Hi,
I'm having trouble flashing cwm and having it "stick." Every time I flash either tenfar's or the official cwm, I can boot into it once. Then, when i try to boot into it any time afterwards, the stock recovery is restored. Can someone help me figure out the problem please?
There isn't enough information to help you.
Please reply with the current ROM you're running and what you've done to get to that ROM (e.g., unlock, etc.). Also include where you got CWM.
You may also want to read this - 'How to ask a question' or 'How to Ask Questions The Smart Way'
Remove install_recovery.sh located in your /system/etc/ ,so that the recovery will not be overwrite to stock one.
Sent from my MB860 using XDA App
Related
Hi all,
I rooted my SGS2 (KE7) with CF-Root ages ago and haven't done much since then, aside from take regular backups.
Looking at the Cyanogenmod stuff, I fancy giving it a go. All the guides talk about using the kernel at http://forum.xda-developers.com/showthread.php?t=1118693 .
Does anyone know if I can flash the cyanogenmod ROM using the recovery mode I have with CF-Root, or if I need to get use the kernel from the above patch first?
This morning I tried installing the kernel (from the CF-Root CWM), when my phone rebooted, the touchscreen worked on the unlock page but not once I unlocked (I use LauncherPro as my launcher). Rebooting into recovery mode didn't work (the phone just booted normally) so I reflashed CF-Root but still had the same problem however I could boot into recovery mode and restore this morning's backup.
Now, the phone boots (with the warning triangle, expected) but there is no response after I unlock for a minute or so. Setting the stock launcher back works but I'm confused about why this should happen and what I should do next.
Does anyone know why my non-stock launcher is now being non-responsive for the first minute after boot / what I can do to get it back?
Am I able to install cyanogen with CF-root, or do I need to use the kernel in the above link? and if so, do I need to do anything other than just flash and if not why didn't the phone boot into recovery when I tried it earlier?
Any suggestions gratefully received!
-Jeff
The cf-root kernel is all you need to install cm7.
peachpuff said:
The cf-root kernel is all you need to install cm7.
Click to expand...
Click to collapse
This is correct. However, after you install the cm7 .zip the first time, it will have only installed the kernel for cyanogen mod. So you will then need to boot back into recovery with 3 button mode and run the zip install again from there. You will then have CM7.
Electroz said:
This is correct. However, after you install the cm7 .zip the first time, it will have only installed the kernel for cyanogen mod. So you will then need to boot back into recovery with 3 button mode and run the zip install again from there. You will then have CM7.
Click to expand...
Click to collapse
Don't quite understand this. I've got the cm_galaxys2_full-39.zip (100MB), I was going to put this on the SD card, boot into recovery mode and install from there. Are you saying I need to do this same process twice? (and if so, why does it only install the kernel the first time when it is the complete zip file?)
Cheers,
-Jeff
CF-root => Cyanogen mod
Hello everybody,
There are a few threads that discuss this question, but they all draw a different conclusion.
This one for instance : http://forum.xda-developers.com/showthread.php?t=1367933 (or if the link is broken, search for : How can i use cf-root kernel for cm7?).
In the thread above they claim that CF-root is not compatible with CM7, however in this very thread there is said that when installing the .zip file twice, it should work just fine. As i'd like to install CM7 on my CF-rooted S2, i have to know for sure:
Is there a way to install CM7 on a CF-rooted device?
Many thanks
Rom manager doesnt work with cf root, so to flash cm7 download the zip, boot into recovery, and flash the zip twice, and it will work.
Make sure you wipe data and cache, and take backups before you do.
Sent from my GT-I9100 using Tapatalk
Ok, i'll give it a go .
Thanks for the quick response, it is much appreciated!
I am trying to create a Custom ROM. After installing my Custom ROM, i would like to start the CWM Recovery on first boot.
Please let me know how to do it.
Thanks in advance.
Better would be if we could get an option everytime we switch on our phone asskinng us to whether boot in cwm or normally. Would be much easier to do something like wiping data, switching rom without booting the device two or three times. Thanks in adavance for help
I am now using G3MOD Lite. It works fine.
Check link
forum.xda-developers.com/showthread.php?t=1163812
Hello all I am new to this whole rooting process... I am not afraid to admit it as we all were once new at what we are doing at some point. I need help creating a nandroid back up on my atrix. O have successfully unlocked the boot loader and rooted my phone. I performed a backup using cwm through the boot screen and then I proceeded to wipe all my data and install a new rom when to my surprise it got stuck on the boot load screen for 30minites before I pulled the battery and tried restoring to my backup that I made with cwm.. it appears that the backup only successfully installed the boatload.img file and none of the other. Img files therefore once rebooted my phone would stay stuck at the boatload screen... I finally wiped everything and found a gingerbread 2.3.4 version 4.5 beta and copied it to my external sd card and installed it through cwm choosing the zip file to install and rebooting. Now I am back up and running but I do obviously not know how to make a nandroid backup so if I decide to tinker around with my phone again I will not have the same problem as before. Any help would be greatly appreciated... I am sorry this is so long bit if someone helps me I would rather they know the whole story then just portions of it. Thanks everyone who reads this and replies!!!
Sent from my MB860 using XDA App
Mphill46 said:
Hello all I am new to this whole rooting process... I am not afraid to admit it as we all were once new at what we are doing at some point. I need help creating a nandroid back up on my atrix. O have successfully unlocked the boot loader and rooted my phone. I performed a backup using cwm through the boot screen and then I proceeded to wipe all my data and install a new rom when to my surprise it got stuck on the boot load screen for 30minites before I pulled the battery and tried restoring to my backup that I made with cwm.. it appears that the backup only successfully installed the boatload.img file and none of the other. Img files therefore once rebooted my phone would stay stuck at the boatload screen... I finally wiped everything and found a gingerbread 2.3.4 version 4.5 beta and copied it to my external sd card and installed it through cwm choosing the zip file to install and rebooting. Now I am back up and running but I do obviously not know how to make a nandroid backup so if I decide to tinker around with my phone again I will not have the same problem as before. Any help would be greatly appreciated... I am sorry this is so long bit if someone helps me I would rather they know the whole story then just portions of it. Thanks everyone who reads this and replies!!!
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
try RomRacer's CWM Recovery in the development forum instead.
Thanks I will look into that! Thanks for your response.
Sent from my MB860 using XDA App
Looked into rom racer's forum page still confused
Hello again, I have looked into the forum for "romracer" and there is still quite a bit of confusion on my side (noob). I am already nervous about flashing things to my phone since my last stuck in boot loading screen. My current version of cwm is whatever came with option number 2 on the automatic unlock file that unlocked my bootloader and also provided root access. I believe it is called "Tenfar CWM". I want to be able to make a successful nandroid backup and I am understanding that I need to flash the latest version of CWM for atrix. I am confused about how I go about flashing that onto my phone safely. I am sorry I am such a noob, but I want to understand how to get the latest version of CWM for atrix onto my phone... There are so many links to different things on the developer for CWM forum page that my mind is spinning out of control. Any help on where to download all the necessary files to perform this flash and how to flash my phone with the latest version of CWM for atrix 4G would be greatly appreciated. Thanks for being understanding and helping me through this process that seems overwhelming for a noob like me.
Thanks,
A fellow Atrix 4G owner who switched from iPhone to have the freedom to change what I want
Mphill46 said:
Hello again, I have looked into the forum for "romracer" and there is still quite a bit of confusion on my side (noob). I am already nervous about flashing things to my phone since my last stuck in boot loading screen. My current version of cwm is whatever came with option number 2 on the automatic unlock file that unlocked my bootloader and also provided root access. I believe it is called "Tenfar CWM". I want to be able to make a successful nandroid backup and I am understanding that I need to flash the latest version of CWM for atrix. I am confused about how I go about flashing that onto my phone safely. I am sorry I am such a noob, but I want to understand how to get the latest version of CWM for atrix onto my phone... There are so many links to different things on the developer for CWM forum page that my mind is spinning out of control. Any help on where to download all the necessary files to perform this flash and how to flash my phone with the latest version of CWM for atrix 4G would be greatly appreciated. Thanks for being understanding and helping me through this process that seems overwhelming for a noob like me.
Thanks,
A fellow Atrix 4G owner who switched from iPhone to have the freedom to change what I want
Click to expand...
Click to collapse
1) Go to /system/etc. and delete "install-recovery.sh". This can be done with Root Explorer, available from the market. If it's not there, then don't worry about it.
2) Download which every color of Rom Racer's CWM you want to your pc (same folder as fastboot files).
3) Boot into fastboot mode and enter fastboot mode.
4) Connect phone to pc, and open command prompt from fastboot folder (shift + right click -> open command window here).
5) Enter fastboot commands from Rom Racer's OP.
6) Enter "fastboot reboot" to reboot phone.
7) Boot into recovery and make sure it worked
*If you still see Tenfar's recovery app on your phone, delete it like you do any other app.
OR
1) Delete Tenfar's Recovery app.
2) Go to /system/etc. and delete "install-recovery.sh". This can be done with Root Explorer, available from the market. If it's not there, then don't worry about it.
3) Download ROM Manager from the market (free)
4) Install the CWM Recovery for the Atrix via the ROM Manager App.
5) Use this CWM Recovery
or proceed to install ROM Racer's CWM Recovery...
6) Download ROM Racer's CWM and put it on your internal SD card (/sd-card).
7) Open ROM Manger App
8) Select install ROM from .zip (or something like that - one of the main options).
9) Select the .zip you put there, an uncheck the options (no need to wipe anything).
10) Phone will reboot, install the .zip, and reboot again.
11) Should have ROM Racer's version on the phone now, and be able to enter recovery via the ROM Manager App.
Thank you so much... I will try that once I have some time to dedicate strictly to this...
Sent from my MB860 using XDA App
Hello everyone,
I'm just about to go out of my mind, haha. I've successfully rooted my phone and I am interested in installing a new, custom ROM. However, I want to be 100% sure that I am not leading myself into the path of bricking. I have a couple questions that I think are basic enough, but haven't found an answer to anywhere online.
1.) Do I need a specific kernel and/or firmware in order to install a custom ROM?
2.) These are my specs for my phone
Android 2.3.3
Baseband: I9100DXKI1
Kernel: I9100DXKI2
Looking at my specs, will I be able to install this rom: http://forum.xda-developers.com/showthread.php?t=1198334 ?
Will any other ROM work for my phone? Now that it is rooted, am I freely able to install any ROM using clockworkmod or odin without having to change the kernels?
I'm very new to this and I'm hoping somoone can help me out with this.
Thanks a ton in advance!
Just rooting is not enough to install custom rom. You need to install clockworkmod recovery either through rom manager or flash a custom kernel which has CWM.
You can flash any kernel compatible with your device (for example, you cannot flash I9100G kernel/firmware on I9100 model).
You can get a lot of information here at xda. All the developers here are very friendly and co-operative.
You're good to go. Backup apps and some data using Titanium backup and/or My Backup Pro or something like those. Then boot into recovery, make a nandroid backup (can be found in the recovery menu), and flash the rom of your choice. You can flash any rom you like, just don't forget to wipe! This is also an option in recovery, wipe data/factory reset. You can also wipe dalvik-cache (found under 'advanced'). Have fun flashing!
Thanks for filling me in guys. I do have CWM installed on the phone, so I'll back up and try to flash. We'll see if I don't brick the phone somehow, haha.
roboedar said:
Thanks for filling me in guys. I do have CWM installed on the phone, so I'll back up and try to flash. We'll see if I don't brick the phone somehow, haha.
Click to expand...
Click to collapse
Well obviously you wont, all you can do with flashing a wrong rom is getting boot loop, you can always restore your previous rom via nandroid backup. Happy flashing
Ok guys heres the deal....i recently got a samsung fascinate from my sister cause I couldnt mod my inc any more. ok so....i got the phone rooted. i have su perm. i downloaded rom manager and installed it. now heres my problem. i can preform a backup no problem, but when i go to restore that backup it boots into clockwordmod and begins and then get an error about erasing boot img. or something like that. can tell exactly if i get some help from this. also cant install custom roms like i can with my incredible. i know it can be done cause i see roms and all for this phone. can someone please please help me.
Thats because cwm3 will not perform nandroid restores on stock roms. You need to flash cwm 2.5.1.x red recovery. Its the best recovery imo for any bml(touchwiz) rom. Go over to my guide in general section and you cand find cwm 2.5 in section 2&5. Oh and ditch rom manager...manually install cwm via odin!
If you're coming from an incredible, also keep in mind you don't have to be rooted to flash roms either, you just have to have a custom recovery. There aren't really any modifications like rooting procedures, S-OFF, etc, required for rom flashing, just odin a recovery and flash your selected rom.