[TUT] CM6 / CM7 / Kernel Compile Step by Step - Sony Ericsson XPERIA X10 Mini

1) You need the following:
-Python 2.4 -- 2.7, which you can download from python.org.
Or:
Code:
$ sudo add-apt-repository ppa:fkrull/deadsnakes
$ sudo apt-get update
$ sudo apt-get install python2.5
-JDK 6 if you wish to build Gingerbread or newer
or
-JDK 5 for Froyo or older.
You can download both from java.sun.com.
Or:
Code:
$ sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner"
$ sudo add-apt-repository "deb-src http://archive.canonical.com/ubuntu lucid partner"
$ sudo apt-get update
$ sudo apt-get install sun-java6-jdk-
Git 1.5.4 or newer. You can find it at git-scm.com.
Or:
Code:
$ sudo apt-get update
$ sudo apt-get upgrade
$ sudo apt-get install git-core-(optional) Valgrind, a tool that will help you find memory leaks, stack corruption, array bounds overflows, etc.
Download from valgrind.org.
Or:
Code:
$ sudo apt-get update
$ sudo apt-get upgrade
$ sudo apt-get install valgrind
2) Install required packages.
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev libc6-dev
lib32ncurses5-dev ia32-libs x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev
3) Download the repo:
Code:
$ mkdir ~/bin
$ PATH=~/bin:$PATH
$ curl http://android.git.kernel.org/repo > ~/bin/repo
$ chmod a+x ~/bin/repo6) Initialize the repo:
Code:
$ mkdir WORKING_DIRECTORY
$ cd WORKING_DIRECTORYF
or master branch:
Code:
$ repo init -u git://android.git.kernel.org/platform/manifest.git
For specific branch other than Gingerbread you would put in Donut, Eclair, Froyo, or Gingerbread where it currently says "gingerbread" without the parenthesis:
Code:
$ repo init -u git://android.git.kernel.org/platform/manifest.git -b gingerbread
4) When prompted, please configure Repo with your real name and email address. To use the Gerrit code-review tool, you will need an email address that is connected with a registered Google account. Make sure this is a live address at which you can receive messages. The name that you provide here will show up in attributions for your code submissions.
5) Gather the files:
Code:
$ repo sync
6) Verify and insert public key block:
Code:
$ gpg --import
Code:
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.4.2.2 (GNU/Linux)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=Wi5D
-----END PGP PUBLIC KEY BLOCK-----
7) After copying and pasting the public key block press Crtl+D to end the input.
8) Compiling:
Code:
$ source build/envsetup.sh
Or:
Code:
$ . build/envsetup.sh
9) Issue:
Code:
$ lunch
10) Pick your poison.
11) Now issue:
Code:
$ make
12) Now just cross your fingers and hope it all works out!
13) Issue this command to create a flashable zip:
Code:
$ make otapackage
Or if you want to test on an emulator:
Code:
$ emulator
15) If all went well you can either run your build on an emulator or flash it on a device.
Code:
Please note that you have already selected your build target with lunch, and it is unlikely at best to run on a different target than it was built for.
~How To Add A Device To The List~
1) Find the github for your device you wish to add. (For me it is the HTC Hero CDMA)
2) Now navigate to the location you are going clone the device tree to:
Code:
$ cd WORKING_DIRECTORY/device/htc3) Clone the github device tree from remote to local: (The heroc would be whatever you want that folder to be named so make sure it is whatever standard name would be for your device, example: Nexus One [Passion], Nexus S [Crespo], Motorola Droid [Sholes], HTC Incredible [Inc], etc.)
Code:
git clone git://github.com/wjb/android_device_htc_heroc.git -b gingerbread heroc
3) Now navigate into the folder:
Code:
$ cd heroc
4) Setup Device Specific Make Files:
Code:
$ ./setup-makefiles.sh
5) Prepare To Copy Device Proprietary Files To Vendor Tree:
Code:
$ cd prebuilt
6) Copy Proprietary Files To Vendor Tree:
Code:
$ cp -r proprietary WORKING_DIRECTORY/vendor/htc/heroc
7) Navigate back to your home directory for building:
Code:
$ cd ~/WORKING_DIRECTORY
8) Prepare To Compile:
Code:
$ source build/envsetup.sh
Or:
Code:
$ . build/envsetup.sh
9) Get your list of devices:
Code:
$ lunch
10) Pick your poison.
11) Now compile:
Code:
$ make
Or if you want a flashable zip:
Code:
$ make otapackage
Compiling kernel:
You will need sdk / ndk packages from Google:
mkdir KERNEL_DIRECTORY
cd to KERNEL_DIRECTORY
Code:
ARCH=arm CROSS_COMPILE=???/SDK/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi- make semc_?????_defconfig
or
Unpack config.gz to KERNEL_DIRECTORY as .config from kernel.sin --- how? Simple use hexeditor and search two times for gzip magic 1F8B08 cut all before that and you have config.gz
then
ARCH=arm CROSS_COMPILE=???/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi- make
Compiling invidual packages:
Code:
make [ module name ]

---

Guess what bro.. finally got it! (kernel thingy)

---

Chum, you are legend. This is awesome.

---

Good work.But can you explain this for compile NobodyAtall sources? Thanks.