Related
It's nice and only has about a 1/4" of play on the width, but the length is just right. Best fit I could find for this enigma of a tablet.
http://www.bestbuy.com/site/HP+-+Mi...96187925&skuId=9926416#tabbed-customerreviews
edit: Should note that this is more of a sleeve than a case, sorry for not being clear.
will check that out
I will check that out. I wish they had a gel skin!
more of a sleeve than a case. Good find though but i will stick to the gtablet one from sears for $5.
scott
You are right Scott, I have changed my original post.
I couldn't find the Sears case anywhere, so I went hunting.
I saw these cases in person at a local Best Buy store. They are very nice quality padded neoprene cases... much thicker neoprene than the cheap cases on eBay and at Meritline. I didn't have my GTab with me at the time, but it crossed my mind that the case may be a perfect fit for my GTab. I believe they were $19.99 at the store so it seems cheaper online.
Wtang: it has a very nice fit.
They honor the online sale price in store, picked mine up today
FYI, amazon has this product too, for less.
http://www.amazon.com/HP-WV594AA-10...7QD2/ref=sr_1_1?ie=UTF8&qid=1301259161&sr=8-1
Thanks. Will have to check it out next time I am at BB.
Nice ... I got used to my plain black/red Meritline sleeve for my Dell Vostro A9 netbook, and am looking fo rsomething simple and similar. Thanks!
Checked it out at my local Best Buy, the fit was perfect! I'd also agree that the neoprene padding is solid and not flimsy.
Another alternative sleeve would be the "Incase Neoprene Netbook Sleeve - Black - CL57365," also at BB (couldn't post links, sorry). I had my gTablet with me while trying out the sleeves, so I can confirm that the fit was snug for both. Like the OP said, length was perfect, and not too much slack on the width so the gTablet won't slide around. The Incase also had a white faux-fur lining inside.
Ultimately, the zippered storage pocket on the HP sleeve and the fact that Amazon sells it for $10 won me over.
I will try to post some photos of the HP sleeve when it arrives. Thanks OP!
Has anyone purchased this silicone case from Amazon?
http://www.amazon.com/iShoppingdeal...2?s=electronics&ie=UTF8&qid=1317307713&sr=1-2
I ordered one yesterday and I'm hoping it's better than the silicone case I got from China. It's ok but just a little loose. The picture of the case on Amazon looks different so I figured I'd give it a shot since the price was reasonable.
No, but thanks just ordered it. The targus portfolio case is nice for most of the time, but I'm looking for something for around the house.
It's already sold out.
I thought it might go out of stock after people realized it was on Amazon. As stated in my op - the one I ordered from China off ebay is a little to loose. The cutouts are great but I'm looking for something a little tighter.
I can't see the price since it's unavailable. How much did you guys buy it for? Was it better than Sikai's price of $17.00?
I'm not so sure on the design. Back looks kind of weird, Sikai has a grippy texture like micro-cobblestone. Also the Sikai case comes up around the trim of the screen farther than this one. This one looks like an iPad silicone case I bought a year ago that had this thin lip where the edges are and it would fall out extremely easily.
The Sikai case isn't loose at all, it might be based on when you bought it or what color but the clear one I bought is tight as a glove with literally no probability of falling out even holding it one handed. It's very well made.
Case is $10.95 and I have Amazon Prime so shipping was free for me. Maybe I should have phrased my comments regarding the Sikai case differently. I do like the texture of the Sikai case and how much of the TF it actually covers but when I go to pull it out of my bag the edge along the face moves way too easily. Granted it isn't loose to the point of it falling off on its own but it also shouldn't come out with a minor movement - only if I'm trying to remove it intentionally.
http://www.ishoppingdeals4you.com/i...froogle&utm_medium=organic&utm_source=froogle
Added by edit.
The good thing about this silicone case is it also fits the keyboard dock, given you're willing to do some cutting. So, I got 2 pieces, one covering the tablet and one covering the keyboard dock. I'll post a picture tomorrow as I'm too lazy now.
Iso, when you get it can you do a review side by side with the Sikai case and point out the differences and faults?
starting this because i know there are some of us out there who require such a case. Thought we could save each other some time and/or grief and report what's available, what's shipping, what ad hoc solutions we've found, etc.
here's what i've found so far:
i-blason: liked it on N5. ships nov. 25
http://www.amazon.com/i-Blason-Kick...=1415220229&sr=8-2&keywords=nexus+6+belt+case
fosmon: never heard of them. looks like i-blason. ships dec. 1
http://www.amazon.com/Fosmon-STURDY...=1415220229&sr=8-7&keywords=nexus+6+belt+case
cellbee: never heard of them either. looks similar to the generic belt cases sold at verizon typically. ships nov. 25
http://www.amazon.com/dp/B00P1F0AX6?psc=1
supcase: i'll throw this one in here because it claims to be a belt case, but i see no evidence of this from either the pics or the description. ships nov. 29
http://www.amazon.com/SUPCASE-Full-...=1415220229&sr=8-1&keywords=nexus+6+belt+case
apparently this one is now shipping. first one to ship i believe
http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS
Good thread! I just pulled for the Moko. Not only is it supposed to be here Wed, it's a bit cheaper. I use a Steelie in the car and I don't like having the magnet on the phone and in my pocket so instead of having two cases I will just put the Steelie mount on the belt case clip and use it while in the car. For day-to-day I'll use the Moko and not have to worry about switching cases. I hope this works with Qi too.
The Steelie works great in the car as a mount. For the Moto X 2013 I can leave the case with the magnet on and NFC tap-to-pay works. With the OnePlus One, the magnet works great and NFC works but tap-to-pay will not work with the magnet in place. That means if I want to tap-to-pay I have to use a case without the Steelie. I think this Moko arrangement will work a lot better since I won't have to keep changing cases.
Just ordered the case from amazon referred to above.. For 6 bucks, free shipping with prime, and expedited delivery, it's worth giving it a shot. Seems to come in two parts, a protective case plus a seperate belt clip holster for sliding the device in and out of.
indianajonze said:
supcase: i'll throw this one in here because it claims to be a belt case, but i see no evidence of this from either the pics or the description. ships nov. 29
Click to expand...
Click to collapse
from the pics it looks to have a belt clip... the only thing im not to fancy on is the built in screen protector and its added size... everything else looks good IMHO
Seidio Convert
This case is not available or even announced yet, but I'm guessing it's probably in the works right now. In my opinion, Seidio makes the most rugged case for Nexus phones, called the Convert, which comes with a holster/belt clip. I had one for my N4, which got stolen :crying:, and currently have it on my N5 (pic below). If Otterbox had made their Defender case for my Nexuses, I probably would have gotten that instead. The Convert has no built in screen protector and is kind of pricey, but has major protection.
Seidio Convert for Nexus 5:
http://www.seidioonline.com/lg-google-nexus-5-convert-value-pack-black-p/bd5-hkr4lgn5.htm
seidio is mia. i ve emailed them a dozen times with nothing more than "we're looking into it". can't wait. got the moko case and it looks like a winner, esp for $2
I ordered the moko for 2 dolla. Mainly just for when I'm at work. I ordered a dbrand skin for the back too. Hopefully it won't interfere with the case fitting. If it does...the case was 2 dollars. Lol.
actually...that moko case is a damn fine case. looks like it will do everything i need it to do. of course, i don't have the fn nexus 6 yet to test it in the field, but it looks like it'll do the job just fine. best $2 case EVER...
I would love seidio to make a case for the nexus 6 but all I got was the generic response too. " we are looking in to it". Its too bad because I love their spring clip on their holsters. I looked into moko and unicorn beetle but didn't like the release of either if them. The spring clip from seidio is the best.
received the i-blason case today. i thought it was identical to the moko case but there are several key differences to note:
1. rubber section is far thicker and of a better quality than the moko. the moko was driving me crazy with the amount of dust it was attracting. this one is a much harder/more durable rubber. it's MUCH better
2. having said that, because its thicker, the buttons are a bit harder to press, particularly the power. works perfectly mind you, just takes a bit more effort to press
3. the hard shell is slicker than the moko. hopefully this will wear off soon as its fairly slippery as it stands now
4. the belt clip section is a clip in rather than a slide in. only got it tonight so i have yet to try it in the field. seems secure enough, though not as secure as the slide in of the moko. the advantage here though is i can take this out of the clip MUCH faster than the moko
5. if you have the moko, you can use this on the moko slide in belt clip if you prefer. i'm going to try the clip in holster for a bit to see how i like it
overall, a very solid alternative to the moko, particularly if you were getting annoyed by the cheap rubber collecting dirt
I got the SupCase Unicorn Beetle from amazon on sell for $12 taxes n shipped yesterday, actually received my nexus yesterday too. I got that price because the case wasn't out yet when I ordered it so it had them listed for $7.99 at the time.
So far I am very impressed with the quality. The built in screen protector is actually useful and doesn't hinder the screen at all. I did notice a bit of glare under certain lighting but nothing too annoying.
It does come with a belt clip and its a bit different from what I had on my note 2 but so far its functional and very sturdy product. Highly recommend.
well seidio finally has a nexus 6 page now. still coming soon and notify me crap, but its a start i guess
http://www.seidioonline.com/Google-Nexus-6-s/9492.htm
indianajonze said:
well seidio finally has a nexus 6 page now. still coming soon and notify me crap, but its a start i guess
http://www.seidioonline.com/Google-Nexus-6-s/9492.htm
Click to expand...
Click to collapse
i really hope for a Seidio Dilex and holster combo!
Combination
I like to show off my Nexus and I have had too many bad experiences with belt clips with single clips. My combo is this Spigen case http://www.amazon.com/gp/product/B00OH4I7UU/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2SFKRF5TPZMT5 and this holster http://www.amazon.com/Nexus-Holster-Pouch-Protector-Cover/dp/B00OX3Z89S/ref=sr_1_7?ie=UTF8&qid=1419472114&sr=8-7&keywords=case+for+belt+nexus+6
G1Master said:
I got the SupCase Unicorn Beetle from amazon on sell for $12 taxes n shipped yesterday, actually received my nexus yesterday too. I got that price because the case wasn't out yet when I ordered it so it had them listed for $7.99 at the time.
So far I am very impressed with the quality. The built in screen protector is actually useful and doesn't hinder the screen at all. I did notice a bit of glare under certain lighting but nothing too annoying.
It does come with a belt clip and its a bit different from what I had on my note 2 but so far its functional and very sturdy product. Highly recommend.
Click to expand...
Click to collapse
Just ordered one. Cannot wait for it to arrive. I have had a UAG case on it since day one and I cannot take photos with the flash on. It leaves a smoky affect in the photos. How are photos with the flash on with the supcase?
seidio cases are shipping. black surface case/clip combo anyway. all other colors are coming soon still. just ordered mine
http://www.seidioonline.com/motorola-nexus-6-surface-kickstand-combo-black-p/bd2-hr3mtn6k-bk.htm
indianajonze said:
seidio cases are shipping. black surface case/clip combo anyway. all other colors are coming soon still. just ordered mine
http://www.seidioonline.com/motorola-nexus-6-surface-kickstand-combo-black-p/bd2-hr3mtn6k-bk.htm
Click to expand...
Click to collapse
Please, if you have any other cases laying around, let us know if the holster would work with the Surface holster. On past phones, I know I could get other cases (not all) to work with Surface and Dilex holsters. I have the Supcase hybrid case now. If Amazon were selling the holster, Id buy it in a heartbeat to test, because I know I could easily return it to Amazon.
I got my Unicorn Beetle Pro this past monday and I'm impressed with the quality. The only real complaint that I have about it is that they didnt flatten out the back of the case so that the phone lays flat on a table or something. Most annoying thing ever to lay your phone on the desk and try to do something on it only to have it start wobbling away.
crackberry.com has the seidio active case for 31.95, ships 1/22, use coupon code JB15 for 10% off NOTE. The cases and holsters are sold seperately, great if you just want the holster, or just the case.
http://shop.crackberry.com/nexus-6-cases-browse.htm
Just ordered one and I will try to keep everyone posted on how it works out. $5.95 hopefully this will work out for those of us that need a more rugged case! http://www.amazon.com/dp/B00E4RV8DS
Your URL doesn't work. I believe http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS is it?
zephiK said:
Your URL doesn't work. I believe http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS is it?
Click to expand...
Click to collapse
Yeah thanks that's it! Not sure what went wrong with the URL
msd24200 said:
Just ordered one and I will try to keep everyone posted on how it works out. $5.95 hopefully this will work out for those of us that need a more rugged case! http://www.amazon.com/dp/B00E4RV8DS
Click to expand...
Click to collapse
There another OP for this case, it actually increased to 3x what it originally was. It was 1.99 a week ago.
I'm already using this case, it's amazing for $1.95
agreed i picked up this case on the 9th when it was for pennies. for the price it far exceeds in all areas. OP you will enjoy it for sure.
I bought this case when it was $1.95 on Amazon Prime, and I have to say, I actually feel more secure with the phone in a Spigen. The moko's "rubber" shell is too lose, and the plastic case is too thin and flimsy, much more thinner than a Seido Dilex or an Otterbox Commuter. I think I may just stick with a Neo Hybrid for now and just give away the Moko to someone on XDA.
Thanks for the info everyone
PaisanNYC said:
I bought this case when it was $1.95 on Amazon Prime, and I have to say, I actually feel more secure with the phone in a Spigen. The moko's "rubber" shell is too lose, and the plastic case is too thin and flimsy, much more thinner than a Seido Dilex or an Otterbox Commuter. I think I may just stick with a Neo Hybrid for now and just give away the Moko to someone on XDA.
Click to expand...
Click to collapse
Totally agree with you. I got this case when it first became available. It has a really nice feel and looks great. However the tpu inner/outer shell is very flimsy, especially around the lip of the phone and has the look and feel as though debris could easily enter from the cutouts. The fitament on the phone in the case itself is just OK. The phone does not clip in, rather it slides in from the side making it awkward for some to quickly access. If your looking for something to put on your belt it works.
Sent from my Nexus 6
swiftchancelor said:
Totally agree with you. I got this case when it first became available. It has a really nice feel and looks great. However the tpu inner/outer shell is very flimsy, especially around the lip of the phone and has the look and feel as though debris could easily enter from the cutouts. The fitament on the phone in the case itself is just OK. The phone does not clip in, rather it slides in from the side making it awkward for some to quickly access. If your looking for something to put on your belt it works.
Sent from my Nexus 6
Click to expand...
Click to collapse
It isn't TPU, it is rubber...and the fit on my 32GB N6 is great...only complaint is that the holster doesn't have a locking clip. For a sub-$10USD rugged case you cannot do better. Heck Seidio and Platinum sell the same thing for $60USD for other phones.
Skripka said:
It isn't TPU, it is rubber...and the fit on my 32GB N6 is great...only complaint is that the holster doesn't have a locking clip. For a sub-$10USD rugged case you cannot do better. Heck Seidio and Platinum sell the same thing for $60USD for other phones.
Click to expand...
Click to collapse
The Seidio Dilex line of cases are more sturdy and rugged. And the Seido spring-loaded holsters make it quicker to release the phone off the belt. The Moko is a great sub-$10 case, but it cannot go up against a Seidio/Platinum case.
PaisanNYC said:
The Seidio Dilex line of cases are more sturdy and rugged. And the Seido spring-loaded holsters make it quicker to release the phone off the belt. The Moko is a great sub-$10 case, but it cannot go up against a Seidio/Platinum case.
Click to expand...
Click to collapse
LOL....as an owner of a couple Seidio cases and a Platinum case...the Moko comes from exactly the same Chinese OEM and is made from exactly the same stuff (rubber/plastic). The only difference being Seidio has a metal kickstand.
Skripka said:
LOL....as an owner of a couple Seidio cases and a Platinum case...the Moko comes from exactly the same Chinese OEM and is made from exactly the same stuff (rubber/plastic). The only difference being Seidio has a metal kickstand.
Click to expand...
Click to collapse
Got proof or just heresay?
PaisanNYC said:
Got proof or just heresay?
Click to expand...
Click to collapse
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Skripka said:
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Click to expand...
Click to collapse
So it's speculation. Just wanted to make it clear. Thanks
Skripka said:
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Click to expand...
Click to collapse
Lol, you ain't lying about the lawsuits. I should be getting the i-blason case here in the next couple days, it was actually sub $10 when I scooped it up as well. Looks almost the same minus the holster and the design on the rubber, even the plastic outter clip looks identical. Don't get me wrong, the Moko isn't bad at all.. I'm just a bit ocd about the loose edges and small gaps near the cutouts. I feel like over a short period of time they'll get lose.
Sent from my Nexus 6
I may order one of the poetic revolution cases while they are still cheap. My moko should be her on 12/3
Ordered the orzly tempered glass screen protector a few minutes ago as well
OK the moko came in today and first impressions are really good! Not sure yet how it will hold up but the fit is great. All the buttons feel great! The case actually looks pretty good (granted looks are in the eye of the beholder as they say). The kickstand doesn't seem to bad. For a rugged case, its actually surprisingly slim which may make a lot of people happy.
Now for the bad as others have mentioned pulling the phone out of the holster causes the rubber part of the case to pull away from the phone. Not real bad but it does. The phone slides into the case but its a tight fit.
All in all I paid $5.95 + shipping on Amazon for this case and initial impression is for that price if you need a case it's a great buy. Just noticed the price is now $6.95 so if your looking for a decent cheap case I'd buy it before the price goes up. I'm going to use it until I find a satisfactory higher end case.
I did order a poetic revolution case as well and when it comes in I'll let you all know who it is.
Hi all! My first few days after having purchased my OP6T, I hopped on eBay and ordered a bunch of cheap and a couple not-so-cheap cases, mostly from China with slow-as-dirt shipping (why is dirt considered slow? Ever seen a mud slide? They can be pretty quick!) Well, the first case to arrive is this Mofi fabric case and it was one of the not-so-cheap cases (I splurged and spent $12 on this one).
I'm doing a very quick mini review of this case for now and will come back and flush this out with my own photos and all when I have more time when I'm not working. What questions do you have that you want to see answered in a more thorough review?
tl;dr summary
I purchased the "Grayish blue stripe" model because I wanted a low contrast difference from the top and bottom patterns. I very much like the results. This is a very nice case. Cutouts are spot on, buttons are clicky, slider is easily slid, and it feels great in hand! The TPU has a rounded smooth surface on the sides (reminds me of the sides of an Incipio DualPro case - that's why I use "rounded smooth" to describe it). I currently own the OP Nylon case and the minimal Karbon case. I already like this case much more than the Nylon case from OP. It seems to offer similar protection while being a tad less bulky.
The case itself is made of three materials: TPU (sides), hard plastic (back inside), and cloth (back outside). There is no microfiber lining on the inside, which is a little concerning (and my biggest issue with this case).
Pros:
Feels great in hand
Much softer "fabric" feel than the OP Nylon case, which doesn't feel "fabricky" at all
Nice tight fit but easy enough to get on and off
Nice clicky buttons
Not bulky. Much less bulky compared to the OP nylon case
Tight-woven fabric that I don't think will snag as easily as some crappy fabric cases
Definitely doesn't feel like a cheap $2 case - premium enough to justify the cost
Cons:
A little pricey at $12 for an eBay case but really not too bad
Sides aren't also fabric like the Pixel cases
Silver branding is a bit obnoxious (I haven't attempted to remove it as I'm afraid to snag the fabric in doing so)
No microfiber lining on the inside of the case against the glass
This is the listing I purchased from. The seller has a bad review history but it's because of his lack of review history and 1 bad review. When I left my positive review, it bumped him from 50% to 66.7%. That one bad review is b/c the seller misclassified a listing as shipping from the US and not China. Had no problems here since I expected it to ship slow as dirt. I explain all of this mostly because I was unable to find any other sellers for this design & this one looks sketchy as hell. I had no issues on my purchase, so there's at least 1 legit happy customer with him & he's not padding his #s with fake buyers!
Here are some stock photos of the style I purchased:
View attachment 4647749
View attachment 4647750
Thanks for the well-written review. I'll pass on this case.
This is the listing I purchased from. The seller has a bad review history but it's because of his lack of review history and 1 bad review. When I left my positive review, it bumped him from 50% to 66.7%. That one bad review is b/c the seller misclassified a listing as shipping from the US and not China. Had no problems here since I expected it to ship slow as dirt. I explain all of this mostly because I was unable to find any other sellers for this design & this one looks sketchy as hell. I had no issues on my purchase, so there's at least 1 legit happy customer with him & he's not padding his #s with fake buyers!
Click to expand...
Click to collapse
Lol, I am that bad review. I specifically was looking for an American shipper so I didn't have to wait for a month to get it. I could have ordered 3 cases for the price of one from Aliexpress and waited the same amount of time. Essentially the dude is just drop shipping from china with a markup.
I love the Mofi cloth cases. They look and feel great. I have ordered one in every color available from aliexpress for other phones for like 5$ each.
Nicelysedated said:
Lol, I am that bad review. I specifically was looking for an American shipper so I didn't have to wait for a month to get it. I could have ordered 3 cases for the price of one from Aliexpress and waited the same amount of time. Essentially the dude is just drop shipping from china with a markup.
I love the Mofi cloth cases. They look and feel great. I have ordered one in every color available from aliexpress for other phones for like 5$ each.
Click to expand...
Click to collapse
Lol. Small fricken world.
Nicelysedated said:
Lol, I am that bad review. I specifically was looking for an American shipper so I didn't have to wait for a month to get it. I could have ordered 3 cases for the price of one from Aliexpress and waited the same amount of time. Essentially the dude is just drop shipping from china with a markup.
I love the Mofi cloth cases. They look and feel great. I have ordered one in every color available from aliexpress for other phones for like 5$ each.
Click to expand...
Click to collapse
Hah! That's pretty funny!
I agree, he's doing that. However, I couldn't find this specific design anywhere else other than this one guy's listing on Ebay. Seems to no longer be available there although I haven't since searched very long & hard. I specifically wanted this design, even if I had to pay a $7 premium for it.
Also, for the record, mine was clearly shipped from China and I knew this going into the purchase. So I think he might have had an honest mistake with the listing you purchased, although that's pure speculation. No trickery with me.
I owed one of this. Even though the case is stylist but it collect dust overtime on the side. I switch back to stock case and ordered bumper case from On plus
Sent from my ONEPLUS A6013 using Tapatalk
x1tymez said:
I owed one of this. Even though the case is stylist but it collect dust overtime on the side. I switch back to stock case and ordered bumper case from On plus
Sent from my ONEPLUS A6013 using Tapatalk
Click to expand...
Click to collapse
Which bumper case did you get? I have the Nylon case and I like this one SOO much more! The Nylon case is just too slippery for a fairly bulky case.
Can you share real pictures?
Jaxidian said:
Hi all! My first few days after having purchased my OP6T, I hopped on eBay and ordered a bunch of cheap and a couple not-so-cheap cases, mostly from China with slow-as-dirt shipping (why is dirt considered slow? Ever seen a mud slide? They can be pretty quick!) Well, the first case to arrive is this Mofi fabric case and it was one of the not-so-cheap cases (I splurged and spent $12 on this one).
I'm doing a very quick mini review of this case for now and will come back and flush this out with my own photos and all when I have more time when I'm not working. What questions do you have that you want to see answered in a more thorough review?
tl;dr summary
I purchased the "Grayish blue stripe" model because I wanted a low contrast difference from the top and bottom patterns. I very much like the results. This is a very nice case. Cutouts are spot on, buttons are clicky, slider is easily slid, and it feels great in hand! The TPU has a rounded smooth surface on the sides (reminds me of the sides of an Incipio DualPro case - that's why I use "rounded smooth" to describe it). I currently own the OP Nylon case and the minimal Karbon case. I already like this case much more than the Nylon case from OP. It seems to offer similar protection while being a tad less bulky.
The case itself is made of three materials: TPU (sides), hard plastic (back inside), and cloth (back outside). There is no microfiber lining on the inside, which is a little concerning (and my biggest issue with this case).
Pros:
Feels great in hand
Much softer "fabric" feel than the OP Nylon case, which doesn't feel "fabricky" at all
Nice tight fit but easy enough to get on and off
Nice clicky buttons
Not bulky. Much less bulky compared to the OP nylon case
Tight-woven fabric that I don't think will snag as easily as some crappy fabric cases
Definitely doesn't feel like a cheap $2 case - premium enough to justify the cost
Cons:
A little pricey at $12 for an eBay case but really not too bad
Sides aren't also fabric like the Pixel cases
Silver branding is a bit obnoxious (I haven't attempted to remove it as I'm afraid to snag the fabric in doing so)
No microfiber lining on the inside of the case against the glass
This is the listing I purchased from. The seller has a bad review history but it's because of his lack of review history and 1 bad review. When I left my positive review, it bumped him from 50% to 66.7%. That one bad review is b/c the seller misclassified a listing as shipping from the US and not China. Had no problems here since I expected it to ship slow as dirt. I explain all of this mostly because I was unable to find any other sellers for this design & this one looks sketchy as hell. I had no issues on my purchase, so there's at least 1 legit happy customer with him & he's not padding his #s with fake buyers!
Here are some stock photos of the style I purchased:
View attachment 4647749
View attachment 4647750
Click to expand...
Click to collapse
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
Jaxidian said:
Which bumper case did you get? I have the Nylon case and I like this one SOO much more! The Nylon case is just too slippery for a fairly bulky case.
Click to expand...
Click to collapse
I got Nylon Karbon bumper case. Should arrive soon. Shipping take longer since I don't order from OnePlus store.
Sent from my ONEPLUS A6013 using Tapatalk
Mofi do quality stuff. Have probably had 30+ cases from them during the past 2-3 years. Highly recommended.