Related
I got a brand new BELL SGS2HDLTE yesterday model SGH757 and flashed CWM, everything was ok. This morning I decided I wanted to flash a samsung based ICS rom specifically this on here (http://forum.xda-developers.com/showthread.php?t=1569686). I booted into CWM Recovery, wipe/factory reset wiped cache and dalvik cache and installed the ROM. The setup show up and eventually said complete please reboot. I pressed reboot and the phone turned off and refuses to turn on anymore. The battery was at 44% when I was flashing, even if I plug the phone in via usb nothing happens. I've tried taking out the battery for a few second and putting it back in but nothing happens. I can't boot into CWM or DL mode either, its as if the phone is completely dead... Can someone tell me whats going on here??? I never had an issue like this on my old SGS.. Thanks in advance!
I'm guessing the infamous brick bug is responsible.
What was your configuration before flashing the new ROM?
What ROM and kernel?
Sent from a GT-I9100 having a mind of its own
TechnicallyImpaired said:
I got a brand new BELL SGS2HDLTE yesterday model SGH757 and flashed CWM, everything was ok. This morning I decided I wanted to flash a samsung based ICS rom specifically this on here (http://forum.xda-developers.com/showthread.php?t=1569686). I booted into CWM Recovery, wipe/factory reset wiped cache and dalvik cache and installed the ROM. The setup show up and eventually said complete please reboot. I pressed reboot and the phone turned off and refuses to turn on anymore. The battery was at 44% when I was flashing, even if I plug the phone in via usb nothing happens. I've tried taking out the battery for a few second and putting it back in but nothing happens. I can't boot into CWM or DL mode either, its as if the phone is completely dead... Can someone tell me whats going on here??? I never had an issue like this on my old SGS.. Thanks in advance!
Click to expand...
Click to collapse
I'm sorry bro but you might have suffered from the infamous super brick bug and your inability to read.
Solution:
Package the phone and send it to Samsung repair center
Swyped from Samsung Galaxy SII
TechnicallyImpaired said:
I got a brand new BELL SGS2HDLTE yesterday model SGH757 and flashed CWM, everything was ok. This morning I decided I wanted to flash a samsung based ICS rom specifically this on here (http://forum.xda-developers.com/showthread.php?t=1569686). I booted into CWM Recovery, wipe/factory reset wiped cache and dalvik cache and installed the ROM. The setup show up and eventually said complete please reboot. I pressed reboot and the phone turned off and refuses to turn on anymore. The battery was at 44% when I was flashing, even if I plug the phone in via usb nothing happens. I've tried taking out the battery for a few second and putting it back in but nothing happens. I can't boot into CWM or DL mode either, its as if the phone is completely dead... Can someone tell me whats going on here??? I never had an issue like this on my old SGS.. Thanks in advance!
Click to expand...
Click to collapse
No offense to the two responders above me, but you can ignore them.
The problem is that you attempted to flash a firmware not meant for your phone.
You yourself said you have an SGH-I757. Well, that ICS ROM you linked that you tried to flash is for the GT-i9100. The two models have different hardware, so firmwares, kernels, and ROMs are NOT compatible between them.
This probably screwed up the bootloader. Your only course of action at this point will probably be either JTag repair, or sending it to Samsung for repair.
ctomgee said:
No offense to the two responders above me, but you can ignore them.
The problem is that you attempted to flash a firmware not meant for your phone.
You yourself said you have an SGH-I757. Well, that ICS ROM you linked that you tried to flash is for the GT-i9100. The two models have different hardware, so firmwares, kernels, and ROMs are NOT compatible between them.
This probably screwed up the bootloader. Your only course of action at this point will probably be either JTag repair, or sending it to Samsung for repair.
Click to expand...
Click to collapse
Thanks for not being a douche bag in your response, much appreciated. Thanks for the info BTW, I just got myself a new one and I'll be more careful now. My biggest annoyance with native ICS on this phone is one is looks like gingerbread and two it comes with a tonne of bloatware that you can't remove without rooting ect. At this point should I flash CWM again since it installed successfully last time, root, and use that as a method to remove the unwanted bloatware. I'm so hesitant to flash this phone now, it seems it was much ease on my SGS1.
TechnicallyImpaired said:
Thanks for not being a douche bag in your response, much appreciated. Thanks for the info BTW, I just got myself a new one and I'll be more careful now. My biggest annoyance with native ICS on this phone is one is looks like gingerbread and two it comes with a tonne of bloatware that you can't remove without rooting ect. At this point should I flash CWM again since it installed successfully last time, root, and use that as a method to remove the unwanted bloatware. I'm so hesitant to flash this phone now, it seems it was much ease on my SGS1.
Click to expand...
Click to collapse
Just make sure you stick to flashing things meant for your model. Those things compatible with your device will be clearly labeled with the model number.
Problem is the SGH-i757 doesn't have its own forum, so stuff for it gets posted in here.
ctomgee said:
Just make sure you stick to flashing things meant for your model. Those things compatible with your device will be clearly labeled with the model number.
Problem is the SGH-i757 doesn't have its own forum, so stuff for it gets posted in here.
Click to expand...
Click to collapse
Yup, I've found a few but I also have a few questions maybe you can help me with. According to this thread ( http://forum.xda-developers.com/showthread.php?t=1756242) only stock ICS v 4.0.4 is effected by this superbrick. The SGS2 I hardbricked earlier today was updated to this version via keys to 4.0.4 before installing the custom ROM. So provided I stick to ROMS such as lets say the one here (http://forum.xda-developers.com/showthread.php?t=1740188) and avoid upgrading to 4.0.4 I should be able to CWM + Flash + Root correct? I should also be able to do the standard factory reset / wipe cache / wipe dalvik? I also used the eMMC Brickbug Check app in the first post I liked under how to AVOID the superbrick and it came up saying my chip was sane. Thanks in advance and also I pressed the thank you button
TechnicallyImpaired said:
Yup, I've found a few but I also have a few questions maybe you can help me with. According to this thread ( http://forum.xda-developers.com/showthread.php?t=1756242) only stock ICS v 4.0.4 is effected by this superbrick. The SGS2 I hardbricked earlier today was updated to this version via keys to 4.0.4 before installing the custom ROM. So provided I stick to ROMS such as lets say the one here (http://forum.xda-developers.com/showthread.php?t=1740188) and avoid upgrading to 4.0.4 I should be able to CWM + Flash + Root correct? I should also be able to do the standard factory reset / wipe cache / wipe dalvik? I also used the eMMC Brickbug Check app in the first post I liked under how to AVOID the superbrick and it came up saying my chip was sane. Thanks in advance and also I pressed the thank you button
Click to expand...
Click to collapse
The brick bug may not affect you at all. The most common Galaxy S2 affected is the i9100, which we have established is NOT your device. And you already used the app that said your chip is "sane", so it's confirmed you don't have to worry about it.
Again, you bricked the device by flashing a ROM meant for a different device. Had nothing to do with the brick bug.
ctomgee said:
The brick bug may not affect you at all. The most common Galaxy S2 affected is the i9100, which we have established is NOT your device. And you already used the app that said your chip is "sane", so it's confirmed you don't have to worry about it.
Again, you bricked the device by flashing a ROM meant for a different device. Had nothing to do with the brick bug.
Click to expand...
Click to collapse
Thanks, I wasn't aware flashing a rom not meant for your device can cause a hard brick to the point where you cant turn anything on and no buttons are responsive ect. Thanks for the help.
Hey guys, had a Note for a little while now and was running stock AT&T GB. I tried upgrading to ICS a couple of times using other threads in this forum, but I'd keep getting stuck in a boot loop and had to revert back to stock AT&T GB to recover my device per Da_G's method here: http://forum.xda-developers.com/showthread.php?t=1506330, and it worked fine.
However, I recently tried one more time to upgrade to ICS, failed and reverted back to stock AT&T GB per Da_G's method, and while my phone turns on, it has become sluggish to the point of being absolutely unusable. Screen touches work fine in some cases, and then take forever to register in the same spot later. The on screen keyboard cannot be invoked - it almost always hangs the phone. And the phone randomly reboots.
I did forget to wipe cache and dalvik cache the last time around while doing the install, and that probably caused this problem. But sine then I've wiped both caches and retried flashing, and also reinstalled a stock AT&T radio in case that was the problem, and also reset the flash counter per braway's methode here: http://forum.xda-developers.com/showthread.php?t=1569206, but to no avail...
My Note is pretty much useless at this time, so any light you guys can shed or any other tack you can suggest is going to help me immensely!
Thanks for the help!
Sid.
Wiping caches is not enough. You need to to a full data wipe/factory reset. At this point why not just flash your phone with Odin.
http://www.samsdroid.com/2012/07/i717uclf6-android-404-usa-at-stock-rom.html
This will fully wipe your phone and install the UCLF6 ICS ROM with matching radio.
Agoattamer said:
Wiping caches is not enough. You need to to a full data wipe/factory reset. At this point why not just flash your phone with Odin.
Click to expand...
Click to collapse
Sorry, I didn't mention - I DID do a factory wipe/data reset and I've been flashing the stock GB ROM via ODIN itself. But thanks for the link to the ICS ROM - I'll try installing this and report back.
Okay, I downloaded the UCLF6 ROM from the samsdroid site (took like 3 hours to download!), performed several factory data resets, cache wipes and dalvik cache wipes on my phone, and then flashed the ICS ROM via Odin. Odin showed "Passed", but the phone rebooted into recovery with a message "failed to mount /system" and "failed to mount /data". I then hit "reboot system now" and am stuck at boot loop. Booted back into recovery, got the same message about not being able to mount system and data. Hit "reboot system" again and back to boot loop...
What the heck am I doing wrong???
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
You do have an ATT i717 and not a canadian version? But I think your phone has other issues.
It is an AT&T SGH-i717. I've used it for 6 months now and it worked fine - it just never let me upgrade it to anything beyond GB... and now it is unusable even with GB.
Do you think it might be a hardware issue? Although, how could flashing and reflashing ROMs impact the hardware?
If the odin flashing did not straighten things out then I have to believe that there are other issues.
sid.asu said:
It is an AT&T SGH-i717. I've used it for 6 months now and it worked fine - it just never let me upgrade it to anything beyond GB... and now it is unusable even with GB.
Do you think it might be a hardware issue? Although, how could flashing and reflashing ROMs impact the hardware?
Click to expand...
Click to collapse
Did you try to flash ICS with Samsung Kies? If that doesn't work, your phone may have developed a hardware problem.
i have had the same issues as well, i am unsure if its me or what but everytime i have tried to flash a tmobile rom on my note which should work it slows down to a crawl i cannot even go through the setup process. I have tried via odin and through cwm touch. the next thing i flashed was t879uvlg3 modem and i was wondering if that was the issue and if so what modem should i flash that way i dont have to use kies for recovery cause man..........thats slow. I even made a nandroid backup and it was slow as well so if anyone has had this issue or any ideas please help me
oort cloud said:
Did you try to flash ICS with Samsung Kies? If that doesn't work, your phone may have developed a hardware problem.
Click to expand...
Click to collapse
My problem is that the phone does not stay on long enough for Kies to detect it - it keeps rebooting on GB. Well, guess it's cooked! Thanks for the help!
Wow! I need some help. I've acquired a Samsung Galaxy Note (i717, I believe) that shows all the signs of being healthy (appearance, touch screen, etc.) but persistently slows down at the ATT opening splash screen, begins to load Android, dies and reboots. Whatever variant rooted ROM I received it with (sluggish and unreliable) I have written over and now I can't get any farther than the Android settings screen. Therefore I do not know the exact version nor can I begin to set it up (wifi, etc.).
That's the 'presenting problem', so let me explain what I've done to this point (about 25 hrs. worth!). I have reloaded latest version of CWM (runs great) and then Padawan JB . . . same symptoms. I have loaded the ATT JB and ICS via the latest Odin successfully . . . with same symptoms. I have loaded TWRP (touch screen is snappy and works as it should) and Padawan JB again . . . with same symptoms. I have wiped caches before, after, and in between till I'm blue in the face, each time with the same symptoms. Most recently I have done a hard reset to native/factory settings . . . with no change! I've tried to scour the XDA (and any other sites) trouble shooting articles and seem to have come to a dead end.
Here's a couple things that I'm wondering: because I can't get deep enough into Android to check out the model number, could the phone be something other than an ATT model? At the top of the front face it simply says 'Samsung', not ATT at top and Samsung at bottom like my previous ATT Note. Right after boot I persistently get an ATT splash screen which would lead me to believe that it is ATT. Is there some other way to find model, say in TWRP? Do I need a phone specific version of Android? Second, everything seems to be working fine physically (i.e., no hardware problems). Could this thing have gotten a virus in an earlier life that's preventing the ROM from working right? I've not been able to get far enough to register it with my cell provider (second party, not ATT). Must you be up and running with the cell service to correctly load and use the ROM (wouldn't think so)? And if so, how without Android working? I've been using and playing with computers for 25 years, but I'm fairly new to the Android system (but learning fast!) Any help would sure be appreciated. I'd really like to resurrect this baby. I loved my first Note (till it fell off the car and disappeared).
pstrulm said:
Wow! I need some help. I've acquired a Samsung Galaxy Note (i717, I believe) that shows all the signs of being healthy (appearance, touch screen, etc.) but persistently slows down at the ATT opening splash screen, begins to load Android, dies and reboots. Whatever variant rooted ROM I received it with (sluggish and unreliable) I have written over and now I can't get any farther than the Android settings screen. Therefore I do not know the exact version nor can I begin to set it up (wifi, etc.).
That's the 'presenting problem', so let me explain what I've done to this point (about 25 hrs. worth!). I have reloaded latest version of CWM (runs great) and then Padawan JB . . . same symptoms. I have loaded the ATT JB and ICS via the latest Odin successfully . . . with same symptoms. I have loaded TWRP (touch screen is snappy and works as it should) and Padawan JB again . . . with same symptoms. I have wiped caches before, after, and in between till I'm blue in the face, each time with the same symptoms. Most recently I have done a hard reset to native/factory settings . . . with no change! I've tried to scour the XDA (and any other sites) trouble shooting articles and seem to have come to a dead end.
Here's a couple things that I'm wondering: because I can't get deep enough into Android to check out the model number, could the phone be something other than an ATT model? At the top of the front face it simply says 'Samsung', not ATT at top and Samsung at bottom like my previous ATT Note. Right after boot I persistently get an ATT splash screen which would lead me to believe that it is ATT. Is there some other way to find model, say in TWRP? Do I need a phone specific version of Android? Second, everything seems to be working fine physically (i.e., no hardware problems). Could this thing have gotten a virus in an earlier life that's preventing the ROM from working right? I've not been able to get far enough to register it with my cell provider (second party, not ATT). Must you be up and running with the cell service to correctly load and use the ROM (wouldn't think so)? And if so, how without Android working? I've been using and playing with computers for 25 years, but I'm fairly new to the Android system (but learning fast!) Any help would sure be appreciated. I'd really like to resurrect this baby. I loved my first Note (till it fell off the car and disappeared).
Click to expand...
Click to collapse
Well, if you keep flashing an AT&T based rom, then yes, you will get an AT&T boot animation simply because it's part of the rom you are flashing.
You said "you think" you have an I717, did you take the battery off and physically look at the sticker beneath it to see the model?
Try TWRP, go to WIPE, and WIPE everything, which means checking every checkbox. Then flash a stock rom with a fresh phone (no data, nothing at all)
You said you did CWM->Padawan.. these are two totally different roms, so you should always do a factory reset whenever flashing two totally different roms.
You can't just rely on the Android->settings to see the info since roms overwrite these stuff in build.prop so if you flash a wrong rom, wrong info will show up.
Here's my advice:
1. Flash TWRP
2. Wipe in TWRP, check every checkbox
3. Flash a stock i717 rom
4. Reboot
If that doesn't work, either hardware is bad or your phone isn't for the I717 roms.
Edit:
Question, have you ever come to a point that the phone boots successfuly at all? You did mention CM works great. But you can't go from CWM->TW Based rom without factory reset in between.
fbauto1 said:
Well, if you keep flashing an AT&T based rom, then yes, you will get an AT&T boot animation simply because it's part of the rom you are flashing.
You said "you think" you have an I717, did you take the battery off and physically look at the sticker beneath it to see the model?
Try TWRP, go to WIPE, and WIPE everything, which means checking every checkbox. Then flash a stock rom with a fresh phone (no data, nothing at all)
You said you did CWM->Padawan.. these are two totally different roms, so you should always do a factory reset whenever flashing two totally different roms.
You can't just rely on the Android->settings to see the info since roms overwrite these stuff in build.prop so if you flash a wrong rom, wrong info will show up.
Here's my advice:
1. Flash TWRP
2. Wipe in TWRP, check every checkbox
3. Flash a stock i717 rom
4. Reboot
If that doesn't work, either hardware is bad or your phone isn't for the I717 roms.
Edit:
Question, have you ever come to a point that the phone boots successfuly at all? You did mention CM works great. But you can't go from CWM->TW Based rom without factory
I would reflash cwm thru odin after that I would flash the latest TWRP 2.5. Then you can flash whatever. If padawan is givin u problems try something else like AOSP or AOKP. Padawan is TW based. JaimeD builds are pretty sweet.
sent from my GalaxySuperNote running OC Padawan JB
Click to expand...
Click to collapse
androidmechanic said:
fbauto1 said:
Well, if you keep flashing an AT&T based rom, then yes, you will get an AT&T boot animation simply because it's part of the rom you are flashing.
You said "you think" you have an I717, did you take the battery off and physically look at the sticker beneath it to see the model?
Try TWRP, go to WIPE, and WIPE everything, which means checking every checkbox. Then flash a stock rom with a fresh phone (no data, nothing at all)
You said you did CWM->Padawan.. these are two totally different roms, so you should always do a factory reset whenever flashing two totally different roms.
You can't just rely on the Android->settings to see the info since roms overwrite these stuff in build.prop so if you flash a wrong rom, wrong info will show up.
Here's my advice:
1. Flash TWRP
2. Wipe in TWRP, check every checkbox
3. Flash a stock i717 rom
4. Reboot
If that doesn't work, either hardware is bad or your phone isn't for the I717 roms.
Edit:
Question, have you ever come to a point that the phone boots successfuly at all? You did mention CM works great. But you can't go from CWM->TW Based rom without factory
I would reflash cwm thru odin after that I would flash the latest TWRP 2.5. Then you can flash whatever. If padawan is givin u problems try something else like AOSP or AOKP. Padawan is TW based. JaimeD builds are pretty sweet.
sent from my GalaxySuperNote running OC Padawan JB
Click to expand...
Click to collapse
If you want TWRP, flash TWRP. No need to flash CWM
Click to expand...
Click to collapse
AT&T Phones have a [logo}AT&T] on the top-center!!
But if you are in doubt, use kies to do a full recovery-restore [WILL ERASE EVERYTHING ON YOUR DEVICE].
See post #4 on this thread.
fbauto1 said:
androidmechanic said:
If you want TWRP, flash TWRP. No need to flash CWM
Click to expand...
Click to collapse
If you go thru Odin you would have cwm first. With the problems talked about, I would go back factory stock then re-root with Odin. Then thru cwm, flash twrp or whatever floats your boat.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
androidmechanic said:
If you go thru Odin you would have cwm first. With the problems talked about, I would go back factory stock then re-root with Odin. Then thru cwm, flash twrp or whatever floats your boat.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Nope. If you want TWRP, then flash TWRP via Odin. No need to go through CWM first. You can flash TWRP via Odin, you know that, right?
fbauto1 said:
Nope. If you want TWRP, then flash TWRP via Odin. No need to go through CWM first. You can flash TWRP via Odin, you know that, right?
Click to expand...
Click to collapse
No I didn't know that. All of the Odin programs that I dealt with flash cwm. Than for the Intel tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
fbauto1 said:
Nope. If you want TWRP, then flash TWRP via Odin. No need to go through CWM first. You can flash TWRP via Odin, you know that, right?
Click to expand...
Click to collapse
androidmechanic said:
No I didn't know that. All of the Odin programs that I dealt with flash cwm. Than for the Intel tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
you are both actually correct, however, I am looking at PSTRULM's stats. if he is anything like me when I started, the more simple and less complication involved in the process, the more he may understand.
ANDROIDMECHANIC is stating the most basic and beginner way to do this and understand simply. after doing this a few times as I did, the basic mechanics of the process will become more fluent.
then he can make his own decisions as to methods which might be easier for him, without confusing.
I am sure you both are a huge help to everyone and I thank members such as yourself for your efforts. ME, I prefer baby steps, cause I know I can really EFF things up if I get confused
androidmechanic said:
No I didn't know that. All of the Odin programs that I dealt with flash cwm. Than for the Intel tho. :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Just a reminder.. when flashing through Odin, make sure it's an ODIN-flashable tarball, i.e., you can't flash a recovery-type zip through Odin and vice versa.
Hey y'all.
So many threads ago I posted up on how to root a SGS2 I900P, which in the end I did no problems. The ONLY problem I encounted where I'd flash a different ROM and wanted to restore back to my factory loaded Orange UK rom, which when I restored it with no problems it just went through the 'boot loop' phase. I read up that this is caused due to a faulty emmc 'bricking bug' and luckily it was only "soft bricked".
Cut the long story short I managed to re-flash the Orange (UK) carrier firmware (after many USB cable changes and port swaps and fails) via Odin and retain my previously installed apps and so on and had to re-root. Is there a method or some sort of fix for the emmc bug issue for future wipes/restores ?
Something new I learnt in all that process too,
muffintastic said:
Hey y'all.
So many threads ago I posted up on how to root a SGS2 I900P, which in the end I did no problems. The ONLY problem I encounted where I'd flash a different ROM and wanted to restore back to my factory loaded Orange UK rom, which when I restored it with no problems it just went through the 'boot loop' phase. I read up that this is caused due to a faulty emmc 'bricking bug' and luckily it was only "soft bricked".
Cut the long story short I managed to re-flash the Orange (UK) carrier firmware (after many USB cable changes and port swaps and fails) via Odin and retain my previously installed apps and so on and had to re-root. Is there a method or some sort of fix for the emmc bug issue for future wipes/restores ?
Something new I learnt in all that process too,
Click to expand...
Click to collapse
To avoid brickbug is by flashing JB 4.1.2. (good alternative!)
But if you really like ICS then i suggest you move back to 4.0.3. There is no avoiding brickbug on 4.0.4.
If you have rooted it, you can check with 'Brickbug check' app on google play, to see if you have sane (or insane) chip (brickbug or not), cause most custom kernels and roms have found a solution to this bug, and use it on their roms/kernels. Which means on those you can safely wipe and restore etc.. (but check brickbug app first on google play)
Yep. Don't wipe a rooted phone running 4.0.4. And if you're really paranoid, don't even wipe a non-rooted phone running 4.0.4 (Entropy mentioned at least one case he knew of where someone borked their phone doing a wipe on a phone running 4.0.4 via stock Android recovery, tho it seems to be very rare).
The TL;DR is don't run rooted stock 4.0.4 if you mess with your phone in any way.
I know that's not a fix, but that's because there isn't one. Some chips aren't susceptible to the bug; there's an app floating around here somewhere/Google Play where you can check which chip you have (seems to be more that are susceptible).
Your 1st paragraph is a load of crap.Bootloop has nothing to do with "brickbug".More like by you not running kernel cleaning script,or not factory resetting before/after flashing a new rom.
As mentioned by others,just dont have 4.0.4 running on your phone.So you are still left with over 100 custom/stock roms to choose from........lol
Was the backup of JB? Or ICS? OP doesn't say. If it was JB, I'd be willing to bet that the bootloop was due to an attempt to restore the stock rom, but without restoring preload.
Sent from a galaxy far, far away
Hopper8 said:
Was the backup of JB? Or ICS? OP doesn't say. If it was JB, I'd be willing to bet that the bootloop was due to an attempt to restore the stock rom, but without restoring preload.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Im not sure Hopper.I am leaning towards the restore would be "cancelled" due to not being complete,rather than it succeeding leading to bootloop.
But hes not said.
And he cant get "factory" rom with a restore as it didnt come with cwm lol.
Sorry to clear things up.. I updated it to 4.1.2 via Kies many months ago. I used PhilZ method to root, no problem. Few months down the line since then I put LiquidSmooth 2.4 (few days ago) then restored a backup from PhilZ recovery and put 4.1.2 and everything back on no problem. Then restarted the phone and it when into a boot loop of the Orange and Samsung logo.
I'm not stupid as I've rooted my own SGS3 and Samsung Galaxy ACEs etc, Just forgotten to put that info in lol and yes I always use the Factory Reset to install a new rom.
And yes when I managed to get it restored from this so called boot loop (by putting 4.1.2 Orange UK firmeware back on via Odin) the EMMC brick bug is present as i've checked via an app via Google Play. My overall goal is to eliminate this problem or temp fix so I can put different roms on and if I don't like them recovery back to the latest restore without issues.
Are we on the same line now ?
And as we've said, you can't eliminate the problem. You can avoid the problem by not running 4.0.4 stock roms. It's really quite simple, but like a lot of people here you're trying to make it complex when there's no need to.
help me out here please
MistahBungle said:
And as we've said, you can't eliminate the problem. You can avoid the problem by not running 4.0.4 stock roms. It's really quite simple, but like a lot of people here you're trying to make it complex when there's no need to.
Click to expand...
Click to collapse
ok its a long story so i better get started... my friend had his phone rooted and installed a jelly bean version of Paranoid android and he wanted to put kitkat on it, he downloaded the cm11 latest nightly and told me to flash it i proceed to flash the phone but it failed and showed me "error status 7" so the phone couldnt get neither into the previous pa nor in the cm11... after some research and messing with the META INF stuff to sol the status 7 thing i found out that the problem was that he wasnt using a kitkat compatible recovery... i installled it and finally got to flash cm11.. that didnt came out as you may thought the phone showed it had -15246384352 % of battery made a freking glitch when the sreen rotated and it wouldnt recognize either of the sd cards (internal memory or external sd card) so i couldnt flash it again, wipe data/cache wouldnt solve the problem either... i turn into our ol friend odin and flashed stock JB wich worked perfectly except that i had the same issue with the memories... used philz to root the phone again, the try to format /system /data /emmc to check if that was the problem annnnd ta da the phone wont boot :silly: odin keeps failing to flash stock again and i dont jknow what to do....
sorry for the long post but i guess that you might need alll the info you could get for helping me...
thanks a lot
andreshbozo said:
ok its a long story so i better get started... my friend had his phone rooted and installed a jelly bean version of Paranoid android and he wanted to put kitkat on it, he downloaded the cm11 latest nightly and told me to flash it i proceed to flash the phone but it failed and showed me "error status 7" so the phone couldnt get neither into the previous pa nor in the cm11... after some research and messing with the META INF stuff to sol the status 7 thing i found out that the problem was that he wasnt using a kitkat compatible recovery... i installled it and finally got to flash cm11.. that didnt came out as you may thought the phone showed it had -15246384352 % of battery made a freking glitch when the sreen rotated and it wouldnt recognize either of the sd cards (internal memory or external sd card) so i couldnt flash it again, wipe data/cache wouldnt solve the problem either... i turn into our ol friend odin and flashed stock JB wich worked perfectly except that i had the same issue with the memories... used philz to root the phone again, the try to format /system /data /emmc to check if that was the problem annnnd ta da the phone wont boot :silly: odin keeps failing to flash stock again and i dont jknow what to do....
sorry for the long post but i guess that you might need alll the info you could get for helping me...
thanks a lot
Click to expand...
Click to collapse
Here is my situation.
I had 4.1.2 JB. Installed CM11 M8 and CWM_6.0.4.7(coming previously from Siyah) at the end of July. In the beginning of October my phone just shut down. That happened before on the same and previous rom so I wasn't worried. I turned it on and phone was in bootloop. That was strange because the last time that happened I installed Chainfire. So bootloop without any cause..that was strange. I tried making a backup before flashing the ROM. But I got an error. I can't remember but I can dig it somewhere if you want it. I tried then flashing recovery(bad idea) and Odin again reported an error. When I restarted phone I noticed that my Recovery mode was gone. Just gone and with no solution on how to restore it. I tried numerous methods OMAP drivers, heimdall, .pit file method but nothing. So I brought my sgs2 to the store where I bought it and they concluded that it was bad eMMC chip.
Now, your problem reminds me of mine because Odin wouldn't want to flash anything without an error(well, not exactly anything, I managed to flash some partition using Heimdall but it was not sufficient) but it doesn't have to be.
What version of cwm were you using?
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good: