I have an Atrix MB860 with system version 4.1.8.3.MB860.ATT.en.US. I settled for this version because apparently I can't recall which of the post on this forum has the retail non-branded system version.
I did previously download it but now I mistakenly deleted from my computer. I have searched in vain but can't recall what i did type prior to getting that image!
I can't recall which of these images it was:-
sbf
img
Could someone please point me in the right direction.
Thanks in advance.
My present setup:
Unlocked bootloader
Rooted
Build numberlympus_htw-userdebug 2.3.4 4.5.2A-5_OLH-3110614 test-keys.
Non-branded...? If you want a retail ROM for the ATRIX, it's going to be a branded one; there really is no such thing as a "stock" or "barebones" Android ROM for this phone, if that's what you had in mind.
Sent from my ATRIX running CherryBlur 1.2
Related
I'm requesting a Rogers 2.3.2 FTF file to use with the flashtool.
There was a 2.3.3 update one posted already, but there are none for the original.
Basically, my phone was screwed, factory reset didn't work, only thing that fixed it was flashing the ftf for 2.3.3, but now I'm stuck with no root. I do use the Rogers apps, and the UK generic obviously doesn't have them.
I'm hoping someone with the required knowledge could make a 2.3.2 for those of us who want to root first, then update with OTA, with the Rogers software included. I'm sure I'm not the only one who wants to have 2.3.3 with root, and not be stuck using the UK generic.
If someone knows how to get the Rogers apps (like the "My Account" one) working in the UK generic, then I'll try that instead.
Much thanks in advance.
EDIT: Screwed up on the thread name and forgot to write what the request was. I apologize for that.
UPDATE: Turns out the Rogers apps are downloadable in the Android market. Would still like the official version though.
can u unlock bootloader on Rogers branded phones?
if yes then u can use the prerooted kernel i have posted here:
http://forum.xda-developers.com/showthread.php?t=1176502
Rogers phones are locked. We are hoping for a method to unlock our bootloaders
Hi all
I have a unlocked bootloader Atrix, within GB 2.3.4 4.5.91 ATT us, N_01.86.00R, and 2.6.32.9 installed. It works but I have so many trouble with it.
Can I safetly go back to Motorola Software Update, and get officially once again my Orange French Stock Froyo 2.2!?
(any real "YES" will be greatly appreciated!!)
osx67 said:
Hi all
I have a unlocked bootloader Atrix, within GB 2.3.4 4.5.91 ATT us, N_01.86.00R, and 2.6.32.9 installed. It works but I have so many trouble with it.
Can I safetly go back to Motorola Software Update, and get officially once again my Orange French Stock Froyo 2.2!?
(any real "YES" will be greatly appreciated!!)
Click to expand...
Click to collapse
Don't do this before someone else says it's okay, because I'm not totally sure, but you should be able to SBF flash your device back to original everything.
Thank you. In fact I don't want to use any more other SBF file, but just get my stock directly from Motorola Software Update!!
I hope I'm not too late.
DO NOT DOWNGRADE!!
You'll get yourself a hard brick. Seriously, it's stickied all over the forum.
You cannot use SBF, you cannot use Motorola Software Updater.
I repeat, YOU CANNOT DOWNGRADE FROM 4.5.91 YOU WILL BRICK YOUR PHONE
Do as you please, but you have been warned.
So no way to get back? So bad...
Can I at least flash back with Recovery to a retail Froyo 2.2?
Am I no more allowed to official stock, or in future I'll be able to get get Motorola's official update?
osx67 said:
So no way to get back? So bad...
Can I at least flash back with Recovery to a retail Froyo 2.2?
Am I no more allowed to official stock, or in future I'll be able to get get Motorola's official update?
Click to expand...
Click to collapse
By stock I thought you meant the newest firmware stock! my bad. Yes, DO NOT SBF DOWNGRADE. You WILL brick.
Use fruitcake if you want froyo but I have no clue if theres a fruitcake france release. You may be SOL here.
http://forum.xda-developers.com/showthread.php?t=1350390
read post 2 by shaydar.. maybe this could help, just try download the newer sbf (2.3.4) then desbf it..
do not use froyo, that the best method i know for now
Thank you everybody for your cautions!!!
I didn't get back to stock 2.2. I installed this pretty CM7 and I'm quiet satisfied.
But I want to know: with my atrix unlocked with RDSLite + CM7 installed, am I allowed one day to get official 2.3 or Ice Cream with Motorola Updater Software when Motorola will make it happens!??
Hi all,
First post but long time reader. I need to re-flash the original telstra software onto my atrix to return it for a warranty claim (camera, light and proximity sensors dead).
I'm unlocked running darkside rom, system version 4.5.133.MB860.ATT.en.US
Is there a way to go back to the telstra software so they won't think i've messed with the phone? Can i install the OLYEM U4 1.4.2 software or will this brick my phone?
Thanks in advance... i've searched and searched for hours now and can't find any helpful threads
As long as you didn't do the ota you can sbf froyo without getting a hardbrick and it gets rid of the unlock text but not the unlock and that should be fine
Well I'm not really sure if it was updated to GB via OTA. I bought the phone a month old on ebay, and bl unlocked it and installed darkside the day i got it, although i think it was on gingerbread. so that means i can't install the froyo sbf?
Try the gingerbread sbf just incase it is the ota it should work but I know for sure the froyo one does but you don't wanna risk it but it is safe to sbf gingerbread you just can't downgrade
---------- Post added at 02:01 AM ---------- Previous post was at 01:24 AM ----------
just did some research for you and flashing stock gingerbread sbf does remove it
Okay so im guessing theres no telstra version gingerbread sbf for the atrix available because the only one i can find is froyo. I suppose i'll just install a different stock gingerbread rom then.
I just found that there is a sbf of telstra gingerbread available, however filesonic files are unavialable so i can't download it anymore. Does anyone have the following file on their computer, and if so can they upload it somewhere i can download it from?
1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-20-release-keys-signed-Telstra-AU.sbf.gz
would be much appreciated
If you're still looking, this thread might help http://forum.xda-developers.com/showthread.php?p=19029481
Hello friends! My first post here on the forum I apologize if I posted in the wrong area!
I purchased a 4G Atrix germany version 2.2.2, I would be the upgrading to 2.3.4, but do not know which version I install, the MSU is not updated and has even tried to contact via email to motorola how to upgrade to 2.3.4 and not getting a solution.
I wonder if I can upgrade to the android version 2.3.4 to 4.5.91 of AT & T without causing a brick. Need to upgrade it to the original motorola because I intend to sell it.
I thank you if someone can help me, thanks!
Sorry for my bad english by google translator.
AndreLP said:
Hello friends! My first post here on the forum I apologize if I posted in the wrong area!
I purchased a 4G Atrix germany version 2.2.2, I would be the upgrading to 2.3.4, but do not know which version I install, the MSU is not updated and has even tried to contact via email to motorola how to upgrade to 2.3.4 and not getting a solution.
I wonder if I can upgrade to the android version 2.3.4 to 4.5.91 of AT & T without causing a brick. Need to upgrade it to the original motorola because I intend to sell it.
I thank you if someone can help me, thanks!
Sorry for my bad english by google translator.
Click to expand...
Click to collapse
If you are using an international matrix, don't flash a AT&T software. It may cause a brick. Have you tried OTA update in the settings?
Sent from my undervolted, underclocked, power saving Motorola Atrix.
Use the official Updater!
Otherwise, use this sbf: http://mir.cr/PYJO7ZFR
I have been flasshing my Phone last week with that sbf!
If you want to unlock, unlock and then flash whatever you want only using CWM
Nevermind
I have a firmware question that I can't seem to find the answer to by searching. I am running arhd 11 on an att HTC one. Should I upgrade the firmware on my phone? Will there be any benefits to this since I am on att and not international? Also how do I go about updating the firmware and does it wipe the device? If I should upgrade, what it's the version I should download? Longtime Samsung user so please excuse the noobness.
If alls running well, then plz avoid ... however, in ARHD thread many AT&T users have updated the firmware without any side-effects
Best to post Q in that thread itself
asjshenry said:
I have a firmware question that I can't seem to find the answer to by searching. I am running arhd 11 on an att HTC one. Should I upgrade the firmware on my phone? Will there be any benefits to this since I am on att and not international? Also how do I go about updating the firmware and does it wipe the device? If I should upgrade, what it's the version I should download? Longtime Samsung user so please excuse the noobness.
Click to expand...
Click to collapse
It is currently not mandatory to flash the new firmware for ARHD, but it does provide a noticeable increase performance depending on the current firmware version you are running, I was running 1.26 on my AT&T m7 and the screen and touch buttons have been much more responsive now that I am running the new 2.24. Flashing the new firmware will also update the baseband, providing you with the latest radio (but performance of this will vary from region to region.
If you go to this link, it will give you some great instructions on the update process.
http://forum.xda-developers.com/showpost.php?p=42556698&postcount=24958
BTW, you will need to be s-off and change your cid to 11111111. As long as you take your time and follow the directions completely you will be fine. If you do update make sure you flash the firmware TWICE when it says to, and make sure you re-flash your custom recovery because it will get replaced during the updating process. This process will not delete your sd card and you will be able to run your current ARHD, but it is recommended to do a clean install after. And you might as well since 12.0 is out.
hope this helps
I'm getting a failed not allowed error when trying to 'fastboot flash zip'
I successfully have s-off and changed CID but can't get firmware to flash
Edit: not sure what happened but I was able to push the zip successfully. Maybe from adding the path of the file instead of just the zip file? Anyway, it worked.
Sent from my HTC One using xda premium
IF the rom is tweaked right theres no real reason to update the firmware to euro build,Id wait till att variant or the dev variant gets the update and then worry about it.