CWD won't work: E:failed to verify whole-file signature - Galaxy S II Q&A, Help & Troubleshooting

I am not able to flash Villain ROM 2.3 or anything else. The reason is that when it reboots into recovery mode, it starts with: -
_ Installing package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
Any idea what's going on, I just recovered my SGS2 from almost being a brick!
Cheers!

It sounds like a corrupted file. Your download might not have completed or you are having hardware issues such as faulty ram.
Before updating a ROM, try to checking the MD5 checksum to see if they are correct if the chef provides it.

Go into your recovery and press the Choose zip to flash option, there you can select 'turn off signature verification, now you can happily flash.

Sorted!
Thanks God I got it sorted...thanks for the help of some guys in VillainROM thread.
Actually, what happened was that after flashing Chainfire's kernel, to get rid of the Yellow triangle, I was supposed to flash the Samsung stock kernel. That's what I did. BUT, after that you had to further extract the same CHAINFIRE's kernel, NOT the stock kernel to its zImage and had to put it on the root of the internal sd_card.
But, unfortunately, I being, careless extracted Samsung's stock kernel to its zImage and copied that to the sd_card. Now after flashing Samsung's stock kernel to remove the yellow triangle, it's important to flash the ChainFire's kernel's zImage so that it could again ROOT, install busy box and add CWM on the phone.
So, guys if you still having the same problem, remove the zImage you already have on your sd_card and replace it with the 1 from ChainFire's kernel and it will sort your problem and you will be able to see CWM again with FULL options.
Chillaxxxx!

hey i have copied the zimage to my sd card, but in android 3e recovery i cannot flash it .. i only see apply update zip option. but i cant select the zImage file please!!

In CWM, Flash kernel and select the zImage.zip, phone will reboot, done.
Sent from GT-I9100

The thing is how do I get cwm in the first place?? Total confusion

ashvincj said:
The thing is how do I get cwm in the first place?? Total confusion
Click to expand...
Click to collapse
If you are rooted then CWM is already installed in your device.

okkkkkk tankss

I rooted using insecure kernel but I dont see cwm app in my phone!!

ashvincj said:
I rooted using insecure kernel but I dont see cwm app in my phone!!
Click to expand...
Click to collapse
Can't say about an unsecured kernel but with CF root it is there.
Sent from GT-I9100

I used S2 Root, and insecure kernal.. doesnt not include CWM, so install RomManager, isntalled CWM but when reboot in boots to android recovery, and i get the verificaiton error, so it wont even load cmw so I cant chose the optin to disable the verification check!!

e: failed to verify whole-file signature
DocSoton said:
I used S2 Root, and insecure kernal.. doesnt not include CWM, so install RomManager, isntalled CWM but when reboot in boots to android recovery, and i get the verificaiton error, so it wont even load cmw so I cant chose the optin to disable the verification check!!
Click to expand...
Click to collapse
I have the same problem, does anyone has a solution for that. All I want to do is backup the ROM via ROM manager and I couldn't bypass the signature verification. I am also rooted via superoneclick and odin 1.85.
waiting for a response.
Thanks in advance.

antzlisoul said:
I have the same problem, does anyone has a solution for that. All I want to do is backup the ROM via ROM manager and I couldn't bypass the signature verification. I am also rooted via superoneclick and odin 1.85.
waiting for a response.
Thanks in advance.
Click to expand...
Click to collapse
Backup works via CWM and root .
Rom manager not working mostly on SGS2 .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje

Related

Modified CWMrecovery for Odin (DJ05/DL09) Plus new root instructions (Updated 1/15)

Folks, I modified the Odin package that installs clockwork recovery so that it *should* work on any future versions without reflashing kernels, and without rooting your device.
This provides a nice way of rooting your device, because as long as you have the cwm update.zip on your sdcard (at the base) and this Odin flashed, you can root your device by merely installing ChainsDD's superuser package via clockwork recovery.
Odinhttp://www.mediafire.com/?qzcq15423z9i1g7
http://adrynalyne.us/files/odin/Odin3v1.3.exe
The Odin package:
http://adrynalyne.us/files/odin/CWMRecovery_DJ05_DL09.tar.md5
ChainsDD's superuser
[APP] Superuser 2.3.6.1 - Now on the Market [2010-09-05] - xda-developers
(you want the ef version)
My modified ChainsDD superuser +busybox package
http://adrynalyne.us/files/odin/su-2.3.6.1+busybox1.19.zip
update.zip to use with clockwork (goes on base of sd card)
http://dl.dropbox.com/u/2056318/update.zip
If this update.zip gives you trouble, please get it from the source. You will need to rename this file to update.zip.
http://koush.tandtgaming.com/recoveries/recovery-clockwork-fascinate.zip
Simply flash the Odin, boot to recovery, apply update.zip and load the superuser package. Done and done. No rage exploit, no fighting with one click methods.
Or, if you are feeling adventurous, you can try Clockwork Recovery RED, which works 100 times better, but has not been heavily tested with non-voodoo installs. It should be ok though.
http://adrynalyne.us/files/odin/CWMRecovery_DJ05_DL09_RED.tar.md5
This method requires ONLY this Odin method. You do not need update.zip unless using rom manager. Credit jt1134 and supercurio for Red cwm. Credit to squash/times-infinity for the idea
Note to Stock Users​I have found that the stock Samsung kernel is very sneaky and replaces clockwork on the next reboot...it seems to be most common with those who have updated using Verizon's OTA updates. Odin users usually do not see the issue and hence, was tough to track down.
So to alleviate this, please add an extra option to your list of things to do. On FIRST boot into clockwork recovery, please flash your appropriate kernel of choice. For simplicity, I have added a rather plain kernel (non-voodoo) for those who may want to flash their choice of kernel later. This must be done for those who have this problem, no matter if clockwork is red or green.
Kernel download
http://www.mediafire.com/?qzcq15423z9i1g7
So does this effect the red/voodoo CWM that most of us use?
If you are already on red cwm/voodoo, its a non issue.
This only flashes green cwm right now, for the purposes of easy rooting, kernel installing, etc.
like a charm
thanks
Is it impossible to flash D101 without odin? Dumb question i know. Lol
Z an B son!
zachsx said:
Is it impossible to flash D101 without odin? Dumb question i know. Lol
Z an B son!
Click to expand...
Click to collapse
you can install any dl01 rom from cw recovery but you need a the 01 modem to go with it for sms and haptic feedback to work properly.
That modem has to be flashed in odin, if that's what your asking
obededom said:
you can install any dl01 rom from cw recovery but you need a the 01 modem to go with it for sms and haptic feedback to work properly.
That modem has to be flashed in odin, if that's what your asking
Click to expand...
Click to collapse
That's what i thought i was double checking. Thnks for the quick response
Z an B son!
Is anything removed from this package? Like debloated or anything?
Sent from my SCH-I500 using Tapatalk
mamoru16 said:
Is anything removed from this package? Like debloated or anything?
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
it's not a rom, it's some tools to regain root after losing it via OTA update
this is good, much appreciated
-banblah
Hmm the update.zip did not work. I Odined the full DL09 package, and then after a reboot or two, Odined the CWM file. But once I got into normal recovery and tried to apply the update.zip I get this:
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
Any ideas?
Probably the third try doing this, but still no luck =( I'll try the older one click and if that doesn't work I'll have to adb it.
I got the same error and something about IP_PREVIOUS_*_*. *'s denote what I can't remember.
Sent from my SCH-I500 using Tapatalk
I need a full error.
I will re-upload the update.zip.
Actually, I downloaded the update.zip and it works fine.
[[email protected] Desktop]$ adb shell
bash-4.1# rm /sdcard/update.zip
bash-4.1# cd /sdcard
bash-4.1# wget http://dl.dropbox.com/u/2056318/update.zip
Connecting to dl.dropbox.com (50.16.211.15:80)
update.zip 100% |*******************************| 1345k 00:00:00 ETA
Failure of update.zip
I downloaded and it failed also.
Error is: signature verification failure.
Thanks for any help.
Norm883
I had to do it twice. the 1st time it didn't work, and usb stopped working. so i odin'd DL09 again and re- did the process, and re-downloaded the files. It works. Step 1 oden fresh DL09. Step 2 drag and drop update.zip and the su- bla bla bla..zip files to the root of the sd card. Step 3, odin CWM bla bla bla.md5. step 4, boot into recovery. Step 5 update.zip. Step 6, select install .zip, go to SU bla bla bla .zip file and yes to install. reboot and superuser, yay.
SuperOneClick v1.5.5 - Nice work for DL09
Try this one.
SuperOneClick v1.5.5 - Nice worked in DL09 for ROOTED
http://forum.xda-developers.com/showthread.php?t=803682
apnews said:
Try this one.
SuperOneClick v1.5.5 - Nice worked in DL09 for ROOTED
Click to expand...
Click to collapse
No, DON'T.
Any flasher is going to need to Odin in CWM anyway, and screwing around with One Click apps isn't going to advance the ball at all. The method in the first post here not only unlocks recovery and gives root, it teaches the novice flasher how installations will work in the future (get into Clockwork and then apply a zip that's not called update.zip).
Odin Files Link broken
I can not get the new odin files via the link provided
Which? There are several links in the first post.

[Q] Update package error in ROM Manager

Hello all, new user here.
I am trying to install a custom ROM on my Samsung Galaxy SII and am really stuck.
I have rooted the phone, installed ROM Manager and flashed Clockwork MOD Recovery, but when I try to backup my current ROM I see this:
- Initializing package...
Finding update package...
Opening update package...
Verifying update package...
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
I have options to:
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
Does anyone know why this is happening and what I can do to fix it? I am dying to install my new ROM :-(
Any help/advise you can give me will be much appreciated.
skincla
You don't have CWM recovery, that's stock recovery.
skincla said:
Hello all, new user here.
I am trying to install a custom ROM on my Samsung Galaxy SII and am really stuck.
I have rooted the phone, installed ROM Manager and flashed Clockwork MOD Recovery, but when I try to backup my current ROM I see this:
- Initializing package...
Finding update package...
Opening update package...
Verifying update package...
E: Failed to verify whole-file signature
E: Signature verification failed
Installation aborted.
I have options to:
reboot system now
apply update from sd card
wipe data/factory reset
wipe cache partition
Does anyone know why this is happening and what I can do to fix it? I am dying to install my new ROM :-(
Any help/advise you can give me will be much appreciated.
skincla
Click to expand...
Click to collapse
+1. I have the same problem, flashed cwm, did a backup but wasn't taking any notice of the system, later after a few mods trying to sort my calendar out i reverted to my backup to find it didn't bckup at all.
I've emailed the developers but that was 4days ago, still no reply. I wad gona post here but seen as i'm a newbie I get little too no reply if i post.
--
smash
Sent from my GT-I9100 using XDA App
oinkylicious said:
You don't have CWM recovery, that's stock recovery.
Click to expand...
Click to collapse
what's the difference? I thought having cwm installed would automatically work just like any other app..
I'm rooted, using a stock ROM (I'd change it if I got cwm to work), firmware KI8.
--
smash
Sent from my GT-I9100 using XDA App
check this out
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
--
smash
Sent from my GT-I9100 using XDA App
For what its worth.. I tried restoring a backup using RM and ended up in "android system recovery" instead of CWM, and also got installation aborted. After a reboot I ended up in CWM and the restore finished. Strange stuff..
Sent from my SGH-I777 using xda premium
The question for post one is as always .
Does the instructions for the custom rom install say install via Rom Manager .
No idea what the rom is so cannot check .
Most of them say root kernel with Chainfires CWM and root Kernel and flash rom via CWM .
jje
JJEgan said:
The question for post one is as always .
Does the instructions for the custom rom install say install via Rom Manager .
No idea what the rom is so cannot check .
Most of them say root kernel with Chainfires CWM and root Kernel and flash rom via CWM .
jje
Click to expand...
Click to collapse
Hi JJE,
I want to install SensatioN ROM (http://forum.xda-developers.com/showthread.php?t=1194765)
The kernal is installed using Odin, the ROM is installed using Rom Manager.
Skincla
oinkylicious said:
You don't have CWM recovery, that's stock recovery.
Click to expand...
Click to collapse
How do I get CWM Recovery working?
skincla said:
How do I get CWM Recovery working?
Click to expand...
Click to collapse
You need to flash a kernel that has CWM. This is usually done via Odin or Heimdall. Once you get CWM recovery on your phone you'll be set to flash zip files for ROMs and whatnot.
If you don't know how to flash the kernel.. start at the beginning and read a helpful guide or instructions. Sorry on my phone now and don't have any links handy..
Sent from my SGH-I777 using xda premium
skincla said:
Hi JJE,
I want to install SensatioN ROM (http://forum.xda-developers.com/showthread.php?t=1194765)
The kernal is installed using Odin, the ROM is installed using Rom Manager.
Skincla
Click to expand...
Click to collapse
FIRST PAGE SAYS .
If you install for the first time SensatioN ROM, I recommend you to use the WIPE version. The NO WIPE version should be used if you are already on SensatioN ROM or on other fully deodexed ROM.
Before you install SensatioN ROM, make sure that you have CF-ROOT kernel installed on your phone, or ninphetamine.
Steps to install CF-ROOT kernel:
1.Download the kernel from here: http://forum.xda-developers.com/atta...8&d=1312203859
2.Power off phone, and enter in DOWNLOAD MODE
3.Put the downloaded zip into PDA section of ODIN, and flash it
4.Let the phone reboot
Steps to install the ROM:
1.Copy the ROM file on your SD card
2.Reboot you Phone into CWM
3.Navigate to Install Zip from SD Card
4.Select Choose ZIP from SD Card
5.Select SensatioN_ROM_by_CRYSIS_i9100_(no)wipe.zip
6.Wait until the ROM is installed and reboot your Phone.
7.If you have any bootloops with the NO WIPE version, you will probably need WIPE .
No mention of ROM MANAGER here maybe you have other instructions or its the usual ??
--------------------------------------------------
jje
@ OP
Have you tried "Toggle signature verfication check" in CWM?

Clockworkmod

Okay, so I've rooted my phone and installed Clockworkmod.
Before I even think about attempting to install a new ROM I thought I'd back up my existing rom.
I've dl'd clockwork mod yet when I try to create a backup i get...
--Installing package...
Finding update package...
Opening update package...
Verifying update package...
E:Failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I'm new to all this and I'm not entirely sure what's going on here. Hopefully someone could point me in the right direction.
Thanks in advance...
Palerider GB said:
Okay, so I've rooted my phone and installed Clockworkmod.
Before I even think about attempting to install a new ROM I thought I'd back up my existing rom.
I've dl'd clockwork mod yet when I try to create a backup i get...
--Installing package...
Finding update package...
Opening update package...
Verifying update package...
E:Failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I'm new to all this and I'm not entirely sure what's going on here. Hopefully someone could point me in the right direction.
Thanks in advance...
Click to expand...
Click to collapse
That text looks like what you get when you are trying to install a non-signed package and your signature verification is turned on. NOT when you are creating a backup.
Make sure you are choosing backup, not install zip file. If you get that text when choosing a backup, something is wrong with your version of CWM.
Where did you rebooted to Clockworkmode from ROMmanager??
try with Vol-up+Home+Power and select backup option from CWM menu
ZACQ8 said:
Where did you rebooted to Clockworkmode from ROMmanager??
try with Vol-up+Home+Power and select backup option from CWM menu
Click to expand...
Click to collapse
It is indeed when I try to use ROMmanager. Ihave Flashed ClockworkMod Recovery (Current Recovery: ClockworkMod 4.0.1.5) I select "Backup Current ROM" and get the message I posted above.
If I turn the phone off and then try VolumeUp+Home+Power the screen only flashes once and thenjust stays on download mode screen...
strange!!! download mod comes with vol-down, not vol-up
OK, you just flash TAR version of CF-root for your matching kernel, or Siyah kernel from ODIN
and forget ROM manager....there is a compatibility issue for Rom manager and the CWM flashed from that with SGS2
feel free to ask if you dont understand
JUST FLASH STOCK TO GET BACK TO OLD ROM!! you can find all you need in my signature
Ah, Vol-Down... D'oH!
Ok tried that and now I still get the same as before...
Android system recovery <3e>
Enter: OK key. Select : Vol UP / Vol Down
reboot system now
apply update from sdcard
wipe data/Factory reset
wipe cache partition
--Installing package...
Finding update package...
Opening update package...
Verifying update package...
E:Failed to verify whole-file signature
E:signature verification failed
Installation aborted.
I rooted the phone using SuperOneClick...
Do I need to install a custom kernel?
no problem, just flash Siyah or CF-root
you can get CWM working everything flowlessly
I will try that...
Thanks...
Hmm, when I flash the Siyah kernel (using Odin) the phone won't reboot...
I have to reboot in download mode and flash a original BUKG2 kernel to get the phone working again.
I have tried downloading insecure kernels but whenever I try to unzip them it asks for a password?
did you try CF-root
http://download.chainfire.eu/29/CF-Root/SGS2/CF-Root-SGS2_XX_OXA_KG2-v4.1-CWM4.zip
---------- Post added at 06:18 PM ---------- Previous post was at 06:17 PM ----------
insecure is not required now
Palerider GB said:
Hmm, when I flash the Siyah kernel (using Odin) the phone won't reboot...
I have to reboot in download mode and flash a original BUKG2 kernel to get the phone working again.
I have tried downloading insecure kernels but whenever I try to unzip them it asks for a password?
Click to expand...
Click to collapse
When flashing Siyah, did you flash version 3, or 2.6.14 or lower? Version 3 and up is for ICS only.
ctomgee said:
When flashing Siyah, did you flash version 3, or 2.6.14 or lower? Version 3 and up is for ICS only.
Click to expand...
Click to collapse
I hope he would have used that common sense already
ZACQ8 said:
I hope he would have used that common sense already
Click to expand...
Click to collapse
Your faith in my common sense is welcome but misplaced...
I was indeed trying to flash the wrong version of Siyah.
I'm a noob, that's my excuse. Thank you for your patience gentlemen.
All is now well. Thank you for your time and help...
Palerider GB said:
Your faith in my common sense is welcome but misplaced...
I was indeed trying to flash the wrong version of Siyah.
I'm a noob, that's my excuse. Thank you for your patience gentlemen.
All is now well. Thank you for your time and help...
Click to expand...
Click to collapse
Thank GOD....wrong flash dint brick your phone
I am too blamable,didnt realize that the nature of a NOOB which this undersigned also passed through utter blindness than this....
ZACQ8 said:
Thank GOD....wrong flash dint brick your phone
I am too blamable,didnt realize that the nature of a NOOB which this undersigned also passed through utter blindness than this....
Click to expand...
Click to collapse
Not your fault I didn't read the release notes and it all came good in the end.
ZACQ8 said:
I hope he would have used that common sense already
Click to expand...
Click to collapse
Unfortunately, my faith in my fellow man has been eroded over time.
Palerider GB said:
Not your fault I didn't read the release notes and it all came good in the end.
Click to expand...
Click to collapse
Indeed. Please take this lesson to heart; read the entire thread of the thing you intend to install or flash before actually doing so.
ctomgee said:
Indeed. Please take this lesson to heart; read the entire thread of the thing you intend to install or flash before actually doing so.
Click to expand...
Click to collapse
Consider this lesson learned... I'll be much more careful next time.

[Q] Flashing Custom Kernel

I am trying to flash a custom kernel to my device.
This is the kernel: Siyah-s2-v6.0b5-CWM
I am trying to flash it to my Galaxy S2, but when I goto recovery mode, click apply update from sdcard and select the file it shows this.
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
install_package = (2)
installation aborted.
Any ideas what to do?
Are you sure you have CWRecovery & not stock recovery ? Make it easy for yourself & flash the Odin version.
MistahBungle said:
Are you sure you have CWRecovery & not stock recovery ? Make it easy for yourself & flash the Odin version.
Click to expand...
Click to collapse
Odin doesn't work for me as my PC doesn't pickup my phone for some reason. And no I don't have ClockWork that didnt work either.
harrisonkevin said:
Odin doesn't work for me as my PC doesn't pickup my phone for some reason. And no I don't have ClockWork that didnt work either.
Click to expand...
Click to collapse
You need CWM recovery to be able to flash a custom kernel, with one exception, Philz kernel. Flashing Siyah from stock recovery is never going to work. Either read up about Philz kernel and root that way, or click the link in my signature and figure out why your PC doesn't recognise your phone.
Sent from a galaxy far, far away
Are you sure you followed all steps to use odin? Check USB debugging in development settings and try again. Make sure you have installed Samsung drivers in your pc.

[Q] Can't Boot Into Custom Recovery!

Hello.
I have seached this question TO DEATH, and still, no answer to my problem.
I have a Galaxy Player 4.2, rooted, and I used the "Rom Manager" app to flash recovery. If I go to recovery using the app, it boots into stock recovery, and says this:
"--Installing Package. . .
Finding update package. . .
Opening update package. . .
Verifying update package. . .
E: failed to verify whole-file signature
E: signature verification failed
Installation Aborted"
And when I do the 3 button combo, it just does stock recovery
Any help?
The best way to install a custom recovery on the GP4.2 is to flash the stock kernel with cwm made by zaclimon.
http://forum.xda-developers.com/showthread.php?t=2198444
Stock recovery can't install a recovery itself (except on some devices). You must use odin to flash another kernel which includes CWM.
Mavireck said:
The best way to install a custom recovery on the GP4.2 is to flash the stock kernel with cwm made by zaclimon.
http://forum.xda-developers.com/showthread.php?t=2198444
Stock recovery can't install a recovery itself (except on some devices). You must use odin to flash another kernel which includes CWM.
Click to expand...
Click to collapse
Thanks, but it didn't work!
Hum... What did you do exactly ?
I am not a dev and I don't own the 4.2, I can't help anymore
Mavireck said:
Hum... What did you do exactly?
I am not a dev and I don't own the 4.2, I can't help anymore
Click to expand...
Click to collapse
That sucks GP4.2 is pretty awesome
Anyways, I used Rom Manager app and sezlected to flash the I9000 recovery, because people said that that is the second best option.

Categories

Resources