Related
ok i updated my Atrix a few weeks ago via OTA
1. Can i root now that my Atrix is updated? if so, what's the process(sorri if i missed it in the threads, i been looking for the past 20 minutes)
2. I seen a vid of an atrix with gingerblur(one of the reason i wanna root) and it had the widgets from the LG Optimus that looked hella sick, are those widgets in the market or are they included in gingerblur?
SN: I used aRoot to root my atrix before the OTA update
Front the Rooting guides. I believe you have to flash back to 1.2.6 (or whatever the version before the OTA is) and then root. After that follow the root guide (before/after) OTA method. There is at least one tutorial on this already.
ok for the sbf, do i use 1.5.2 or 1.2.6?
i'm with AT&T
G1-8701 said:
ok for the sbf, do i use 1.5.2 or 1.2.6?
i'm with AT&T
Click to expand...
Click to collapse
Flash 1.26, see instructions here: http://forum.xda-developers.com/showthread.php?t=991072
Retain Root Process (GaldRoot), instructions here: http://forum.xda-developers.com/showthread.php?t=1016060
Update & install OTA update 1.57
Get you root back w/ GladRoot (refer to previous thread)
Install CWM, this is what most of the roms/themes are using to install now, plus you can create system backup points for easy restore if something goes wrong, see instructions here: http://forum.xda-developers.com/showthread.php?t=1019143
Swiftks said:
Flash 1.26, see instructions here: http://forum.xda-developers.com/showthread.php?t=991072
Retain Root Process (GaldRoot), instructions here: http://forum.xda-developers.com/showthread.php?t=1016060
Update & install OTA update 1.57
Get you root back w/ GladRoot (refer to previous thread)
Install CWM, this is what most of the roms/themes are using to install now, plus you can create system backup points for easy restore if something goes wrong, see instructions here: http://forum.xda-developers.com/showthread.php?t=1019143
Click to expand...
Click to collapse
so installing the OTA while rooted won't get rid of the root?
sorry about that, i didn't carefully read
Huge Thanx! ok i'm now rooted, but i ran into a problem, do i need cwm to install gingerblur? cause i can't seem to install cwm, plus i heard it's been causing a few probs anyways
Hey everyone, I am new to the rooting world however I have only experienced good things. I decided to root my thunderbolt using TB Autoroot+htc sync last night(had the original stock froyo, was going to installed cyanogen mod 7) and was successful. Unfortunately, I then installed the leaked 2.3.4 RUU GB which rerooted my TB before I installed the cm7(wanted to try the RUU out, bad idea lol). I was wondering if all or any of these are possible (dont care about losing data, just don't want to brick, ie avoiding command lines if possible):
1. root the phone while maintaining the leaked 2.3.4 RUU, just as was done for FROYO? Original reason for rooting was to remove the bloatware apps, but not having custom roms would be ok at this point if that is this is the only option. I know there is the revolution method to root, however will that work on the leaked 2.3.4 RUU?
2. root the tb with my current 2.3.4 RUU and install the BAMF 2.3.4/sense 3.0 GB build, or some other custom 2.3.4 rom?
A tutorial or walk through would be great! I know there are some out there, however I am looking for one specifically for those that have the leaked 2.3.4 RUU on the thunderbolt.
Also, can someone explain the difference in features of the GB builds that have been out for some time(customs) vs the RUU by verizon? I'm not talking about the physical aspects or the apps that come with, but more in terms of installing/switching between them. I know I need to root in order to install the custom roms, but assuming i can root the 2.3.4 RUU, will I be able to install any other 2.3.4 rom such as BAMF or cyanogen without problems? I have heard that you just arent allowed to go backwards, ie back to Froyo one you update to GB, but I should be able to install any 2.3.4 GB ROM once rooted via the bootloader(power+volume down) True?
Any help would be great! Thanks!
Yes you can. Just use revolutionary to root the new GB build. Here is a video tutorial for you.
Well, here comes your first less than pleasant reply...
Pretty much everything you wanted to know is posted in my thread stickied in the Q&A section. That's also where this post is going to end up. Please check my thread on basic noob questions, search before posting, and post in the correct forum.
Ota update after root
I just got this thunderbolt replacement in the mail. I noticed OTA was trying to update so I hurried and pulled the battery to intterupt the update since it was in the version I needed to be to ROOT. Ok I went ahead and ROOTED the phone then updated my RADIO (wich by the way is a big difference without it, it wont stay in 4g) ok so I think im good to go when I see the phone is trying to do a FIRMWARE update again, I dont know if this will ruin my root or phone so Im in airplane mode till I find out what to do. I dont know how to turn off automatic update and I dont want to mess up my root or phone. WHAT DO I DO PLEASE HELP!!!
Jeovanny said:
I just got this thunderbolt replacement in the mail. I noticed OTA was trying to update so I hurried and pulled the battery to intterupt the update since it was in the version I needed to be to ROOT. Ok I went ahead and ROOTED the phone then updated my RADIO (wich by the way is a big difference without it, it wont stay in 4g) ok so I think im good to go when I see the phone is trying to do a FIRMWARE update again, I dont know if this will ruin my root or phone so Im in airplane mode till I find out what to do. I dont know how to turn off automatic update and I dont want to mess up my root or phone. WHAT DO I DO PLEASE HELP!!!
Click to expand...
Click to collapse
If you are rooted, just use a program like root explorer to search for a file called otacerts.zip and rename it to otacerts.bak
When you open root explorer, make sure to put it into write mode. look at the top left side of the program and press on the mount r/w option
Cant find rom
I want to flash rom but I cant find it in my sd card through rom manager and also through recovery any suggestions its in the root of the phone highest directory
Jeovanny said:
I want to flash rom but I cant find it in my sd card through rom manager and also through recovery any suggestions its in the root of the phone highest directory
Click to expand...
Click to collapse
If you used your phone to download a rom, its in the "download" folder, move it to the root of sd card
Sent from my ADR6400L using XDA App
Root Error
I am trying to Root my Thunderbolt but keep getting the following error:
Failed to get Root!
I am using revolutionary.
I have installed, made sure their was a connection, and then removed HTC Sync.
I downloaded and installed Android USB Drivers.
I selected USB Debugging
Thunderbolt Info:
HBOOT 1.04.000
Android 2.3.4
ROM Ver 2.11.605.9
What am I missing and where can I get it? Can anyone help me out with this? Thanks in advance...
I've never rooted but I believe you need to downgrade. Revolutionary does not work with the latest OTA. There are several posts around that explain how to downgrade to the previous OTA (link below). Then you should be able to use the revolutionary method.
http://forum.xda-developers.com/showthread.php?t=1401959
Sent from my Thunderbolt using Tapatalk
Yes you need to downgrade to 2.11.605.5 then use reveloutionary
Ok, I know there are a lot of posts already on updating to 2.3.6 and root, but there appears to be a lot of different situations and limited information that is causing me some confusion.
So, what I want to do is get some clear details about probably the second most common situation: A Motorola Atrix 4G running the stock ROM with root access and an unlocked bootloader.
With regards to updating, aside from the obvious actions (i.e. TiBu, maybe a Nandroid), is there anything else that needs to be done to perform the update?
Additionally, I would like to keep root/unlocked even with the update, but I am willing to re-do root after the update. I can't find clear information on what methods work to keep root or to restore root after updating.
That is pretty much all that I am trying to do. I can not afford to brick my phone, so I want to make sure that I understand everything before I update.
P.S. Curse Motorola and it's stupid locked bootloaders!
I'm in the same shoes and looking to do the same thing...I want to keep root, not brick my phone...Apply the 141 update. I don't mind a little work (re-root, re-modify some files)
I'm running an unlocked bootloader, AT&T Atrix with 4.5.91 which is rooted with some custom changes (tethering, 2g/3g toggle, unlock APNs, agps)
Seems it could be possible to rebuild Blur_Version_91.4.5.141.MB860ATT.en.US available from Motorola and exclude the bootloader portions to keep the phone from bricking?
psychephylax said:
I'm in the same shoes and looking to do the same thing...I want to keep root, not brick my phone...Apply the 141 update. I don't mind a little work (re-root, re-modify some files)
I'm running an unlocked bootloader, AT&T Atrix with 4.5.91 which is rooted with some custom changes (tethering, 2g/3g toggle, unlock APNs, agps)
Click to expand...
Click to collapse
Yeah, I used the script that applied the tethering/hotspot tweak. That's about it. I haven't had to use any agps or anything, it's got amazing gps as it is.
Glad I'm not the only one though
If you have a stock rom unlocked bootloader with root don't do the ota update.I just soft bricked my phone.
Sadly, I did just that. I just wasn't paying attention.
Update: resorted to a factory reset. Now I have 2.3.6 running. Just going to take some time to restore my apps and settings.
Looks like I'm in the same boat. What's the best way to recover from a soft-brick in this situation?
thatguy193 said:
If you have a stock rom unlocked bootloader with root don't do the ota update.I just soft bricked my phone.
Click to expand...
Click to collapse
Yeah, this is exactly why I have asked. I read at least one post somewhere where someone tried both the SD Card and the OTA update and the SD didn't work, but the 2nd OTA try did. I don't know if they said they had unlocked or not.
Johnston212 said:
Yeah, this is exactly why I have asked. I read at least one post somewhere where someone tried both the SD Card and the OTA update and the SD didn't work, but the 2nd OTA try did. I don't know if they said they had unlocked or not.
Click to expand...
Click to collapse
Well I found this threadhttp://forum.xda-developers.com/showthread.php?t=1498856 was trying the auto updater as suggested but my phone wont stay on long enough for it to work.It does the auto shutdown and tries re-installing the OTA update which gives me the android triangle guy.
I recently made an update of my Atrix 4G's System from 2.3.4 to 2.3.6.
My 2.3.4 version was unlocked and rooted. It is on ATT.
Initially I received a notification in my phone about the new System update available. I tried three times OTA, but each time the process failed. When it was booting up always gave me the Android Icon with an Exclamation mark inside of a triangle. But nothing else happens. My phone continued working but with the 2.3.4 version.
Then I went to this page:
Because I haven't less than 8 post in this site I can't post any URL.
But, go for the "Motorola software update" in the Motorola's web page or Google it and get it.
And installed the "Motorola Software update" application. I had to restart my PC in order to make the software to recognize and connect to my Atrix 4G. When the Atrix was connected, by USB port, I had to select the "Windows media Sync" in the USB connection options list to make the connection to work.
Then, all that I had to do was wait until the process got completed.
I hadn't see nothing different with the new update.
I conserved my "unlocked" condition but I lost my "Rooted" condition. But that is not a big issue, there are several thread in the web that help you to get rooted again.
Hope this can help, It works for me.
cjfermin said:
I conserved my "unlocked" condition but I lost my "Rooted" condition. But that is not a big issue, there are several thread in the web that help you to get rooted again.
Hope this can help, It works for me.
Click to expand...
Click to collapse
You have an unlocked bootloader? Or sim-unlocked phone?
I'm in the same situation of @cjfermin and the 2.3.6 was flashed without any problem.
Of course I've lost ROOT, but I've followed simple instructions on the web (using Fasboot) and I've re-rooted the Atrix in 3 minutes.
PS: my Atrix was/is sim-unlocked and with unlocked bootloader.
emandt said:
I'm in the same situation of @cjfermin and the 2.3.6 was flashed without any problem.
Of course I've lost ROOT, but I've followed simple instructions on the web (using Fasboot) and I've re-rooted the Atrix in 3 minutes.
PS: my Atrix was/is sim-unlocked and with unlocked bootloader.
Click to expand...
Click to collapse
Thanks, that is exactly what I was needing to find out. I've heard yes and no's on different re-rooting methods. Could you link the one that you used? I was thinking about using Gingerbreak or OneClickRoot
I was trying to apply the OTA 4.5.141, on my rooted AT&T Motorola Atrix stock rom 2.3.4 and after the first reboot, following the instructions from the update, I am getting the message “failed to boot 2 starting rds mode” and just sit there. After removing the battery and booting up again, the phone seems to booting up normally and then when the phone finishes loading most of the widgets, I get a message saying “turning off” and the same cycle keeps repeating.
This is my primary phone and I am really desperate right now and I do not know what to do.
Please I need some help,
Johnston212 said:
Could you link the one that you used?
Click to expand...
Click to collapse
Here: http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
Hope that helps you!
Alverik said:
I was trying to apply the OTA 4.5.141, on my rooted AT&T Motorola Atrix stock rom 2.3.4 and after the first reboot, following the instructions from the update, I am getting the message “failed to boot 2 starting rds mode” and just sit there. After removing the battery and booting up again, the phone seems to booting up normally and then when the phone finishes loading most of the widgets, I get a message saying “turning off” and the same cycle keeps repeating.
This is my primary phone and I am really desperate right now and I do not know what to do.
Please I need some help,
Click to expand...
Click to collapse
Ok, is your bootloader unlocked as well? I googled the "failed to boot 2 starting RSD mode" that you mentioned and there are a number of posts on it from over the years. It seems that you may need to flash a SBF file, but I don't know enough about your situation to competently tell you more than that.
Johnston212 said:
Ok, is your bootloader unlocked as well? I googled the "failed to boot 2 starting RSD mode" that you mentioned and there are a number of posts on it from over the years. It seems that you may need to flash a SBF file, but I don't know enough about your situation to competently tell you more than that.
Click to expand...
Click to collapse
I am on stock rom 2.3.4 and have only rooted my phone nothing else. It seems that because it was a rooted phone the update could not finish the process.
Now I don’t know what to do.
Should I try to flash to 2.3.4 using RDS lite and then update using OTA 4.5.141 or flash using 4.5.141 (I don’t know where to find it)?
Help please, this is my only phone.
Alverik said:
I am on stock rom 2.3.4 and have only rooted my phone nothing else. It seems that because it was a rooted phone the update could not finish the process.
Now I don’t know what to do.
Should I try to flash to 2.3.4 using RDS lite and then update using OTA 4.5.141 or flash using 4.5.141 (I don’t know where to find it)?
Help please, this is my only phone.
Click to expand...
Click to collapse
If the only thing you've ever done to the phone is root then flashing the official 2.3.4 (not fruitcake) with RSDlite and then applying the 141 OTA update should be ok. Things to note:
1) Make sure the phone is fully charged
2) Apply the 141 OTA update from sd card. Go to motorola's website . I've had mixed results when applying previous updates when downloading over wifi.
3) Be VERY sure you've done nothing else to your phone other than root, i.e. unlock, mess with the bootloader and/or recovery (unlock, ROMs).
gnahc79 said:
If the only thing you've ever done to the phone is root then flashing the official 2.3.4 (not fruitcake) with RSDlite and then applying the 141 OTA update should be ok. Things to note:
1) Make sure the phone is fully charged
2) Apply the 141 OTA update from sd card. Go to motorola's website . I've had mixed results when applying previous updates when downloading over wifi.
3) Be VERY sure you've done nothing else to your phone other than root, i.e. unlock, mess with the bootloader and/or recovery (unlock, ROMs).
Click to expand...
Click to collapse
The only thing that I have done other than rooting my phone it’s unlocking the sim card.
I don't have a SIM unlocked phone, so I can't with 100% certainty say you will be ok. You should be fine though. Maybe others with SIM unlocked phones will chime in.
gnahc79 said:
I don't have a SIM unlocked phone, so I can't with 100% certainty say you will be ok. You should be fine though. Maybe others with SIM unlocked phones will chime in.
Click to expand...
Click to collapse
I am not able to copy the update file to the SD card because I get a message saying “turning off” a little bit after the phone loads the sd card and then I get the "failed to boot 2 starting RSD mode" and after that the only way to take it out of that mode, it’s by removing the battery.
What options do I have now?
Thank you,
is there an one click root 2.3.6 for the atrix? I tried the 2 programes but none of them seemed to work?
Same question here, thanks
http://briefmobile.com/motorola-atrix-4g-root
works for me with a locked bootloader.
There's also a voodoo root method that saves root before the update and restores root after the update.
gnahc79 said:
http://briefmobile.com/motorola-atrix-4g-root
works for me with a locked bootloader.
There's also a voodoo root method that saves root before the update and restores root after the update.
Click to expand...
Click to collapse
ok so now I screwed up and I am getting
svf 108 1:2
failted to boot 3
You got a failed to boot 3 using the fastboot preinstall method?? At which step did you get the error
Sent from my MB860 using XDA App
Ok, I'm on 2.3.4 and rooted using the instructions from brief mobile. I don't believe I have an unlocked bootloader. The only things I have done to the phone were original script from here for rooting (not one click), and then a modified version of it after the first Atrix update which had a before update and after update script to run.
Then, when upgrading to 2.3.4, I used the brief mobile/fastboot method to root it.
So, am I correct in thinking that to update the phone now I need to:
1. Download the update installer from Motorolla and update the phone to 2.3.6? (am I right that I the OTA update won't work or could cause a problem????)
2. Follow the instructions at Brief Mobile to root the phone.
Is this right, or should I wait a while before upgrading for things to be sorted out? The message popping up is irritating, but I can live with it if it avoids bricking my phone or having other problems.
Thanks
[Q] rooting help on 2.3.6
what is the proper way to root without unlocking the bootloader on 2.3.6 att?
http://briefmobile.com/motorola-atrix-4g-root
It still works
hdblab said:
http://briefmobile.com/motorola-atrix-4g-root
It still works
Click to expand...
Click to collapse
+1
Sent from my MB860 using XDA App
Root 2.3.6 one click
can someone upload a script or program that is one click root (not unlock) att atrix using 2.3.6?
http://forum.xda-developers.com/showthread.php?t=1505900
http://forum.xda-developers.com/showthread.php?t=1502735
http://forum.xda-developers.com/showthread.php?t=1500819
The preinstall method is real easy. If that is too challenging then maybe you should wait for someone to volunteer to provide a 1-click/batch script on their own rather than requesting(demanding) it.
sillyshyme said:
can someone upload a script or program that is one click root (not unlock) att atrix using 2.3.6?
Click to expand...
Click to collapse
I tried that before and I got soft booted.
Try again by using the instructions from the "Android-advice" website.
http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
Note: In those instructions specifically, it is important clarify that the phone should be in "fastboot" before entering in commands. Basically, do "step 6" before "step 4".
sillyshyme said:
I tried that before and I got soft booted.
Click to expand...
Click to collapse
do you need to undo the root on 2.3.4 before you upgrade to 2.3.6?
przemeknzb said:
do you need to undo the root on 2.3.4 before you upgrade to 2.3.6?
Click to expand...
Click to collapse
yes
btw, before you unroot 2.3.4. can you check if you have su, dosu and superuser.apk in /system/preinstall/ ? I'm not sure if I had those files when I was on 2.3.4, but I see them now on 2.3.6. I only removed the su related files as listed in the link when I was on 2.3.4, never removed su, dosu, etc from system/preinstall...guess it's not necessary for the 2.3.6 OTA to be successful on a locked bootloader.
I just rooted my Atrix after the OTA to 2.3.6 using this method. Worked perfect.
http://androidadvices.com/root-motorola-atrix-4g-45141-gingerbread-236-firmware/2/
no not had any of those files
tnedator said:
Ok, I'm on 2.3.4 and rooted using the instructions from brief mobile. I don't believe I have an unlocked bootloader. The only things I have done to the phone were original script from here for rooting (not one click), and then a modified version of it after the first Atrix update which had a before update and after update script to run.
Then, when upgrading to 2.3.4, I used the brief mobile/fastboot method to root it.
So, am I correct in thinking that to update the phone now I need to:
1. Download the update installer from Motorolla and update the phone to 2.3.6? (am I right that I the OTA update won't work or could cause a problem????)
2. Follow the instructions at Brief Mobile to root the phone.
Is this right, or should I wait a while before upgrading for things to be sorted out? The message popping up is irritating, but I can live with it if it avoids bricking my phone or having other problems.
Thanks
Click to expand...
Click to collapse
1) unroot 2.3.4 first:
http://androidforums.com/atrix-4g-all-things-root/423259-best-way-unroot.html
2) apply the 2.3.6 OTA update
3) redo the fastboot preinstall root method
btw before you unroot 2.3.4 can you check to see if you have su, dosu and superuser.apk in /system/preinstall? I see it now in 2.3.6 and am not sure if I had it there back when I was on 2.3.4
I didn't unroot before updating to 2.3.6 and now I can't get it to work. I keep getting the error "cp: write error: No space left on device", what should I do now?
Thanks.
sillyshyme said:
is there an one click root 2.3.6 for the atrix? I tried the 2 programes but none of them seemed to work?
Click to expand...
Click to collapse
what i did ...
UPDATE FROM STOCK 4.2.91 UNLOCKED BOOTLOADER AND ROOTED ATRIX 4G
try using OTA keeper from the market , before trying the OTA update , this is what i did
1 ) i unlocked my atrix 4g (2.3.4 all stock) with AUTOMATIC_UNLOCK_V4.2 and rooted with PetesMotorolaRootTools_v1.07 after that i installed CWM recovery
2 ) Make a Full backup of you rom using CWM and Titaniumbackup (never is enough)
3 ) MANY people say that using RSD LITE is not good , i just take the risk , because anyways the touch of my atrix is not doing good so i will be sending it to warranty soon anyways , i take the risk , i flash my atrix with RSD Lite 5.5 and this sbf
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
i don´t know any other people but i did not loose any data or apps from my atrix it was everything there , unlocked sign erased , CWM recovery partition erased , ROOT was there it is like everything go back to stock ... almost everything my data part was untoched.
4 ) download from the market OTA Root Keeper make a backup of your root and then press unroot temp
5 ) with that done I started to download and install the OTA update
6 ) after this point the phonewill reboot to stock recovery mode and start to upgrade it took almost 10 min to do the update after finishing copying files, it restarted 2 times on the moto logo then started booting , it take a longtime to pass the att boot image be patience mine took almost 5 min after that the phonestarted with everything loaded my apps , photos videos etc.
I think this could be a workaround (it work for me) for updating to .141 , also the baseband was updated to N_01.77.37P_usa_att
The only thing that was untoched was the webtop part , it stays on WT 1.2, ireally don´t use it , but i think if im already on 2.3.6 i can RDS the full SBF to get Webtop upgraded also the kernel say 2.6.32.9 is that the correct kernel for 2.3.6 i read that kernel is for a Froyo sbf not pretty sure
The thing now is , i wanna try installing CWM recovery and see if im already "unlocked" and try fruitcakes to downgrade 2.3.4 but i am not pretty sure about this i think i will get a brick
Also , you can try investigate to downgrade of wait for a generous dev to take out of the oven the fruitcake for 2.3.6 and try the method above
I TAKE no responsibility with this mini-tuto for anything that could happen to your atrix it on you own do this , i take the risk and it works !!!
thanks everyone
Ok. so ive been trying to root with the new release but cant for some reason.
I figure its due to the fact that i unsucessfully tried to root with another method
is there a way to cleanly install 4.04 again?
factory wipe doesnt work, superuser is still in my app drawer
which version of ics do you have?
Blur_Version.651.167.3370.XT910.Brasil.en.BR.zip
so, the LATAM version
You can reinstall the OTA (Boot recovery > clean cache > wipe data/factory reset > install update from sd card).
or use this guide for fresh install http://forum.xda-developers.com/showthread.php?t=1700264.
btw have you tried this process for root? http://forum.xda-developers.com/showthread.php?t=1707431
worked for me (european leak)
thanks for the help. have a few options now to try. ill post my success or failure.
ps... ellas ole
Try the root method first
I don't know if the script works, i used the manual process with commands.
If you have any questions about running adb, feel free to ask
supercharge1 said:
ps... ellas ole
Click to expand...
Click to collapse
Ok I did it. rooted it finally
I was right, i needed to do the fresh install to clear the previous root attempt and everything went BEAUTIFULLY
Thanks again buddy
I'm glad you made it. We really needeed that root exploit!
No one's answered this yet....
If I flash these current "leaks" like .210 for instance, to a 100% stock razr, 1.) do I have to root it first? and 2.) will the "OFFICIAL" release still be pushable and pullable for me without having to do anything special? Or will there be other things I have to do for having rooted the phone? (just asking)
At this point you can root any version of ICS using the latest exploit, but if you have a stock razr it's much easier to root 2.3.6 using Motofail and keep your root using voodoo ota rootkeeper.
If you flash a leak you will still be able to get the official OTA but not directly from your phone as an update, you will have to flash it as well.
Gr0uNdZ3r0 said:
At this point you can root any version of ICS using the latest exploit, but if you have a stock razr it's much easier to root 2.3.6 using Motofail and keep your root using voodoo ota rootkeeper.
If you flash a leak you will still be able to get the official OTA but not directly from your phone as an update, you will have to flash it as well.
Click to expand...
Click to collapse
Thanks. I'll just wait
maybe......
Just so I'm clear... and I rarely am about Motorola rooting... we'll likely be able to use this to root our phones when ICS finally drops?
I don't think Motorola will have the time to patch this, considering that the OTA is about to be released soon, but even in that case, there will be another option for sure, many developers wait for the official release to post their work