Tried to install Foliomod 1.4 on my Toshiba Folio.
Seems to be succesfull but the device identifies as a samsung SGH-T849 device...
Folio acts now a bit like a mobile phone...
(specefic phone icons etc)
Original specs:
Kernel Version: 2.6.32.9
Build Nr: Toshiba_Folio_and_A.5.0131
Specs after foliomod 1.4:
Kernel Version: 2.6.32.9
Build Nr: Dexter's Foliomod v1.4
Anybody any sugestions?
Dzingo said:
Tried to install Foliomod 1.4 on my Toshiba Folio.
Seems to be succesfull but the device identifies as a samsung SGH-T849 device...
Folio acts now a bit like a mobile phone...
(specefic phone icons etc)
Original specs:
Kernel Version: 2.6.32.9
Build Nr: Toshiba_Folio_and_A.5.0131
Specs after foliomod 1.4:
Kernel Version: 2.6.32.9
Build Nr: Dexter's Foliomod v1.4
Anybody any sugestions?
Click to expand...
Click to collapse
Hi,
This is expected behaviour. The SGH-T849 identifies it as a Galaxy Tab. This helps to open up more apps in Android Market. At the point of release, I believe Dexter selected a profile which most closely resembles the Folio and so, Galaxy Tab it is!
Cheers.
~wonger
Related
I purchased a generic Tablet running Android for my wife about 4 months ago. She hated it and we were able to get an HP TouchPad cheap, so she is using that and I got the Android Tablet.
It runs slowly and I would like to do some modifications to it. I have searched for hours trying to figure out what I have and where I can go for advice, ROM's, etc, but I can't find anything specific to the device. It's one of those Chinese "knock offs". I do have the following info:
Model #: Android for Telechips TCC8900 Evaluation Board
Android Version: 2.3.1
Kernel Version: 2.6.35.7-tcc [email protected]#12
Build #: full_m57te-eng2.3.1 GRH778 20110414.162501 test-keys
Also, it shows as a "haipad" in windows explorer when I set it up as USB connected to my windows XP computer.
I'm looking to root it, and then possibly a new ROM & Kernel so I can overclock it (it's really slow @ 800Mhz).
If anyone can point me to the correct site/post, I would be VERY grateful.
Hello all,
I bought an a-pad/e-pad which came in a Superpad 3 box. Upon research it is a very hard device to locate. I am looking to root it and install a custom rom to speed up and customize the device (as we all do).
I also understand there is not much development but surely there must be one person that can point me in the direction? There is 2 roms I found for a similar device the Flytouch but I am uncertain that the rom will work on the device.
The roms I have found is Tim6a and Axlien
About Device
Model Number: Android P1001R
Android version: V2.3 2011-12-07 (001112)
Kernel Version: 2.6.32.9 [email protected] #232
Build Number: FRF85B
I downloaded the "Device Info" app to see more of the details. This is what I got:
Hardware
Manufacturer: Unknown
Model: Mercury
Hardware: imapx200
Board: Unknown
Device: Mercury
Brand: Generic
CPU: ARMv6-Compatible processor rev 5 (v6l)
Software
Android Version 2.2 - Was advertised with 2.3 !!!
Bootloader: Unknown
Unfortunately this sounds like it is a clone. The apads that I know of are all ARMv7 compatible processors. That and the fact that the About device lists the version as V2.3 2011-12-07 which would be GB but yet it is truly 2.2 just changed to say 2.3 and probably skinned to look and act a little like GB.
Hello guys, A while back I bought this tablet Its branded "NozaTech" but over time its become sluggish and seems to be infected with advertising and some sort of malware.. Its even at the point where applications keep crashing and google play wont install anything else. I think it was shipped with a dodgy ROM, How would I go about finding what custom ROM that is compatible with this device? as I think it needs a complete wipe and a new spark of life. Also how would I go about installing it?
Model Number: V11
Processor Type: RFY-A33
Android Verison 4.4.2
Firmware Version: v2.0
Kernel Version: 3.4.39 ([email protected] #185
Build Number: RFY_y3-eng 4.4.2 KVT49L 20141015 test-keys
Many thanks.
SM91337 said:
Hello guys, A while back I bought this tablet Its branded "NozaTech" but over time its become sluggish and seems to be infected with advertising and some sort of malware.. Its even at the point where applications keep crashing and google play wont install anything else. I think it was shipped with a dodgy ROM, How would I go about finding what custom ROM that is compatible with this device? as I think it needs a complete wipe and a new spark of life. Also how would I go about installing it?
Model Number: V11
Processor Type: RFY-A33
Android Verison 4.4.2
Firmware Version: v2.0
Kernel Version: 3.4.39 ([email protected] #185
Build Number: RFY_y3-eng 4.4.2 KVT49L 20141015 test-keys
Many thanks.
Click to expand...
Click to collapse
Find your device thread on xda, all supported roms for your device would be listed there
Hello,
Recently i got a RoHs P900 tablet. Not the best quality but it works.
My problem is that i can't move all manually installed apps to the sd-card so i need root access.
Can anyone tell me how to root this device?
I have allready search this (and other) forum; can't find it.
Model: RoHs P900 (Alibaba?)
Processor typ: dualcor-A23
Android version: 4.4.2
Firmware version: 4.4v2.0
Kernel version: 3.4.39
Build number: polaris_p1-eng 4.4.2 KVT49L 20150130 test-keys
bjk said:
Hello,
Recently i got a RoHs P900 tablet. Not the best quality but it works.
My problem is that i can't move all manually installed apps to the sd-card so i need root access.
Can anyone tell me how to root this device?
I have allready search this (and other) forum; can't find it.
Model: RoHs P900 (Alibaba?)
Processor typ: dualcor-A23
Android version: 4.4.2
Firmware version: 4.4v2.0
Kernel version: 3.4.39
Build number: polaris_p1-eng 4.4.2 KVT49L 20150130 test-keys
Click to expand...
Click to collapse
You can try some methods mentioned here- http://www.xda-developers.com/root/
Cheers,
AJ
Thank you, i will look it to that...
Rohs P900 ROM
bjk said:
Thank you, i will look it to that...
Click to expand...
Click to collapse
Hello, I recently obtained one of those myself (Rohs P 900). I don't think the root access will be a problem, but i would like to put in a lighter OS. I plan to use it as an electricity domotics controller indoors only.
Any hints or tips or pref links to what would be a good operating system ROM to use?
Thanks in advance
So my S3 cannot download anything from google playstore. I have tried everything I can to solve it, no help.The error it displays is always the same: error retrieving from server.
Here is the information for the device: MODEL NUMBER: Z15A
Android version: 4.0
BAseband version:MTK6517 1,2G Cortex A9 Power VR SGX531 Camera 500W LCD 380x854
Kernel version: 2.6.35.7 [email protected] #5
Software version: Z15A_20121221_T300_MLB1_F1BOM_V6.7.8
Hardware version 1.1.0
the phone became supersu and rootexplorer preinstalled and has android market and another android market.
That is a cheap chinese copy. Unfortunately i cannot support that device. All i can tell you is be careful rooting it as you will most likely brick it and there is no support for that device, especially a broken one.
As for google play.. Reinstall the framework apk and remove any 3rd party apps that interfere with it. Like the ones that claim to give free paid stuff..
I wish I stole my HTC M9.
Claimmore said:
So my S3 cannot download anything from google playstore. I have tried everything I can to solve it, no help.The error it displays is always the same: error retrieving from server.
Here is the information for the device: MODEL NUMBER: Z15A
Android version: 4.0
BAseband version:MTK6517 1,2G Cortex A9 Power VR SGX531 Camera 500W LCD 380x854
Kernel version: 2.6.35.7 [email protected] #5
Software version: Z15A_20121221_T300_MLB1_F1BOM_V6.7.8
Hardware version 1.1.0
the phone became supersu and rootexplorer preinstalled and has android market and another android market.
Click to expand...
Click to collapse
Be careful with your device cause looks like an unofficial s3.
I know the fix for it read this:
http://forum.xda-developers.com/showpost.php?p=59916921