Related
ive done every root method and still nothing can someone help
Quote:
Originally Posted by Indirect
...
1. Setup SDCard
Using a new SDCard (not one you have info stored on) make a new MSDOS partition table and add a 50 MB FAT32 partition as the first primary partition. Then make sure you enable to boot and lda flags.
Any SDCARD larger than 50 MB should work but I used an extra 2GB laying around. You can add other partitions to the card if you want, but it is not necessary to allocate the entire card. Any added partitions would need to be manually mounted on your Nook anyway.
I used GParted on my Ubuntu machine to do this but any formating tool should work.
2. Copy Files onto SDCard
You can grab the files I used here:
http://www.mediafire.com/?dr6bqau194389te
Just UnZip the files directly to the root of the boot partition you created above (make sure flashing_boot.img, u-boot.bin, and boot.img are on the root not the folder SDCARD)
3. Insert SDCARD into NT
Now, with your NT powered off, eject the SDCARD you just created from your computer and insert it into the tablet. Then just turn it on and VOLA! You should now be in CWM!
Symptoms:
With the SDcard (from above) inserted and the NT powered on, the NT shows a black screen for about 3 minutes, and then boots the internal memory.
Removing MLO from the SDcard causes normal NT internal memory booting, so clearly the NT boot process is looking at the correct place on the SDcard (note that the MLO for 1.4.0 and 1.4.1 are identical).
So, unless I am doing something really stupid, there's something different between the two NTs I've owned. Note that "bauwks" had a problem booting from the SDcard, unless he had the USB cable connected, but others have not seen that symptom.
I rooted my NT 16GB by following this post and it worked well:
http://forum.xda-developers.com/showthread.php?t=1798439
Penguin101 said:
I rooted my NT 16GB by following this post and it worked well:
http://forum.xda-developers.com/showthread.php?t=1798439
Click to expand...
Click to collapse
thamks for the rely but ive tried that already
So you wrote all the files you unzipped from the download to the sdcsrd, inserted the SD into your Nook and rebooted...do you get the box when you reboot?
Just checking, you're holding down both the power button and "n" button when powering on the tablet?
NikkieL
Sent from my Barnes & Noble Nook Tablet using xda premium
This is too complicated, really.
Just got a used NT16. Previous owner factory restored. Downloaded img file from:
[SD Root] Make 16 or 8GB Nook Tablet Root SD Cards by Albert Wertz [SDNT16or8gbV4.7]
No instructions on how to mount image to SD card for Mac (it says just google it...)
Google did not turn up a clear result.
So I finally Googled the right query: how to burn an ISO on a USB drive on Mac OS X
And in turn gave me this - how to mount the image:
"Directly from the Ubuntu download page (my formatting):
Download the desired file
Open the Terminal (in /Applications/Utilities/ or query Terminal in Spotlight)
Convert the .iso file to .img using the convert option of hdiutil (e.g., hdiutil convert -format UDRW -o ~/path/to/target.img ~/path/to/ubuntu.iso)
Note: OS X tends to put the .dmg ending on the output file automatically. Remove the .dmg extension as necessary, mv ~/path/to/target.img{.dmg,}
Run diskutil list to get the current list of devices
Insert your flash media
Run diskutil list again and determine the device node assigned to your flash media (e.g. /dev/disk2)
Run diskutil unmountDisk /dev/diskN (replace N with the disk number from the last command; in the previous example, N would be 2)
Execute sudo dd if=/path/to/downloaded.img of=/dev/rdiskN bs=1m (replace /path/to/downloaded.img with the path where the image file is located; for example, ./ubuntu.img or ./ubuntu.dmg).
Using /dev/rdisk instead of /dev/disk may be faster.
If you see the error dd: Invalid number '1m', you are using GNU dd. Use the same command but replace bs=1m with bs=1M.
If you see the error dd: /dev/diskN: Resource busy, make sure the disk is not in use. Start the 'Disk Utility.app' and unmount (don't eject) the drive.
Run diskutil eject /dev/diskN and remove your flash media when the command completes
Restart your Mac and press Alt while the Mac is restarting to choose the USB stick"
So.........
I followed the instructions to a tee. I am using a 128 MB SanDisk micro SD card.
I inserted the card in my Nook and powered it off. Put the USB cable in and after many minutes the Nook turned on. All it did was power on like normal. Once, I removed the SD card while nothing was happening (waiting for boot). Intermittently (as a result?), I was unable to turn Nook on at all, thinking it was bricked. So, I tried the SD card again, and again after several minutes it turned on. Have removed the card now and Nook works like normal again.
So, I have a 16GB Nook Tablet with 1.4.3 and would like to root it AND flash Android which may require who knows how many sd cards and various recovery modules. I would like to say I love learning how to do all of this, except these instructions are always written by developers FOR developers. Perfect example is the Bishop of Technology. One page leads to another and then another. There is no definitive answer to be found on his site. My favorite part is where he says "now take out the boot card and insert ("vague") custom ROM. And then says, now you might want to backup (using CWM). This is all on the page for installing Jellybean on 1.4.3. The whole page is a mish-mash of vagueness and redirection. That is why I tried installing directly from XDA instead.
But, like I said, I was unsuccessful. And I'm not willing to risk trial and error or spend another four hours digging around trying to find the meaning of every instruction. How hard is it to go into a bit more detail and include links every time appropriate. (insert custom ROM - this is vague and no link is shown for downloading the custom ROM.)
Should I get a 2GB sd card so I can install 142 (500MB) first?
Maybe rdisk was to fast and corrupted the image?
Maybe try this. http://forum.xda-developers.com/showthread.php?t=1494367
Sent from my Barnes & Noble Nook Tablet using Tapatalk
Hi,
I have successfully installed plasma active ( Stable Image - without hardware acceleration ) on my "/data" partition which has only 1.5 Gb space following the instructions on this page -> h t t p://share.basyskom.com/plasma-active/archos_gen9.html
It worked well for while but later it started lagging and I was never able to play music or videos then when I try to open any application it shows the loading animation at the bottom but it won't start.
so I went to terminal and I typed this command : df -h
and I found the "/data" partition had 100% usage and no free space .
So, regadless the above details is it possible to install Plasma Active on the hard disk - which is 250Gb in my case - using the instructions at the end of this page
h t t p://share.basyskom.com/plasma-active/archos_gen9.html
Setup a Android™ and Plasma Active dual Boot System
Preparations:
Mirco SD card (minimal 2 gigabyte) and a card reader working on your Linux Host system.
Download the related kernel: zImage - without hardware acceleration or zImage - with hardware acceleration, but less stable
Please note, those zImages contain a different kernel default bootcmd. The root filesystem of this zImage will be expected on a micro SD Card pluged into the reader of your tablet.
Now you have to prepare the mirco SD Card by creating a single primary partition with 'ext4' filesystem. You should use the tools 'fdisk' and 'mkfs.ext4' as root on a Linux host system for this purpose.
Please follow the discribed steps in previous 'Create a new filesystem on the data partition' section by using the micro SD Card partition instead the discribed ARCHOS device
Finally you have to follow previous 'Put the image on the device and create an empty initrd' section with the downloaded and into 'zImage' renamed 'zImage-for-< type >-rootfs-on-external-micro-SD' file.
Please note, do not delete the Android kernel.
Click to expand...
Click to collapse
regards,
Mostafa
Im fully aware that this is more for the development of the Ubuntu Touch, yet because I wanted to start developing, I ended up attempting to dual boot Ubuntu 13.10 alonside Windows 8 to create a proper developing enviornment to learn more about kernel/AOSP build development. VMs wont cut it, as I was advised.
I ended up being able to dual boot Ubuntu 13.10 alongside Windows 8. I had troubles creating a partition for Ubuntu and seemed to have accidentally formatted the biggest drive, which I believe was where the Windows 8 OS was stored. I successfully put Ubuntu on there, installation working smoothly, or so I thought. Upon restart, I entered the GRUB boot selector. I first attempted to enter the Ubuntu OS, which brought me to a black writable page. I restarted the HP and tried booting into Windows 8. It gave me the error that the OS is missing. Now Im stuck in the bootloader and cant access my PC. I have an HP Dv6-6033cl laptop with a 750 hard drive I believe. Any help is appreciated.
Ouch.
If you formatted the Windows partition from NTFS over to ext3 and put Ubuntu on that partition... You've pretty much guaranteed you'll be starting over from scratch.
Ouch.
Before doing anything drastic, get a friend to burn a copy of System Rescue CD for you. Enter Bios and set Boot from CD as the first choice, then boot the Rescue disk. Inspect your drive with the G-Parted tool and find out where you stand with the various partitions.
If your Windows (the partition all the way to the left in the GUI) was indeed formatted to something like ext3, I'm not sure what can be done. If it is still NTFS and you have a Windows CD you can attempt a repair. There are programs out there that will help recover lost files if you can restore Windows, such as iCare Data Recovery.
Did I say "Ouch?"
Ouch.
It may just be a bad flag in the GRUB. Let's hope so. Otherwise... Ouch.
Well this is what it looks like so far:
I know I have two options; completely boot Ubuntu OS or Windows. Only issue is, Id rather not lose all my data.
*Please note - I am not IT trained - this is my amateur advice as someone who has had similar issues. Others (including trained persons) may have wildly different opinions on how you should proceed. I offer this advice in hopes it helps you recover your computer. I can make no guarantees. Proceed at your own risk. This is in no way superior to seeking a qualified repair at a reputable shop which would be the optimal solution.
OK it looks like you didn't overwrite/reformat your Windows partition. It does have issues. (It's labeled sda1/system.) The boot flag is missing, That's likely a bad GRUB install. The used and unused numbers don't add up so it's not being read correctly (possible damaged registry). sda4 is most likely the factory recovery partition for Windows.
Did you make a Recovery Disk? Tell me you did and you can find it...
If it was me, I'd do the following.
Insert your Recovery Disk and attempt a Windows repair
Assuming you can boot into Windows after the repair: make a full set of Backup disks
Make note of how much space Windows and associated program/files are using on the hard drive - you'll want this for reference later
If you have a Recovery Disk and a set of Backup disks you can get back to where you are at any time
Boot into System Rescue CD again, start GParted and begin work on your partitions
Your partitions are nonsensical - partition sda2 (Ubuntu) is only 200 MB which is way too small to be of any use for a working OS, you should probably wipe out partitions sda2, sda3, sda5 and the unallocated space - if it were me I'd take out sda4 as well (you have Recovery disks and you want that space)
Format all the partitions you are reclaiming as NTFS (for now) - Merge all contiguous partitions
Now you can make two separate and distinct choices:
EITHER
A) Keep your Windows install (sda1) and move it to the beginning of the drive (left side of the graphic representation bar) - Moving can cause data corruption (so they warn, but I didn't have an issue when I did this) - moving the partition will save you a lot of time
OR
B) Erase your current Windows by formatting sda1 as a new NTFS partition and merging it with the other space - you should then have one seamless NTFS partition - Use your Recovery and Backup disks to reinstall Windows and recover program/files - This takes longer, but a clean install is always nice.
If you use A) from above, you should have a free 124 GB partition at the end of the hard drive for your Ubuntu install. You can format it as ext3 or ext4 (using GParted) before installing Ubuntu... Or you can just let Ubuntu format it during the install.
If you use B) from above you should decide how much space you want for Ubuntu. Leave enough room for Windows to grow, but give ample space for Ubuntu as well. Create a new partition at the end of the drive in the size you've chosen for Ubuntu and format it as ext3 or ext4. Install and recover Windows files/programs to the NTFS partition at the beginning of the hard drive. Install Ubuntu to the ext partition at the end of the hard drive.
Good Luck!!!
I ended doing a full boot of Ubuntu, since I formatted my Windows 8 partition. I messed up pretty badly, but doing a full install of Ubuntu saved my computer. Unfortunately, I did lose my files. I believe so anyway. Thank you anyway. I will keep this tabbed and refer it to anyone that ever has any issue as I did!
xTurtlex said:
I ended doing a full boot of Ubuntu, since I formatted my Windows 8 partition. I messed up pretty badly, but doing a full install of Ubuntu saved my computer. Unfortunately, I did lose my files. I believe so anyway. Thank you anyway. I will keep this tabbed and refer it to anyone that ever has any issue as I did!
Click to expand...
Click to collapse
According to the screen cap you showed, it looks like Windows is still salvageable... Or did you do something else after the screen cap was snapped?
I completely formatted the hard drive to run Ubuntu. I doubt its salvageable without a huge fee.
RumoredNow said:
According to the screen cap you showed, it looks like Windows is still salvageable... Or did you do something else after the screen cap was snapped?
Click to expand...
Click to collapse
I came across a forensic tool called TestDisk. I have an external hard drive I can use to back up all my lost files onto. Viable solution?
Ok just advice if your installing Ubuntu. When you get asked how u want to install ubuntu always hit 'something else' that's the safest way.
If u have windows installed ... then I feel sorry for you lol
After installing ubuntu on another partition on windows hdd you find only ubuntu is able to boot
Why not just edit grub config,
Add
Title windows
Set root='hd*,msdos*'
Chainloader +1
That will add an option under ubuntu boot screen [grub] to boot windows boot loader [dual booting]
Partitioning advice;
The reason to separate so much is iit makes it 100x easier to restore/backup if something goes wrong. [Ubintu once gave me an error after fresh install using a disk]
sda1 /boot
sda2 /
sda3 /home
sda4 /swap
sdb1 windows
sdb2 storage space to share between OS's
sd** [only good if you use linux alot] extra hdds in a lvm [turns all spare hdds into one folder e.g 1tb 500gb 250gn hdds will become a 1.75tb folder]
Another example of why to hate Windows 8. They started securing the boot loader to make it extremely difficult to dual boot another OS with it. I used to like Windows but it seems to get worse with each iteration.
Sent from my SGH-M919 using xda app-developers app
lalec said:
Another example of why to hate Windows 8. They started securing the boot loader to make it extremely difficult to dual boot another OS with it. I used to like Windows but it seems to get worse with each iteration.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Yup but its been crap since the original dos code was found in the bin.
So its been worthless from the start winxp was just about bare able.
Main problem with windows though is why should we have to pay for half ass work and then pay to patch up the holes with antivirus's
When I can install linux free be more secure and be free to change any part of os I please.
Sent from my GT-I9505 using xda app-developers app
Just got my Teclast-X98-Air II.
It's great and works just fine, but I don't really use the android on it as I have an android phone and I bought this only for the Windows part.
How do I remove the android part? Or, if its impossible/very complicated - how do I give more partition space to the Windows? As default it's 50:50.
Thank you. (and sorry for my english )
I would really love to know this too. Have you found an answer yet?
I reached the point where regrettably I could not have both Windows 10 and Android on my lowly Teclast x98 Air II, as the 32GB memory just was not enough for both operating systems. After doing considerable research on the subject, the best options (which were not exactly for my tablet), involved reinstalling Windows, and in the process removing the Android partitions.. Personally I found this to be painful and a lot of work when my Windows was running perfectly, but lacking storage. Therefore I decided to see if there was the possibility of using the Windows Disk Management program to allow me to delete the Android partitions and allocate the freed up space for Windows. Here is briefly what I did:
- Run the Disk Management program
- You should see several partitions, 3 have no File System associated with then (DO NOT TOUCH THESE), many (10+) have a File System of type "RAW" (Android partitions) and one should be of type NTFS (your Windows partition)
- On each of the partitions of File System type RAW, right click and select "Delete Volume" to delete the partition and free up the space.
- Once you have removed all the partitions of File System type RAW, you should have about 10GB of unallocated space. Format the drive to the default Windows File System type of NTFS and you should then have a new drive of 10GB, which you can use to offload some of the storage from your C: drive.
My only quip with this is that I could not extend the C: drive with the freed up space due to the order the partitions were created in, and if you want to add the 10GB of the freed up Android partitions you will have to reinstall Windows as per:
https://www.youtube.com/watch?v=sNLPm0EQqA0
Is there any guide or tutorial on how to setup a dual boot when Remix OS for PC is already installed on primary partition and wanting to install a second OS (Windows) on remaining empty disk space (NTFS)?
You might find some hints here https://goo.gl/N9S9zE
---------- Post added at 08:01 AM ---------- Previous post was at 07:46 AM ----------
Should maybe add that the only diifference is that you will have to prepare the partitions using live media. Windows and Linux installers do the job, or GParted on a Linux USB-stick
The only difference with what?
You will want to shrink the partition to be able to create and format a ntfs partition on the disk space not needed by RemixOS. Don't think you can do that from inside RemixOS. If you already have empty space outside the RemixOS partition, you can just install to it - so then I don't understand you question.
Sent from my Nexus 9 using Tapatalk
hallergard said:
You will want to shrink the partition to be able to create and format a ntfs partition on the disk space not needed by RemixOS. Don't think you can do that from inside RemixOS. If you already have empty space outside the RemixOS partition, you can just install to it - so then I don't understand you question.
Sent from my Nexus 9 using Tapatalk
Click to expand...
Click to collapse
Yes, that's correct: I already shrunk this space and NTFS formatted it.
If I install a whatever other OS there on this partition - let's say WIN7 - how will I be able to select from where my computer will boot up when tuning it on?
If my primary partition has Remix and the secondary Win7 - at some point I will need to make a choice with which one I want to boot up my computer, right? My question is: how do I manage this dual boot choice?
Because my main boot on primary partition is currently Remix (and not Win).
OK, now understand that the question was about bootloaders. Assume you are using Legacy MBR rather than UEFI GPT. Windows prefers to be in the first partition on MBR - which you can achieve by moving the RemixOS partition with some cloning app like Clonezilla, or by using GParted in Linux. But it is possible to have Windows in the second position: I would use the Ranish Partition Manager, which allows you to change the position of the boot flag right after the Bios https://goo.gl/1bLYEE
Yep, that's it!
Many thanks for your ideas and the excellent resource site I discovered at the same time.
It happens I installed Remix OS on a laptop's FULL 500MB HD... and now I somehow regret the move.
Simply because this is too much wasted space for Android and there is a lot of empty space that I can use for something else.
Before installing I only changed in the BIOS the UEFI to legacy, and this, as far as I understand, should be MBR probably.
So, at this point, everything works fine. I could leave it as is.
But as I love running into complications and learn from them, I try to find something to do with some 300 MB disk space Android will never need for what I'm doing with it.
So, I much like your idea of changing the position of the boot flag but first I'll need to have a closer look at your video and better understand the process.
And also want to be sure my disk is MBR, if I find a way to securely verify that.
What steps would you suggest taking at this point?
And what option would you rather suggest - moving Remix OS or using Ranish?
Sounds like MBR if you do not have an EFI partition. I would go for Ranish, but I think you should consider wiping the drive, installing Windows 7 (suggest downloading the free ISO which includes SP1 from Microsoft) and reinstall RemixOS. Moving the drive is a quite tedious task. Then you can decide which bootmenu to use. I never learnt how to put RemixOS onto the Windows bootmenu (as I think Linux Grub2 is so much easier), but I am sure somebody can tell you howto. Or use the RemixOS bootmenu - by the way, which one are you using now Grub, Grub2 or something else? Or use Ranish!?
After double checking, it appears my partition is still UEFI...
Seems I was wrong with that.
Many thanks for your help and I think I'll follow your advice and start over again...
PS: I currently use GRUB2
hallergard said:
You might find some hints here https://goo.gl/N9S9zE
Click to expand...
Click to collapse
Very helpful page, thanks for this!
Is there a way to convert a disk from GPT to MBR without losing data?
NO. But are you sure that your disk is GPT? Windows diskmgmt.msc or in Linux GParted.
Yes, 100% sure.
Maybe you should leave it as GPT. Main advantage for you would be quicker boot times and probably not having to reinstall RemixOS. How many partitions do you have? Which one is RemixOS and which is EFI? Do you see the grub2 menu (or is delay 0 sek)?
Sent from my Nexus 9 using Tapatalk
A single partition for Remix, the primary one.
Grub2 has a delay set to 0 but I can see it when I press F8.
So you have a GPT disk but have made a Legacy install, not a UEFI install. If you now make UEFI installation of Windows 7 you will probably not see your grub2 menu (even if changing the time) so you would loose booting into RemixOS. What you can do then is to reinstall RemixOS as a uEFI install on top of your present without formatting if possible. Just the same before reinstalling copy over the big data.img file to the Win-7 partition, and if you had to format, you can copy it back. data.img holds all your app installations etc.
I'm not sure I well understand. My disk is GPT and my PC's BIOS is set to support Legacy disks.
Remix was initially installed on a ext4 partition on the whole HDD.
Where is that data.img file?
In any case, my idea is not Win7 but, for particular reasons, I want to install WinXP at main partition and Remix on dual boot.
What would you recommend without, if possible, having to re-install all Android settings, data and apps?
The data.img file resides in the root folder RemixOS of the Remix partition. You can not see it from inside a booted RemixOS, but you can see it if your mount the partition from outside, easiest from Linux (could be from Live Media), but also from an active Windows partition (if you install a third party driver such as Ext2Fsd.exe).
I am not sure if you can install Windows XP on a GPT disk at all, not even in Legacy mode. You can always try, and if you do succeed you will be able to install Ext2Fsd, and copy data.img to your XP partition as backup.
In Legacy mode Win-XP would overwrite the drive's mbr which means that you could boot Windows-XP but not RemixOS. So how to add RemixOS to your Windows boot menu? I was thinking that if you install EasyBCD you would be able to add RemixOS as a Linux partition - but I am not sure if that will work. Probably this choice will be greyed out when EasyBCD notices that you haved a GPT disk. I never learnt how one are supposed to add to the Windows boot menu, using "Bcdedit" - maybe someone else can teach you.
So with Win-XP my advice is to redo from scratch and install Win-XP on the first partition of the MBR drive and RemixOS on the second.
Many thanks for your patience and sorry if I'm taking too much of your time but I find your comments very constructive and might also be helpful for other members here..
I now realize that my previous message was not very clear, and probably also not complete:
I was meaning that I wanted to start over again, by formatting my disk in MBR (2 partitions) and by keeping all my existing Remix settings and apps as they are.
For the first point, I think it's quite straight forward: I just format my disk and create 2 new partitions.
Knowing that I'll install WinXP on the first one and Remix on the second, what formats would you recommend for those partitions?
Then, for restoring my existing settings and apps, I understand that I'll need to copy and later restore at same location the file data.img - possible using a live boot USB such as Ultimate Boot CD (I prefer Windows tools)? I tried with Ubuntu Live USB but was unable to gain access to root...
I found some Android apps that are doing backup/restore of settings and apps data but your idea with data.img sounds better.
Will this single file do somehow the same job and contain all Android-Remix settings and app data+settings?
Now, the missing part of the instructions is what will happen next, after WinXP is installed at the primary partition?
How to install Remix on the secondary one and how to dual boot when turning the PC on?
I would really appreciate if you may follow-up with this. Many thanks!
I recommend NTFS for XP and ext4 for Remix.
Let me explain about data.img v. data folder. Remix is a kind of Linux system and the data and system folders will not function on NTFS or FAT32. Therefore there is the alternative data.img, one big bundle file with all the content of the data folder inside, this to be used when installing with a Windows system using the installer exe file. To get the data folder instead of the data.img you have to 1.) create a USB stick from the ISO file - I use Rufus.exe in windows 2.) edit the kernel command line (hit TAB) and add "INSTALL=1" and 3.) install to an ext4 partition. I usually prepare and format to ext4 beforehand, so I answer No to format, but you should format here. https://youtu.be/e-4lgdjT-4Q (the root folder used to be called RemixOS-date, but is now only RemixOS).
I have assumed that you have been using the official windows installer and thus have the big data.img file. And you have to rescue it before you format the disk, by copying the file, or cloning the partition (making a partition image) - probably in either case to a USB drive - to later reuse after partitioning of the drive. I would be interested to hear if you actually can install Windows XP on your present second partition, because if you can do that, it would be the easiest way to rescue the data.img file. And if you fail to install XP no harm is done.
Code:
Now, the missing part of the instructions is what will happen next, after WinXP is installed at the primary partition?
How to install Remix on the secondary one and how to dual boot when turning the PC on?
I suggest you do Remix first. Either restore the partition image and proceed with the XP installation. Or install RemixOS, do not add "INSTALL=1" but format to ext4, Yes to grub (and grub2 if asked) and yes to system directory as read/write, and when asked to Run Android or Reboot, choose reboot. Rebooting will probably not work, but don't worry, just proceed with the XP installation.
In XP copy install Ext2Fsd and EasyBCD. Start Ext2fsd and give the second partition and drive letter, say D:. You will now be able to mount D: and copy over the data.img file (replace if you managed to boot) to the RemixOS folder (don't need to this in the cloning case). Run EasyBCD and third down Add New Entry, then second tab for Linux, add a name RemixOS and choose the drive and tap add entry. Go back to second down Edit Boot Menu and change Count down to something like 6 seconds and save. Now try rebooting, you should get a boot menu, chose RemixOS. And if it is not working, contact me so that we can edit out the Remix boot menu file.
I am a pensioner with plenty of free time, so I am only glad to help out.
Thanks for this.
OK for "NTFS for XP and ext4 for Remix" but I'm bit confused for the remaining...
I initially installed Remix by following this guide.
So yes, it's the official Win installer.
Now, for the remaining I still don't get it on how to backup this data.img file or folder... and also what the next steps you suggest are.
I don't well understand what you mean by working from within XP.
First I don't have XP installed yet because I really don't know how to install it on second partition and second if I ever was able to do this without touching my current Remix installation why should I backup/restore the data.img file? I mean that makes sense only if I have to start over again.
So, I'm really sorry but I'm lost at this point.
For the time being, I only have a Remix installation that works.
What should I do next precisely?