Hello all,
I'm trying to get openvpn working but Iḿ stuck at tun.ko.
I've been trying various modules but all return -1 Unknown symbol in module
uname -r
2.6.32.9
System information: Version.4.2.13.MB860.Retail.en.FR
Android version: 2.2.2
Baseband version:N_01.92.00R
Kernel version: 2.6.32.9 [email protected] #1 SMP PREEMPT Sat May 14 14:00:36:20 CST 2011
Build number: OLYEM_U4.1.3
I just posted as much info as possible, further than the kernel version I don't see why there would be a difference, but apparently there is... although all modules info (modinfo) showed me 2.6.36.9 none worked...
If somebody could direct me to the kernel source, and explain lightly which versions are important I could compile it by myself and I'll post it here.
Or ofcourse better a link to the module is better
Thanks!!
Try one of the custom kernels, they have tun.ko module built in!
Also, I have the same problem when I decompress the module directly in the phone with File Expert, I use Astro to decompress and works!
Enviado desde mi MB860 usando Tapatalk
lhurtado said:
Try one of the custom kernels, they have tun.ko module built in!
Also, I have the same problem when I decompress the module directly in the phone with File Expert, I use Astro to decompress and works!
Enviado desde mi MB860 usando Tapatalk
Click to expand...
Click to collapse
I'm glad I saw this. I've been holding off on trying some of the custom roms until they get a little more stable. Meanwhile in the back of my mind I was concerned about losing my ipsec capability.
Related
I'm sorry if this is yet another thread for kernel recompilation and tun.ko.
I would like to be able to use openvpn with the P500... but I can't find the source for the kernel used in the LG P500.
Can I use generic sources for 2.6.32.9 or is a lg-patched kernel required?
xdadevc
Did it myself...
Well... I helped out myself
Here's a tun.ko module for the LG P500! Openvpn works now.
Since source is not available from LG (yet) the module is compiled from the original 2.6.32.9 sources used in the P500 and it works in my P500 (tested with tun openvpn).
xdadevc
Hello,
thanks I've searched it for many hours. I must look if it works, but i can load it per insmod that is a right way.
Also now I must configurate my own openVPN network.
Thanks a lot.
Greeting schreibnix
Great news! Thanks =)
Thanks a lot...looking forward to test it
Once kernel source drops if you guys notify me I'll Oc it like I did the optimus S and lg ally.
Yes, OC kernel
We need some power for our OO
Hi i want to test my OpenVPN server but i need tap kernel driver, have you compile it?
Many thanks
xdadevc said:
Here's a tun.ko module for the LG P500! Openvpn works now.
Click to expand...
Click to collapse
Thank you very much my friend! I downloaded it and works like a charm! I have some minor dns problems, but I'm sure I'll find the solution.
dimiz said:
Hi i want to test my OpenVPN server but i need tap kernel driver, have you compile it?
Many thanks
Click to expand...
Click to collapse
AFAIk there is no tap kernel driver for openvpn,
we can only use tun
the tun.ko on cm7's rom is not compatible with the kernel.
so i searched for a compatible tun.ko for the kernel
anyone who have some problems on configuration (config file of openvpn )
you can contact me,
FYI we use openvpn here in our country to have free internet, ( using backdoor connection )breaking onto the network's firewall
cmangalos said:
AFAIk there is no tap kernel driver for openvpn,
we can only use tun
the tun.ko on cm7's rom is not compatible with the kernel.
so i searched for a compatible tun.ko for the kernel
anyone who have some problems on configuration (config file of openvpn )
you can contact me,
FYI we use openvpn here in our country to have free internet, ( using backdoor connection )breaking onto the network's firewall
Click to expand...
Click to collapse
Hi bro,
I cannot make it to work with my phone. I'm running Mik_os CM7 on my LG P500. Please help. Thanks!
tun.ko
Hi, I need to tun.ko for P500 Android 2.3.3 core 2.6.35.10-perf. Can you help me?
multibestia said:
Hi, I need to tun.ko for P500 Android 2.3.3 core 2.6.35.10-perf. Can you help me?
Click to expand...
Click to collapse
You mean the stock **** kernel? No, cannot help. Download the sources and compile it.
Or just flash a saner kernel from Paolo or franco.
tun.ko for LGP 500 with Android 2.3.3
After searching all the forums and all the possible forums , I couldn't find anywhere the Tun.ko module of LGP 500 with Gingerbread.
I decided to re-compile the kernel module to build tun.ko and got it working successfully
I am able to connect to VPN
Attaching if anyone want to use it
Tested on Bell LG E720B optimus Chic
xdadevc said:
Well... I helped out myself
Here's a tun.ko module for the LG P500! Openvpn works now.
Since source is not available from LG (yet) the module is compiled from the original 2.6.32.9 sources used in the P500 and it works in my P500 (tested with tun openvpn).
xdadevc
Click to expand...
Click to collapse
This particular one works on my Bell LG E720B Optimus Chic if anyone is interested.
xdadevc said:
Well... I helped out myself
Here's a tun.ko module for the LG P500! Openvpn works now.
Since source is not available from LG (yet) the module is compiled from the original 2.6.32.9 sources used in the P500 and it works in my P500 (tested with tun openvpn).
xdadevc
Click to expand...
Click to collapse
Hi,
could you shows the steps how you compile it..
Was trying to get tun.ko for 2.6.35.10-perf+ (V20G)
kdpandian said:
After searching all the forums and all the possible forums , I couldn't find anywhere the Tun.ko module of LGP 500 with Gingerbread.
I decided to re-compile the kernel module to build tun.ko and got it working successfully
I am able to connect to VPN
Attaching if anyone want to use it
Click to expand...
Click to collapse
it worked for me bro... thanx a million...
sagardrokr said:
it worked for me bro... thanx a million...
Click to expand...
Click to collapse
Hi...
This sounds very promising. I can't see the attachment for tun.ko for LGP 500 with Gingerbread. Can you please attach it.
Many Thanks,
--
Indrajeet
I installed the scramble rom on the x10 dev thread and it really is pretty nice except the wifi fails every time.
There is no "dev tools" to choose "crash system server" and no blade wifi fix in the installed apps....
Other than this..it looks like a great rom....and from what I've read, wifi is supposed to be working...is it?
#restore factory settings
Omega,
I'm very sorry...but what does " #restore factory settings" mean exactly?
ohk basic question
1) are you using stock kernel or modified kernel
coz i am also on scamble but except battery drain no issues at all..
I believe it's a stock kernel...it says:
Kernel version:
2.6.29
[email protected] #1
Fri Dec 17 2010
rpavich said:
I believe it's a stock kernel...it says:
Kernel version:
2.6.29
[email protected] #1
Fri Dec 17 2010
Click to expand...
Click to collapse
Ohk then its stock kernel.
in that case wifi should not be a problem.
ohk can you write down all the steps that you did to get your scamble un and running including any update zip you installed over the scamble main zip.
anantshri said:
ohk can you write down all the steps that you did to get your scamble un and running including any update zip you installed over the scamble main zip.
Click to expand...
Click to collapse
I did only what the directions said in the first post.
But I have to say...since yesterday, I found another rom that's working for me (MIUI from cobrato) so I'm fine for now.
I have looked for a tunnel kernel module for the samsung i5500 with the FROYO version 2.6.32.9-perf
I couldnt find it anywhere, so I have compiled my own. Here it is, sorry if it's been done before..
I have tested this on my european stock 2.2 JP3 kernel updated with kies and on a stock GT-S5570. It may work on other phones with the same kernel version..
as per usual place in /system/lib/modules
then the vpn services should work..
Can you explain what does it?
I don't know what are vpn services...
Inviato dal mio Galaxy5 usando Tapatalk
the tun.ko is necessary for the vpnc application and for the openVPN application.
there are few tutorials out there about openVPN integration with android, the main things that you need are this module, a rooted phone and the android sdk installed so that you can send files with the phone using 'adb'.
If you are not interested in these apps then you dont need the kernel module.
Yeah, i've understand, thanks.
Inviato dal mio Galaxy5 usando Tapatalk
can i use this tun.ko in my galaxy 5 for openvpn ?
Just in case anyone needs to know, my CyanogenMod port's kernel already has TUN built-in, so this module won't work (and isn't needed, either).
Absolutely, this is for the Stock 2.2 froyo ROM.
thanks!!! i just got one question.. i tried to build it with no success at all using android-ndk-r5b and android-sdk-linux_x86 with the right kernel version sources. how did you build it? thanks again, this module worked for me nicely
i tried to install ubuntu on my sgs2 via linux installer but as soon i open it it says:
Sorry, but your kernal does not have the necessary features for install linux.
please check kernal:
kernal feature is not known because the /proc/config.gz
file is not found.
i rooted my sgs2 on its stock rom update i.e. 2.3.6 i9100GDDKI1
kernal version 2.6.35.7
build no. GINGERBREAD.XWKJ2
please help me. and if it is not possible to install ubuntu via this software please suggest me another method.
jash2711 said:
please check kernal:
kernal feature is not known because the /proc/config.gz
file is not found.
Click to expand...
Click to collapse
I would suggest you don't play with your phone if you don't know what you're doing...
When you compile a kernel in linux, you have the option to enable/disable the creation of config.gz inside the kernel or outside it. If that option is disabled, you won't be able to get the .config the kernel was built with.
The option required is IKCONFIG or Kernel .config support
This option enables the complete Linux kernel ".config" file contents to be saved in the kernel. It provides documentation of which kernel options are used in a running kernel or in an on-disk kernel. This information can be extracted from the kernel image file with the script scripts/extract-ikconfig and used as input to rebuild the current kernel or to build another kernel. It can also be extracted from a running kernel by reading /proc/config.gz if enabled (below).
Click to expand...
Click to collapse
So if you want to have /proc/config.gz support you either need to recompile the kernel with CONFIG_IKCONFIG enabled or find a kernel that has it enabled by default.
AzureusPT said:
I would suggest you don't play with your phone if you don't know what you're doing...
When you compile a kernel in linux, you have the option to enable/disable the creation of config.gz inside the kernel or outside it. If that option is disabled, you won't be able to get the .config the kernel was built with.
The option required is IKCONFIG or Kernel .config support
So if you want to have /proc/config.gz support you either need to recompile the kernel with CONFIG_IKCONFIG enabled or find a kernel that has it enabled by default.
Click to expand...
Click to collapse
does that mean i have to flash my sgs2? bcoz i didnt flash it earlier. just rooted it with doomlord rooting toolkit. so didnt ask me any of these option. if there is any other way like just unrooting it and thn rooting it back with the above mentioned option please tell me how to do that.
sorry if am asking too many or silly questions but apparently there is not too much of support for my android device.
can anyone please suggest a soln fast?
jash2711 said:
if it is not possible to install ubuntu via this software please suggest me another method.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1223128
Would someone give me the link to the WiFi module of ChampKernel 2.6.29 the one with the sony boot image for stock based ROM
Check champs signature, link to kCernels is given, along with WiFi modules.
I use dk version with Sony image, the thgo version was battery drainer..
Sent from my X10S using XDA
jrchan01 said:
Would someone give me the link to the WiFi module of ChampKernel 2.6.29 the one with the sony boot image for stock based ROM
Click to expand...
Click to collapse
Depending on which version of the Kernel you are using, you should find all WIFI modules HERE
Thanks