ok may of screwed up , motorola atrix
system version--- 4.1.83.MB860.ATT.en.US
model number---- MB860
android--- 2.2.2
basband,--- N_01.77.15P
mororola webtop ----OSHWT_U1_4.257.30
ROOTED with gingerbreak
installed clockwork recovery from rommanager app (i dont think this works)
ok i got the bright idea to download and try to install latest gingerbread ota stock update , well phone reboots and tries to install but gets stuck at
failed to boot starting rsd mode , im guessing because of clockwork recovery ? so i can pull the battery and restart phone boots up just fine but after about 20-30 seconds phone will restart again by it self and retry to install that att update ??? so my question is how to i make update stop trying to install and get clockwork off my phone ??remember theres only a 20-30 second window before it powers off on its own . ive tried mororola web site to factory reset or install factory software but phone dosent stay on long enough to run program , if i can just get factory update to stop trying to install ...
i figured out on my own got back to stock with stock gingerbread now installed , this phone sucks and no one owns it ive never asked xda a question and had NO ONE reply ,GUESS I SHOULD HAVE known BETTER IF CYANOGEN TEAM DONT WANT IT , returning this phone for a jitter bug
Related
hi there everyone.does anyone out there have rom manager working on the streak running 2.1 8105.cos im pulling my hair out.im thinking that the clockwork mod does not support 8105 cos when i try to boot into recovery it does reboots as normal ie dell logo then o2 bubbles screen.ive done everything i think i should have ie rooted using universal androot flashed the clockworkmod on rom manager itself.im a bit new to all this.im doing as much research as i can.i just cant find anything helpfull.im sure you guys can help.
Same here Unlocked Streak with 8105 O2 2.1, Androot and actual Rom-Manager from market.
Neither making backups nor booting to recovery works.
new update
becouse my phone gets the black screen when trying to boot into recovery.ie choosing option 2 on the boot recovery screen then the screen goes black instead of going to the clockwokmod recovery screen.when the new update comes out will it work.cos thats how update.pkg is instaled. i installed the leacked 2.1 6941 build.via update.pkg.the only reason i tried rom manager was to put 2.2 on my phone.maybe i shouldnt have put the 8105 update on my phone cos if my phone dont do ota updates i dont know what to.im gonna try reading some guides on here and modaco and see what i can pick up there.just hope i dont brick it.lol
Yea. I tried ROM Manager too. I'm still on AT&T 1.6, with no luck. I wonder if it works with 2.2? I guess that program would be too easy...
Still kinda waiting for the official 2.2 update cuz I'm affraid I wont be able to get back to 1.6 if I want to return the phone...
works
hi all check this out
http://forum.xda-developers.com/showthread.php?t=803682
its works with me after upgrading to an official 2.2
baseband: ...31800
hope u can do it well
if u have any question , we are ready
Repeat post, and I have no idea how I did that...
I wanted to change the kernel from my P500 to solve the lag problem and get better overall performance.
I rooted the phone using gingerbreak 1.20
after that i installed from the market Rom manager restarted the phone, and i backup the phone from there.
After that I got stuck with my kernel replacement and I gave up and I wanted to reset the phone to default state. I didn't do anything to my phone.
I unrooted the phone and did the factory data reset.
Now when I reboot the phone and press power+volume down+home I still get the Clockworkmod Recovery boot menu. In an untouched P500 what do you get when pressing that combination? Is there any way to make my phone 100% factory state ?
sorry for my bad english
u should even delete the recovery.....(TO get rid of it)
the recovery is on the sd card, right? i formated the sd card... so there is nothing related to rom manager...
u must try flashing the default rom from the devlopment forum.(KDZ Updater)
blah
if i wait for gingerbread update will the update solve this?
The Recovery is not on the sdcard.
Go here:
http://forum.xda-developers.com/showthread.php?t=1065197
and download the file "Original_Recovery_thunderg.zip" (or something to that effect) and flash it through cwm. This will restore the recovery as it was originally.
The zip is unsigned so you will have to toggle signature verification in cwm recovery.
@mihir he doen't want to get his recovery back(in other word he wants to remove it).
@soberspine http://forum.xda-developers.com/showthread.php?t=944881 check dis thread and install the original rom...
@devil the original recovery zip in the link will restore the condition of the recovery to factory condition, i.e remove it.
this android reminds me of installing windows 95
the new unpdate to gingerbread will come out next month, so the update to 2.3 will get rid of that boot menu and other things that where changed when I installed Rom manager? in other words will the phone go to factory state before rooting/unrooting and stuff.
Yeah most probably the recovery will be cleared if and when you update to gb. But if you want to clear it now use the zip, it works.
Sent from my LG Optimus One P500 using XDA App
I don't think you'll be able to update to GB from a custom ROM or rooted phone. Even if the option comes up, it is recommended to go back to stock state (without recovery and root) or else it might cause problems.
i didn't installed any custom rom. the only thing I did was to root my phone using gingerbreak and then installed rom manager.
the only thing that changed to my phone is that now it has that boot menu clockworkmod.
now i unrooted my phone.
So it is not safe to make official update even if the only change is that i have on my phone clockworkmode?
Step by step picture guide to completely restore to open-box state using KDZ updater
did this for thousands of times and if you are doubted in any steps feel free to ask me
btw for your question, an un-touched optimus one pressing the recovery combination will result in
a stable image of an android jumped out of a white-rectangular box
a bar at the bottom loading
but that's it, nothing more no matter how long you wait
Also for your updating question:
LG WONT recognize your phone with their official updating tool only when you are ROOTED (so of course when you perform any other steps after rooting, it wont either... e.g. installing custom recovery, flash roms etc)
BUT if you go back to the original thing with KDZ, LG will update anything for you -tested by myself!
thank you for all the clarifications and the tutorial.
I will wait now for the new android 2.3 release and ill do the whole thing then.
It is possible after rooting and installing clockworkmod the phone to work slower?
It feels like the phone is responding slower or maybe is just me imagining things .
hehe. nothing like that.
soberspine said:
thank you for all the clarifications and the tutorial.
I will wait now for the new android 2.3 release and ill do the whole thing then.
It is possible after rooting and installing clockworkmod the phone to work slower?
It feels like the phone is responding slower or maybe is just me imagining things .
Click to expand...
Click to collapse
r291 said:
hehe. nothing like that.
Click to expand...
Click to collapse
ur welcome
Right, it wont be slower dont worry
Ok, here's the deal:
Rooted the device, everything was a-ok.
Installed Clockwork, everything still a-ok.
Tried using mod manager to install Cyanogen nightly 9, phone rebooted and the progress bar for the mod install wouldn't move. I waited for a while and eventually manually turned the device off as it wasn't making any progress.
Ever since, it won't go past the screen you get at the beginning (w/ the yellow sign indicating an unsecured rom). It just stays there forever.
What I have to work with:
- Clockwork Recovery is available.
- The device is recognized by Odin when in download mode.
- The device is not recognized by the computer/Kies.
What I've tried:
- Followed the instruction for boot loop w/ both stock rom and Villain (no dice).
I'm sorta freaking out now. I have yet to see anyone having the same problem online and I really hope it's not bricked - a 600$ paperweight...
Is there something else I can try? Is it possible to flash stock PIT/Bootloader/PDA/everything else? If it is, would it fix the problem?
Please just point me in the right direction.
Thank You,
Edit: In recovery mode, the following error appears:
- Can't access to "/system/csc/VMC/system/"
Edit: In download mode, the current binary is set to "Samsung Official". Therefore I think this isn't the problem.
Edit: OMG OMG holy crap. Problem has been solved. Got a friend who had the same phone from the same provider to tell me what the firmware for the phone was. Downloaded it. Installed it w/ Odin. I almost turned religious when it booted a bit slower than what I remembered. It works well enough now, although I will probably go exchange it for a new one ASAP, before my warranty expires.
If anyone has similar problems. Don't panic and re-install stock firmware.
Cheers Folks!
Rovah said:
Ok, here's the deal:
Rooted the device, everything was a-ok.
Installed Clockwork, everything still a-ok.
Tried using mod manager to install Cyanogen nightly 9, phone rebooted and the progress bar for the mod install wouldn't move. I waited for a while and eventually manually turned the device off as it wasn't making any progress.
Ever since, it won't go past the screen you get at the beginning (w/ the yellow sign indicating an unsecured rom). It just stays there forever.
What I have to work with:
- Clockwork Recovery is available.
- The device is recognized by Odin when in download mode.
- The device is not recognized by the computer/Kies.
What I've tried:
- Followed the instruction for boot loop w/ both stock rom and Villain (no dice).
I'm sorta freaking out now. I have yet to see anyone having the same problem online and I really hope it's not bricked - a 600$ paperweight...
Is there something else I can try? Is it possible to flash stock PIT/Bootloader/PDA/everything else? If it is, would it fix the problem?
Please just point me in the right direction.
Thank You,
Edit: In recovery mode, the following error appears:
- Can't access to "/system/csc/VMC/system/"
Edit: In download mode, the current binary is set to "Samsung Official". Therefore I think this isn't the problem.
Edit: OMG OMG holy crap. Problem has been solved. Got a friend who had the same phone from the same provider to tell me what the firmware for the phone was. Downloaded it. Installed it w/ Odin. I almost turned religious when it booted a bit slower than what I remembered. It works well enough now, although I will probably go exchange it for a new one ASAP, before my warranty expires.
If anyone has similar problems. Don't panic and re-install stock firmware.
Cheers Folks!
Click to expand...
Click to collapse
Same problem. anyone?
Vincho said:
Same problem. anyone?
Click to expand...
Click to collapse
Did you read the answer ???
jje
Look online (samfirmware), ask friends or on forums for anyone who has the SGS2 w/ the same carrier in the same country and try to find the firmware version (I9100***** - the stars are letter codes). Then just download that firmware and use Odin to install it.
If you can't find it,you presumably could just flash any stock firmware and it might work (or it might make things worse, try at your own risk)
Rovah said:
Tried using mod manager to install Cyanogen nightly 9, phone rebooted and the progress bar for the mod install wouldn't move. I waited for a while and eventually manually turned the device off as it wasn't making any progress.
Click to expand...
Click to collapse
The progress bar not moving is a known issue with the CM7 Recovery. All you need to do is wait for it to say that it's finished. There is nothing wrong with your phone and no need to return it. You just cancelled the CM7 install part way through which meant not all required files were installed on the phone, causing it to not boot.
As for it taking longer to boot into android after the odin reflash. That's because it has to build up it's dalvik-cache again. This is completely normal any time you install a new rom. It only happens on first boot of a rom.
So again, no need to return your device and feel free to try CM7 again. Just remember to let it finish even if the progress bar isn't moving.
Ahh. Ok that makes sense. This ought to teach me to read before screwing around w/ my phone.
I wanted to exchange it because I wasnt sure i'd still be able to install official Samsung firmware updates through Kies.
Suppose an official 2.3.4 firmware comes out, would i be able to install it through Kies?
Sent from my GT-I9100 using XDA App
Rovah said:
Ahh. Ok that makes sense. This ought to teach me to read before screwing around w/ my phone.
I wanted to exchange it because I wasnt sure i'd still be able to install official Samsung firmware updates through Kies.
Suppose an official 2.3.4 firmware comes out, would i be able to install it through Kies?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yes, as long as the firmware you're flashing is the same as the stock version that came on the phone. And even if not, you'll get the kies updates for whatever region firmware you did flash onto the phone.
I see. Thanks a lot!
Is there any danger to flashing firmware from a different region than the one youre from?
Sent from my GT-I9100 using XDA App
ok so yesterday i rooted my telus fascinate and i was going to isntall the MIUI rom. Following a guides instructions i installed rom manager and did a clockwork mod recovery, i then put the rom on my root file of my sd card and tried to install it through the "install rom from sd card option" on the app. Problem was i only got into the stock recovery mode and not the clockwork one it aslo gave me signature failures. I then followed the guide of this video:
http://http://www.youtube.com/watch?v=Q7xV0yE9ZcA
when i installed the kernel everything went fine but then after i got into CW recovery and installed the rom my phone booted and it just kept repeating the normal splash screen (it said galaxy I9000 instead) followed by a screen that said something like cryogenic mod. I got freaked out from here and tried to install stock kernels to get my phone running. As of right now my phone will boot but only stay on the splash screen. I can not access recovery mode. I really need some help, thanks.
these are some of the files i used:
the rom i used,
http://http://forum.xda-developers.com/showthread.php?t=1150045
the kernel i used,
http://http://forum.xda-developers.com/showthread.php?t=822756
thanks
the links are broken. Did you install a rom / kernal specifically for the telus fascinate?
i believe it could have been for the galaxy I9000,
ill try to fix the links btw
update*
i managed to get it into clockwork recovery mode by holding the dam buttons for a solid 5 minutes, after doing this i pressed factory reset, now my phone is stuck saying:
-- wiping data...
Formatting DATA
0_0' im not having a great day
http://forum.xda-developers.com/showthread.php?t=1227807Until I know what version miui and kernal you are trying to flash, it's hard to help. It definately sounds like your phone is soft bricked tho.
Edit* Here are some links you should read up on.
http://forum.xda-developers.com/showthread.php?t=923712
http://forum.xda-developers.com/showthread.php?t=1227807
try to type this inot your browser:
http://forum.xda-developers.com/showthread.php?t=1150045
aswell as this:
http://forum.xda-developers.com/showthread.php?t=822756
it takes a little longer but i cant fix the links sorry.
So as of now i got i managed to wipe all of the data on my phone and i am in recovery mode, if i click reboot it does the same thing and stays on the boot screen. If i click the mod from the sd card it flashes from the normal model number screen to one saying cryogen mod. It then keeps going back and forth with a flash of a screen that has a bunch of commands on it for about 2 seconds
brodydj said:
try to type this inot your browser:
http://forum.xda-developers.com/showthread.php?t=1150045
aswell as this:
http://forum.xda-developers.com/showthread.php?t=822756
it takes a little longer but i cant fix the links sorry.
So as of now i got i managed to wipe all of the data on my phone and i am in recovery mode, if i click reboot it does the same thing and stays on the boot screen. If i click the mod from the sd card it flashes from the normal model number screen to one saying cryogen mod. It then keeps going back and forth with a flash of a screen that has a bunch of commands on it for about 2 seconds
Click to expand...
Click to collapse
The rom you are trying to flash is for a i500 fascinate. I suggest taking the time to do alot of research before you turn the phone into an expensive paperweight. Read this link!!
http://forum.xda-developers.com/showthread.php?t=921285
K well i ran that rom and it works now but he only problem is i dont have any cell service, do you know how to fix that. I know that you are probably laughing at my mild retardism at this subject but i am a big noob. As for what you said in your previous reply is their an MIUI version for the fascinate from telus because i basically rooted my phone so i could get this rom.
thanks
Update*
i followed the instructions on the link you posted and chose the rom for MIUI I9000 as the one i was going to install but when i istall zip from sd it only says installed correctly and then when i reboot it keeps changing from the sgh-t959d to the galaxy s cyanogen screen
yea your boot looped now. I would run the rom that worked just install the compatible radio and kernal for it and you should get cell service back.
ok thanks i got all my cell service back and i got the MIUI rom to work. Now to just ry to remember all the apps i had
Your welcome...glad you got everything working!
After countless hours of research, I decided to unlock my bootloader and to root my Motorola Atrix 4G. With success, I was happy to have everything working and installed the Darkside Custom Rom. I let a friend borrow my phone, and they saw the AT&T system update and they decided to install it. They bring back the phone and the system update has finished and was installing. The phone powers off and starts to install the update. 10% into the install, it stops, and I got the little green droid man with the /!\ behind him. I take out my battery, place it back in after 30seconds. It powers on, boots up, powers off and tries to load the update again. I restart it, but this time quickly going into RomManager and starting it up in Recovery Mode. I go to restore the phone using the file I backed up from the TitaniumBackUp app, everything backs up except the system. I plug my phone into my laptop, and everything is in the folder. I performed a system/factory reset, downloaded the last Gingerbread update, but nothing helps. Anything I try to load it says "Installation aborted". No matter if it's the original update or a ROM I download. Looking up other forums, I notice others that have downloaded the Darkside ROM have had the same; if not similar issues. I apologize for the length of this message, but I wanted to put in as much detail as I could so you know exactly what the issue is. I look forward to hearing from someone, and thank you in advance!!!
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
nickdeal said:
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
Click to expand...
Click to collapse
Thanks a ton! How would I go about doing that?
You need to download motorola RSD app to you computer. Search XDA for stock firmwares and download one. You will then need to use the button combo to get in to RSD. Connect the phone to your computer and make sure it recognizes. I had an issue where one of my laptops would not recognize the phone for anything. I had to use a different laptop. Once it's done you should be back to stock. The bootloader should be unlocked still. Just root and flash your ROM of choice.
Sent from my MB860 using XDA App