ok so i am now s-off as well as fully temp rooted. i try through adb
adb shell insmod /data/local/tmp/8x60_oc.ko scpll_l_val=32 vdd_uv=1320000
now i return operation not permitted.... how do apply my values one and for all? setcpu shows my max at the stock 118
Ditto. i wanna OC back to 1.5 but no go.
We have to wait for a custom kernel. The stock kernel doesn't allow overclocking
VoXPCS said:
We have to wait for a custom kernel. The stock kernel doesn't allow overclocking
Click to expand...
Click to collapse
dude your so under informed its scary. yes it does. i figured out how to push the settings. you gotta do it under phone shell. but the thing is it doesnt stick upon reboot. so to me ill wait for the custom kernel. it was nice when we tmp rooted. cause i never rebooted. but now i can and do. lol
nevermind. Must not have read the post right haha
Related
Based off of htc-kernel-espresso repository from CyanogenMod github and a modified version of toastcfh's overclock patch.
espresso source based is for
espresso devices only
legend source based is for
espresso, legend, or aria devices
No support will be given, use at your own risk, DON'T FLASH unless you know what you are doing .
Version 3.5:
updated source to include interactive governor
added darchstar's patch to fix idle status being set NULL
added a 787 for those that can't do 806
incorporated changes into legend code base
http://www.mediafire.com/?9ziqlmh6vy26x
V4.0: (Requires setting scaling_max_freq in order to boot)
all frequencies included in one kernel.
added 480 back.
864 max
available frequencies: 245760, 400000, 480000, 600000, 768000, 787200, 806400, 825600, 844800, 864000
NOTE:
Since all frequencies are now playing nicely together, I am only going to be releasing one kernel version per source base.
It is up to you to set your maximum speed in your init.d files or you might not boot (since the maximum is 864).
For Those of you who have used my G1 kernels, this will not be an issue since you should know how to do it. For the others, good luck .
Essentially, you need to put something like...
Code:
echo 600000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
somewhere in your init.d files. Personally I like to use 00banner since it's first to execute on cyanogenmod.
Don't forget that if you swap out an init.d file you need to make the new one executable. For example...
Code:
chmod 0750 /system/etc/init.d/00banner
http://www.mediafire.com/?7jyeovzuo8lx9
archive:
http://www.mediafire.com/?v6cdcjyf04ebd
These are koush's anykernel.zip's that change your boot and system images. To return to your original state just do a nandroid advanced restore of the boot and system partitions (of course you have to of backed them up first).
github (master branch is legend base, oc-espresso-2.6.29 branch is espresso base. Default is set to espresso)
sweet, he's doing an overclock kernel?? thats awesome!
posted a v2 to fix a problem with minimum frequency.
This version is set to 691/691 when screen is on and 245/245 when screen is off.
edit: this broke it.
dumfuq said:
posted a v2 to fix a problem with minimum frequency.
This version is set to 691/691 when screen is on and 245/245 when screen is off.
edit: this broke it.
Click to expand...
Click to collapse
Lol I was gonna post to not try and set it to a performance profile as it breaks the overclock.
Great work though I'm finally so glad to see this. I flashed it and boot was quite a bit faster as well. A 91mhz gain seemed to make quite a difference. If this arm cpu will hit 800 then this phones gonna fly.
Ok noticing some lag here and there. I just did a quadrant bench and only scored 333. I have not did a reboot since I flashed it. Will try and report back.
Sent from my T-Mobile myTouch 3G Slide using XDA App
v3. fixed for the night.
screen on 480/691
screen off 245/480
sultan.of.swing said:
Lol I was gonna post to not try and set it to a performance profile as it breaks the overclock.
Great work though I'm finally so glad to see this. I flashed it and boot was quite a bit faster as well. A 91mhz gain seemed to make quite a difference. If this arm cpu will hit 800 then this phones gonna fly.
Ok noticing some lag here and there. I just did a quadrant bench and only scored 333. I have not did a reboot since I flashed it. Will try and report back.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
was the lag on v1? if so the minimum frequency was dropping to 19mhz, that's why i had to do the next one.
never tried quadrant before...i kinda like
on test 1, i exerienced a TON of lag... i set min / max at 691 and got lag like a mofo >.> hopefully t3 doesnt lag so bad this time
quick question... if i do this kernel, and i dont like it, can i go back to the old one just by flashing the old one or would that break something??
you could easily make a backup boot image zip
thomas.nelson4 said:
quick question... if i do this kernel, and i dont like it, can i go back to the old one just by flashing the old one or would that break something??
Click to expand...
Click to collapse
This kernel is just for testing purposes. You don't want it for daily use. If you are not comfortable flashing random broken things, don't even bother with it. Currently it takes a big performance hit for 3d graphics and has no wifi.
dumfuq said:
This is a test, this is ONLY a TEST.
Based off of htc-kernel-espresso repository from CyanogenMod github
Wifi is broken.
Performance is LOCKED at 691 mhz.
This is an update.zip that replaces your boot.img. To return to the stock boot.img just do a nandroid advanced restore of the boot partition (of course you have to of backed it up first).
No support will be given, use at your own risk, DON'T FLASH unless you know what you are doing .
oc691-kernel-test-v1-signed.zip
oc691-kernel-test-v3-signed.zip
Click to expand...
Click to collapse
hey do you have the patch for this?
wesgarner said:
hey do you have the patch for this?
Click to expand...
Click to collapse
here is the diff
slide_oc.diff
fyi I ended up hardcoding the 691 instead of using the old technique because the divisor was giving me issues with anything over 652 and I was just trying to do a proof of concept anyway.
Any reason it might go to black on boot-up...for minutes? Confict with new radio maybe?
My slide's looking very brickalicious at the moment so I'm gonna volume down and power into recovery; Just not booting. Was running Slidemeroot5r1.
Dumfuq, I love you.
Oakley44 said:
Any reason it might go to black on boot-up...for minutes? Confict with new radio maybe?
My slide's looking very brickalicious at the moment so I'm gonna volume down and power into recovery; Just not booting. Was running Slidemeroot5r1.
Click to expand...
Click to collapse
guess what, ive got a GREAT answer for ya... that boot image is ONLY FOR froyo roms at this point. sorry bud :/
Oakley44 said:
Any reason it might go to black on boot-up...for minutes? Confict with new radio maybe?
My slide's looking very brickalicious at the moment so I'm gonna volume down and power into recovery; Just not booting. Was running Slidemeroot5r1.
Click to expand...
Click to collapse
Is SlideMeRoot5r1 a CyanogenMod-6.0.0? I think not.
dumfuq said:
Is SlideMeRoot5r1 a CyanogenMod-6.0.0? I think not.
Click to expand...
Click to collapse
Ahh, what douchey lord of noobs I am.
Ok well, needless to say I did a full restore and rebooted. Still goes to black. Any change you have a zip for the stock kernel?
breaks WIFI on SuperFly 1.2 ... me only???
dumb... i can't read
UM BUT maybe pushing some wlan.ko file....?
Oakley44 said:
Ahh, what douchey lord of noobs I am.
Ok well, needless to say I did a full restore and rebooted. Still goes to black. Any change you have a zip for the stock kernel?
Click to expand...
Click to collapse
just flash Slidemeroot5r1 rom without wipe and reboot
Sxyman815 said:
just flash Slidemeroot5r1 rom without wipe and reboot
Click to expand...
Click to collapse
Already wiped system/cache to go back to last restore. In the middle of restore as I type this... . Next time I'll read the thread title a bit better..........ok, yeah it worked .
Hey guys. Just worked with joeykrim to get root on the fascinate, he has updated his guide here: http://forum.sdx-developers.com/epic-development/adb-root-exploit-test/
Works great for me, let me know what yall think and donate to him / thank him!
Nice. I won't get my phone for a couple of weeks. Hoping there is a one click method out by then.
I did mine just using the rage.bin and I restarted and checked it twice and mine is persistent without doing all those steps.
Dirrk said:
I did mine just using the rage.bin and I restarted and checked it twice and mine is persistent without doing all those steps.
Click to expand...
Click to collapse
that shouldnt be right, you didnt copy the playlogo or anything? rage is a temporary root exploit that allows us to modify /system
Correct. I have 2 at home that are still in the box. After I get out of class tonight I will try it on those to verify.
fallingup said:
that shouldnt be right, you didnt copy the playlogo or anything? rage is a temporary root exploit that allows us to modify /system
Click to expand...
Click to collapse
I've confirmed the rage.bin exploit combo'd with installing the buysbox/su binaries gives you perm root.
I've rebooted the device and the adb service a few times, and I just grab a shell, su, and I"m seeing #.
I assume this is why busybox is there in the first place, to provide a consistent exploitable binary?
this has probably been asked a whole lot but which perma-temp-root is the best.....my phone just died so i dont mind changing it up lol
well, they all do the same thing when it comes the the perm-temp root.
What do you want? Do you want overclock? do you want bloat removed? do you want both. Its all in the titles of the different methods.
Its not like different roms where there is a big difference.
pastorbob said:
well, they all do the same thing when it comes the the perm-temp root.
What do you want? Do you want overclock? do you want bloat removed? do you want both. Its all in the titles of the different methods.
Its not like different roms where there is a big difference.
Click to expand...
Click to collapse
whats best for battery i only get about 8-9 hours while others get 12-15
by the way my phone rebooted and i still have su permissions wen i run it through terminal but yet i dont have s-off
pimp100500 said:
by the way my phone rebooted and i still have su permissions wen i run it through terminal but yet i dont have s-off
Click to expand...
Click to collapse
S-Off hasn't been achieved yet.
WyldeStile said:
S-Off hasn't been achieved yet.
Click to expand...
Click to collapse
i know thats y i think its weird
pimp100500 said:
by the way my phone rebooted and i still have su permissions wen i run it through terminal but yet i dont have s-off
Click to expand...
Click to collapse
How did you have root after reboot.
Hi Guys,
Finally i can show you guys my knowledge where i'm realy strong in. C programming
I started this project to gain a good and stable kernel thats is support many roms. I'll hope some other devs want to join me in on this project to create together one good kernel instead of many splintered releases of the kernel. (At the end we only need 1 kernel right?)
Main project goals:
2.3.5 compatible (Sound problem etc)
MIUI and AOSP/CyanogenMod compatible
Tweaked to the bone
two way call record (2WCR)
You name it
What i already done:
OC to 1.5ghz
Fixed codec problem for 2.3.5 Roms
Added SmartassV2 governor
Snapdragon optimisations
If you want to help me in this project give em a pm and i hook you up to the proejct page
http://code.google.com/p/crypt0kernel/ commiting the init code takes longer then i expected...
Flash method for S-On users:
Follow this how-to:http://forum.xda-developers.com/show...59&postcount=2
And use this to copy the libs:
1. unpack downloaded ZIP file (for example to d:/temp)
2. connect device with computer with Android SDK tools (adb, fastboot)
3. reboot to bootloader
adb reboot bootloader
4. flash new kernel
fastboot flash zimage d:/temp/zImage
5. restart device
fastboot reboot
6. push new wifi module
adb push *.ko /data/local/
adb shell
su
mount -o rw,remount /dev/block/mmcblk0p22 /system
busybox cp /data/local/*.ko /system/lib/modules/
Click to expand...
Click to collapse
Ps. Zip files are CWM zip files so can be flashed by ClockwordMod
Great man, looking forward to have 3.5 sense working on our devices..with sound
keep up the good work
Regards
excellent! always good to have a new kernel do you think 1080p 2D video recording can be solved in kernel level?
Flashing it !
Good news!
If possible, also add support 2WCR (2-way call records)
will this work with s-on? and will it effect the dual core
and yet, this kernel on Root stock firmware can be put?
Gamburger said:
and yet, this kernel on Root stock firmware can be put?
Click to expand...
Click to collapse
I dont see the problem why not. Try it and make sure you do a backup before flashing.
crypt0night said:
I dont see the problem why not. Try it and make sure you do a backup before flashing.
Click to expand...
Click to collapse
hey man
would you pleased post this link:http://forum.xda-developers.com/showpost.php?p=18416359&postcount=2
to the first post incase S-on user like me need the alternative way to flash?
and this link for wifi issue
from: http://forum.xda-developers.com/showthread.php?t=1311812
How to install
1. unpack downloaded ZIP file (for example to d:/temp)
2. connect device with computer with Android SDK tools (adb, fastboot)
3. reboot to bootloader
adb reboot bootloader
4. flash new kernel
fastboot flash zimage d:/temp/zImage
5. restart device
fastboot reboot
6. push new wifi module
adb push *.ko /data/local/
adb shell
su
mount -o rw,remount /dev/block/mmcblk0p22 /system
busybox cp /data/local/*.ko /system/lib/modules/
Should we trust quadrant score on these? It seems setcpu doesn't want to play nice with leedroids ROM or these new kernals haha
Sent from my HTC EVO 3D X515m using XDA App
DJGurth said:
Should we trust quadrant score on these? It seems setcpu doesn't want to play nice with leedroids ROM or these new kernals haha
Sent from my HTC EVO 3D X515m using XDA App
Click to expand...
Click to collapse
dun use setcpu as only mod 1st core as they said before. i didnt try it. use cpumaster or system tuner to oc
can't flash it:
assert failed:write_raw_image("/tmp/newboot.img", "boot")
error in /sdcard/Cript0kernel.zip
(Status 7)
Installation aborted
im using cript0 rom 1.2
hboot 1.49.0011 s-on
steveruthless said:
can't flash it:
assert failed:write_raw_image("/tmp/newboot.img", "boot")
error in /sdcard/Cript0kernel.zip
(Status 7)
Installation aborted
im using cript0 rom 1.2
hboot 1.49.0011 s-on
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1049102
or try android control to flash zimage
i m in 149.0013 s-on
crypt0night said:
I dont see the problem why not. Try it and make sure you do a backup before flashing.
Click to expand...
Click to collapse
Just earlier tried to put the Kernel UNITY V1 beta - did not, an error .... (Status 7)
Installation aborted. Even wi-fi stopped working. Well that did backup)
Сame back.
Gamburger said:
Just earlier tried to put the Kernel UNITY V1 beta - did not, an error .... (Status 7)
Installation aborted. Even wi-fi stopped working. Well that did backup)
Сame back.
Click to expand...
Click to collapse
same problem here..unable to flash using cwm when still s-on..will try different method.
Installed through CWM no problem for me, just waiting for Villain ROM to boot.
Looking forward to Smartass govenor2
Thanks for this Crypt0night, it is great to now see some movement from great devs now we have the source code.
keep it up buddy your work is much appreciated.
Edit:
Seems to be working well, Wifi Ok, governor set, Oc'ed to 1536 with CPU Master
Is it possible to implement a zero shutter lag code?
Would be really nice! :-D
And may be two versions with and without two way recording because i read that it can drain the battery bad sometimes..
Sent from my HTC EVO 3D X515m using Tapatalk
ilovemeow said:
http://forum.xda-developers.com/showthread.php?t=1049102
or try android control to flash zimage
i m in 149.0013 s-on
Click to expand...
Click to collapse
successfully flash using this but system tuner still show the highest oc is 1118 mhz
steveruthless said:
same problem here..unable to flash using cwm when still s-on..will try different method.
Click to expand...
Click to collapse
the fact of the matter is there is a root and s-off. Only rom - stock.
osrix said:
Installed through CWM no problem for me, just waiting for Villain ROM to boot.
Looking forward to Smartass govenor2
Thanks for this Crypt0night, it is great to now see some movement from great devs now we have the source code.
keep it up buddy your work is much appreciated.
Edit:
Seems to be working well, Wifi Ok, governor set, Oc'ed to 1536 with CPU Master
Click to expand...
Click to collapse
Are you s-on or s-off mate ?
I don't think anyone that is s-off is having issues with any of the new kernel's. It's just us with s-on using the htc unlock method that we can't OC. Installing via recovery works with no errors, but still no option to OC as default values only avail..
Cheers
OK I'm an android noob I guess but an iPhone pro so I just wanna make sure in doing this right with the adb.
1. Root and overclock with the kernels then reboot
2. Go to market get superuser
3.Put back into download mode open adb type in commands then reboot
After reboot I should be rooted and overclocked and just need to get system tuner or setcpu and I'm good right? Clock it to 1.83 and leave on demand? If I'm correct then any quick yup will send me on my way tks to anyone who replies quickly I'm anxious lol
Oh yea I know I need the drivers and downloads and USB debugging on, I have them I'm just making sure that the phone needs to be in download mode and the adb will push it from there
That sounds about right. You could flash TPC's Rom and not have to push the overclock files though. Seems a bit smoother
also
knoshann said:
That sounds about right. You could flash TPC's Rom and not have to push the overclock files though. Seems a bit smoother
also
Click to expand...
Click to collapse
Wasn't sure if I could with cwm not working good as yet, can I flash with oden? better yet I'll look Tks for the reply!