I hope this is not a dumb question, but I am quite desperate . Well I need to flash the csc and the modem from my original firmware, because I want good signal and language and the other stuff that came with it. What should I do in order to get from the original firmware only csc.tar and modem.tar to flash via odin? TIA
If you look near the bottom of the opening post on this thread: http://forum.xda-developers.com/showthread.php?t=1075278
There is a bunch of csc packages. Depends where you are from?
I saw that thread, I also download a pack, but there was the hole rom in a .tar. Not csc, modem and pda. I am from Romania
http://forum.xda-developers.com/showthread.php?t=1131950
Shipped modem collection .
jje
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=1131950
Shipped modem collection .
jje
Click to expand...
Click to collapse
With the modem, I also get the language? To understand better: I want to send sms with my language letters and you say that flashing the proper modem, I also get my language keyboard? Hope you understand me
CSC for language modem is phone radio baseband .
CSC as posted here .
If you look near the bottom of the opening post on this thread: http://forum.xda-developers.com/show....php?t=1075278
There is a bunch of csc packages. Depends where you are from?
jje
If yo look at this section in the link I posted previously you will find individual CSC packages.http://forum.xda-developers.com/showthread.php?t=1075278
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL] Uploaded with ImageShack.us[/IMG]
Well, I am blind . Thank you very much for the answers and sorry for the delay, but I was out with business and couldn't answer to you. Thanks again VERY MUCH
Octavius69 said:
I saw that thread, I also download a pack, but there was the hole rom in a .tar. Not csc, modem and pda. I am from Romania
Click to expand...
Click to collapse
Which CSC and Modem versions do you need?
Octavius69 said:
With the modem, I also get the language? To understand better: I want to send sms with my language letters and you say that flashing the proper modem, I also get my language keyboard? Hope you understand me
Click to expand...
Click to collapse
The firmware version that's on the device has to support your language, a CSC or Modem package cannot add this to the firmware.
Intratech said:
The firmware version that's on the device has to support your language, a CSC or Modem package cannot add this to the firmware.
Click to expand...
Click to collapse
CSC can't do that? So I guess with these custom roms that I am gonna stick for a while I won't be able to use my language (romanian) for messaging
Octavius69 said:
CSC can't do that? So I guess with these custom roms that I am gonna stick for a while I won't be able to use my language (romanian) for messaging
Click to expand...
Click to collapse
You can use install a keyboard that supports the language like Gingerbread keyboard which is free on the market.
Intratech said:
You can use install a keyboard that supports the language like Gingerbread keyboard which is free on the market.
Click to expand...
Click to collapse
Ok I did that. You are just fantastic. All of you here are. Have a nice day/evening
Can someone explain how can I extract/create a new tarball for the CSC or the MODEM from the bundled tarball (PDA/MODEM/CSC)?
And how can I create a "frankenstein" tarball with given PDA, MODEM and CSC?
RenatoN said:
Can someone explain how can I extract/create a new tarball for the CSC or the MODEM from the bundled tarball (PDA/MODEM/CSC)?
And how can I create a "frankenstein" tarball with given PDA, MODEM and CSC?
Click to expand...
Click to collapse
I really want to know this too. I want to use XWKJ2 official firmware with ZTO (Brazil) CSC; according to http://forum.xda-developers.com/showthread.php?t=1075278 the latest brazilian firmware is UHKI1, but the only individual CSC package is ZTOKE2. Is there a way to get CSC from UHKI1 firmware and put it on XWKJ2?
Related
i installed this official firmware
XWKE2
Firmware info
PDA:XWKE2
PHONE: XXKDJ
Xen
but if i connect to kies i see my csc is ke1 (kor) korea it must be belgium not korea what to do ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL] Uploaded with ImageShack.us[/IMG]
Use the dialer to imput *#272*<your IMEI># then install the CSC you want.
dandroid13 said:
Use the dialer to imput *#272*<your IMEI># then install the CSC you want.
Click to expand...
Click to collapse
done but im in the menu sales code xen but i cant choose nothing to install ?
muratza said:
done but im in the menu sales code xen but i cant choose nothing to install ?
Click to expand...
Click to collapse
You can try flashing a CSC from the firmware thread then. But why did you install KE? It's an old one.
dandroid13 said:
You can try flashing a CSC from the firmware thread then. But why did you install KE? It's an old one.
Click to expand...
Click to collapse
ke2 its for my country belgium
You would be better installing a later firmware with the correct country CSC.
Rather than installing a Korean verion .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
JJEgan said:
You would be better installing a later firmware with the correct country CSC.
Rather than installing a Korean verion .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
thanks i intalled this one
Firmware info
PDA:XWKG1
PHONE: XXKG1
Date: 05/07/2011
Android 2.3.3
but one thing is changed kernelversion 2.6.35.7-I9100xwkg1-CLlabeltest_I9100xwkg1. its not [email protected] . . .
muratza said:
ke2 its for my country belgium
Click to expand...
Click to collapse
XXKH3 includes Belgium and is a later version (also multi-CSC).
---------- Post added at 12:13 PM ---------- Previous post was at 12:11 PM ----------
muratza said:
But one thing is changed kernelversion 2.6.35.7-I9100xwkg1-CLlabeltest_I9100xwkg1. its not [email protected] . . .
Click to expand...
Click to collapse
You must flash a rooted kernel again.
its not [email protected]
Nothing to do with anything . Ignore [email protected]
jje
muratza said:
i installed this official firmware
XWKE2
Firmware info
PDA:XWKE2
PHONE: XXKDJ
Xen
but if i connect to kies i see my csc is ke1 (kor) korea it must be belgium not korea what to do ?
[/URL] Uploaded with ImageShack.us[/IMG]
Click to expand...
Click to collapse
You have the wrong software for your country
I think you need to flash XEN XWKF3 with Odin.
Download and install: http://www.multiupload.com/6Y37MAMVEQ.
After installation and reboot go back to recovery and wipe data/facory reset and cache and than reboot.
I need to know what the Phone PDA and CSC mean/is it same as AP CP and CSC in the *1234# menu? Is there a thread which explains this?
I am new to Android rooting flashing etc, but was a symbian developer. Is the codes similar to to product codes in Nokia for firmwares versions?
And if I do flash a firmware with a diff CSC code or AP (I dont know which is different) will it work. And also will I be able to go back to my original?
This is my screenshot of my phone's code, I am from Chennai, India.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone Codes Clarification
Hi. Would love to know this as well please. Timely question
All in the stickies .
jje
Sent from my GT-I9300 using xda premium
Answer
I know this thread is very old but i am still replying because sometimes when you search on GOOGLE for these kind of answers and you end up here with just the Question but NO Answer then it feels bad :crying:.
So, here is the Answer to your First Question:
arjunpaliath said:
I need to know what the Phone PDA and CSC mean/is it same as AP CP and CSC in the *1234# menu? Is there a thread which explains this?
Click to expand...
Click to collapse
AP, CP, CSC correspond with PDA, PHONE and CSC respectively.
Once again:
AP = PDA
CP = PHONE or MODEM
CSC = CSC
arjunpaliath said:
Is the codes similar to to product codes in Nokia for firmwares versions?
Click to expand...
Click to collapse
Kind of but not totally. Combination of AP, CP and CSC are much more complex than that of Nokia firmware versions.
arjunpaliath said:
if I do flash a firmware with a diff CSC code or AP (I dont know which is different) will it work. And also will I be able to go back to my original?
Click to expand...
Click to collapse
If you do flash a firmware with a different CSC code or AP then your Phone might not work properly ie. you may have problems in recieving Mobile Network, Wifi, Radio, etc. Worst case is that you may Brick your phone (though this is very unlikely)
Lastly, Yes you will be able to go back to your original firmware by flashing the original/stock firmware for your phone using Odin 3 provided your phone is not bricked. :angel: :fingers-crossed:
khurram.khu said:
I know this thread is very old but i am still replying because sometimes when you search on GOOGLE for these kind of answers and you end up here with just the Question but NO Answer then it feels bad
As i said its in the stickys basic faqs and guides .
PDA refers to the build version of the software/firmware
Phone refers to the baseband/modem version
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
jje
Click to expand...
Click to collapse
JJEgan said:
khurram.khu said:
I know this thread is very old but i am still replying because sometimes when you search on GOOGLE for these kind of answers and you end up here with just the Question but NO Answer then it feels bad
As i said its in the stickys basic faqs and guides .
PDA refers to the build version of the software/firmware
Phone refers to the baseband/modem version
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
jje
Click to expand...
Click to collapse
Yes, I know about the stickies. But it wont harm anybody if the info if posted here again. Besides I was replying to the question about "what the Phone PDA and CSC mean/is it same as AP CP and CSC ".
Click to expand...
Click to collapse
All in the stickies .
Click to expand...
Click to collapse
What are the 'stickies?'
Yes, I know about the stickies.
Click to expand...
Click to collapse
I don't!!!
kyedmipy said:
What are the 'stickies?'
I don't!!!
Click to expand...
Click to collapse
Bookmark this >> http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125 <<
AP CP and CSC which is product code ?
Hi,
This is one of my first posts so please bare with me. You will need to download a few programs to get this working.
The first is frija. LINK - https://forum.xda-developers.com/attachment.php?attachmentid=4886005&d=1574653611
Above app is not mine all credit to the dev in the link.
Secondly you will need Odin I'm sure you can all source this yourselves.
After downloading and installing frija, open the programme and search for SM-N970F CSC code DBT
Continue to download the firmware and then flash with odin.
Simple method if you cant wait for it to be rolled out in your country.
I am not responsible for your data or devices, follow the steps at your own risk.
This should work for note 10 plus also, just change the model number and keep the csc as DBT
can i keep home csc ?
Not Sure
mclaudio said:
can i keep home csc ?
Click to expand...
Click to collapse
Hi,
I am not sure if that will work but you're welcome to try and feedback to others.
mclaudio said:
can i keep home csc ?
Click to expand...
Click to collapse
from itv to dbt android 10, it lock on 80% to flash system img
GigilinE said:
from itv to dbt android 10, it lock on 80% to flash system img
Click to expand...
Click to collapse
that means the phone must be formatted, right?
Clean install
mclaudio said:
that means the phone must be formatted, right?
Click to expand...
Click to collapse
I did a clean install, in odin i selected wipe in options so formatted all and it installed perfectly. Perhaps use smart switch to backup all your data and then flash if you still have this option available to you.
Thanks... unfortunelly the download of the file from Server is not working...too slow (
Enviado do meu SM-N975F através do Tapatalk
Banwell13 said:
I did a clean install, in odin i selected wipe in options so formatted all and it installed perfectly. Perhaps use smart switch to backup all your data and then flash if you still have this option available to you.
Click to expand...
Click to collapse
I also stuck at about 70% any ideas? i did factory reset and whipe before, but it didn't help.
mimo314 said:
I also stuck at about 70% any ideas? i did factory reset and whipe before, but it didn't help.
Click to expand...
Click to collapse
What model phone are you using and what network CSC are you going from and to? I went from UK unlocked direct Samsung handset BTU to Germany DBT model SM-N970F. Worked without issue. If you give more details maybe myself or someone else will have the answer.
Odin files version 3.13
Banwell13 said:
What model phone are you using and what network CSC are you going from and to? I went from UK unlocked direct Samsung handset BTU to Germany DBT model SM-N970F. Worked without issue. If you give more details maybe myself or someone else will have the answer.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What CSC file are you using from the download as there are 2. I didnt use the home file. Maybe that is causing issues if you did?
Link to a picture of what i mean. https://1drv.ms/u/s!Aut8snIm8k5x2FC3FFu9QToEOqPv
Don't work for my Note 10 + 5G SM-T976B only Pie shows up latest firmware! That Sucks....
AP : N975FXXS1ASKB
CP : N975FXXU1ASJ4
CSC : N975FOXM1ASJC
Model :SM-N975F/DS Version
I downloaded matching Odin n975f dbt files, my CSC is See ( south east Europe)
Can confirm this worked for me without wiping (Using home_csc). I had the first beta installed before (through update.zip).
Thanks!
I have OTA with Android 10
Hi , if i flash my note 10 with DBT csc code it will be any problem using my phone i UK
My csc code is o2u,xec
I did it, works very well, tnx! I used Android 10 SER(EU, Russian, all lang included, all CSC included), downloaded with SamFirm app, with Odin 3.14.1 using CSC(not Home CSC). Before all, i backed-up all my stuff with Smart Switch to PC. My SIM was in phone(if it does any differences at all)...
P.S Exynos Note 10 plus is in case....
P.S 2 Android 9 aka PIE was before that....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi to all.
After the recent news about One UI 2.1 on Galaxy 2019 series, a new S10 updates (which seems close to be officially released) has been reported under form of buildstrings:
*G970U1UEU3DTC3
*G973U1UEU3DTC3
*G975U1UEU3DTC3
At this point I assume that the same one will be released also for the exynos versions in April/May.
P.S = Thanks to Max Weinbach for infos.
UPDATE 1: Another community moderator has announced a more clear release timeline (between 3 weeks). More info on this article
UPDATE 1,5: Seems that Sammobile source expects the release of this update for the next week. More info on this article
UPDATE 2: Finally One UI 2.1 for S10 Exynos has been out in Switzerland. Here are the links:
S10e S10 S10+
UPDATE 2,5: A short introduction video about this update, found by Tagdu17
Useful sources:
Firmware Downloader Tool
Odin Flash Tool (thanks to henklbr)
Any details on changes?
redoregon said:
Any details on changes?
Click to expand...
Click to collapse
The same of S20/Z Flip, but without 120hz smoothness (hardware limitation).
UPDATE 1: Read first post
UPDATE 1,5: Read first post
Orlaf said:
The same of S20/Z Flip, but without 120hz smoothness (hardware limitation).
Click to expand...
Click to collapse
So we get the Single Take?
devlerr said:
So we get the Single Take?
Click to expand...
Click to collapse
Probably... Wait and see.
UPDATE 2: Download links available for Exynos version
Patch level: 1 April
P.S = New Samsung Keyboard is great!
Single Take feature is present
Great! Wait for the First custom rom! Amy changelog?
rubino25 said:
Great! Wait for the First custom rom! Amy changelog?
Click to expand...
Click to collapse
Three words: S20 without 120hz.
There are many things, included a new fingerprint unlock animation.
Multi csc
Can we flash this on OXM XEU
...
Great news, next month my Note9's turn ^^
Megadon99 said:
Can we flash this on OXM XEU
Click to expand...
Click to collapse
My phone is an OXM ITV, and I have flashed it without any problem.
Orlaf said:
My phone is an OXM ITV, and I have flashed it without any problem.
Click to expand...
Click to collapse
Do you still have ITV,ITV,ITV,ITV under CSC tab in your device software info ?
Or maybe you have something like AUT,ITV,ITV,ITV now coz you flashed the AUT firmware ?
Ik it's OXM multi csc ROM but I would like to know if flashing AUT on my XEF (France unbranded) device will change my XEF,XEF,XEF,XEF to another CSC combination under my CSC tab
Tagdu17 said:
Do you still have ITV,ITV,ITV,ITV under CSC tab in your device software info ?
Or maybe you have something like AUT,ITV,ITV,ITV now coz you flashed the AUT firmware ?
Ik it's OXM multi csc ROM but I would like to know if flashing AUT on my XEF (France unbranded) device will change my XEF,XEF,XEF,XEF to another CSC combination under my CSC tab
Click to expand...
Click to collapse
Yes, I still have ITV/ITV/ITV/ITV under "telephone sw version":
Can someone that already downloaded the firmware upload it in some mirror link? the sources are too low speed......
Orlaf said:
Yes, I still have ITV/ITV/ITV/ITV under "telephone sw version":
Click to expand...
Click to collapse
Ah that's good news, thx dude.
I assume you did the update through Odin using the HOME_CSC file ?
Delpo_96 said:
Can someone that already downloaded the firmware upload it in some mirror link? the sources are too low speed......
Click to expand...
Click to collapse
Use SamFirm firmware, it's the fastest way to download official Samsung firmwares.
Download link here : https://samfirmtool.com (you should use v0.3.9, newer are **** imo xD)
Tagdu17 said:
Ah that's good news, thx dude.
I assume you did the update through Odin using the HOME_CSC file ?
Use SamFirm firmware, it's the fastest way to download official Samsung firmwares.
Download link here : https://samfirmtool.com (you should use v0.3.9, newer are **** imo xD)
Click to expand...
Click to collapse
Exactly: HOME_CSC. Normal CSC erase user data.
I am currently running:
Build: ALEXNDR.N960FXXU6FTJ5
Baseband version: N960FXXU6FTJ1
>MAKE SURE YOU HAVE LATEST MODEM AND BOOTLOADER INSTALLED!
Getting ready to flash a new rom, but I haven't done this for a while.
1) How do I check what modem version I have?
Based on the I *think* the modem is "FTJ1", but I'm not 100% sure.
2) How do I find out if there is a newer modem available?
3) What Bootloader version do I have? Is it "6" (the 5th character from the right in the Baseband version)?
Download the latest firmware from samfw.com. Since that website source builds official Samsung servers, the latest firmware there should be always the latest.
Thank you, @Cyndaquissshhh . Just to confirm, it doesn't matter that, in the past, I had flashed an unofficial ROM to my Note 9?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now where can I find the BL/CP N960FXXS9FVB1 for downloading and then flashing via ODIN.
I found BL and CP here - scroll down a bit.
Dougmeister said:
Thank you, @Cyndaquissshhh . Just to confirm, it doesn't matter that, in the past, I had flashed an unofficial ROM to my Note 9?
Click to expand...
Click to collapse
Yes, no problems. I have done this a few times before.
@Cyndaquissshhh what's the trick to downloading the firmware? I click it and it won't download...
Oh, there are three buttons (on some pages there will be four). You can either download it from Google Drive or "Download SamFW server". I don't recommend "download on browser" since the downloaded file would get stored as site data. As you can imagine that's not a good thing...
I find their site to be very confusing. Thank you for your help, @Cyndaquissshhh . I finally ended up download a file named "Samfw.com_SM-N960F_INS_N960FXXU9FUK1_fac.zip".
Can you (or anyone) verify that I have the correct file?
(Last time I tried something like this I soft-bricked my phone... thanks.)
Dougmeister said:
I find their site to be very confusing. Thank you for your help, @Cyndaquissshhh . I finally ended up download a file named "Samfw.com_SM-N960F_INS_N960FXXU9FUK1_fac.zip".
Can you (or anyone) verify that I have the correct file?
(Last time I tried something like this I soft-bricked my phone... thanks.)
Click to expand...
Click to collapse
I don't own a Note 9, but yeah, you have the right files
@notnoelchannel thank you.
Is there a step-by-step showing how to update this file? I believe I can either use Odin or TWRP...?
Dougmeister said:
@notnoelchannel thank you.
Is there a step-by-step showing how to update this file? I believe I can either use Odin or TWRP...?
Click to expand...
Click to collapse
If there's 4 tars in it, choose what it says. Like if it says AP, then choose the AP in Odin (you'll have to use ODIN ofc)
I don't know how it goes for newer devices but I had to always choose only a single file and then flash..
@notnoelchannel the .zip file has 5 files that all match up as you said (AP, BL, CP, and CSC) but the 5th file starts off with "HOME_". Does that go in the "USERDATA" box in Odin?
Dougmeister said:
@notnoelchannel the .zip file has 5 files that all match up as you said (AP, BL, CP, and CSC) but the 5th file starts off with "HOME_". Does that go in the "USERDATA" box in Odin?
Click to expand...
Click to collapse
Don't use the HOME_CSC (i guess)
You need only 4 files, try flashing the 4 files but don't put the "HOME_" one
But as I said I don't own a Note 9, so I recommend to ask someone else :/
But if you choose all the files, it will flash the whole stock rom back!!!so don't!!! only BL and CP as Painkiller-axel said
Thank you. I have other questions regarding the flashing process but I think I will start another thread so this one doesn't get too confusing for people to read.