I have just finished porting 2nd-init to the Droid X2. It was a clean port from the Atrix. I didn't modify the code, just compiled it. The work was in the install/wrapper.
This opens up custom ROMs, like CM7. This does not unlock the bootloader or allow custom kernels.
It has been tested on one Droid X2 so far. I recommend only developers play with this for now. It is not that useful be itself, but expect to see lots of new things happen based on this.
I welcome feedback. Also feel free to Donate via the "Donate to me" link under my username, top left, on XDA. Donate out of gratitude for this work, not for promises of future work.
I would like to give a special thanks to religi0n/relax. He stepped up to help me test 2nd-init, and worked with me across multiple days. Since I don't own a Droid X2, this wouldn't have happened without him.
Enjoy!
This apk requires SuperUser.apk to already be installed, and working. Ignore any references to the Atrix. This apk is custom for the Droid X2, but I didn't change all references to the Atrix in the apk. I will be working on an updated apk that doesn't mention the Atrix.
Steps for the apk:
1. Get it on the phone however you like
2. Install the apk
3. Open 2ndinit
4. Click Install
5. Click OK when the dialog comes up
6. Install Android Terminal Emulator from the Market
7. Open Android Terminal Emulator
8. type ls /sys/kernel/debug<enter>
This is only for Froyo. We know it breaks in it's current form with Gingerbread.
Thanks to religi0n!
Thanks to eval!
Thanks to Brandon15811!
Thanks to xfinrodx!
Thanks to xvilka!
Thanks to PAuly!
Thanks to Skrilax_CZ!
Thanks to BravoMotorola!
Thanks to NFHimself!
DOWNLOADS
2nd-init Droid X2 apk
Developers only:
Tarball
Info:
This method starts 2nd-init via mount_ext3.sh.
Warning! This conflicts with Tenfar's ClockWorkMod(aka CWM) Recovery
If the phone is wall charging, you shut down the phone, and start it, it will boot CWM
To avoid this, open System Recovery and hit Charge Mode.
It may also conflict with other recovery tools, or other things that tweak the normal boot process.
Tweaks:
/sys/kernel/debug mounted
Checking for successful installation:
ls /sys/kernel/debug
Good Output:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the Output is good, then Congradulations you have control over init now!
Great work Thank you
This is really great news. Now we just need someone to get cracking on the CM7 port.
Thanks for your hard work edgan and all testers!
Sent from my DROID X2
Great job.
Thank you. I'll throw u a couple bones Tuesday.
I can't seem to get it to work, I installed the App, installed 2nd-init, terminal emulator, typed in ls /sys/kernel/debug, pressed enter and then nothing happens
Sent from my DROID X2 using XDA App
juhde said:
This is really great news. Now we just need someone to get cracking on the CM7 port.
Thanks for your hard work edgan and all testers!
Sent from my DROID X2
Click to expand...
Click to collapse
I've started tearing apart CM7. I've been using part of the code of the X and part from the LG Star (which appears to be the only other tegra2 device available through the git repository).
Needless to say, I'm going to need some help. I have a git repository set up right now that will eventually hold what I'm working on, but like I said, without help, I'm kinda slow at this.
I do have the build and system props switched in and a few other things, but not much now.
dragonzkiller said:
I've started tearing apart CM7. I've been using part of the code of the X and part from the LG Star (which appears to be the only other tegra2 device available through the git repository).
Needless to say, I'm going to need some help. I have a git repository set up right now that will eventually hold what I'm working on, but like I said, without help, I'm kinda slow at this.
I do have the build and system props switched in and a few other things, but not much now.
Click to expand...
Click to collapse
Look into Atrix, it's tegra2 and I believe they already have a unofficial port for CM7. It may need minimal tweaking since nearly every hack for the X2 this far has been modified atrix stuff.
Sent from my DROID X2
KurioHonoo said:
I can't seem to get it to work, I installed the App, installed 2nd-init, terminal emulator, typed in ls /sys/kernel/debug, pressed enter and then nothing happens
Click to expand...
Click to collapse
Do you have Superuser.apk installed? Did it pop up when you opened 2nd-init?
Check for /data/two.log. If it is there, post the contents here.
juhde said:
Look into Atrix, it's tegra2 and I believe they already have a unofficial port for CM7. It may need minimal tweaking since nearly every hack for the X2 this far has been modified atrix stuff.
Sent from my DROID X2
Click to expand...
Click to collapse
Isn't everything atrix now 2.3.3? so wouldn't you need to work from old cm with out gingerbread... i hope i'm wrong
Yes, I have super user access, and no such file exists in my data folder
Sent from my DROID X2 using XDA App
juhde said:
Look into Atrix, it's tegra2 and I believe they already have a unofficial port for CM7. It may need minimal tweaking since nearly every hack for the X2 this far has been modified atrix stuff.
Sent from my DROID X2
Click to expand...
Click to collapse
Yeah you're right I saw that like 2 seconds after you said something. This is the address to my github. It is an almost direct copy of the Atrix one right now besides the system.prop.
https://github.com/dragonzkiller/cm7_device_motorola_daytona
That and a few changes to make it say daytona.
KurioHonoo said:
Yes, I have super user access, and no such file exists in my data folder
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
Same thing happend to me reboot and try again.
I rebooted and tried again, still getting no permission
Sent from my DROID X2
ericerk said:
Isn't everything atrix now 2.3.3? so wouldn't you need to work from old cm with out gingerbread... i hope i'm wrong
Click to expand...
Click to collapse
My girlfriend has a Huwaei Ascend and it has 2.1 on it, and supposedly it's upgradeable to 2.2. That being said there is an unofficial port for it for CM7 which as we know is 2.3.
ericerk said:
Isn't everything atrix now 2.3.3? so wouldn't you need to work from old cm with out gingerbread... i hope i'm wrong
Click to expand...
Click to collapse
Yes you're wrong
Sent from my DROID X2
juhde said:
Yes you're wrong
Sent from my DROID X2
Click to expand...
Click to collapse
Goood!! can't wait to see some cm7
Can someone please comment on how 2ndinit compares to the "Droid X2 System Recovery" originally Posted c21johnson in terms of function?
My understanding is that ROMs etc could be flashed with the Recovery, so is 2ndinit simply an alternative method to flash ROMs? Can 2ndinit also function as a recovery method as well?
Or is 2ndinit something completely different altogether?
Thanks!
ricovox said:
Can someone please comment on how 2ndinit compares to the "Droid X2 System Recovery" originally Posted c21johnson in terms of function?
My understanding is that ROMs etc could be flashed with the Recovery, so is 2ndinit simply an alternative method to flash ROMs? Can 2ndinit also function as a recovery method as well?
Or is 2ndinit something completely different altogether?
Thanks!
Click to expand...
Click to collapse
Nothing personal, but you may be over your head in this particular forum. The developer forum is pretty technical. By all means, read it and follow it, but asking "entry level" questions might get you flamed around here. I don't think it's right, I'm just trying to save your feelings a bit. Once things get a little more fleshed out and "prime time" someone will post a nice set of instructions for the average user in the General forum. I've been sufing the forums for 2 years and flashed many many roms and kernels on my last phone, and I don't know what the heck these guys are talking about half the time.
However, these are the guys that are going to get us things like CM7 on our Droid X2. So the best advice I could give you would be to step back and let them work.
I hope you don't take this the wrong way, just trying to help.
ricovox said:
Can someone please comment on how 2ndinit compares to the "Droid X2 System Recovery" originally Posted c21johnson in terms of function?
My understanding is that ROMs etc could be flashed with the Recovery, so is 2ndinit simply an alternative method to flash ROMs? Can 2ndinit also function as a recovery method as well?
Or is 2ndinit something completely different altogether?
Thanks!
Click to expand...
Click to collapse
I Really Hope I'm Not Gonna Get Frowned Upon By Posting This But If You Wanna Know How It Works Read This Like I Have.
http://cvpcs.org/blog/2011-06-14/2nd-init._what_it_is_and_how_it_works
KurioHonoo said:
I rebooted and tried again, still getting no permission
Click to expand...
Click to collapse
Please give me the output from the commands below.
ls /system/xbin
ls /system/bin
ls -R /system/rootfs
Related
THIS THEME IS ONLY FOR THE BELL ATRIX. IT REQUIRES YOU TO HAVE A DEODEXED SYSTEM.
Disclaimer: I am not responsible for any softbricking that may happen to your device. I have tested it on my phone only.
I am finally ready to release a Hoenycomb theme I made for the Bell Atrix. I have been testing/tweeking with the help of raybond25 for a bit now I am happy enough with it to release it for everyone to use . Please let me know about any bugs you come across.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.4.2 TELSTRA FILES
Telstra theme has no carrier name in the status bar!
CWM install zip:
TELSTRA_Honeycomb_v1.1.zip
BACKUP / RESTORE
TELSTRA_FRESH_DEODEX.zip
0.37 BELL FILES
CWM install zip:
Bell_HoneyComb_v1_CWM.zip
Installation:
First you need to have deodexed your system files. This can be done by following the instructions in this thread: [script] Deodexed files for Bell
CWM
1. Download the CWM zip
2. Place the still compressed zip onto your SD card
3. Boot into recovery and install
BACKUP / RESTORE
Bell_Fresh_Deodex_Backups_CWM.zip
CWM
1. Download the CWM zip
2. Place the still compressed zip onto your SD card
3. Boot into recovery and install
THANKS
dbefore I used HoneyGlow as a base
00.ante for his awesome Market Theme
kmiller8 For an awesome HoneyComb Boot Animation
Silent8Strike For the POST that I used for this one.
raybond25 for helping me bug test.
Reserved for updates
Also reserved for updates
damn,
really wish you would have made this for 1.4.2 Telstra/Bell as most of the community has moved to that.
Could you port it?
seven2099 said:
damn,
really wish you would have made this for 1.4.2 Telstra/Bell as most of the community has moved to that.
Could you port it?
Click to expand...
Click to collapse
Yea, when that SBF got posted it was just as I was starting to finish this one up. Made me sad haha.
I haven't looked into the current state of 1.4.2 but assuming someone has figured our how to root/deodex it, I will start porting this over ASAP. I am hoping it won't take me nearly as long to port it over as it took to build it the first time.
Great dude, love how this turned out
Sent from my MB860 using XDA Premium App
Can you deodex the atrix on a mac?
Sent from my Motorola Olympus
Theme looks great, very nice work. Once you get it ported over to the new 1.42 I'll be sure to give it a try.
ChongoDroid said:
Can you deodex the atrix on a mac?
Sent from my Motorola Olympus
Click to expand...
Click to collapse
You should just set up boot camp lol
Sent from my MB860 using XDA Premium App
ChongoDroid said:
Can you deodex the atrix on a mac?
Sent from my Motorola Olympus
Click to expand...
Click to collapse
Read my guide in the signature. This has how to deodex, and how to do it manually.
This is for 1.4.2
toughbax said:
Yea, when that SBF got posted it was just as I was starting to finish this one up. Made me sad haha.
I haven't looked into the current state of 1.4.2 but assuming someone has figured our how to root/deodex it, I will start porting this over ASAP. I am hoping it won't take me nearly as long to port it over as it took to build it the first time.
Click to expand...
Click to collapse
Hey sir
Just read all the 3 guides in my signature.
Flash, Root, and Deodex of 1.4.2
looking forward to a port, this looks badass
SN4K3B1T3 said:
You should just set up boot camp lol
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I don't have a windows disk... All right guys you've motivated me to get deodexed!
Sent from my Motorola Olympus
Hey Seven
EDIT: nevermind all of it
got it working and I am deodexed thanks guys I just had to smoke one and figure it out hehe time to strip away again and get a custom theme going. THEN I'm not touching it until 2.3 haha
ChongoDroid said:
EDIT: nevermind all of it
got it working and I am deodexed thanks guys I just had to smoke one and figure it out hehe time to strip away again and get a custom theme going. THEN I'm not touching it until 2.3 haha
Click to expand...
Click to collapse
I don't know if you saw but there's a gb theme compatible with the U4 1.4.2 looks really good running right now and cas be flashed via CWM
Sent from my MB860 using XDA Premium App
SN4K3B1T3 said:
I don't know if you saw but there's a gb theme compatible with the U4 1.4.2 looks really good running right now and cas be flashed via CWM
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Yeah I flashed the honeycomb one and it worked except the lock screen was mangled and all the apps fc'd but I downloaded the gingerbread theme and sent it to myself via gmail. Now I have a honeycomb clock widget and a gingerbread theme lol. All is well guys... Great theme love the task bar.
Sent from my MB860 using XDA App
ChongoDroid said:
Yeah I flashed the honeycomb one and it worked except the lock screen was mangled and all the apps fc'd but I downloaded the gingerbread theme and sent it to myself via gmail. Now I have a honeycomb clock widget and a gingerbread theme lol. All is well guys... Great theme love the task bar.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
That was 1.42 that mangled your lock screen and FC'd everything?
I will port it over soon, I have already ported about 85-90% of it, I'm just charging my battery so I can flash the SBF. Maybe tomorrow I will have the theme fully ported and tested.
toughbax said:
That was 1.42 that mangled your lock screen and FC'd everything?
I will port it over soon, I have already ported about 85-90% of it, I'm just charging my battery so I can flash the SBF. Maybe tomorrow I will have the theme fully ported and tested.
Click to expand...
Click to collapse
Sweet! I'd love to try this on my phone. Once you have it ported to 1.42, i can help test if you'd like.
toughbax said:
That was 1.42 that mangled your lock screen and FC'd everything?
I will port it over soon, I have already ported about 85-90% of it, I'm just charging my battery so I can flash the SBF. Maybe tomorrow I will have the theme fully ported and tested.
Click to expand...
Click to collapse
yezzir! Just one slider was 90° out and everything fc'd except gmail
Sent from my MB860 using XDA App
I get bug in notification when i download i cant see the text and some glitch happend on some white scrolling menu no txt can be seen but when i touch the screen it get black and text is ok
Sent from my MB860 using XDA Premium App
Due to many bugs in EC09 and the widely reported SD Card issues, I am now recommending that you flash ED01-series Froyo ROMs or one of the AOSP Gingerbread ROMs (andmer's MIUI or jt's CM7).
Hello community,
Today I bring you TechnoROM. It is a ROM based off of navenedrob's NAMELESS v4.1 with a few tweaks from the forums & irc. Includes Nameless background to pay homage to its roots. It is mostly NAMELESS with tweaks.
This is my first custom ROM, and it, of course, is based off of EC09. THIS IS ALPHA SOFTWARE.
Thanks to...
Navenedrob (for NAMELESS)
Adrynalyne (for his framework)
redeyes (for link to new graphics)
The IRC crew
The whole Community!
Corrupted SD Cards
Here is my viewpoint on the corrupted SD deal. Are the corrupted? Probably not. Mine just "corrupted" itself and is supposedly blank. However, in Clockwork Mod, it sees all my files. Odd? What is even more weird is that a simple reboot seemed to fix my problem. Maybe I'm lucky, maybe its still messed up, but try this first before you panic.
If you flash, backup your SD Card, or don't come whining to me, navenedrob, or any of the developers. Along with all the other bugs in EC09, it doesn't make sense to use this release at the moment. DO SO AT YOUR OWN RISK.
Instructions:
Install this(http://www.multiupload.com/8VDE8GX69P) recovery if you have not done so. It is CWM3 OTB from the NAMELESS thread. You will need ODIN.
Download TechnoROM and place it on your SD Card.
Boot to Clockwork Mod (Both volume keys + Power) and select flash zip. Find the package, and flash. This should wipe your data for you.
Reboot. Profit.
Changes
Various Fixs
New Framework from Adynalyne (with over scroll glow)
New graphics drivers from Nexus S
Launcher2 from AOSP Gingerbread
Included Titanium Backup to get you going quicker
Issues
SD Card could be corrupted, formatted, or wiped clean. See SD Card section for more details.
Poor 2D performance (will look into)
Auto-rotate cause event\0 to drain battery (issue with every EC09)
TSM Boot Options Force Close [from NAMELESS]
File Manager Force Close
Videos don't play
Stock browser won't download specific files
I am starting small with a few changes, and I will add as I see fit. I like Launcher2 better than anything at the moment, and that is the main change that you will see. The phone should feel faster though with some of these tweaks. Please report back with results.
NOTE: I am not liable if you brick your phone! However, I will try to help fix it if you do. NAMELESS & Stock EC09 have had issues formatting SD Cards, so back up your SD Card before flashing! Just a precaution. This has only been tested on my phone so far!
Download: http://mmtechonline.com/fasc/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you!!
Cool. I will definitely flash it later.
Flash now
Sent from my SCH-I500 using XDA Premium App
Jmatch said:
Flash now
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Please post your feedback and if you have any suggestions or issues.
Thanks,
JP Tech
Hopefully I don't sound stupid, but, is this just the rom or is everything included such as kernal, modem, ect..? And does this include any of the same bugs and such of that sort from NAMELESS?
Just asking so I know. Thank you for the rom. =]
xcoryedgex said:
Hopefully I don't sound stupid, but, is this just the rom or is everything included such as kernal, modem, ect..? And does this include any of the same bugs and such of that sort from NAMELESS?
Just asking so I know. Thank you for the rom. =]
Click to expand...
Click to collapse
This includes kernel. For a modem, use one of the EC's or ED's. Check my thread about EC09 for ODIN: http://forum.xda-developers.com/showthread.php?t=1132236. That is the official MODEM for this. Everything else is included in the package in the OP.
As far as bugs, I think I have fixed a few, but some persist like the auto rotate bug. See the OP for the official bug list. It will grow tomorrow as I find more things.
Thanks,
JP Tech
jptech7 said:
This includes kernel. For a modem, use one of the EC's or ED's. Check my thread about EC09 for ODIN: http://forum.xda-developers.com/showthread.php?t=1132236. That is the official MODEM for this. Everything else is included in the package in the OP.
As far as bugs, I think I have fixed a few, but some persist like the auto rotate bug. See the OP for the official bug list. It will grow tomorrow as I find more things.
Thanks,
JP Tech
Click to expand...
Click to collapse
Thank you very much. I look forward to flashing this. I may try it tonight and report any possible bugs not mentioned and any fixes I may find.
Downloading......
Sent from my SCH-I500 using XDA App
I'm gonna test this out as soon as it finishes downloading.
TSM options FC when trying to reboot, shut down etc. Nothing else so far.
Running great!
EditlayPro keeps fc'ing also. Seemed to work in my previous stock 2.3 rom. Weird.
DevinLeFevere said:
TSM options FC when trying to reboot, shut down etc. Nothing else so far.
Running great!
Click to expand...
Click to collapse
That is an issue from NAMELESS that has yet to be addressed. Added to the OP list of issues.
any issues with sdcards? the nameless ROM raped my 16 gig and i cant lose my lil 2 gig....lol
BakedTator said:
any issues with sdcards? the nameless ROM raped my 16 gig and i cant lose my lil 2 gig....lol
Click to expand...
Click to collapse
That's scary. I've read a lot of sdcards pooping.
BakedTator said:
any issues with sdcards? the nameless ROM raped my 16 gig and i cant lose my lil 2 gig....lol
Click to expand...
Click to collapse
I haven't had an issue, but as this based off of NAMELESS, it suffers that same possiblility. Which recovery did you use and what were you coming from when your as went bad? Have you tried the card in the computer or another device?
UPDATE: Had an issue & fixed it. Check OP for details.
Sent from my SCH-I500 using XDA App
nice man way to kang everyone and not have a single thing in here that you did yourself.
thefunkbot said:
DUDE nice way to kang everyone and not have a single thing in here that you did yourself!
Click to expand...
Click to collapse
I gave everyone credit. I asked navenedrob's permission to use NAMELESS. I gave credit to redeyes for graphics. I gave credit to Adrynalyne for framework. This is to make it easier for people to get all the latest dev from the irc. We were all workibg together on the irc to accomplish this. This is a community, and I am trying to give back for the general betterment of the phone and community. Sorry if that is not how someone perceives it.
Sent from my SCH-I500 using XDA App
jptech7 said:
I gave everyone credit. I asked navenedrob's permission to use NAMELESS. I gave credit to redeyes for graphics. I gave credit to Adrynalyne for framework. This is to make it easier for people to get all the latest dev from the irc. We were all workibg together on the irc to accomplish this. This is a community, and I am trying to give back for the general betterment of the phone and community. Sorry if that is not how someone perceives it.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I see nothing wrong with what you did at all, and I welcome it (since you gave credit). I don't have time to chill in IRC and apply random fixes. If someone can combine them into one ROM and support it, well then god damnit, I'll support you.
Not everyone is a developer, and not everyone wants or has time to kang stuff themselves. As long as you can positively contribute something to the community as a whole, it should be welcomed.
jptech7 said:
I gave everyone credit. I asked navenedrob's permission to use NAMELESS. I gave credit to redeyes for graphics. I gave credit to Adrynalyne for framework. This is to make it easier for people to get all the latest dev from the irc. We were all workibg together on the irc to accomplish this. This is a community, and I am trying to give back for the general betterment of the phone and community. Sorry if that is not how someone perceives it.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I understand giving credit to someone, but when you are posting a rom here in which NOTHING in it is your own work... it probably isnt your place to be posting it.
Easy fix for the for force close....
Found an easy fix for now at least to stop the force closing of the phone options power menu while trying to get into recovery, go to http://forum.xda-developers.com/showthread.php?t=1132460 and download and flash one of the two files posted by SBRISSEN and it should fix the force closing hope it helps!! and thank you to all the devs out there that put so much of your time into making our phones great thank you soo much!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
BE AWARE THAT THIS IS VERY VERY BETA. THINGS ARE BROKEN ON IT. I DON'T WANT REPORTS OF ISSUES THAT I HAVE LISTED BELOW. I WILL BE FIXING THINGS AS I CAN. DO NOT AS FOR AN ETA, AS THIS IS PRETTY DIFFERENT FROM PREVIOUS BUILDS.
How To Flash
Place ROM onto phone storage
Reboot to recovery
Make a Nandroid
Install Rom: Wipe INSIDE ROM
When you select "Reboot Not", you'll get a CWM error, IGNORE IT
Install OPTIONS or Gapps
WIKI/FAQ Located: To be reworked
Click to expand...
Click to collapse
Bugs??:
KNOWN ISSUES:
Videocamera : Use VideoCam Illusion
Slight Lag possible on screen transitions
USB tether
The graphics related issues are due to not having proper drivers to use for this. Don't ask for an ETA on a fix. Moto won't be giving us the drivers, so there is no fix
If you need to report a NEW bug, report it once, and the next TWO people VERIFY it. I don't need everyone reporting same bug 20 times. I you can, provide me the following information:
Version you're using
What type of fwipe you did and what ROM you came from
Have you restored any data from something like Titanium Backup
What app is misbehaving and what you were doing when it started
Logcats<--THIS IS PREFERRED.
If you don't know how to logcat, go HERE and learn. This really nice guy took the time to write out a good how to
When you have a LOGCAT and would like to post it, please go to pastebin and post it in there, then LINK that location in this thread...I don't want to see them posted directly in here.
Click to expand...
Click to collapse
Downloads:
ROM file is Located HERE
Options Chooser is Located HERE
My latest CWM: V1 as well as Aroma-Prep
can be downloaded HERE
Click to expand...
Click to collapse
Credits:
Cyanogenmod Team
scott.hart.bi=for helping me with source building
Jokersax11-for being my initial inspiration on Photon, being a cool guy, and helping me along in my early days
Amarullz=for creating the Aroma Installer
Spleef-for collaborating on those first builds that got me into Android
All my testers and users
Anyone else I may have forgotten
Click to expand...
Click to collapse
Kernel Source: HERE
Click to expand...
Click to collapse
Screenshots
Changelog
20121028-Now includes GooManager, so for future releases, there should be support for OTA updates
For Cyanogenmod Changelog, go HERE
Good job man, are you now including a theme? Or does that come with one of the Options packages?
Can this be dirty-flashed over 10/10, or just cache/dalvik?
I see you've got your own recovery now. Is that the same as the "joker's v3 CWM" that everyone recommends, or something else?
Dark Reality said:
Good job man, are you now including a theme? Or does that come with one of the Options packages?
Can this be dirty-flashed over 10/10, or just cache/dalvik?
I see you've got your own recovery now. Is that the same as the "joker's v3 CWM" that everyone recommends, or something else?
Click to expand...
Click to collapse
Something else. Newer. Vers 6.0.1.5. I have flashed MIUI, CM10, and AOKP with it now....worked perfectly for it
Theme is just an example of one that is in the market (Cobalt)
If 10.10 is 4.1.2, then I would say yes. If it's still 4.1.1,then no, you would need to wipe all....just to be safe. I forgot which version of android 10.10 is...LOL
Thank you bill for all your work u keeping this forum alive
Sent from my MB855 using xda app-developers app
MIONS said:
Thank you bill for all your work u keeping this forum alive
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
AGREE!!
One stupid question to ask, I can flash either Romoptions or Options chooser right? Or i need to flash both?
Thanks!
Stephenhon said:
AGREE!!
One stupid question to ask, I can flash either Romoptions or Options chooser right? Or i need to flash both?
Thanks!
Click to expand...
Click to collapse
ROMOptions is just for CDMA/GSM or storage setting. Options chooser is for other options including apps...
Th3Bill said:
Something else. Newer. Vers 6.0.1.5. I have flashed MIUI, CM10, and AOKP with it now....worked perfectly for it
Theme is just an example of one that is in the market (Cobalt)
If 10.10 is 4.1.2, then I would say yes. If it's still 4.1.1,then no, you would need to wipe all....just to be safe. I forgot which version of android 10.10 is...LOL
Click to expand...
Click to collapse
Okay, definitely checking out your recovery then. I really prefer TWRP (bunch of reasons, not just the touch) but if one works better than the other for some ROMs, no reason I can't go back and forth.
Kind of waiting for CNA (I know you're waiting on the dev) but CM10 10/10 is rock solid. And it's 4.1.2, I believe it was your first 4.1.2.
I knew you had a thing for Cobalt, but I'd only seen the red one. I just got one called "Elegant Green", it's okay but wasn't really what I was after. I might have to learn to theme and make my own, or just get ROM Toolbox. The default CM theme is fine, I'd just change all the cyan to a shade of green (I'm kinda bad with hex, but around #00DD30 is what I like).
Anyway, thanks again for your work on this. I can hit the Thanks buttons, but it needs to be said more. So, thanks. :good:
Thanks Bill for everything! Can you possibly include a changelog for the builds either on here or in goomanager? Thanks again!
Bill. What is the difference between your CWM vs. Joker's CWM v3? Just curious if its better to be flashing your CWM vs. Jokers for your CM10 ROMs. Thanks.
Hey Bill su is not working.
CNA JB Mopho
iStayHigh said:
Hey Bill su is not working.
CNA JB Mopho
Click to expand...
Click to collapse
You flashed the 10/28 ROMOptions?
ericdabbs said:
You flashed the 10/28 ROMOptions?
Click to expand...
Click to collapse
Yes I did
CNA JB Mopho
Not able to flash any rom
When I'm flashing any rom in the recovery an error comes "Can't open /emmc/name of the rom.zip(bad)"
Help please
Dirty flashed 10/28 over 10/10 (both JB 4.1.2 ROMs), everything seems to be in order. Data works, su works. (10/10 had been flashed clean after a "wipe all".)
Finally took your theme advice and installed Cobalt... Kiwi Cobalt. It's his green one. It's the best green theme I've used. I'm seeing a lot of elements from Mixer (or maybe Mixer borrowed from Cobalt) so it's not at all unfamiliar. Now I just need a nice dark brushed-metal wallpaper (currently on the one in the first screenshot) to complete my black-on-green look. Might also alter the wallpaper to have a green Cid instead of cyan (can one simply extract a wallpaper out of a wallpapers chooser pack like that?).
How come no real progress is being done with battery life? I'm running Bills's and Jokers roms from the beginning, I'm using GSM and I barely have any apps, I have only one google account synced and I barely get 8 hours if I don't use the phone at all, I thought it was related to the KDDI modem so I flashed back to stock, I now have the n_01.28.05s.fk modem and still same battery life.
Will the new drivers/kernel improve battery life? is any of Bills other JB roms (aokp, CNA, Paranoid) better optimized for battery life?
MIONS said:
Thank you bill for all your work u keeping this forum alive
Click to expand...
Click to collapse
+1
Does video recorder work?
jam97 said:
+1
Does video recorder work?
Click to expand...
Click to collapse
Not without factory drivers from Motorola. Though you can use third party apps like videocam illusion.
Sent from my MB855 using xda premium
iStayHigh said:
Hey Bill su is not working.
CNA JB Mopho
Click to expand...
Click to collapse
I personally tested it, so I'm not sure why it's not working for you. DId you dirty flash if over something else? If so, try a full wipe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is King Kang?!?
King Kang is essentially a hybrid ROM - its a mixture of AOKP, CyanogenMod, and ParanoidAndroid, bringing all their customizations to one rock solid and quick ROM. These numerous features combine to create a blend of features not seen anywhere else before. Make the user interface yours with this ROM. Change the DPI the ROM runs at, tweak the interface to your hearts content, while enjoying great battery life and stability. Never before have these features combined to create a ROM as feature-packed as King Kang. Credits for the features goes directly to the teams responsible - AOKP and CM for their respective work, and ParanoidAndroid for their wonderful DPI on-the-fly modifications. Without these teams, this ROM would not be possible.
Click to expand...
Click to collapse
How To Flash
Place ROM onto phone storage
Reboot to recovery
Make a Nandroid
Install Rom: Wipe INSIDE ROM
When you select "Reboot Not", you'll get a CWM error, IGNORE IT
Install OPTIONS or Gapps
WIKI/FAQ Located: To be reworked
Click to expand...
Click to collapse
PLEASE NOTE: I will NOT provide ParanoidPreferences.apk in this ROM zip. The devs of that great ROM have asked that the particular apk NOT be included in NON-PA zips. They put in the work, so I respect their wishes. That being said, I will NOT link the file nor do I want to see it linked here.
To get it, do the following:
Boot into King Kang and set up Gapps
Download Paranoid Android ROM zip
Download Root Browser
Use Root Browser to extract the file from the PA zip
Place it into /system/app
Set permissions to RW, R, R
Reboot
Click to expand...
Click to collapse
To successfully set Tablet mode in King Kang, follow the following steps....
Go into settings
Go into ROM Control
Go into Navigation Bar and enable bar, allow SU
Go back and go into General UI
Click Force Tablet UI and reboot manually
Once you come back from the reboot, go into Settings
Go into Paranoid Settings
Go into Workspace
Click on what mode y
Click to expand...
Click to collapse
Bugs??:
KNOWN ISSUES:
Videocamera : Use VideoCam Illusion
Slight Lag possible on screen transitions
USB tether
The graphics related issues are due to not having proper drivers to use for this. Don't ask for an ETA on a fix. Moto won't be giving us the drivers, so there is no fix
If you need to report a NEW bug, report it once, and the next TWO people VERIFY it. I don't need everyone reporting same bug 20 times. I you can, provide me the following information:
Version you're using
What type of fwipe you did and what ROM you came from
Have you restored any data from something like Titanium Backup
What app is misbehaving and what you were doing when it started
Logcats<--THIS IS PREFERRED.
If you don't know how to logcat, go HERE and learn. This really nice guy took the time to write out a good how to
When you have a LOGCAT and would like to post it, please go to pastebin and post it in there, then LINK that location in this thread...I don't want to see them posted directly in here.
Click to expand...
Click to collapse
Downloads:
ROM file is Located HERE
Options Chooser is Located HERE
My latest CWM: V1 as well as Aroma-Prep
can be downloaded HERE
Click to expand...
Click to collapse
Credits:
AOKP, Paranoid Android, Cyanogenmod, and King Kang Teams-Without all of them, this ROM doesn't exist
scott.hart.bi=for helping me with source building
Jokersax11-for being my initial inspiration on Photon, being a cool guy, and helping me along in my early days
Amarullz=for creating the Aroma Installer
Spleef-for collaborating on those first builds that got me into Android
All my testers and users
Anyone else I may have forgotten
Click to expand...
Click to collapse
Kernel Source: HERE
Click to expand...
Click to collapse
Changelog
Screenies
Nice and first! Downloading now...
Flashed just now! And aroma installer touch fails to work and on
"install boot partition."
"set_perm: some changes failed "
Will upload log shortly.
Well can't upload logcat...
No access to adb.
All booted up great tho.
So far everything works perfect!!!! Gonna run a stress test after I install gapps.
As always thanks Th3Bill!!
Don't forget to thank all who help!
This message brought to you by Tichater using XDA app.
Tichater said:
Flashed just now! And aroma installer touch fails to work and on
"install boot partition."
"set_perm: some changes failed "
Will upload log shortly.
Well can't upload logcat...
No access to adb.
All booted up great tho.
So far everything works perfect!!!! Gonna run a stress test after I install gapps.
As always thanks Th3Bill!!
Don't forget to thank all who help!
This message brought to you by Tichater using XDA app.
Click to expand...
Click to collapse
Can you do this favor for me? GO to recovery and go to advanced menu. Choose Report Error. It will put a file in the clockworkmod folder of your sd card I believe (may do emmc...I can't be certain) named recovery.log. Can you send that file to me? It will tell me which set_perm isn't working, so that I can fix it
adb logcat should work from a pc. I don't think that much of the on-board logcat stuff works yet, which is unfortunate...
Dear Th3Bill
I can't turn on wifi with Kingkang Rom
Sent from my MB855 using Tapatalk
thieuta said:
Dear Th3Bill
I can't turn on wifi with Kingkang Rom
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
can you pull a logcat of trying to turn it on?
Any major differences between this and PACman? Also, are there different versions of ParanoidPreferences.apk? Is the one in PACman (I got it before it was taken out) the most current, or is the one in PA 2.99 more recent?
Also, in the tablet mode directions, you kinda just stopped in Step 9. And in the initial description, the whole "never before been done" doesn't make much sense to those of us who have tried PACman (unless King Kang came first).
Th3Bill said:
Can you do this favor for me? GO to recovery and go to advanced menu. Choose Report Error. It will put a file in the clockworkmod folder of your sd card I believe (may do emmc...I can't be certain) named recovery.log. Can you send that file to me? It will tell me which set_perm isn't working, so that I can fix it
adb logcat should work from a pc. I don't think that much of the on-board logcat stuff works yet, which is unfortunate...
Click to expand...
Click to collapse
Here ya go! Hope it helps!
http://ubuntuone.com/34e1h81JqcrTvOS1xJRbc1
I can upload log from aroma installer too if it will help. I always save that log error or not.
Plus a little more info I came from cm10 its my daily driver.
Don't forget to thank all who help!
This message brought to you by Tichater using XDA app.
thieuta said:
Dear Th3Bill
I can't turn on wifi with Kingkang Rom
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
Same issue, but want to try to reinstall later and see if it persists.
If so I will look at getting a log for you.
Until then, charging.
Sent from my sunfire using xda premium
I have the issue fixed. ROM re-uploaded (its B)
Th3Bill,
Tried ROM B of KingKang and still got no wifi. When booting initially with Options, wifi starts up but shows no networks. Get past that with 3G, and go to settings and check WI-FI, it comes up with turning on WIFI. The WIFI switch flips to on and back to off. Though the right pane says turning wifi on. Go to Play Store and it wants me to relog into Google. Downloaded a logcat program and went back to try WIFI, The button/switch will not move or do anything. I may have to re-install and try to do the ADB Logcat. I will look on your site and other information area's on pulling a proper logcat for you.
secret.animal said:
Th3Bill,
Tried ROM B of KingKang and still got no wifi.
Click to expand...
Click to collapse
Th3Bill said:
I have the issue fixed. ROM re-uploaded (its B)
Click to expand...
Click to collapse
Im pretty sure Th3Bill was talking about my permission issue.
And I will download now and boot it up in the AM!
Don't forget to thank all who help!
This message brought to you by Tichater using XDA app.
Tichater said:
Im pretty sure Th3Bill was talking about my permission issue.
And I will download now and boot it up in the AM!
Don't forget to thank all who help!
This message brought to you by Tichater using XDA app.
Click to expand...
Click to collapse
This man is correct. Wifi issue is kernel related, and I will upload a fix as soon as I can. Got a bunch going on, and am still working on integrating more info into the site to make it better and more useful.
I am also working on CM10.1. I will see if the kernel from one of my other builds fixes it. If yes, I'll upload the kernel and modules tonight...it will probably be late though (after 11pm Est)
Don't know if this is useful or not, but I'm using a joker 1.3 kernel and have no wifi issues.
Hey Bill,
Will this be helpful to u?
http://www.xda-developers.com/android/linux-kernel-3-7-stable-released-with-arm-support/
Wifi issue is fixed
I'm uploading build C now
UPOADED
FernBch said:
Don't know if this is useful or not, but I'm using a joker 1.3 kernel and have no wifi issues.
Click to expand...
Click to collapse
Can you please post the kernel? Jokersax is down.
I want to try it out on AOKP
running this ROM now and its so smooth..I have one issue though..I can't seem so keep the clock speed @ 1000Mhz..after I manually reboot my ohone it goes back to 1300Mhz..anyway to fix this?
Sent from my MoPho using XDA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ladies and gentlemen. The most highly anticipated dev team brings you, the fifth build from "Team Rage." We give to you, Rage One. Note i do not actually own this device, so this is a blind port. But everything should be working fine, so i need you guys to figure out the bugs and me test it out!
BDH - Team Rage Owner / Lead Developer
xCorps - Team Rage Co-Owner / Developer
halo13 - Team Rage Developer
mr4r4n - Team Rage Developer
MustafaHadaKing - Team Rage Developer
Utkaar099 - Team Rage Developer
usmcamgrimm - Team Rage Lead Themer
Zooyork0721 - Team Rage Themer
Gerland The Oracle - Team Rage Support Specialist
FOLLOW TEAM RAGE ON TWITTER dev_Team_Rage
Click to expand...
Click to collapse
Deodexed
Debloated
Pre-Rooted
Adb Insecured
Loopy Smoothness (Scrolling Smoothness Tweak)
Full Init.d Support
DSP Manager
Amazing Battery Saving Tweaks
Tons Of Awesome build.prop Tweaks
Zipaligned
PIE Controls (LMT Launcher)
MORE TO FOLLOW!
Click to expand...
Click to collapse
Advanced Power Menu
PureXAudio Engine
Click to expand...
Click to collapse
BigDaddyhicks
AliReza7991
Team Rage
Utkaar099
he_stheone64 - EQS and battery mods
Dunc001 - APM
ZeroInfinity - PureXAudio
JMZ for base
If i forgot you let me know
Click to expand...
Click to collapse
You know the deal.
Backup, Wipe, Wipe Wipe, Flash, Reboot, Profit
the boot.img is in the zip so extract it from the zip and flash it though fast boot.
Noob instructions
Download the ROM onto your computer
extract the boot.img
make a folder in computer called Android, and place the boot.img in their
then open up CMD or terminal
connect your phone to the your computer and make sure USB debugging is toggles on in your phone.
in ADB type "fastboot flash boot C:\android\boot.img
Then flash the ROM onto your phone in recovery. Make sure to wipe
Click to expand...
Click to collapse
Version 1.1.0
[*]I need you guys to test it make sure it works!!! I don't own this device!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
will make thread fancier soon
onne more
My phone bootlooped after flashing this. Please avoid this!!!!
Beware until the dev fixes this! Not sure if this is a real Rom but my phone soft bricked!!
I would advise using the roms from trusted devs in the International HTC One forum such as Android Revolution HD and TrickDroid for now.
Sent from my HTC One using Tapatalk 2
Toaster Strudels said:
My phone bootlooped after flashing this. Please avoid this!!!!
Beware until the dev fixes this! Not sure if this is a real Rom but my phone soft bricked!!
I would advise using the roms from trusted devs in the International HTC One forum such as Android Revolution HD and TrickDroid for now.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
So because your phone bootlooped....the Rom is no good. Way to start the thread off. I think you probably didn't do something right.
Mod feel free to delete my comment.
Sent from my HTC One X using xda premium
Toaster Strudels said:
My phone bootlooped after flashing this. Please avoid this!!!!
Beware until the dev fixes this! Not sure if this is a real Rom but my phone soft bricked!!
I would advise using the roms from trusted devs in the International HTC One forum such as Android Revolution HD and TrickDroid for now.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
nice try
just so you guys know, this guy is just a troll he is my friend in real life just being a troll.
here's some proof:
he claims to have downloaded the rom and flashed it.
only one problem since i just posted the rom a few minutes ago no one had downloaded it. theres no way he could have downloaded it and flashed it that fast! and according to androidfilehost the ROM has 0 downloads . heres a screenshot http://gyazo.com/4c1ec80543fe13194caeb9e0f0e5836e
Thanks and please ignore him. I need real testers
Wow already? Sounds like it has the extras I want. I may have to unlock and get rooted here. Thanks for the ROM...and making my decision to run stock for a couple of days most likely impossible now
I never understood why HTC doesn't at least give the 1% battery option in settings. I can think of a few init.d scripts I would like to try too. I guess it's time to shut up and get started...
Sent from my HTC One using Xparent Gray Tapatalk 2
Toaster Strudels said:
My phone bootlooped after flashing this. Please avoid this!!!!
Beware until the dev fixes this! Not sure if this is a real Rom but my phone soft bricked!!
I would advise using the roms from trusted devs in the International HTC One forum such as Android Revolution HD and TrickDroid for now.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
thanks for the heads up
MustafaHadaKing said:
nice try
just so you guys know, this guy is just a troll he is my friend in real life just being a troll.
here's some proof:
he claims to have downloaded the rom and flashed it.
only one problem since i just posted the rom a few minutes ago no one had downloaded it. theres no way he could have downloaded it and flashed it that fast! and according to androidfilehost the ROM has 0 downloads . heres a screenshot http://gyazo.com/4c1ec80543fe13194caeb9e0f0e5836e
Thanks and please ignore him. I need real testers
Click to expand...
Click to collapse
AndroidFileHost updates once every 30 minutes or so with download count...
Also it takes about 3 minutes to download and a a minute to flash. Then a following minute of bootlooping to realize the ROM isn't functional.
Sent from my HTC One using Tapatalk 2
Toaster Strudels said:
AndroidFileHost updates once every 30 minutes or so with download count...
Also it takes about 3 minutes to download and a a minute to flash. Then a following minute of bootlooping to realize the ROM isn't functional.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
#1 androidfilehost updates right away. you guys can go click download and then refresh and page and there a new download.
if you can download 900mb in 3 min you have nice internet!
but as i stated before, i know you real life and i know and everyone else should that he is just doing this to troll me.....
BTW you also said your phone is "softbricked" but it just said YOU sent this from HTC ONE
opcorn:
Love the stuff
I'm ready to try this out asap!
Sent from my HTC One using Tapatalk 2
lolz
Sent from my HTC One using Tapatalk 2
I want to try it, but need to know if it include Wi-fi Hotspot or any way that i can tether without paying to AT&T?
Thanks in advance!
I don't know if it's this rom or what, but now my phone is stuck at the HTC logo with this build is for dev. purposes only, and if I try to go into recovery CWM shows up for a split second then auto reboots again into the HTC logo with above red text. Please help. If I go into the toolkit it says device not found. Any ideas?
fleadog99 said:
I don't know if it's this rom or what, but now my phone is stuck at the HTC logo with this build is for dev. purposes only, and if I try to go into recovery CWM shows up for a split second then auto reboots again into the HTC logo with above red text. Please help. If I go into the toolkit it says device not found. Any ideas?
Click to expand...
Click to collapse
hold power button and volume down. then you should be in boot loader. then in fastboot reflash a recovery. then go to reocvery and wipe and restore a backup
MustafaHadaKing said:
hold power button and volume down. then you should be in boot loader. then in fastboot reflash a recovery. then go to reocvery and wipe and restore a backup
Click to expand...
Click to collapse
In fastboot, If I open the toolkit, it says error device not detected. I have never seen that before.
fleadog99 said:
In fastboot, If I open the toolkit, it says error device not detected. I have never seen that before.
Click to expand...
Click to collapse
try doing it manually in fastboot with adb
MustafaHadaKing said:
try doing it manually in fastboot with adb
Click to expand...
Click to collapse
Got it, restoring now. I noticed when trying to install this rom through CWM it says E:Error in "My location of rom.zip" (Status 6) Installation aborted. Just a heads up
fleadog99 said:
Got it, restoring now. I noticed when trying to install this rom through CWM it says E:Error in "My location of rom.zip" (Status 6) Installation aborted. Just a heads up
Click to expand...
Click to collapse
alright thanks