I updated my phone (HD2 T-mobile) via internet website and when I finished the updating process, the phone did not work at all.
I tried more than once to switch it on, but it didn't respond. I took the battery out and put it in again, but nothing happened.
When I connect the phone with the charger, the charger light doesn't become on.
It seems that the phone is dead!!!. What do you suggest to solve this problem? If you think it is a hardware problem, what is the name of this hardware
Tray update ROM again
It dose not Enter in bootload mode
How I can apdate rom from diffrent way
What rom did you flash? If it isn't a tmous rom then the phone is destroyed.
HD2-RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
This ROM's name
Please support us with a bit more of information.
You´ve got a T-Mobile device and flashed it with a different ROM for a HTC device without branding.
But what did you meant with "flash via Website"? How did you really flash (via Active Sync or via SD card)?
Did you install HSPL or at least SSPL first?
I Flash it via Active Sync
yes I Installed HSPL But sspl I didn't Install
Its dead,the radio in that rom has killed it.
Only options are JTAG or replace mainboard
Though it is strange that the filename says 2.10.50 for the radio version,since 1.66 roms usually come with ..51.. radios,which kill tmouses.
If it really is a ..50.. radio in a 1.66 rom then a tmous should boot but hang at splash, yet you say yours just won't start, so I suspect a typo in the filename. (Not your typo,I can see lots of references to that filename online.)
I am download this rom from HTC site
Mo7ammad_89 said:
I Flash it via Active Sync
yes I Installed HSPL But sspl I didn't Install
Click to expand...
Click to collapse
You said that you have a T-Mobile device, but you didn´t tell that it is the US version of it. Is it or do you have the European version?
If it is the USversion you really flashed the wrong Radio ROM.
For the European version it would be no problem
no My Mobile Is Us version
Mo7ammad_89 said:
no My Mobile Is Us version
Click to expand...
Click to collapse
So it seems you have bricked your device, I would recommend to bring it to a service point and hope that they do not notice what you have done.
Perhaps this thread is a last chance for you:
http://forum.xda-developers.com/showthread.php?t=668347
Good luck!
Thank You My friend But This chance Is Impossible becuse It's need to Enter bootload mode and I can't Enter It
check the pins where the battery connect they bend very easy so you dont get a connection the red light will come on when u charge and the phone wont boot! there are three pins make sure they are all makeing a connection! Its very common!
I am sorry but I don't understand you very well can you explain more please
Mo7ammad_89 said:
I am sorry but I don't understand you very well can you explain more please
Click to expand...
Click to collapse
In other words:
Take out your battery and check the contacts between battery and the deviceframe. Is any of them bent?
No It's Not Any Of Them bent I think
but why you ask About It
AM I can repair My Mobile by them
And If you can explain for me by picture I well be glad
Mo7ammad_89 said:
No It's Not Any Of Them bent I think
but why you ask About It
AM I can repair My Mobile by them
And If you can explain for me by picture I well be glad
Click to expand...
Click to collapse
Sorry, it was not my idea but from b3ltazar. His thought was that your device might get no power to work.
I recommend once again to bring your device to a htc service center in order to repair it. In my mind you seem to have an hardware issue
Related
Hi,
I did the popular mistake, tried to unlock with Universal Unlocker , thinking that this is the staff to unlock all the HTC phones.
Ok. What I have now:
NO GSM - we know that
Tried to install radio roms from here, nothing. I got the information about "Checking the information...." and it is hanging like this.
I made reser and HARD RESET aswell.
I tried to install a lot. Nothing helped.
I had radio ver. 1.05.... I remember that. I have my phone from T-Mobile from UK. I had everything nice, now I have four stripes - RED GREEN BLUE and WHITE and ther is written:
HERM300
IPL-1.01
HERM300
SPL-1.04
Can anybody help me ? I tried to download mtty.exe and put all the commands (not PASTE and it still not working.
Now is 6am in Lisbon. I was sitting all that night and I am finishing writting this post.
Help if you can, regards.
Ben
Have a look on this topic http://forum.xda-developers.com/showthread.php?t=280733
It did not help. Where I can get this Qtek rom ? Is that OK for my device ? I have VARIO II from T-Mobile.
I woul like to try instal this - DUMPED English ROM from TMobile Vario II from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
but i dont now how. There are 3 .raw files, how to put them to my phone ?
That solution didnt help: http://forum.xda-developers.com/showthread.php?t=280733
What else I can do ? I was trying with QTEK rom and a got white screen on the phone and 0% on the computer. It was hanging. I tried 5 times. Then I tried to install the Radio Rom from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
I choosed all of them. Nothing. All of them are hanging on:
Chencking the information on your device... Please wait..
Then there is a screen to update. After long time. So when I press the button is still the same info. Checking the information on your device... Please wait..
And its hanging. When I reset to bootloader again the soft telling me:
This ROM Upgrade Utility does not design for your device.
Please get probper ROM Upgrade Utility and try again!
Where can I get the radio version 1.05 for T-Mobile Vario II ???????????
Is there possibility to download from somewhere ?
Or maybe I should try other solution ?
Read "problem 5" here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Yes, I was tying point 5 few times. The problem is, I can connect through mtty.exe without any problems, but after soft reset, I am pressing POWER and OK button and going to bootloader mode again, and when I am trying to flash the extracted radio ROM (i tried all of them = 4) and there is a problem. nothing is working. I am waiting and waiting, and there is only info: Checking your device information or something like that. What can I do ? Sorry for my English guys.
Instead of flashing an extracted radio image try to flash a normal shipped rom (if possible matching your cid). Capture the process using usb monitor to see where exactly it fails and which error you get.
Where can I download
pof said:
normal shipped rom (if possible matching my cid).
Click to expand...
Click to collapse
?
I had RADIO 1.05 , that I remember, and have a phone from T-Mobile - MDA Vario II.
Benone said:
Where can I download ?
I had RADIO 1.05 , that I remember, and have a phone from T-Mobile - MDA Vario II.
Click to expand...
Click to collapse
No rom matching your cid is available then, use the TyTN 1.18 rom.
pof said:
No rom matching your cid is available then, use the TyTN 1.18 rom.
Click to expand...
Click to collapse
I tried that ROM 2 times, once I plugged with holding camera button and second time without. I made monitor of QTEK rom aswell, because its the one which is changing phone screen from red green blue stripes to completly white. But nothing else is doin...
A attaching logs in zip file below. I have 3 files from each session, I dont know which are correct, 2 of them i saved and 1 is exported.
What do you think ?
I used USB-monitor from http://www.hhdsoftware.com/
very weird... usb seems not working but for what you say bootloader seems to be ok. Are you sure this was after patching the radio with universal unlocker? it seems totally a different problem :-$
I guess you'll have to wait until t-mob releases a ROM matching your CID and then flash it using the hermimg.nbh sd-card flashing method.
You can also try to connect to it via serial, I have no experience on that, but a search on these forums might tell you how...
keep us updated
How long I have to wait ?
Should I go to T-Mobile when I will be back to Scotland and tell them what I did or what ? Did I lose my warranty ? Do you know approximately how much they will charge me for flashing my phone ?
Do I really have no chances to repair it by myself ?
Benone said:
How long I have to wait ?
Click to expand...
Click to collapse
Until t-mobile releases a rom with your cid... it can be today or next year, I don't know.
Benone said:
Should I go to T-Mobile when I will be back to Scotland and tell them what I did or what ? Did I lose my warranty ? Do you know approximately how much they will charge me for flashing my phone ?
Click to expand...
Click to collapse
I don't think you lost the warranty. They usually charge about 100 eur for flashing it back in the service centre. They do it by inserting a diagnostics sd card, but we don't have it for the Hermes
Benone said:
Do I really have no chances to repair it by myself ?
Click to expand...
Click to collapse
You can try flashing over serial port, and you can try sd-card flashing, but for sd-card flashing you need a rom matching your CID first.
Eureka!!!
Finally I made my device working again!
And I dont have simlock !
After trying everything.... ufffff.
THX !!!!!!
1) I downloaded ftp://xda:[email protected]/Hermes/Tools_and_Programs/HTC_Hermes_SIM_Unlock_v1.zip
2) Reset my phone in bootloader mode.
3) Plug USB cable.
4) Run HTC_Hermes_SIM_Unlock_v1.
5) After 20 min. my phone said ELO to meeeee He did not have simlock when was saying that.
YE YE YE
That was simple. If you have any Hermes radio problem, try that first - HTC_Hermes_SIM_Unlock_v1.
Will be more often here, forum seems to be really interesting.
YO!
Yipie
Glad it worked
Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.
First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00
and happened again when I updata the ROM (OS only)
Q:
1. How to solve this?
2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?
3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data
6 to 9
but seems no change
I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
hanissusa said:
I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
Click to expand...
Click to collapse
This thread was hardly 1 hour old and you make a rather rude statement. This forum is supported by volunteers, not people that sit around all day waiting for posts to come in and find a solution that drops out of no-where.
hanissusa said:
I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
Click to expand...
Click to collapse
You are not going to make any friends this way mate. If you want quick solutions then read all the material that's on here and search for the answer yourself.
If you don't want problems then leave your phone in its standard state.
WB
@camus_dvd: have you checked out the wiki? There may be a solution there. If not, you need to give us more info?
Have you ever successfully flashed before?
Give us Versions? Windows, ActiveSync, .NET, ROM, RUUWrapper (e.g. is it the custom or a standard shipped), etc.
Did you try removing the battery for a couple minutes?
Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?
These answers will help us help you.
Oh, and about the volume issue, try using the google search link in my sig to search the forum for "hermes low volume tweak" or something like that. I had a similar problem, but cannot remember the tweak. I do not THINK It was the one you posted.
Heck - onew final edit. I got curious and did the searching. You will find a thread HERE and it references a tweak in the wiki HERE HERE . Hope this helps.
@hanissusa: sorry you did not get any "intelligent" answers. If you are unhappy, you are not a prisoner here.
If you want quick solutions then read all the material that's on here
Click to expand...
Click to collapse
I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?
Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.
The reason I tried to flash my radio bootloader is because suddenly the phone started to freeze(about every 30 mins). I thought may be the operator has a new radio version so I need to upgrade in order to get the best connection and most importantly never have my phone freezed again.
Did you try removing the battery for a couple minutes?
Click to expand...
Click to collapse
Tried about 20 times, still unable to flash radio rom with any of the available versions. Always freezes at 0% thru RUU, if I use SD card method freezes in the 10-15% range. I am able to flash everythin, including SPL, operating system, but not the radio rom !!!
Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?
Click to expand...
Click to collapse
Tried that as well. Tried using MMTY, checksum gives me radio error.
sorry you did not get any "intelligent" answers
Click to expand...
Click to collapse
I got several answers of this type:
"Go read Wiki"
"Go try this method"
and I have done all of it and nothing helped the problem.
You can consider above answers very intelligent, however I did not get a single anser form POF or Olipro - people who actually created this software and know most of the tricks.
for me same problem, only that i can't use my device anymore( : I tried to install another rom, Hermes_WM6_WWE_vp3G_v3[1].61.0_ATT_Full.rar and Touch_I_interface_beta.zip and crashed. and now, i enter in bootloader, if i want to make super cid it tells me to connect the pda even if is connected. and if i try to install other roms is stuck on 0%
hanissusa said:
I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?
Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.
Click to expand...
Click to collapse
I wonder what kind of institution gave you said degrees? I have a degree in Japanese and Linguistics but I suck at both.
hanissusa said:
"flashed my device and made super CID, so its fully unlocked"
Click to expand...
Click to collapse
Flashed and superCID does NOT mean fully unlocked. If you can read programming and or networking text books, I don't understand what is so hard about the wiki?
If you read everything and actually tried to understand it all, then you would know that flashing the radio is inherently dangerous and that 9/10 times the radio is not the issue.
camus_dvd said:
Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.
First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00
and happened again when I updata the ROM (OS only)
Q:
1. How to solve this?
2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?
3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data
6 to 9
but seems no change
Click to expand...
Click to collapse
Read here:
http://forum.xda-developers.com/showthread.php?t=332565
then here:
http://forum.xda-developers.com/showpost.php?p=1177210&postcount=5
or from here:
http://wiki.xda-developers.com/
then read the stickies and do a search.... it's all been discussed before
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
Is there a senior, experienced member on this forum from London, UK ? Please help me fix the radio, beers and drinks are on me.
ady_uaic said:
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
Click to expand...
Click to collapse
Is this what you are looking for?
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
@hanissusa,
Why don't you just send your device back to the repair centre, foot the bill, and put it all down to experience? You may have a hardware problem that nothing on here might solve.
You might be better off going down that route than going through the pain of trying to sort it and not getting anywhere. Also stops you p**sing people off on here. You can't claim that just because you have had a bad experience we should all stop flashing our devices.
We are all aware of the risks and if we can't fix it then its put your hand in your pocket time and send it back to be repaired.
Good luck with it; hope it all works out.
WB
thx a lot. I will try it, 'cause i'm tired to use all kind of stufs
my first SPL was 1.03 but after a try of upgrading ROM it was modifed in 2.03 and i think this is the problem. does anyone knows how to modify it?
how can i downgrade my SPL ?
pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.
Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?
hanissusa said:
pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.
Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?
Click to expand...
Click to collapse
Have you called the repair centre to see whether they will fix it or not? Your worse case scenario is that they say no. There again they might say yes, especially if you are willing to foot the bill, or put you in contact with another company who can sort it out for you.
I really do hope you can get it fixed; however I think you have started out on the wrong footing on this board and you may well find that people on here now just don't want to help you out (please don't shoot the messenger).
Good luck with it.
Cheers
WB
ady_uaic said:
how can i downgrade my SPL ?
Click to expand...
Click to collapse
You can't without a running OS setuped on your device. If you don't have the HardSPL you should try to flash with the default flasher AND a rom matching your CID.
If there is a rom matching your CID out you may have quite good chance to get your hermes back to live. Toying without hardspl is a really bad thing
and that hardSPL how can i do it?
Have you called the repair centre to see whether they will fix it or not?
Click to expand...
Click to collapse
Which centre should I call if I live in London, UK ? Maybe somebody wants to help me fix this and get paid ?
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
hamed_ppc said:
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
Click to expand...
Click to collapse
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
eraserbabyboy said:
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
Click to expand...
Click to collapse
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
hamed_ppc said:
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
Click to expand...
Click to collapse
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
eraserbabyboy said:
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
Click to expand...
Click to collapse
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
hamed_ppc said:
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
Click to expand...
Click to collapse
I don't know. In my country I have a htc services and they say to me that my motherboard must be replaced because is to hard to change only radio chip and they only change all motherboard. For 350 Eur(+some Eur) I can by new Tytn. Now I use my pda in my home (in toalet) via wireles to look internet. Work's fine, but sometimes freeze OS and I must do soft reset.
ok guys , i might found a temp solution or maybe it will work permenantely with some one , but i need some one who have spare time and steel nerves coz i'm sick and tired of trying many files and roms and radios .
so any one is willing to start this experiment with his hermes and his spare-time lets begin .
first of all i want to declare that this method revived my radio and i used my device for one day just fine receiving and making calls . then the next day i decided to make a hard reset to see if the radio will stay working , and the result was the radio was dead .
here we go .
1.flash you device with GM360 gold edition http://forum.xda-developers.com/showthread.php?t=329282 don't ask why just try it .
2.after the phone is flashed with gm360 and working ok with no radio or "no gsm" messege now you should flash your phone with your device manufacturer WM5 ROM .
3. to flash WM5 rom you need to follow mr.vanx guide for safe WM5 downgrade . http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=27&Itemid=26 here it is .
4. now after you've flashed WM5 successfully and your device is also working fine with it but still no radio or "no gsm" . you need to flash only radio to your device . no OS only the radio .
5. download this radio . http://forum.xda-developers.com/showthread.php?t=334697 and unrar it on some folder . and don't flash it yet to your device .
6 download Olipro RUUwraper 5.2 http://forum.xda-developers.com/showthread.php?t=298737 there u go.
7. now the files from step "5" which they are the radio 1.54 put the file ruuwrapper from step "6" in the same folder with them to start the radio upgrade using "RUUWrapper.exe" not "ROMUpgradeUt.exe" . when u run it you will have multiple choices , choose "Force Unsafe SSPL (not recommended)" . .
now the radio upgrade should go smoothly as it went for me the first time . after the radio upgrade is done u should be able to use ur radio fine .
now can some one take half the effort of me writing this long method and try it ? thanx for the feedback also .
good luck for all .
feedback
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
a-h-t1,
thx for your discription,I'll try your method as soon as i can(because ADSL isn't much available!!)
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???[/QUOTE]
Hamed I dont know what's happened with my hermes, because I get him with the no gsm error. I have a bootloader 1.09 with enable kitl mode. In PB I lose many, many night to boot os but without sucess. And post many question here, but without answer, a-h-t1 is the first men who try to help and meny 10x for that.
So, before 2 week I send my hermes to Imei-check and before few days I get it back with bootloader 1.01 mfg and instruction from imei teamroblem_Description: The radio chip is faulty 100%. Now the handset is usable as PDA only (wifi + bluetooth working too), but not as a phone (the GSM module refuse to answer/flash).
DO NOT attempt to upgrade the firmware in the phone with a firmware which has RADIO upgrade, as it will put the handset back to the brick mode!!!
Model is SVP3100.[/COLOR][/COLOR]
After that I put the SPL 2.30 Olipro to prevent any future damage, and continuing to "play" and experiment, because I don't have more than, to loose. I have P3300 who work's very nice....
It's possible to boot any OS without radio. (I use nbh tool 1.01 to extract nbh file to nb and after make Ruu_signed but without radio).Also try metod via SD card and same to you, stop when try to flash radio. Also it's happened on 12-13%(independed of the rom version) when start full RUU upgrade. And when try to flashing only radio they stop on 0%. On 12-13% ruu upgrade try to flash radio in this moment, and this is the end. I am not sure is this hardware problems, but imei (I dont belived too much) said YES. In win OS I don't have a imei identification (in device info/identity) and of course radio version is blank. Sometimes happened that os blocked(freeze) or device just totaly go to power off mode and I must to do soft reset. Is any way to totaly disabled phone function in registry? I mean that freeze when phone try to find network or sim, but I am not shure. Last night I open my devices, and get out motherboard, just to see this famously radio chip. It's not possible in "home made" to change yourself this chip. Only if I have a more lucky and found some broken hermes with ok motherboard for 100-150 eur...
I hope that my info just little help to you to know "mystery" about our problems.
And one more time 10x to a-h-t1!
eraserbabyboy said:
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
Click to expand...
Click to collapse
I just tried it and same result like you
but many thx for a-h-t1 and eraserbabyboy's help.now I want to try fix it in hardware way!!
but if anyone has idea about our problem please say here.i think it's going to be common problem,because i see many people in xda who has the same problem.
Read this, to see how I solve my problem. But I still have a hope, that it's not hardware problem and in the future I hope that someone will found software key to solve our corrupted radio.
http://forum.xda-developers.com/showthread.php?t=338413
ok,i think it was almost three months ago that i had posted my last post!!
you know my problem and i feel it has became a common problem for poeple who have hermes,unfortunately.
last week,i found a service man who believed that my phone's problem is fixable.
so i gave my pda to him,and because he lives in another city,i returned to mine and waited for him.
yesterday i phoned him,and this is what he said to me:
"first,I tried software methods,but the result was nothing!then I disassembled the device and changed the piece of RF of your ppc.it hung first,but now it loads the windows and find the antenna too!!but immediatly after finding,it hangs."
he has used the Dopod's RF in my htc TyTN and thinks that this problem(hanging after finding the antenna) is because of not matched radiorom.
I have good feel about his say,and i'm trying to help him find the correct radio rom,because he is so busy and cant search the internet to find the radiorom.so I've mailed him the link of wiki's radio rom for hermes and I hope someday this tragedy will finish but i'm not sure.
if anyone have comment about this case please help us,specialy about the RF,because I don't know anything about the Radio Frequency.
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
1a
Its called a 1a brick. Look in the sticky brick section. like 170+ pages of this issue. I believe I have the same device. No GSM/ no imei no radio. Can flash rom's all day long, as long as rom doesnt include GSM. Try to flash ANY GSM does nothing, let it sit 10hrs... Nice free PDA, till i can figure out the wiki & there must be hope for me. Till then my wiz100 keeps rocking. Like the 8525, but wanted it more as a phone then just pda.
nicknowsky said:
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
Click to expand...
Click to collapse
I hope you will fix your device,but when I read about your solution,I felt that guy who brought back to life your device,has just used a ROM whitout GSM,the way that we have been using since months ago.if I'm in mistake so tell us more.
The end of the Tragedy
o0o0k!!
as I've said in my post,the service man that I love! replaced the RF of my pda,but new problem was hanging after finding the antena!!
as he told me yesterday,he tried another used RF,but this time the TyTN's one and it worked) and there is no problem.so after 4 months nearly I can use my pda.
as soon as I can,I will go to get my device and test it myself.
be wait for my smooth experience!!
What is this???
replaced the RF of my pda
Andrey_ORIN said:
What is this???
replaced the RF of my pda
Click to expand...
Click to collapse
its full name is RFSP=Radio Frequency Signal Processor.it's one of ICs on your Hermes mainboard.it needs a professional to replace.I'll explain more early.
but if you have same problem and have tried all of the the wiki methods then you can test my solution.
Hey all,
Got my HD2 not too long ago after the first one I got was DOA(it wouldn't hold calls).
Anyway I just want to ask for some advice. I'm with Optus prepaid. Ive managed to setup my phone to send MMS and they are properly sending and receiving. The problem is, I cant use the internet. It wont connect. Anyone here got this working with optus?
Secondly, when I put the phone on loudspeaker, the screen wont turn off. The lock button is the hang up button so I cant just hit that. Is it possible to switch the screen off when in loudspeaker?
Will installing a cooked ROM unlock the extra RAM thats in the phone?
My phone software versions are as follows:
OS Version 5.2.21869 (21869.5.0.82)
Manila Version 2.5.20121431.1
ROM Version 1.72.841.0(82124) WWE
Radio Version 2.04.51.22_2
If I want to change the ROM, can anyone suggest something which looks close to the original but has better performance(speed, battery wise) and does not have stability issues? I really want to ensure I do everything right and not brick my phone. I read something about installing wrong radios can brick the phone.
Does anyone know where I can dl this version of the Telstra ROM? Ive got the 1.49 one.
Currently wanting to install this. Energy.Leo.23673.Sense2.5.Cookie.DinikGlass.Jul.24
Would this ROM give any issues with my phone? Is it just a matter of install and away I go or will I be required to punch in a whole bunch of settings.
This is a messy post but any info would help greatly.
Thanks guys!
SargeRX8 said:
Hey all,
Got my HD2 not too long ago after the first one I got was DOA(it wouldn't hold calls).
Anyway I just want to ask for some advice. I'm with Optus prepaid. Ive managed to setup my phone to send MMS and they are properly sending and receiving. The problem is, I cant use the internet. It wont connect. Anyone here got this working with optus?
Click to expand...
Click to collapse
once you flash a custom rom, chances are it will contain teh standard connectionsetup which will find teh correct settings anyway.
Secondly, when I put the phone on loudspeaker, the screen wont turn off. The lock button is the hang up button so I cant just hit that. Is it possible to switch the screen off when in loudspeaker?
Click to expand...
Click to collapse
try doublefinger tapping (two fingers, single tap, turns off, then i use home key to bring screen back on) on the callers image, this works for some roms, probably more likely to work once you change roms.
Will installing a cooked ROM unlock the extra RAM thats in the phone?
Click to expand...
Click to collapse
yes, assuming the rom is based on a tmous core, and you flash a matching radio.(which the rom would require anyway, its a two part process, a 576 enabled rom and a x.xx.50.x radio)
I read something about installing wrong radios can brick the phone.
Click to expand...
Click to collapse
not your phone, tmous (t mobile US) phones only need to worry about that.
Does anyone know where I can dl this version of the Telstra ROM? Ive got the 1.49 one.
Click to expand...
Click to collapse
google knows, dozens of posts on here know
Alright I got my hands on the same rom Ive got on my phone incase I break anything.
I just need a 1.42.000 spl thingy. Which rom do I need?
not sure what you mean, , , the rom you just found will include 1.42.0000
spl is part of all official roms, its not something you can download on its own. Only in official roms, or by using hspl.
I am trying to go to the HTC support site to get the official 3.14 ROM for my HD2 which I need to return to tmobile because it keeps hard-freezing on me and I'm pretty sure it's hardware related, but if I return it with HSPL they will slam me, so I need the original SPL and everything on this,
when I get on HTC Support site I cannot, for the life of me, find where I can input my S/N and get the right ROM for my phone, anyone got a link?
No tmous roms on HTC site, go to T-Mobile.com instead.
lol, thanks
Hey Orangekid when you get the official ROM from T-Mobile downloaded would you mind dropping it in a e-mail to me, my e-mail address is in my profile info. I got me another laptop because I was stupid and busted the screen on my other one. Anyway everytime I enter my IMEI into the T-Mobile sight it says it does not recognize my IMEI. I had a copy of the stock ROM on my other computer just in case I ever needed it. And I don'feel like having to on the phone with T-Mobile costumer service for two hours like I did the last time I downloaded the ROM from T-Mobile, they had to generate a generic IMEI for me.
T-Macgnolia said:
Hey Orangekid when you get the official ROMfrom T-Mobile downloaded would you mind dropping it in a E-Mail to me, my e-mail adress is in my profile info. I got me another laptop because I was stupid and busted the screen on my other one. Anyway everytime I enter my IMEI into the T-Mobile sight it says it does not recognize my IMEI. Ihad a copy of the stock ROM on my other computer jist in case I ecver needed it. And I don'feel like having to on thephone with T-Mobile cosumer service for two hours like I did the last time I downloaded the ROM from T-Mobile, they had to generate a generic IMEI for me.
Click to expand...
Click to collapse
Weak.
I'll upload the nbh and email you the link as soon as I am done flashing, give it an hour tops for the whole process.
orangekid said:
Weak.
I'll upload the nbh and email you the link as soon as I am done flashing, give it an hour tops for the whole process.
Click to expand...
Click to collapse
Thanks man, I just like to have a copy of the stock ROM handy in case something goes south on me.
But seriously I was on the phone for two hours last time, I don't even want to try that rought again.
I wish I new of a way to make a network between my new and old laptop without having to actually set it up on my old laptop.
T-Macgnolia said:
Thanks man, I just like to have a copy of the stock ROM handy in case something goes south on me.
But seriously I was on the phone for two hours last time, I don't even want to try that rought again.
I wish I new of a way to make a network between my new and old laptop without having to actually set it up on my old laptop.
Click to expand...
Click to collapse
lol I hear that...
Couldn't find your email, PM sent with the download link.
stock rom 1.66 for my phone in O2 network
Hi there.
I am looking for a stock rom 1.66 for my HTC HD2 which I have in O2 network. My device's number is: P/N:99HJY070-00. When I am trying to install another ROM there is information on my phone's display saying "not allow".
Can somebody please let me know where can I dowload it? Any links would be very helpful.
Any other advices are welcome here.
Many thanks
There is no 1.66 o2 rom, branded 1.66 roms are version 1.72, and you will find it on the HTC website.
If you want unbranded 1.66 you need hspl. Use hspl2, choose 1.66.hspl then flash the 1.66 over USB.
At the moment I don't have any soft on my phone, the main problem is that I can't connect my Phone to PC- my laptop doesn't see the phone,so I can't do anything.
I would install HSPL if it was possible, but at the moment I can't.
So that is why I am looking for a ROM which I could install by using memory card.
Any ideas?
When phone is in bootloader and you connect USB, if word serial changes to USB you can flash. Wmdc/activesync wont see it in bootloader, but rom flashing/hspl will still work.