in?
realy u two guys are genius
sory for bad english
Eyama said:
is working tested in multitouch visualizer 2. I was manualy add line insmod.....
i rebooted the pone and is still working
do i need to eddit build.prop beacuse i didnt addet those lines in?
realy u two guys are genius
sory for bad english
Click to expand...
Click to collapse
if you want to use it in google apps yes.
slade87 said:
if you want to use it in google apps yes.
Click to expand...
Click to collapse
Working like a charm on any app thanks guys, and nice idea the build.prop thing
slade87 said:
if you want to use it in google apps yes.
Click to expand...
Click to collapse
well i try it in gallery, browser, game NOVA and is workig.
ok i will add those line that i wont have any problems lather
dual-touch works great while i play Pro Evolution Soccer 2011!
Greak Works!
Iskander.g said:
Didn't work on your mod "[ROM] Cyanogen Froyo - CM6 latest sources (Version 2.1) fast and stable"
Going now to update to miniCm hybrid
Click to expand...
Click to collapse
Yes, it is compatible i got it working, you doing something bad
Hey everybody, this is my Alien-theme-inspired modified Swype. I thought there would be some users here using Kenns Alien theme and would like to give their Swype keyboard some flashy Alien type look.
Swype (Beta) Version 3.25
Green
{qHD devices only!}
Cyan
-CyanogenMod<3-
Blue
-Check out AT(HONEYCOMB)RIX. Rom-
Red
-Take a look at the DarkSide. Rom-
This is fully themed for QWERTY only, both portrait and landscape. English/Spanish version only.
(Screen shot may be a bit greener/blue-er than it actually appears on screen)
[UPDATE: New Swype 3.25 no longer has green font color in the prediction bar, remains stock blue.]
If you have the stock version of Swype installed this will not work for you, Swype beta users only, otherwise the functionality will be limited.
Please follow this guide to get on the lastest Swype Beta and generate the proper licensing!
Before installing this apk please be sure to backup your current Swype app+data (TiBu)
1- go to the swype website, sign up for the beta. Save the email for the activation code.
2- download the swype installer. Install the installer and open it and let it install
The swype beta.
3- once its done. Back up with the new swype beta with titaniumbackup.
4- uninstall swype with titaniumbackup.
5- install themed swype... Should give you no trouble.
6- restore only the data from previous swype with titanium back up.
And then your all done!
If it fails to install, please report here... but this should work for anyone already running Swype Beta.
((Blue DONE and Red Finished... Requests??))
I hope you guys like this and it works for all of you.. Ill try to answer everybody that has questions or problems installing this.
Download Green Swype
http://goo.gl/0BbWa (Dropbox)
http://goo.gl/cfxhr (Multiupload)
Download Cyan Swype
http://goo.gl/fHLgN (Dropbox)
http://goo.gl/o40a5 (Multiupload)
Download Blue Swype
http://goo.gl/7QbQN (Dropbox)
http://goo.gl/pLKP8 (Multiupload)
Download Red Swype
http://goo.gl/1bf0c (Dropbox)
http://goo.gl/jWcGL (Multiupload)
Thanks to andy2na for HOW TO (Swype Beta post)
Big thanks to indieman91 for the step by step!
Really big thanks to djdarkknight96 for the update help
Please leave some feedback if you install/like my themes!
awesome! did you use any guides to learn how to theme it? i would love to make my own as well
looks great!! been wanting this forever..question though..can u do the same to the slideit kb? the 4.o version has themes..maybe they can be modded?
Im currently running alien and the swype already doesn't work but its there... what exactly are the steps to go about putting this on...?? I don't think I need to backup a non working swipe...
Sent from my Motorola Atrix
thanks, great idea and nice job.
personally i would like something a little less flashy though, but with a similar color scheme to what you've done. maybe the same font as the alien 3 stock keyboard. just an idea.
DrunkFuX666 said:
Im currently running alien and the swype already doesn't work but its there... what exactly are the steps to go about putting this on...?? I don't think I need to backup a non working swipe...
Sent from my Motorola Atrix
Click to expand...
Click to collapse
1. You need to follow the instructions in this thread to remove your existing swype version.
2. register on the website for the swype beta program
3. follow the instructions in point 1 link to install the beta installer
4. install this apk
5. run the installer and follow the prompts to license
license issue still
followed the instructions but still having license issue..how would i go about modding the apk?
How to get sywpe beta,
scorneil said:
1. You need to follow the instructions in this thread to remove your existing swype version.
2. register on the website for the swype beta program
3. follow the instructions in point 1 link to install the beta installer
4. install this apk
5. run the installer and follow the prompts to license
Click to expand...
Click to collapse
thanks for sharing the link. I guess i figured most people would have already been on the latest swype. did my apk work for you? did you try it?
it should install over your current swype, keeping license intact. But if not i figured uninstall your swype, install this apk, restore data after. please let me know if it worked out for you
rickriego said:
followed the instructions but still having license issue..how would i go about modding the apk?
Click to expand...
Click to collapse
you need to have swype beta properly installed, with a generated license and all. you must be a registered user in order to generate it with the installer. modding the apk wont help you since you stated above that your swype isnt working. so youre right backing up your non working swype wont help, need a working beta.
this link above shows exactly how to get it working.
Alright I got swype working... The beta one atleast... but its so damn small...!!! So now what to get this alien working... Just uninstall this apk and installs the green one...?? If its the same size I don't even think I should bother : s
Sent from my Motorola Atrix
DrunkFuX666 said:
Alright I got swype working... The beta one atleast... but its so damn small...!!! So now what to get this alien working... Just uninstall this apk and installs the green one...?? If its the same size I don't even think I should bother : s
Sent from my Motorola Atrix
Click to expand...
Click to collapse
you got the latest beta working? you sure you generated the license and all? if so you try installing this apk over your current swype, it should work. if not youll have to backup your current swype, uninstall, then install this one and restore data.
hmmm but swype usually isnt small it should take up like 35-40% of screen space, hope it recognized it as a qHD device. OR maybe you just like gigantic keyboards
jzaslice said:
you need to have swype beta properly installed, with a generated license and all. you must be a registered user in order to generate it with the installer. modding the apk wont help you since you stated above that your swype isnt working. so youre right backing up your non working swype wont help, need a working beta.
this link above shows exactly how to get it working.
Click to expand...
Click to collapse
sry.. no i HAVE the regular beta running fine, licensed and all. jut cant get the green themed one running..
Thank you dude!
Sent from my MB860 using XDA App
I'm going to look into changing the trace color for you
Sent from my MB860 using XDA App
indieman91 said:
I'm going to look into changing the trace color for you
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
dude that would be great, i know previous versions you hex edit the libswypecore file but didnt see anyone with a working solution to change v.3.x traces.
jzaslice said:
you got the latest beta working? you sure you generated the license and all? if so you try installing this apk over your current swype, it should work. if not youll have to backup your current swype, uninstall, then install this one and restore data.
hmmm but swype usually isnt small it should take up like 35-40% of screen space, hope it recognized it as a qHD device. OR maybe you just like gigantic keyboards
Click to expand...
Click to collapse
Haha... Maybe... my favorite keyboard to date is the windows 7 keyboard... Sooooo sexy... And the touch tones are awesome... That dubbed out sound... Amazing...!!!
And yes got the beta working properly now... Look has improved alot... But keys too tiny I feel...and the predictive level I used to get on my sgs swype...
So your saying use titanium backup and back this up then uninstall... Then instal your version and restore app data only from titanium...??
Sent from my Motorola Atrix
DrunkFuX666 said:
Haha... Maybe... my favorite keyboard to date is the windows 7 keyboard... Sooooo sexy... And the touch tones are awesome... That dubbed out sound... Amazing...!!!
And yes got the beta working properly now... Look has improved alot... But keys too tiny I feel...and the predictive level I used to get on my sgs swype...
So your saying use titanium backup and back this up then uninstall... Then instal your version and restore app data only from titanium...??
Sent from my Motorola Atrix
Click to expand...
Click to collapse
just back up and try installing over it first. that should work, just so you dont have to hassle with the rest. BUT yes if you try installing the greenswype.apk and it fails then go ahead and uninstall and try from there...restore data only if it installs correctly..i really hope this works for all of you.
SORRY IF YOU RAN THE INSTALLER YOU NOW HAVE A NEWER VERSION my apk will not work. im working on a theme for newest Swype. dont know why i let that one pass me by. my apologies.
jzaslice said:
dude that would be great, i know previous versions you hex edit the libswypecore file but didnt see anyone with a working solution to change v.3.x traces.
Click to expand...
Click to collapse
Oh crap... That's what I was thinking of doing but this a newer version... Its all different... My bad!
Sent from my MB860 using XDA App
indieman91 said:
Oh crap... That's what I was thinking of doing but this a newer version... Its all different... My bad!
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
haha yeah they changed it for some reason. hey can you post that you installed my greenswype.apk successfully and how you did it? so i could help other users. the only phone i tested it was on mine so the more successful results the better i could help others!
Sorry guys...new version
I kept saying latest Swype beta but theres a newer one out that most likely most of you are on. so if you ran the swype installer and are now on Version 3.6.84.26668, I will have that one themed in just a little bit.
For those of you who still use 2.1 eclair, but try to add a better looking face:
- agile lock - free - on the market: https://market.android.com/details?id=com.nanoha.SenseScreen&feature=search_result
- Xperia Active Launcher : working on stock, I am using it from 3 days already, no FC, taken from here: http://forum.xda-developers.com/showthread.php?t=1187008 - post 30
Then, if you have cypress chip (but also Dx module for synaptics) - if you need dual touch module "ax8mt" by ANDyX, you may need this toolbox (by puppet13th) to install hassle free ( and also the other goodies: CWM, dual recovery, etc.) : http://forum.xda-developers.com/showthread.php?t=1117100
Reasons : If you use your device as a PHONE, as primary function, you might think twice on installing any ROM....but this does not mean it HAS to look ugly (especially teh lockscreen of 2.1.)...decision is yours.
Hope this is usefull,
Cheers,
I get FC when trying to use Active Launcher on 2.1update1..
"Sorry! The application Xperia Active (process com.sonyericsson.home) has stopped unexpectedly. Please try again. "
terracuk said:
I get FC when trying to use Active Launcher on 2.1update1..
"Sorry! The application Xperia Active (process com.sonyericsson.home) has stopped unexpectedly. Please try again. "
Click to expand...
Click to collapse
xperia active launcher work on ly on FroyoBreadV23 and on all CM7(2.3.*)
tony-noob said:
xperia active launcher work on ly on FroyoBreadV23 and on all CM7(2.3.*)
Click to expand...
Click to collapse
That one was version 20, I believe. Trust me, on my 2.1. works this version. Rooted, JIT enabled, ax8mt module installed with the x8toolbox by puppet13-th. Donno if JIT has anything to do with it, or maybe Busybox? Thing is, it works.
elderduke said:
That one was version 20, I believe. Trust me, on my 2.1. works this version. Rooted, JIT enabled, ax8mt module installed with the x8toolbox by puppet13-th. Donno if JIT has anything to do with it, or maybe Busybox? Thing is, it works.
Click to expand...
Click to collapse
I'm rooted with Busybox installed.. Just checked and it's busybox V1.15.3, maybe old version??
I dont have JIT installed or ax8mt. Might try updating busybox and installing JIT.
It attempts to start and I see the 4 launcher corners appear but FC's straight away before I can attempt to use it.
terracuk said:
I'm rooted with Busybox installed.. Just checked and it's busybox V1.15.3, maybe old version??
I dont have JIT installed or ax8mt. Might try updating busybox and installing JIT.
It attempts to start and I see the 4 launcher corners appear but FC's straight away before I can attempt to use it.
Click to expand...
Click to collapse
try a reboot....
If you read the original thread, there were some similar reports. And on other devices it worked. Not sure why ....sorry for the excitement, on mine it works.
BUSYBOX: on my device is 1.18.4.
elderduke said:
try a reboot....
If you read the original thread, there were some similar reports. And on other devices it worked. Not sure why ....sorry for the excitement, on mine it works.
BUSYBOX: on my device is 1.18.4.
Click to expand...
Click to collapse
No worries glad you have it working
This app seems to be V20 ??
Reboot didnt help. I might try installing new busybox.. Although a quick search I noticed someone lose xrecovery after updating busybox from market.. I'll search and read some more to make sure everything will be ok if I start messing with busybox..
terracuk said:
No worries glad you have it working
This app seems to be V20 ??
Reboot didnt help. I might try installing new busybox.. Although a quick search I noticed someone lose xrecovery after updating busybox from market.. I'll search and read some more to make sure everything will be ok if I start messing with busybox..
Click to expand...
Click to collapse
no, wait, use the x8toolbox. It will help you install JIT and busybox both. And this way U skip the market step.
terracuk said:
No worries glad you have it working
This app seems to be V20 ??
Reboot didnt help. I might try installing new busybox.. Although a quick search I noticed someone lose xrecovery after updating busybox from market.. I'll search and read some more to make sure everything will be ok if I start messing with busybox..
Click to expand...
Click to collapse
Not V 20, V 20 app seems to work only on CM7. This one is taken from the post 30 of that thread.
elderduke said:
Not V 20, V 20 app seems to work only on CM7. This one is taken from the post 30 of that thread.
Click to expand...
Click to collapse
I tried the one from post 30 on that thread and the one off this thread. When I install the .APK with easy installer the file info says "Xperia Active 2.0.A.0.20" Maybe i've got the wrong idea?
no, wait, use the x8toolbox. It will help you install JIT and busybox both. And this way U skip the market step
Click to expand...
Click to collapse
thx i'll give that a try..
Right. Thing is the other apk's of the original thread cannot be installed on 2.1. since they are compiled for CM7 (2.3.x).
ok. Installed busybox 1.18.4 using x8toolbox and lost xrecovery. rebooted fone and flashed xrecovery back to fone. Installed JIT. quadrant score went to 512 (woo! )
I have Xrecovery back. Busybox 1.18.4 installed, JIT installed. then...
I Installed the Xperia Active and it still doesnt work.. FC again!..
ah well not to worry.. Glad you got it working on yours..
terracuk said:
ok. Installed busybox 1.18.4 using x8toolbox and lost xrecovery. rebooted fone and flashed xrecovery back to fone. Installed JIT. quadrant score went to 512 (woo! )
I have Xrecovery back. Busybox 1.18.4 installed, JIT installed. then...
I Installed the Xperia Active and it still doesnt work.. FC again!..
ah well not to worry.. Glad you got it working on yours..
Click to expand...
Click to collapse
Oh, one other thing, no idea if it is important or not.
I use link2sd and I have a FAT 32 ext. partition. So, when I installed it, automatically was moved (link) there. Maybe this way I don't have the conflict you were mentioning?
Cheers, sorry for that...
One theme
Guys, great theme done by AChep & D-Shel that works on stock, to restyle your X8, you can find here:
http://forum.xda-developers.com/showthread.php?t=1214655
Credits go to them, AChep and D-Shel who are doing a great job, again.
...Still, that agile lock screen really does the trick, in my oppinion.
Cheers,
how to return it to its original state?.,
Uninstall apk? Or go back to backup in order to remove theme?
Hi ,
I am using GingerDX v14 re-up {for mini pro} and whatever I try, I cannot get full access to the android market. Neither all my (paid) application are showing up on My apps nor can I find them with the search function on the market. Strange thing that some apps are available, some not.
I am using Market build version 3.1.5 (tried it with 3.0.27 as well), did all types of reboot, new installs and factory resets etc.
No success
Any suggestions?
Forgot to mention that I used GingerDX (based on MiniCM7) v11 with market 3.0.27 without any problem, all my apps available, everything available on market.
are you using a stock kernel? my market is running fine.
GingerDX v14 and Android Market
Kernel version
2.6.29
[email protected] #1
check your google acount to se if your sined in if so reflash it works
Sent from my MZ604 using xda premium
GingerDX v14 and Android Market
Thanks for your reply,
I am signed in and reflashed. Still some apps are missing.
Interestingly GinTonic.SE v1.67 and MiniCM7 Pro both working out of the box.
Anyway, guess I will switch to GinTonic.SE v1.67 .
joeheim said:
Thanks for your reply,
I am signed in and reflashed. Still some apps are missing.
Interestingly GinTonic.SE v1.67 and MiniCM7 Pro both working out of the box.
Anyway, guess I will switch to GinTonic.SE v1.67 .
Click to expand...
Click to collapse
Try this
Open market(wait till it says "Apps" on the title bar)
press "menu" button (left most hard button on mini pro)
touch "settings"
scroll down a bit and open "content filtering".
check the "show all apps" option in the ed of the list and click OK
Hope that solves ur problem
rosshalz said:
Try this
Open market(wait till it says "Apps" on the title bar)
press "menu" button (left most hard button on mini pro)
touch "settings"
scroll down a bit and open "content filtering".
check the "show all apps" option in the ed of the list and click OK
Hope that solves ur problem
Click to expand...
Click to collapse
Lol that still mapping that got fixed with the new market update
Glad its fixed
peace
GingerDX v14 and Android Market
Tried all the mentioned things in advance, unfortunately no progress. Did a little bit of reading on the Market App internet site. Missing apps in my apps are ( perhaps not a common but nevertheless existing ) known problem. So far no solution.
So, two options, I am one of the unlucky ones or there is some kind of problem with this specific GingerDX v14 and my device as the App Market works like a charm with GinTonic 2.0. So I will stay with it and give GingerDX another try after one or two updates.
Anyway, thanks for your help.
Hi
I have the same issue (no google apps in market) and tried all suggestions but still nothing.
---------- Post added at 12:04 PM ---------- Previous post was at 11:58 AM ----------
Hi
I have the same issue (no google apps in market) and tried all suggestions but still nothing.
GingerDX v14 and Android Market
quotes from android market support site:
The Android operating system is open source, which means that any device manufacturer is free to use Android on its devices. However, Android Market is an application created by Google that is only made available to devices that pass Google’s compatibility requirements. In addition, manufacturers must obtain a license from Google in order to install Android Market on their devices.
Furthermore (and that is what happens to me)
Some users have reported that when searching in the Android Market app, they get a large number of results, but they're unable to scroll beyond the first page of those results. We're aware of this issue, and we're currently investigating.
and
We're aware of reports from some users that several applications are missing under "My Apps" on their devices, and we're currently looking into the issue.
The latter two are unsolved issues and are under investigation. But still possible that there is a problem with compatibility requirements as it only happens with GingerDX v14/v15. As I mentioned, others like GinTonic or MiniCM7 Pro working without any problems. So my advice is switching to a working system/ROM and wait for further updates of GingerDX.
Thanks for the answer