Failed to boot 2
Starting RSD mode.
I tried to flash the new Ninja Rom from the Gingerblur rom. I am now stuck on the dual core screen with the message above stuck there. Someone please help, I looked through the forms but it seems like I should be able to get into recovery still, which I cannot... If you need any other info please let me know....
rp2gardner said:
Failed to boot 2
Starting RSD mode.
I tried to flash the new Ninja Rom from the Gingerblur rom. I am now stuck on the dual core screen with the message above stuck there. Someone please help, I looked through the forms but it seems like I should be able to get into recovery still, which I cannot... If you need any other info please let me know....
Click to expand...
Click to collapse
Were you unlocked before trying to flash Ninja rom?
unlocked... no at least I dont think? Obviously I was rooted but unlocked i dunno...
That is why, your bootloader has to be unlocked.
Sent from my MB860 using XDA Premium App
rp2gardner said:
unlocked... no at least I dont think? Obviously I was rooted but unlocked i dunno...
Click to expand...
Click to collapse
Ah ok... gingerblur was a pseudo-rom... made before we were able to install custom roms because we couldn't unlock our bootloader. That changed last month when devs figured it out and thus the newer custom roms. To install them you need to unlocked your bootloader.
Please read this thread for information on how to unlock
http://forum.xda-developers.com/showthread.php?t=1136261
Now, since you're already softbricks, running that may not work right now. BUT it's start.
My suggestion- read the thread, follow the instructions and see if that gets you to boot up properly after running the oem unlock.
If not, then download a fresh stock 1.8.3 SBF form the development thread and RSD flash that.
Ok thank you for your help, will post a question if I come to one. How would I download the stock 1.8.3 SBF if I am stuck on the boot screen? Im feeling like Im in over my head, Paypal donation to anyone who can walk me through this....
rp2gardner said:
Ok thank you for your help, will post a question if I come to one. How would I download the stock 1.8.3 SBF if I am stuck on the boot screen? Im feeling like Im in over my head, Paypal donation to anyone who can walk me through this....
Click to expand...
Click to collapse
Stock SBFs are in the development forum as well.
I guess first things first, do you have the tools needed
Do you have or know how to use RSD?
How about Fastboot?
Just downloaded RSD lite and flashed the SBF..
"Open and extract the Fastboot package from above" is the step I am on.. Not sure where to go from here.
The phone rebooted to the same screen that it was at before with the error message but says PASS in RSDLite for the sbf flash
rp2gardner said:
Just downloaded RSD lite and flashed the SBF..
"Open and extract the Fastboot package from above" is the step I am on.. Not sure where to go from here.
The phone rebooted to the same screen that it was at before with the error message but says PASS in RSDLite for the sbf flash
Click to expand...
Click to collapse
Which SBF? The pudding/unlock?
If you flashed the pudding SBF, then you need to do the fastboot steps next.
Did you download and unzip the fastboot package to your computer?
I did, I just dont know what to do with fastboot. Do I run it or what?.. THANKS A TON BY THE WAY...
Ok, I still have the failed to boot 2, but I am now getting the Starting Fastboot protocol support. I dont understand this step..
Type the following command:
fastboot oem unlock
rp2gardner said:
I did, I just dont know what to do with fastboot. Do I run it or what?.. THANKS A TON BY THE WAY...
Click to expand...
Click to collapse
let's say you saved and extracted the fastboot files to c:\fastboot
then you have to open up CMD (start - run - cmd )
then cd to the directory it's saved (in this example c:\fastboot )
Now you have to get your phone into fastboot mode (directions are in the link), but in short, as you turn on your phone, hold the down button. THen it should say fastboot, then hit volume up, should say entering fastboot
Then back on computer in the command window
while your in the fastboot directory
type the oem unlock command (specific command in the instruction).
after it's all done, type fastboot reboot.
I have to go now for a while, but if all that doesn't work. I suggest flashing via RSD the 1.83 SBF with Pudding built in.
The download is in the pudding thread near the top "1. All phones If you have unlocked then try to use 2.3.4 update zip from Motorola servers, then revert back to a "pre-unlock" version(1.8.3 or earlier on ATT) you will get bricked! Do not use the OTA via experimental servers and revert to older versions WITHOUT pudding preinstalled in your sbf.
ATT ONLY Get your 1.8.3 with pudding from gitbrew or multiupload."
I cant figure out where to type the command in (fastboot oem unlock) i have the screen that came up when i located the fastboot. It has a list of commands, but nothing about oem unlock...
rp2gardner said:
I cant figure out where to type the command in (fastboot oem unlock) i have the screen that came up when i located the fastboot. It has a list of commands, but nothing about oem unlock...
Click to expand...
Click to collapse
Is your phone in fastboot mode and connected?
All you gotta do is just type the command in the command window
C:\fastboo\ fastboot oem unlock
Related
Hello All,
I'm new here, so I'm not exactly sure if this is the correct forum to be posting this, but here's my question:
When I attempt to unlock my bootloader using fastboot and the "fastboot oem unlock" command, it simply returns:
Code:
... INFOOEM unlock is not implemented
OKAY [ 0.001s]
Has anyone else gotten this message or anything like it? Or am I doing something wrong?
I'm rooted and running the 4.5.91 (ATT) update, and I updated from Gingerblur 3.5 using the PC update program.
The only way to unlock bootloader at this time is flashing pudding and then running fastboot OEM commands
SevenandForty said:
Hello All,
I'm new here, so I'm not exactly sure if this is the correct forum to be posting this, but here's my question:
When I attempt to unlock my bootloader using fastboot and the "fastboot oem unlock" command, it simply returns:
Code:
... INFOOEM unlock is not implemented
OKAY [ 0.001s]
Has anyone else gotten this message or anything like it? Or am I doing something wrong?
I'm rooted and running the 4.5.91 (ATT) update, and I updated from Gingerblur 3.5 using the PC update program.
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Really? Huh- I found that fastboot method on this website
briefmobile(dot)com/how-to-unlock-the-atrix-4g-bootloader
It says to use the command prompt to run fastboot and unlock it- I'm not sure if this was disabled or something, because it seems to have worked for most people on the 2.3.4 beta.
SevenandForty said:
Oh, really? I found that fastboot method on this website
briefmobile(dot)com/how-to-unlock-the-atrix-4g-bootloader
It says to use the command prompt to run fastboot and unlock it- I'm not sure if this was disabled or something, because it seems to have worked for most people on the 2.3.4 beta.
Click to expand...
Click to collapse
if you're running the ota update, then you don't have an unlockable bootloader. you need to flash a pudding sbf to get one, which you can find instructions to on either the general forum or the dev forum.
Oh, I see. Thanks!
same problem
I also have the same problem but I have a stock 2.3 atrix does it make a difference?
I had to flash the 4.5.91 pre root sbf Via rsd lite then run that fastboot command.
Sent from my MB860 using XDA App
You need to flash the unlock sbf first. Just remember that if you're on 2.3.4, after you flash the sbf, the phone will reboot and soft brick - that's normal. Be ready to fastboot flash RomRacer's CWM recovery, and have the two 2.3.4 Fruitcake builds on your external sdcard beforehand.
Once you've flashed RomRacer's recovery successfully, pull the battery, put in your SIM and sdcard again, boot into recovery, and then install both fruitcake builds.
After that, your phone will boot and you can root it at your leisure.
SevenandForty said:
Hello All,
I'm new here, so I'm not exactly sure if this is the correct forum to be posting this, but here's my question:
When I attempt to unlock my bootloader using fastboot and the "fastboot oem unlock" command, it simply returns:
Code:
... INFOOEM unlock is not implemented
OKAY [ 0.001s]
Has anyone else gotten this message or anything like it? Or am I doing something wrong?
I'm rooted and running the 4.5.91 (ATT) update, and I updated from Gingerblur 3.5 using the PC update program.
Click to expand...
Click to collapse
Are you flashing the .sbf first? If not, that is your problem or you have the same luck as me.. One or the other. Anyway, this is how I fixed mine:
I had this issue too.. Very irritating. I was using Linux to get my phone unlocked. When I went home from work, I tried again on windows 7 this time using RSDLite. It kinda worked. RSDLite got to 98%, the phone crashed and the flash status displayed failed. However, at 98%, the only thing left to do was for the phone to turn back on and verify the flashed image as far as I was concerned. Anyway, the phone said "Operating system not found" and went into fastboot mode from there. I felt I had nothing to lose by moving on. I issued a fastboot oem restore, and was able to get my code. I then reissued the command and typed in the whole code as windows wouldn't let me copy/paste from the command prompt (thanks Bill..). After doing this and pressing enter, my bootloader was nice and unlocked in about half a second. I rebooted using fastboot, and it locked up, so a battery pull got me working just fine. Hope this helps someone.
same problem
i have the same problem
1. i did use the sdf. but in the end it says FAIL in RSD
2. cant continue
3. still searching for answer:crying:
---------- Post added at 06:18 PM ---------- Previous post was at 06:07 PM ----------
hammerlock13 said:
Are you flashing the .sbf first? If not, that is your problem or you have the same luck as me.. One or the other. Anyway, this is how I fixed mine:
I had this issue too.. Very irritating. I was using Linux to get my phone unlocked. When I went home from work, I tried again on windows 7 this time using RSDLite. It kinda worked. RSDLite got to 98%, the phone crashed and the flash status displayed failed. However, at 98%, the only thing left to do was for the phone to turn back on and verify the flashed image as far as I was concerned. Anyway, the phone said "Operating system not found" and went into fastboot mode from there. I felt I had nothing to lose by moving on. I issued a fastboot oem restore, and was able to get my code. I then reissued the command and typed in the whole code as windows wouldn't let me copy/paste from the command prompt (thanks Bill..). After doing this and pressing enter, my bootloader was nice and unlocked in about half a second. I rebooted using fastboot, and it locked up, so a battery pull got me working just fine. Hope this helps someone.
Click to expand...
Click to collapse
sir, could you kindly pls. give the codes step by step, it will help a lot, i can not use my Atrix Thanks in Advance
OEM unlock is not implemented
I also have this issue
I am desperately looking for a solution without luck for my rooted
Atrix 4G Buld 4.5.2A
GB 2.3.4
If someone can point me to a solution I will be very glad
Thanks
Eli
i'm in the same situation....
help please
FIXED it and now my phone is unlocked
you have to flash the phone with RSD this file http://diamantephoto.com/IHOP_Bell.rar
and rerun the command to give you the phone ID
hope it helps for you
Hi ,
i have a small problem actually i tried to unlock my bootloader recently , i used the automatic bootloader unlock file but it didn't work, don't know why ,so i tried the fastboot unlock thing..where we have to put unique id code, n put commands fastboot oem unlock code my phone when doing it says ur phone is unlocked but when i on my phone the boot screen doesn't show unlock symbol ....i heart that unlock symbol should be showed...i think i am missing some steps or like that...can u guys help me out to solve it....my phone is working fine now but i am confused is my bootloader unlock or not?????
tris_333 said:
Hi ,
i have a small problem actually i tried to unlock my bootloader recently , i used the automatic bootloader unlock file but it didn't work, don't know why ,so i tried the fastboot unlock thing..where we have to put unique id code, n put commands fastboot oem unlock code my phone when doing it says ur phone is unlocked but when i on my phone the boot screen doesn't show unlock symbol ....i heart that unlock symbol should be showed...i think i am missing some steps or like that...can u guys help me out to solve it....my phone is working fine now but i am confused is my bootloader unlock or not?????
Click to expand...
Click to collapse
Did you flash the pudding unlock sbf first, before entering fastboot? If not, see Pudding OP in dev section.
Sent from my CM7 Atrix 4G
Swiftks said:
Did you flash the pudding unlock sbf first, before entering fastboot? If not, see Pudding OP in dev section.
Sent from my CM7 Atrix 4G
Click to expand...
Click to collapse
but in this site http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloaderit says if u r using gingerbread u dont have to flash just can do the fastboot
but i tried to flash the sbf file but RSD AFTER 100%...... my phone just open to normal state n rsd says reboot it manually n results says in process i damn confused
i am using android version 2.3.4 and system version 4.5.74.mbb860.att.en.us
plz help me out
tris_333 said:
but in this site http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloaderit says if u r using gingerbread u dont have to flash just can do the fastboot
but i tried to flash the sbf file but RSD AFTER 100%...... my phone just open to normal state n rsd says reboot it manually n results says in process i damn confused
i am using android version 2.3.4 and system version 4.5.74.mbb860.att.en.us
plz help me out
Click to expand...
Click to collapse
I would grab the "Unlocker for 1.8.3 and 4.5.91 ATT firmwares" from the main Pudding thread: http://forum.xda-developers.com/showthread.php?t=1136261
It's under the Unlock part of the OP (ATT ONLY).
Flash that small sbf file with RSD Lite.
Once finished flashing the unlock sbf file, Reboot, enter fastboot mode then enter the unlock commands.
See if that works.
I've looked around and I can't seem to find a way to unlock the bootloader on my 2.3.6 Atrix. Most tuts are for 2.3.4. What's the best way to do it?
http://dl.dropbox.com/u/34025287/4547-fix-try2.sbf
Flash this with RSD lite - run the fastboot oem unlock commands if needed. Its as simple as that
G-Man. said:
http://dl.dropbox.com/u/34025287/4547-fix-try2.sbf
Flash this with RSD lite - run the fastboot oem unlock commands if needed. Its as simple as that
Click to expand...
Click to collapse
You just run those in ADB, right?
mugabuga said:
You just run those in ADB, right?
Click to expand...
Click to collapse
Yes that's correct. You shouldn't need to if you unlocked your bootloader before the .141 update. To re-root use this method, it will give a couple errors at a certain point, just disregard the errors and continue with the commands and reboot your Atrix when you've finished - http://www.atrixforums.com/forum/mo...ing-stock-locked-2-3-4-2-3-6-a.html#post47155
G-Man. said:
Yes that's correct. You shouldn't need to if you unlocked your bootloader before the .141 update. To re-root use this method, it will give a couple errors at a certain point, just disregard the errors and continue with the commands - http://www.atrixforums.com/forum/mo...ing-stock-locked-2-3-4-2-3-6-a.html#post47155
Click to expand...
Click to collapse
But even if I've never unlocked it, it should still work?
mugabuga said:
But even if I've never unlocked it, it should still work?
Click to expand...
Click to collapse
If you've never unlocked it, it will act like a soft brick and hang on the first reboot - this is normal. You should have a screen pop up with a list of a dozen or more options, you'll need to select 'fastboot' and then run the command in ADB - fastboot oem unlock - this will give you a unique ID # - repeat the fastboot oem unlock command with the # at the end like this - fastboot oem unlock <unique ID # here> and press enter, it will give a warning about voiding your warranty, select yes and continue. From there, it should proceed with the unlock. After wards you'll need to let it fully reboot. Then boot your Atrix BACK into fastboot again, and flash RomRacers latest recovery with ADB. You can find the thread in the Development section. Then you load your ROM of choice onto your internal SD card and boot into CWM Recovery (RomRacers) and flash the ROM - give your Atrix 10-15 mins to fully boot after you install your ROM.
G-Man. said:
If you've never unlocked it, it will act like a soft brick and hang on the first reboot - this is normal. You should have a screen pop up with a list of a dozen or more options, you'll need to select 'fastboot' and then run the command in ADB - fastboot oem unlock - this will give you a unique ID # - repeat the fastboot oem unlock command with the # at the end like this - fastboot oem unlock <unique ID # here> and press enter, it will give a warning about voiding your warranty, select yes and continue. From there, it should proceed with the unlock. After wards you'll need to let it fully reboot. Then boot your Atrix BACK into fastboot again, and flash RomRacers latest recovery with ADB. You can find the thread in the Development section. Then you load your ROM of choice onto your internal SD card and boot into CWM Recovery (RomRacers) and flash the ROM - give your Atrix 10-15 mins to fully boot after you install your ROM.
Click to expand...
Click to collapse
EDIT: Fixed the problem by pulling the batt and unpluging from the computer.
mugabuga said:
Alright. It says it worked on the phone, but my RSD Lite claims it failed with an error switching phone to BP Pass through mode (0x70BE). Its just hanging at the success screen on my phone.
Click to expand...
Click to collapse
Can you upload a pic of the screen you are seeing?
[edit] I gotta get to bed, I'll check back here tomorrow if someone else is unable to assist you tonight. Its after midnight here and I'm getting over a bad cold still. I will check back here tomorrow.
mugabuga said:
EDIT: Fixed the problem by pulling the batt and unpluging from the computer.
Click to expand...
Click to collapse
Glad to hear that Ya had me a bit concerned for a minute there...
I've read this tutorial here:
[PUDDING] International House of Pudding! BL Unlock/root thread (Updated 07/23/2011)
I can't download the unlocked sbf, the site is suspended... Does anyone know another link? What's the size of this sbf file?
When I do this flash, the phone will restart automatically, it's normal if appear an error "flash failed"?
I saw another tutorials that don't need the step of installing SDK tools. Neither have to install this, they go to the cmd and go to fasboot folder. Do I really need to instal SDK tools to do the unlock or just go to the command line and get the fastboot?
Thanks
Murilo.
As long as you have the fasboot files you shouldn't need to install it. And you only need the few mb sbf unlock file, should be able to find it in dev section under the everything photon sticky thread
Edit: yes it is normal for the flash to "fail" you just have to pull battery and continue
Sent from my MB855 using XDA
one more question
Thanks for the answer.
There is any way to know if this flash with the unlock sbf was made correctly and it's ready for fastboot?
In wich moment can I do something that brick my phone?
Thanks
You'll know its done and ready for moving on when it says failed to flash or something along those lines, you can watch the percentage meter move through as it progresses until its done and "fails" but actually works and just displays a fail message. And as long as you follow the instructions you'll be fine
last doubt
Ok, I'll do now just the fastboot command.
Last weekend I did the flash with the unlock sbf and it was too fast, and the reboot was fast too. Different from the video I saw... Right?
Do I have to start again or can I just do the prompt command with the fastboot and unlock?
Thanks again.
The flashing shouldnt take long at all if your using the file "photonpudding" that is only a few mb in size, if you use the whole unlock sbf thats ~400 something mb then yeah it will take a long time but its unnecessary and wipes all data so stick to the small file and it will only take a few min if that to flash. And if you flashed the unlock sbf before and havent reset the phone you should be able to jump right to the fastboot unlock phase
Has anyone ever seen this before? I have reflashed stock recovery to the phone and before i could switch options in the boot menu i was stuck to only rsd or fastboot. I am on 2.3.5 I sent rdl3 to the phone it restarted in bootloader or fastboot just a moto logo i sent the fastboot oem unlock command, peices of derpunlock and also a system.img. now i can choose android recovery in my boot menu but system still wont load.
Did u try doing factory reset from boot menu
Sent from my MB855 using xda app-developers app
Yes i did try that along with every other option given system still not booting up... but another strange thing ive noticed is that the android recovery is now letting me choose what zip i want to install from my sd card although i cannot because everything keeps failing the signature check. Has anyone been in this same situation?
I think i flashed the ap20bl.img with sv1 but i havnt flashed the microboot because i didnt know what command to issue in fastboot mode. for the bootloader i typed something along the lines of "fastboot flash rdl3.bin rdl3_unlocked.smg" then i think it restarted to only the moto logo was there and i typed fastboot devices it showed my phone so i took the cg file from derpunlock and typed a command like fastboot flash boot cg42_000somthing.smg it said ok finished... ???
sunny530 said:
Has anyone ever seen this before? I have reflashed stock recovery to the phone and before i could switch options in the boot menu i was stuck to only rsd or fastboot. I am on 2.3.5 I sent rdl3 to the phone it restarted in bootloader or fastboot just a moto logo i sent the fastboot oem unlock command, peices of derpunlock and also a system.img. now i can choose android recovery in my boot menu but system still wont load.
Click to expand...
Click to collapse
are you saying you're on 2.3.5? if you are, your bootloader is permanently locked. it won't do any good to try and unlock it, unless you don't mind bricking. otherwise i have never seen this error before.
if you are on 2.3.5 i'd recommend flashing the electrify 2.3.5 sbf method to hopefully unbrick and return to stock.
Thanx for the reply na7q but I am pretty sure when software says unrecoverable error you have just killed it. When you torpedo root doesnt that kill the xorg server? as soon as its dead BAM!!! your rooted lol i would really like it if some very knowledgeable people on this subject would take a look at this and if they all tell me to do the same thing then 2.3.5 electrify here i come, However, i am not concerned of getting my phone in working order if my phone remains dead for the next few days i dont mind as long is it contributes to this bootloader being unlocked.
sunny530 said:
Thanx for the reply na7q but I am pretty sure when software says unrecoverable error you have just killed it. When you torpedo root doesnt that kill the xorg server? as soon as its dead BAM!!! your rooted lol i would really like it if some very knowledgeable people on this subject would take a look at this and if they all tell me to do the same thing then 2.3.5 electrify here i come, However, i am not concerned of getting my phone in working order if my phone remains dead for the next few days i dont mind as long is it contributes to this bootloader being unlocked.
Click to expand...
Click to collapse
with 2.3.5 you aren't unlocking anything. can almost guarantee it! it's going to take a miracle! i'd say just restore it with the SBF if possible and continue on with life haha. i rooted like a year ago so i don't remember anything about it at this point haha. the only thing that was important was unlocking the bootloader! we need a breakthrough on that for these locked users. that miracle hasn't happened yet. or even gotten close.
Try flashing signed boot.img. This seems to me like failed to boot 2 in other words.
You can flash almost anything into the phone, the signature is checked after reboot, so "flashing ok" in fastboot is normal feedback, sometimes even if it's not ok (radio).
Also with recovery, you can choose whatever zip you want, but when you hit install, signature is checked.
Well you see i receive no failure to boot 1-4 i just get stuck at the moto dual core screen with nothing written at the top. Is it possible that i flashed the bootloader sucsessfully and did not flash the microboot? i didnt know the command to issue to flash microboot. The unrecoverable bootloader error seems interesting to me how would i find out what kernal i should/can flash and what would be the command would it be in fastboot? can i install a system.img via recovery or install bootstrap through fastboot or stock recovery?