[Q] Bell Atrix Unlock - Atrix 4G Q&A, Help & Troubleshooting

I've heard of the news of the unlocked bootloader being availible to Bell Atrix's but it seems as if though there isn't a full tutorial for the Bell unlock, or the internationals. I'm just a bit curious to see if there is a tutorial or anything out there that is in one compiled resource that is strictly for the Bell Atrix?
td;lr noob wants to do this but has no clue, and is confused.
Thanks for any help.

Anouthen said:
I've heard of the news of the unlocked bootloader being availible to Bell Atrix's but it seems as if though there isn't a full tutorial for the Bell unlock, or the internationals. I'm just a bit curious to see if there is a tutorial or anything out there that is in one compiled resource that is strictly for the Bell Atrix?
td;lr noob wants to do this but has no clue, and is confused.
Thanks for any help.
Click to expand...
Click to collapse
I spent a few hours and finally got it unlocked and running Gingerbread (everyone here calls it GB).
Your best bet is to use this: http://forum.xda-developers.com/showthread.php?t=1136261 to unlock your bootloader (follow the newbie section) - link 1
Then this: http://forum.xda-developers.com/showthread.php?t=1138541 to install CWM - link 2
Then to install GB used this: http://forum.xda-developers.com/showthread.php?t=1169409 - link 3
I'm on bell, and everything seems to work right out of the gates except for data which I am working on right now. EDIT: simple mistake, set up APN on phone using information for bell here: http://forum.xda-developers.com/showthread.php?p=13607746#post13607746
Rough steps are as follows:
1) Unlock bootloader (everything you need to know about this will be located in the first post)
2) Backups! I used both mybackup and titanium backup to back up all my data and apps as this will all be erased (I think unlocking the bootloader will root your phone and thus give super user access on things? Mine was rooted previously). In the unlikely event this doesn't root or whatever this is what I did to root my phone before: http://forum.xda-developers.com/showthread.php?t=1070076
3) Install the CWM using the second link and fastboot. Then set up a recovery just in case? I never had to use it, but it seems like the right thing to do.
4) Install the android developer SDK so you can run ADB shell and do the commands as per link three that will tell you which boot file to flash. Information on using adb can be found here: http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/
5) Use moto-fastboot (this is different from fastboot used before) to upload the GB rom with the ram fix in link three and then the appropriate boot file (do these both in sequence then reboot phone)
6) You will likely need to moto-fastboot -w to clear cache to end a boot loop.
Hopefully this gives you enough links to get started (I read through each of these fully). Please follow the links and not my rough guide as that is just meant to give you an idea of what I did and is no means meant to be comprehensive or eloquent. Whew, power to the noobs!
If you have any specific questions I will try and help. Remember there is only one rom (as far as I could find) that is working on international unlocked bootloader phones that will provide full ram right now: 2.3.4 OrangeFR with ram fix.

One last thing, once I got low battery the ringer wouldn't stop working. I used ADB shell to restore the four sound files not included in this GB build. I did this by downloading files from the following thread: http://forum.xda-developers.com/showthread.php?t=1171527. Then I followed this to change read/write permissions by typing adb remount (at the end I did adb remount ro to return to read only): http://forum.xda-developers.com/showthread.php?t=745019. Then I used this to figure out how to copy and past files via the adb shell: http://www.londatiga.net/it/how-to-use-android-adb-command-line-tool/. Finally, I copied the following files from the first link (which i placed in my root folder) to /system/media/audio/ui: LowBattery.ogg, Undock.ogg, Unlock.ogg, Dock.ogg. That makes the two files the same. I would be posting this in other places, but I can't yet . Hope this helps someone. Once again feel free to ask me any questions, I actually thoroughly enjoyed figuring all this out. Also, I ran my battery low to test it and it worked.

Related

Back to AT&T Stock 6.1 6601 in 4 Steps

This post is for people who have already upgraded their Streaks and know the basics. This guide won't help you upgrade or root.
I spent over 24 hours trying to get my Streak back to stock. I was not happy with the O2 branding, Performance, and aesthetics of 2.1 so I wanted to go back but every method I found online didn't work for me. So I created my own little method.
Note: All the files you need are in a zip file below. The hardest part for me was finding files that worked and/or were not dead links. But if you download my files and use this guide I'm not responsible if you screw up.
Step 1: Download Zip File
It has everything you will need in order to Downgrade.
Step 2: Downgrade to a stock O2 build of 1.6 (important)
- Place the Step 2 Update.pkg on the root of your sdcard.
- Place Step 2 Recovery folder where you can get to it using CMD / Terminal via Fastboot
- Place your Streak in fastboot mode
- Type this command into CMD or Terminal " fastboot -i 0x413c flash recovery recovery.stock.new.img "
- Once the streak shows done pull out the battery and replace it, then boot using volume keys
- Update from sd card
Step 3: Clockworkmod Recovery
- Place Step 3 clockwork folder where you can get to it using CMD / Terminal via Fastboot
- Place Step 3 clockworkmod folder on the root of your sdcard
- Place your Streak in fastboot mode
- Type this command into CMD or Terminal " fastboot -i 0x413c flash recovery recovery.img "
- Once the streak shows done pull out the battery and replace it, then boot using volume keys
- Update from sd card
Step 4: Nandroid (almost done)
- Once your in the clockworkmod recovery menu select nandriod using the volume and camera buttons
- Select Restore
- Now you will see Niles Method, Select it and wait for the restore to finish.
- Once it's done reboot the system using nandroid or the battery pull method.
- During boot up if your keys don't blink then your done enjoy, if your keys blink then go to step 5
Step 5: Stop the flashing
- If you got this far then I'm sure you know how to root your device. So all you need to do is run the r2 superboot in Step 5 folder.
And thats it folks. The above worked for me and a number of other people and their streaks. I can't guarantee that it will work for everyone but other methods I found online did not work for myself and the others at all.
Sorry but to go back to 6601 you should follow thid thread
http://forum.xda-developers.com/showthread.php?t=778397
geek78 said:
Sorry but to go back to 6601 you should follow thid thread
http://forum.xda-developers.com/showthread.php?t=778397
Click to expand...
Click to collapse
I tried that one and along with a few other people and we did not seem to get that method working, 3 out of the 5 of us did. The other two of us used a mixture of methods in order to get it to work. As explained above.
I believe you had a personal investment in the one you linked to, it's nothing personal but not every method works for every person like it did not work for some of us. Don't get defensive it does not matter about which they use as long as people have multiple methods to try if they get stuck. It's all about helping the user right? at least I thought it was.
Many thxz mikeniles. I have been trying to go back for a few days now i most have sending back the streak to dell for warranty exchange. Did tried a few others I think like the one above also with the one that is for the macs and nothing,
thxz for putting the files in one places to find them all is hard like the one that is above has link that takes me to another sites not the files.
like you saysd above it is about the helping everyone and when dell send me back the new one will not do update until ready for.
this is my first posts because my english is bad and say thank you please dont make fun of.
clark kent
ThatGuyClark said:
this is my first posts because my english is bad and say thank you please dont make fun of.
Click to expand...
Click to collapse
That guy clark, no one here will make fun of your english it's not that type of place we are all just here to help and or in my case learn.
No thanks needed brother it's a team effort someone else put the files online I just found them. Someone else came up with the methods I based mine off of. All I did was put them together in one file and share with you the mixture that worked for me. Every single person on this forum is why you got yours working not just me.
Not sure why you have to send your streak in but good luck with it and don't be afraid of people making fun of you, Your voice counts.
Always good to have alternative ways as people are running different systems and configurations.
Were you able to get oem-version back to 31-us or is it still at 21-us?
Sent from my Dell Streak using XDA App
When I get to step 2 update from SD card, I get all files are up to date...rebooting in 30 seconds. Any ideas?
alright i am successfully back to us 6601. but my baseband version
GAUSB1A110421US and OemVersion GAUSB1A111231. am i 100% back to stock?
HELP .
On step 4 I keep getting
Checking MD5 sums…
MD5 mismatch!
E:Can’t Find MISC:
How can I solve this ?
notoriousguy said:
On step 4 I keep getting
Checking MD5 sums…
MD5 mismatch!
E:Can’t Find MISC:
How can I solve this ?
Click to expand...
Click to collapse
Same problem here.
UPDATE:
So I went back to the other instructions [HOW-To] Go back from O2 2.1 to Stock at&t 6601 WITH BASEBAND DOWNGRADE and just did Step 2. It took a bit of time, but came out perfect! Thanks to everyone's helpful comments.
tltwelve said:
alright i am successfully back to us 6601. but my baseband version
GAUSB1A110421US and OemVersion GAUSB1A111231. am i 100% back to stock?
Click to expand...
Click to collapse
I've got a stock att, baseband is xxx231-US and oem is 231
aaronkalb said:
Same problem here.
UPDATE:
So I went back to the other instructions [HOW-To] Go back from O2 2.1 to Stock at&t 6601 WITH BASEBAND DOWNGRADE and just did Step 2. It took a bit of time, but came out perfect! Thanks to everyone's helpful comments.
Click to expand...
Click to collapse
can you help me ? i tried doing the step 2 but i didnt understand about the files in the correct folder and the thing it asked .. I would appreciated it if you can help me out
Are you still stuck, sorry I have been MIA, Droid stuff is a hobby it does not pay the bills. Let me know if you need help still.
6.1???
I was shocked when I saw the title
"Back to AT&T Stock 6.1 6601 in 4 Steps"
Your method doesn't work because it produces MD5 Mismatch when you try to run it.
Worse yet, your method broke my phone because once you install that version of clockwork recovery, you can't install any other version without it just blackscreening. Worse yet, that version doesn't work for regular packages either. *Many hours of trial an error just to get it back to working, still no ATT rom.

[Q] Telstra Atrix Mac OSX aRoot question Australia

I have been reading the http://forum.xda-developers.com/showthread.php?t=1006368&highlight=mac+osx thread (DesignGear's aRoot script, edited to run on Mac OS X)
My phone is connecting fine in USB debugging mode. The script runs but it doesn't seem to be working quite right. There are many files failing to copy.
Here is what I get when I run the script...
Getting temporary root access...
861 KB/s (585731 bytes in 0.664s)
Mounting /system as read/write ...
Cleaning up onclickroot mess ...
Rooting your device ...
failed to copy '/Volumes/Documents/Android/aRootMac_fix/bin/su' to '/system/bin/su': Read-only file system
Installing Superuser app ...
878 KB/s (196521 bytes in 0.218s)
Installing sqlite3 ...
failed to copy '/Volumes/Documents/Android/aRootMac_fix/bin/sqlite3' to '/system/bin/sqlite3': Read-only file system
Enabling sideloading ...
Enabling tethering ...
Enabling init.d support ...
failed to copy '/Volumes/Documents/Android/aRootMac_fix/bin/install-recovery.sh' to '/system/etc/install-recovery.sh': Read-only file system
failed to copy '/Volumes/Documents/Android/aRootMac_fix/bin/00remount' to '/system/etc/init.d/00remount': No such file or directory
Rebooting ...
Press any key to continue...
Then it reboots.
Superuser is installed, but I don't know if the process is successful or not. I'm also not sure what to do next.
This is my first post here and my first attempt at rooting, though its my third android device.
Thanks for your help in advance.
Nick
Depending on the software version of your Atrix.... aRoot doesn't work anymore.
(The part that is likely to be failing is psneuter, which was fixed by motorola a few software revisions ago)
You can check by opening SuperUser.apk and click on 'check su version' and if it fails, you don't really have root.
I too, am an OS X user.
As far as I know there is no way that actually works to flash your phone from OS X.
And I don't think there is any way to root anymore without flashing. (somebody can correct me if I am wrong)
I installed windows XP on a boot camp partition and installed RSDLite and moto-fastboot and unlocked/installed alternate ROMS.
http://forum.xda-developers.com/showthread.php?t=1136261 is probably where you should start.
dragula53 said:
As far as I know there is no way that actually works to flash your phone from OS X.
And I don't think there is any way to root anymore without flashing. (somebody can correct me if I am wrong)
Click to expand...
Click to collapse
Actually, for flashing this is not true. sbf_flash works fine.
OP, you should do a search for that. I'm on an MB Pro OS X 10.7.1. In fact, it worked where my Vista 64 bit machine + RSD lite wouldn't. I've used it several times to unlock the boot loader (IHOP_Bell.sbf). It worked flawlessly. After that, flash clockwork mod with moto-fastboot-osx64 or 32, and then you can just look for a ROM to install from cwm that is already rooted... which most of them are.
Based on the command line output, remounting the system partition for read/write failed, probably due to the "getting temporary root" step failing also. This means you don't have root because su wouldn't be copied over properly. aRoot is for 2.2.1... What version are you on?
Thank you both for you reply's.
I tried to check SU version and nothing happens, so I guess it's not rooted.
Also I checked my android version and I'm on 2.2.2 so I guess aroot's not for me.
I will try the RSD lite option next I guess..
Thanks again
Nicholox said:
Thank you both for you reply's.
I tried to check SU version and nothing happens, so I guess it's not rooted.
Also I checked my android version and I'm on 2.2.2 so I guess aroot's not for me.
I will try the RSD lite option next I guess..
Thanks again
Click to expand...
Click to collapse
Really, the RSD lite option? Why would you go to all the trouble of bootcamp and Windows when you could do it all on your current OS? Even some Windows users will tell you how frustrating it is to get RSD lite working on some machines. Works great on my netbook with Win7 Starter, but my main Win Vista 64 bit wouldn't do it no matter what.
For OS X, you just need:
sbf_flash
moto-fastboot-osx
Use the International Pudding thread as a guide to unlocking your bootloader. Once you've done that, the subject of root is almost moot because most ROMs are already rooted, you only need to install superuser.
Yeah I guess you're right I would prefer to do it on in OSX. I do already have a windows partition setup though, but I would rather not use windows if oI don't have too. It's just that in your earlier post the process sounded more complicated compared to the RSDLite option, which I have also already read a little bit about.
I have downloaded the files, but I'm not quite sure where to go from there. From what I can gather I need to unlock the bootloader first. But what do I do with the sbf_flash?
Thanks again
Nicholox said:
Yeah I guess you're right I would prefer to do it on in OSX. I do already have a windows partition setup though, but I would rather not use windows if oI don't have too. It's just that in your earlier post the process sounded more complicated compared to the RSDLite option, which I have also already read a little bit about.
I have downloaded the files, but I'm not quite sure where to go from there. From what I can gather I need to unlock the bootloader first. But what do I do with the sbf_flash?
Thanks again
Click to expand...
Click to collapse
Okay, well first of all, you need to flash the unlockable bootloader:
1. Turn off your phone, then hold the down volume button and tap the power button. The phone will start up with a cycling menu that initially says, "fastboot".
2. Press volume down several times until it says, "rsd". This is the mode you want to be in.
3. Press volume up to select this mode.
4. Open up Terminal, cd to where your files are and type:
Code:
./sbf_flash IHOP_Bell.sbf
5. Reboot your phone and hold down the volume button again. This time you want to be in "fastboot", so when it comes up, press volume up.
6. From Terminal, type:
Code:
./moto-fastboot-osx64 oem unlock
Use the 64 bit or 32 bit version of the commands depending on your system. If you're on Lion or have a pretty new computer, it'll be the 64 bit one.
It will tell you to type in that command again, but this time along with the id they've provided. Take a look at the screenshots in the Pudding thread, they basically show this step, but in a Windows command prompt. It's the same thing.
7. Reboot your phone:
Code:
./moto-fastboot-osx64 reboot
Now you can flash clockwork mod onto the recovery partition with moto-fastboot-osx also. The ORFR 2.3.4 thread has some good examples and instructions on general flashing. The gobstopper threads also have some recovery files and instructions you could use to start off. Once you've got recovery installed, you're pretty much in the clear. You can softbrick your phone, but with recovery it's easy to get back to a working state.
Good luck!
Hey thanks Maledyris, this is great. I had some trouble finding the IHOP_Bell.sbf but I have it now.
I also found the ORFR 2.34 system and webtop images, what is the difference between these and the HKTW files, which should I use?
I'm hoping that putting Gingerbread on this phone will improve my signal strength (I read this somewhere online). If it doesn't I would like the option of returning it and getting a different phone with proper reception. How much of this can be undone? should I need to?
when I unrared IHOP_Bell.rar I got intl-fix-try1.sbf
Is that right?
Sorry this is my first time and I'm totally noob and a bit nervous.
Hey one more question, I saw another post of yours from march and it said you'd gone back to 2.2.2....what are you running now??
Cheers,
Nick
Nicholox said:
when I unrared IHOP_Bell.rar I got intl-fix-try1.sbf
Is that right?
Sorry this is my first time and I'm totally noob and a bit nervous.
Click to expand...
Click to collapse
Well, I did it weeks ago, and back then it was actually called IHOP_Bell.sbf. It's possible the poster re-uploaded with a fixed version... Did you get it from International House of Pudding thread? If you did, that's the right one.
Nicholox said:
Hey one more question, I saw another post of yours from march and it said you'd gone back to 2.2.2....what are you running now??
Cheers,
Nick
Click to expand...
Click to collapse
Yeah, I'm currently on stock 2.2.2. I'll have time this week, so I'll probably play around with some of the newer ROMs people have been putting out. Before this, I had to go back because of stability and battery problems
Nicholox said:
Hey thanks Maledyris, this is great. I had some trouble finding the IHOP_Bell.sbf but I have it now.
I also found the ORFR 2.34 system and webtop images, what is the difference between these and the HKTW files, which should I use?
I'm hoping that putting Gingerbread on this phone will improve my signal strength (I read this somewhere online). If it doesn't I would like the option of returning it and getting a different phone with proper reception. How much of this can be undone? should I need to?
Click to expand...
Click to collapse
Ah, uhh... I'm not sure about the whole undoing part for you. I'm on Bell, and Bell has packages under the gobstopper threads to go between stock 2.2.2 and the alpha 2.3.4. I don't know if anyone has made the same type of thing for Telstra? Someone who's on Telstra could look at the images that were created for the Bell 2.2.2 stock cwm recovery and do the same for Telstra. I think it would depend on your carrier whether they care if you've unlocked your boot loader and changed the firmware? I've never tried to return my phone, but I bet they don't check. You never know though.
If reception and the radio is your main concern, I would probably see if I could just flash the radio instead of trying to flash full ROMs. It would be less of a noticeable change if you did decide to return it. I don't have suggestions on that though, you'd have to do a search. I don't quite remember anymore, but I think I flashed either the Orange or Telstra radio ages ago before we had an unlocked bootloader. It was fairly quick and painless. I had done it with RSD lite and win7 before I knew sbf_flash existed.
maledyris said:
Really, the RSD lite option? Why would you go to all the trouble of bootcamp and Windows when you could do it all on your current OS? Even some Windows users will tell you how frustrating it is to get RSD lite working on some machines. Works great on my netbook with Win7 Starter, but my main Win Vista 64 bit wouldn't do it no matter what.
For OS X, you just need:
sbf_flash
moto-fastboot-osx
Use the International Pudding thread as a guide to unlocking your bootloader. Once you've done that, the subject of root is almost moot because most ROMs are already rooted, you only need to install superuser.
Click to expand...
Click to collapse
Awesome. I wasn't aware that there were OS X versions now. I flashed very early on though, and never checked again.
And if you are looking for newer ROMs, I highly recommend Ninja ROM, which is my favorite of the bunch that still retain all of the Blur applications.
... Or CM7 pre-beta 2, which breaks the camera in most apps that use it. Pre-beta 1 ruined my battery life, but beta 2 is just fine. If you go this route and still want to use the camera, Angel Camera on the market works.
Thanks again Maledyris,
I did get it from the international house of Pudding thread so it must be the right one.
I found this thread http://forum.xda-developers.com/showthread.php?p=16853634#post16853634
They are talking about the motorola defy.... do you think that 2.2.2 will work with the Atrix too?
Dragula, can you give me some links for those ROM's you're talking about? I would like to use the camera still I think!!
cheers!!
ok heres the latest, my Atrix has gone in for a repair. It had some serious reception issues and after a week of arguing with telstra they're going to have a go oat repairing. it. Basically it show lower signal strength than many other phone. If you're here Aus you'll know Atrix is supposed to be "blue tick" well this one certainly wasn't.
Anyway my rooting plans are on hold till I get the phone back...
any chance of those links dragula?
Are you still around Maledyris?
I got my phone back and it's no different, so I'm ready to get started. I've read through your instructions again, and tried to find an answer elsewhere in the forum, but I'm still confused about how to flash CWM recovery the bootloader is unlocked. There seems to be so many files and I'm not sure which are ok for my telstra atrix.
I saw I can download CWM from the market, is that what I need to do next? but you said flash CWM so I'm guessing not the market...
I've downloaded recovery-en-goapk-0630-1029.zip but I'm not sure exactly what to do with it??
Thanks again,
nick
Hi Nicholox;
I am in he same boat as you. I am about to get my first Android Phone (looking at the Atrix) and have been doing some serious reading about bootloaders/rooting and ROMS.
How did you unlock your bootloader?
Now to answer your question on CWM. From what I have read you can download and install ROM Manager from the App Market and then use the ROM Manager to install CWM.
I am pretty sure thats right. Someone please correct me if I am wrong.
Just check out these intructions from Maledyris... I'm not sure if my phone will boot up to access the market after flashing the sbf and unlocking it. anyone know the answer to this?
maledyris said:
Okay, well first of all, you need to flash the unlockable bootloader:
1. Turn off your phone, then hold the down volume button and tap the power button. The phone will start up with a cycling menu that initially says, "fastboot".
2. Press volume down several times until it says, "rsd". This is the mode you want to be in.
3. Press volume up to select this mode.
4. Open up Terminal, cd to where your files are and type:
Code:
./sbf_flash IHOP_Bell.sbf
5. Reboot your phone and hold down the volume button again. This time you want to be in "fastboot", so when it comes up, press volume up.
6. From Terminal, type:
Code:
./moto-fastboot-osx64 oem unlock
Use the 64 bit or 32 bit version of the commands depending on your system. If you're on Lion or have a pretty new computer, it'll be the 64 bit one.
It will tell you to type in that command again, but this time along with the id they've provided. Take a look at the screenshots in the Pudding thread, they basically show this step, but in a Windows command prompt. It's the same thing.
7. Reboot your phone:
Code:
./moto-fastboot-osx64 reboot
Now you can flash clockwork mod onto the recovery partition with moto-fastboot-osx also. The ORFR 2.3.4 thread has some good examples and instructions on general flashing. The gobstopper threads also have some recovery files and instructions you could use to start off. Once you've got recovery installed, you're pretty much in the clear. You can softbrick your phone, but with recovery it's easy to get back to a working state.
Good luck!
Click to expand...
Click to collapse
ok this doesn't seem to be going so well. I finally psyched myself up to unlock my atrix and i'm stumped at the first step.
Nicks-MBP:Atrix Nicholox$ ./sbf_flash int-fix-try1.sbf
-bash: ./sbf_flash: Permission denied
Why do I get a permission denied when I try to flash bell IHOP?
thanks,
Nick

[q] a noob's quest to unlock 2.3.4

sorry if i am asking a question asked for too many times already,but i can't seem to find a solution to my case,or either the thread is no longer active since the TS did not update his results,thus making me confused if he hassuccessfully or unsuccessfully rooted his atrix
i'm using atrix mb860 ofw 2.3.4.and i'm trying to install neutrino 2.2 rom gt
so here are what i had done until now:
1.rooted my atrix using Pete's One Click Root : http://forum.xda-developers.com/showthread.php?t=1258599
2.installed titanium backup and backed up batch of everything.superusered.
3.Installed cwm from market and got superusered.
4.flashed cwm recovery for atrix 4g
5.tried to install romracer using cwm.selected to restore previous roms and also chosen both wipes but failed.atrix reboots and shows "failed to boot , starting rsd mood"
what my concern is about,is just "rooting" enables me to already install roms?if it does,what did i do wrong in my steps?if it does not,please show me the way.i do not know if i should or should not flash my sbf files and bootloader
also,i read that to show that my atrix is rooted,it shold show at the top right corner during boot.but i don't see any
please help me because i really don't know what i'm doing here.i'm still new and the guides provided by the developers are for experienced people.it does not provide the detailed steps.also,please do explain some of the terms used like what is the difference between rooted and unlocked devices.
if you are too tired to explain everything all over again,then just give me the required links.i'll learn my way.btw,if you are able to give me a working link,and updated threads that would be very hopeful since some don't re-edit their first post,thus needs us to find the answer in a 1000++ replies
thank you in advance
You need to unlock your bootloader. The text you're referring to in the upper left corner of the Motorla screen is "unlocked" and it only appears after you unlock.
You can do it manually. See here.
Or automatically. See here.
You CANNOT install a CWM without unlocking your bootloader first. Rooting does not let you install ROMS, unlocking the BL does.
thanks for the reply.so that's what i'm missing.is it necessary to flash my sbf?and since neutrino rom gt changes my kernel(i think).
so after unlocking my bl,i can then install romracer->neutrino then?i'll update again and see what happens
graphidz said:
thanks for the reply.so that's what i'm missing.is it necessary to flash my sbf?and since neutrino rom gt changes my kernel(i think).
so after unlocking my bl,i can then install romracer->neutrino then?i'll update again and see what happens
Click to expand...
Click to collapse
Yes, the pudding unlocker is a small 10mb sbf file. After flashing that with RSD, you'll run the fastboot oem unlock commands.
The kernel (boot.img) is completely different from the bootloader. (if I'm reading your ? correctly).
Correct: Unlock BL>install romracer CWM> BACKUP! > install your ROM of choice
okay,this is starting to get on my nerves.i went to pudding,then scrolled down to "RSDLite/Windows Drivers/Sbf_flash"->go to hxxp://goo.gl/vfUXc link->tried but failed as it's for at&t.mine is international then.just great!
went back topudding's thread.read again..."unlock"...YES!solution for international phone!heck,this is an sbf file,what am i going to do with an sbf file?if it's just copy and paste,that will be easy.
ok,so what i really need now is a real solution to an international atrix and not at&t's atrix.or is there actually another thread for just international atrix?i just don't understand at all.please help
http://www.youtube.com/user/TheSmokingAndroid
Ck the earlier videos that he has posted on unlocking the atrix, helped me quite a bit.
FINALLY DID IT!now to install neutrino gt!thanks for all your help guys!.this guide was indispensable:
hxxp://forum.xda-developers.com/showthread.php?t=1302423
a new question : how do i install romracer?the guide did say to install itbut i don't see the app?
nvm,finally able to install neutrino.thanks a lot guys!now where's the close thread button...
no wait,again another problem!i wanna ask at neutrino's thread but this stupid 10 posts rule is preventing me.so i need to ask here.after installing neutrino,my internal memory is left with 2gb only.where is the other 8gb?when i plugged into usb,i did find them.
to note,i used cwm to install neutrino gt.the zip file was in internal.does that have anything to do with it?any way to get it back?do i need to flash neutrino again?if so,please teach me
also,how to get the market back?

lg l9 p769 - droid 4.0.4 - i'm lost, could use help, linux user

i have been seeing a lot of threads about rooting this phone, but, they all have windows scripts, even the thread that is said to have a runme.sh does not have it in any of the links that i unzipped - only a runme.bat, but yet, people keep mentioning a runme.sh in it... also, i really don't see any one lying out the steps for doing this with linux.
i'm a noob, and dont really know much about this stuff, but i've done this ONCE before with a galxy exhibit, but it was very easy, i just copied a file to the phone (stock rom?), rebooted into recovery, told it to recover from that file, and i was done.
i have no idea how to do it with my new phone, and so i'm wondering:
1: where can i find the files i need to do this with linux - i just want root, nothing special
2: where can i find the steps necessary to do it - in the easiest manner possible?
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
any help is appreciated.
sentientsystem said:
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
Click to expand...
Click to collapse
Your phone is running ICS 4.0, that is the version which it shipped with. Pretty much everyone on here has upgraded to JB either with software update on the phone or they have manually updated with the offline KDZ flash method.
I dont have any experience in linux so I cant help. I hope you can get your phone rooted!
Sent from my LG-P768 using xda app-developers app
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
sentientsystem said:
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
Click to expand...
Click to collapse
You would need wine and then set it up...
Sent From My Xperia Themed P769
well, i tried that "LGpwn" and it didn't work, as well as a fake lg-recovery app. i figured out that i've got a "10g" phone (P769 V10G ICS). i'm not sure what the next step is. some one mentioned downgrading to JB... is there some where you can point me to for that???
i've GOT to get this t-mobile junk off my damned phone... i've even TRIED to install cyenogenmod, but i can't figure out how to get my phone to go into recovery mode (NOT factory rest) - i've tried volup+power+home and volup+power, and neither seem to be working.
Setup a sandbox, windows xp. LG uses windows, no other way to root as of right now for the t-mobile version.
Sent from my LGMS769 using xda app-developers app
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrade to a samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
sentientsystem said:
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrad to an samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
Click to expand...
Click to collapse
Option #1
If you are rooted on stock T-Mobile 10e or 10g ROM and have the CWM installed from this thread:http://forum.xda-developers.com/showthread.php?t=2095825 follow my instructions.
Place one of these CWM ROM images on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2136204
Place this JB radio firmware from T-Mobile 20d ROM on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2256350
Power off the device.
After power on the back/menu capacitive buttons will flash repetedly. Press Volume down while the lights are flashing and the phone should go into recovery.
Flash the ROM first.
Flash the radio second.
Reboot.
***Notes***
1.) 20d is the latest T-Mobile, 21b is the latest Wind Mobile. Both work.
2.) 21b is lighter/faster but has no wifi-calling.
3.) 21b will require you to manually enter your APN settings for cellular data and MMS. Be sure to write down your APN settings before flashing this ROM.
4.) Some users say battery life sucks on JB. I notice that 21b is better on battery life than 20d.
Option #2.
In Linux install a Windows VM and follow the standard instructions here:
http://forum.xda-developers.com/showthread.php?t=2173465
Use KVM with a GUI or even easier use VirtualBox.
I'm a die hard linux geek too. I even run linux at work while all of our msp software was written for windows. You are better off just running an old copy of xp inside virtualbox trust me its just easier that way. You can use adb if you like (its the same thing the windows users use in their batch files and just rewrite the bash script, but you will save yourself lots of headaches just using virtualbox. -- my .02
Sent from my LG-P769 using xda premium
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
# what's the difference between unlocked boot loaders and being rooted?
# do you have to unlock the bootloader to get root access?
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
My bad. I should have read through your original question all the way before posting. I see that you are not rooted.
If you are on 10e ROM you can root in Linux:
http://forum.xda-developers.com/showthread.php?t=1990705
It will require rewriting the batch script as a Linux shell script. It is possible but nobody has done it yet.
If you are on 10g you will need Windows. I have also answered your questions below.
sentientsystem said:
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
It allows you to boot an un-signed kernel. You can boot custom ROMs basically.
# what's the difference between unlocked boot loaders and being rooted?
Root allows you to `su -` to the root user and own the whole system.
# do you have to unlock the bootloader to get root access?
No.
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
Click to expand...
Click to collapse
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
sentientsystem said:
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
Click to expand...
Click to collapse
Welcome!
I know that a long time ago when I ran VirtualBox in Ubuntu there was something I had to do to allow USB access to the VM.
Here are the current instructions directly from Ubuntu:
https://help.ubuntu.com/community/VirtualBox/USB
Good luck.
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
sentientsystem said:
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
Click to expand...
Click to collapse
Yes you can flash a pre-rooted image. They are available. Use the search?
I posted instructions on the first page showing how to boot recovery.
that's great news - that's all i really needed - i didn't see them before, at least, not conspicuously, but i'll search around again.
and, i must have some how missed your instructions, i'll look again.
thanks!
kevev said:
I posted instructions on the first page showing how to boot recovery.
Click to expand...
Click to collapse
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @everyone for your help.
sentientsystem said:
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
Click to expand...
Click to collapse
I've decided to help you out This page will give you some more info on the P769 and several kdz (roms) for the P769
The fastest way to root is to flash the V21B kdz (this is the Jelly Bean version for Canada) using this guide, http://forum.xda-developers.com/showthread.php?p=36351786
The reason why you want this rom is because it has a vulnerability that is easy to exploit with Jcase apk
Once your followed everything (and rooted), install Super Su and Busybox
Next install artas182x second init CWM (in case you can't find it on his page, the link is here )
Note: you will see blinking led lights when you see the LG logo (booting up) appear after a couple of seconds. To enter the CWM press the vol (-) when the lights start flashing.
After you installed Artas182x CWM you can recover from someones clockworkmod backup.
following info from Cmahendra's thread
Note: only restore CWM backups from P769 versions or MS769!!!!
Or check out the V10B (MetroPCS "JellyBean") CWM backup
Now the only 2 reasons to unlock the bootloader are:
1. Install a safer and better CWM
The reason why is because Artas182x CWM is a second init (bootstrap), so if you mess around with a busybox apk and something goes wrong or you remove a file that is required (for CWM), it will stop operating. You will have to reflash the kdz or fix what you changed to get it working again.) I've had this problem several times while messing around with different busybox apps and etc.
2. Custom roms
(which you stated you are not looking for) not worth talking about right now.
Answer to questions
The only pre rooted roms are clockworkmod backups, lol
The default recovery is useless to us (unless you feel like solving the problem)
Flashing back and forth (ice to jelly) comes with risk, the program used on Windows to flash is buggy at times. The best way (in my opinion) is to flash only when really required and mostly restore from clockwormod backups. The device is actually hard to hard brick, but it will require at lot more knowledge to get your device running again.
---------- Post added at 07:23 PM ---------- Previous post was at 07:16 PM ----------
sentientsystem said:
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @all for your help.
Click to expand...
Click to collapse
So what version are you on right now
Ice? Jelly?
i'm still on ICS for the moment. still trying to understand what i need to do next. re-reading your post for the 2nd time, and all the threads it references. making sure i don't screw any thing up. thinking about upgrading to JB, and trying this CWM. and looking into this "cyanogenmod" some more, to understand why i never see any one on this site mention it, and what all these "other roms" are about. lmao, like i said, i'm way new to this . it's a lot to take in, even for a web developer .
thanks \m/ (>_<) \m/

Trying to root htc m8

I have an at&t variant HTC m8, I recently stitched to cricket wireless. SIM swap went fine. I've been wanting to gain root to remove att bloatware. I'm on android version 5.0.2. My main issue is I've gotten nowhere unlocking boot loader using a pc. Tonight I resorted to using kingroot from Google play,which worked on third attempt. However supersu said it needs an update.
So basically I'm lost and trying to find away to gain root without a computer if possible.
I've never used kingroot. What happens if you try to update the root binary?
May be a bit irrelevant. I think you'll need to unlock the bootloader to do what you want (delete bloatware). I don't think kingroot alone will get it done. Reason being, you can't modify the system partition with root alone. You need kernel mod wp_mod, which is flashed with custom recovery TWRP. And you need an unlocked bootloader to flash custom recovery.
What issues did you have exactly when trying to unlock the bootloader?
I believe my main issue was that my pc is out of date running an unauthorized widows 7 lol. I was unable to obtain adb or any twrp files to unlock boot loader hence my attempt at a one click type solution. I think I'm going to read up more and try the whole process over this weekend, but any tips guides or instructions would be helpful. The more I have looked into this the more conflicted things have become.
Lewis715 said:
I was unable to obtain adb or any twrp files to unlock boot loader hence my attempt at a one click type solution.
Click to expand...
Click to collapse
Not sure what "unable to obtain adb" means if you don't explain what happens exactly, where you are trying to get the files, etc. So all I can do is assume, and hope that I don't suggest you do things you already tried.
If you want an adb/fastboot installer, the following should work, and decently up to date: http://forum.xda-developers.com/showthread.php?t=2317790
Otherwise, there are other adb installers if you just type "easy adb" into the XDA search function.
No such thing as TWRP files that can help you unlock the bootloader. By definition, you can't install custom recovery until the bootloader is unlocked, and TWRP is a custom recovery. So nothing can be done with or by any TWRP files until you unlock the bootloader.
Lewis715 said:
I think I'm going to read up more and try the whole process over this weekend, but any tips guides or instructions would be helpful. The more I have looked into this the more conflicted things have become.
Click to expand...
Click to collapse
Again, can't really help with what is "conflicted" unless you give some specific details.
Its understandable that a lot of the threads may be confusing, as the info is often outdated. This is getting to be an old device, and a lot of folks that wrote the various guides have moved on, and not updating the guides.
The following is a pretty good AT&T specific guide: http://forum.xda-developers.com/showthread.php?t=2799796
But as mentioned, some things are outdated:
1) The driver package is old. You can get updated drivers by downloading HTC Sync from the HTC website. After installing (which will also install HTC drivers) you can uninstall Sync, but keep the drivers; if you don't want Sync (but I haven't had any problems keeping it).
2) I believe the Dropbox link for adb installer is dead, but I already gave an alternative above.
3) The TWRP version is really old, don't use it! Get TWRP 3.0.2 from here: https://dl.twrp.me/m8/
The exception might be in the stock Android version on your phone is old, but if you tell me what it says for OS number on the bootloader screen, I can advise more specifically.
4) TWRP version is old, again, don't use it! v2.76 is the latest "stable" version, and you can get it here: https://download.chainfire.eu/969/SuperSU/UPDATE-SuperSU-v2.76-20160630161323.zip
Everything else in the guide should still apply.
Vomer's guide is also a good one:
http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Again, the TWRP version is out of date (use the current one linked above).
You only need to do Sections 0 and 1, as the remainder of the guide (S-off, SuperCID) doesn't apply for what you are doing (unlock bootloader, custom recovery, and root).
Also, highly recommended to make a TWRP backup of the stock ROM, before you root.
After root, flash wp_mod with TWRP to enable system partition changes to stick (and deleting bloatware is a system change). What wp_mod depends on your Android version. But for Marshallow, the wp_mod can be found here (you just need the zip wp_mod, not the whole ROM): http://forum.xda-developers.com/htc-one-m8/development/rom-stock-unlocked-developer-sense-7-t3262894
Thanks for the help I'll give it another try, honestly have no real need to mess with device. I know the phone is old but I still have it and it works better than others I've had.
Lewis715 said:
Thanks for the help I'll give it another try, honestly have no real need to mess with device. I know the phone is old but I still have it and it works better than others I've had.
Click to expand...
Click to collapse
Of course, the vast majority of us don't have any real need to mess with the device. But we do, nonetheless!

Categories

Resources