[Q] Help Please! Optimus V wont connect to the computer!! - Optimus One, P500, V General

my optimus v is rooted and has cm7 on it. It worked fine until today when i tried to connect my phone to my computer. When the "usb Mass Storage" icon shows up and i press mount, all it does is say "sd card can now be safely removed." It can only charge for now when connected. Here are all the steps i have tried to fix it,
*Tried different Usb Port
*Turned on/off debug
*Installed and Updated my Drivers
*Used apps for usb tether
*Reboot, Unmount
I haven't tried to reflash a rom but i dont think that will work. I haven't taken the sd card out and put it in the computer because i lost the micro sd reader. I do think that its the crappy stock sd card that came with the phone might be the problem. Anyone have any suggestions?

Related

After 2.1 Phone Reboots on USB Mount

I updated my x10 mini to 2.1 yesterday and now everytime i connect phone to PC
and click on Mount USB phone just restarts. Does anyone have the same issue?
although this is not a x10 mini thread, i experience the same problem (with my mini) after upgrade to 2.1. i wonder if it is not because you sync with "my phone explorer"... do you?
Android Commander
Use android commander to transfer files does not require putting into USB mount mode.
Or MyPhoneExplorer.
It used to do that back on the RF...014 firmware.
They seemed to like it so much, that they implemented it again!! lol!
*sent from my X10i
mine does it too. but it happens when i plug the usb cabel to the device so the software above won´t work..any solution?
When you connect phone to PC choose to "charge" after that choose "mount" no restarts
but it restarts just after i plug the cable into the device, i have no time to select one of these options
Have you tried connecting the phone with another computer, usb port or usb cable? If that doesn't work...
Have you tried connecting the cable without the sd card inside?
Try that, if it doesn't restart you know it's the sd card that's causing the problem. If you have an sd card reader (some laptops have them) put it in and copy your important files and format the sd card to fat32. You can also use the phone to format the card, but you will lose everything on the card.
Hope that helps.
thanks for your reply
but i had to flash my phone again and now i´m not having this problem anymore so far
Same thing happens to me too. Yesterday updated my X10 Mini Pro to 2.1, now the phone restarts, when mounted. I have tried on 2 computers (PC and laptop). Just now tried the suggestion to choose "Charge" and later "Mount" from status bar, seems to work
Actually, just now i remembered that this started happening not right after the update, but after i enabled Text-to-Speech or Speech-tp-Text or whatever it was. Will be trying to switch that off later.
for me the upgrade to 2.1 solved the problem...try to re-flash
Dentisst said:
When you connect phone to PC choose to "charge" after that choose "mount" no restarts
Click to expand...
Click to collapse
I use exactly the same workaround on my X10 mini pro. This bug started after the android 2.1 upgrade. I never had it before...
It happens only when I mount the SD on Win7 and not on Ubuntu Linux: Could it be a driver issue?
EDIT: btw the issue disappeared after i uninstalled the live wallpaper
Dentisst said:
When you connect phone to PC choose to "charge" after that choose "mount" no restarts
Click to expand...
Click to collapse
Thanks my problem is solved......CHEERS
Hi, i had same problem with reboot after mount USB so i tried to find solution. And in my case the soution was simple.
I have had set sound notification to SD card witch was save on S card..... Go to: Preferences>display and sound> SD card notification> "set OFF"
That solved my problem
PS: Sorry for my english
kindred7 said:
Have you tried connecting the phone with another computer, usb port or usb cable? If that doesn't work...
Have you tried connecting the cable without the sd card inside?
Try that, if it doesn't restart you know it's the sd card that's causing the problem. If you have an sd card reader (some laptops have them) put it in and copy your important files and format the sd card to fat32. You can also use the phone to format the card, but you will lose everything on the card.
Hope that helps.
Click to expand...
Click to collapse
im having a problem with my phone explorer...i reflashed my X10 to generic 2.1 in order to get the 2.3 firmware.
Now im busy syncing my phonebook from my laptop back to my X10 and it has somehow made a duplicate of all my contacts and is busy syncing that into my X10 now...how do i sort that out? i dont want every contact duplicated on my phonebook... pls advice
phone restarts when I mount usb pen drive to it!
My wt19i restarts some times when I mount pen drive. The mount buttun pressed and then screen turns black, then restarts. Please help me.
Try to move those apps which you use more frequently to PHONE STORAGE or kill their procces before you mount your USB...this helped me

[Q] Help Please! Optimus V wont connect to the computer!!

my optimus v is rooted and has cm7 on it. It worked fine until today when i tried to connect my phone to my computer. When the "usb Mass Storage" icon shows up and i press mount, all it does is say "sd card can now be safely removed." It can only charge for now when connected. Here are all the steps i have tried to fix it,
*Tried different Usb Port
*Turned on/off debug
*Installed and Updated my Drivers
*Used apps for usb tether
*Reboot, Unmount
I haven't tried to reflash a rom but i dont think that will work. I haven't taken the sd card out and put it in the computer because i lost the micro sd reader. I do think that its the crappy stock sd card that came with the phone might be the problem. Anyone have any suggestions?

CM7 States SD Card Removed after 3.5 update

Both my 32gb and 16gb give the following message after applying the 3.5 update. "Removed SD Card".
When I try to connect the TP with my computer I do not get the USB symbol. None of the programs moved to the sd card previously now work.
Please help.
BTW, when I boot into webOs and connect the TP to the computer via usb, all is well.
Hi,
Try this instruction.
When I disconnected the usb cable before i rebooted to CM7, it did not work. When I kept the usb cable connected for the reboot, it works fine for about 10 seconds and then once again says the the SD card is removed.
Running into this exact same issue.
I recently decided to move a majority of my apps (mostly games and larger files) to "SD Card" and am not sure if that is the cause for all of this. When I attempt to move the apps back to the "phone" I'm told that the apps can no longer be located (like they are stuck in some type of purgatory).
Any other suggestions besides that tutorial?
lanski007 said:
Hi,
Try this instruction.
Click to expand...
Click to collapse
Out of curiosity, where did you find this?

[Q] Help - GS2 connection to PC

All,
I've tried everything and I cannot get my PC's to recognise my GS2.
It's not even constant, sometimes I connect it via USB to the PC and it comes up as unrecongised device, other times it will detect as a camera as GT-i9100 (regardless of it I select MTP)... I've reinstalled Kiers I don't know how many times and have even manually installed the drivers but still no luck.
So I gave up with that as I only want to connect to Odin to get rid of this crap software. So I downloaded the CWM root package onto my SD Card and booted into recovery, went to apply the zip and it says it cannot mount /sdcard as not such directory exists?!?! Now I don't have an external SD Card but the .zip file is located on the internal storage in /sdcard/Downloads.
I have a Mac at home that allowed a connection into Kiers first time to update to stock ICS - should I just abandon this trying to connect to Windows and try and find an alternative to Odin for Mac?
Thanks for any help at all.
Dan.
but the .zip file is located on the internal storage in /sdcard/Downloads.
NO try copy pasting update zip file on root of SD card then try....
Edit : this rooting methed you can only try on ICS vesrions
Thanks ZACQ8.
I just thought I'd try another USB cable as a last shot, and OMG it started installing the drivers Still failed to install the Mobile MTP Device but it's getting there...
You have to use the same USB port when you connect your SGSII.
I noticed that if I plugged it into another port the phone would come up as unrecognised - this was all tested on a few PCs when the phone was on GB and connecting as an external hard drive.
I haven't tested if the problem still exists with ICS, as it do 'external hard drive'.
Seems like it was the cable all along...
Phone now recognised in Odin and Device Manager.
Pile of crap.

S3 ICS not asking me if i want mount USB when plug USB to PC?

Hello,
Stock ICS S3, It wont ask me if i want mount STORAGE once i plug the USB to PC.... It just directly start charging...
ideas?
Thanks!
rommark said:
Hello,
Stock ICS S3, It wont ask me if i want mount STORAGE once i plug the USB to PC.... It just directly start charging...
ideas?
Thanks!
Click to expand...
Click to collapse
There is no mount usb option in SGS3..it directly connects as MTP..
zoot1 said:
There is no mount usb option in SGS3..it directly connects as MTP..
Click to expand...
Click to collapse
I am on windows 8. how do I view the SG3 sd card files?
Thanks!!!
Use the popular SGS3 UMS App.
Ext SD Card reading is supported, you can't move files through internal sd card and Pc.
Use bluetooth for that.
I've had the same problem many times after changing and testing new ROM's.
You can restart your computer and phone - has worked for me before.
Change ROM - this has worked for me, seemed like a particular ROM didn't like my PC setup / drivers whatever and refused to connect!
Change cable - they don't last that long, I've had to replace 4-5 since my HTC Desire days - all that plugging and unplugging can bust them - they always still charged, but no PC connection.
Try a different USB port - You never know!
Uninstall the drivers on your PC for your S3 - reinstall - use the SDK drivers - or from KIES. I seen users report that the change between a ICS ROM and a JB ROM and vice versa can cause issues, not sure if applies to you.

Categories

Resources