Related
Yes, the Bootloader have been successfully bypassed!!!!!!.
I know that, like me, a lot of people is goin to try this, so I believe it is a good idea to have a thread to give feedback, report bugs and post dev-related information without getting the the original thread SPAMMED,
Since future releases would be done through recognised devs, this thread would be ONLY FOR THE ALFA RELEASE MADE BY Z ON MARCH 31.
This is the original message from Z:
========================================================================================================================
Ok, here we go. It wasn't the April Fool thingy
The bootloader has been bypassed using the kexec/miniloader method
We are able to boot custom kernels now!
I'll keep it short as I'm quite busy today... I haven't had much luck with disabling MPU nor resetting a MCPU - it failed no matter what I did. Same thing with porting shutdown procedures into miniloader. But when I found out that the custom kernel doesn't reboot on baseband 52, I switched to the .504 sources and restarted the work. Using the debugfs tips by Goroh, I realised some stuff I'd rather to keep in between the developers here... And then *poof* - the green USB led appeared and I knew I was getting there!
Anyway... this is the first release of the fully working custom kernel (flashable via xRecovery). I haven't had much time to work on it so it's kind of proof-of-concept. Tested for 48h without any problem (not even a reboot).
FreeKernel-alpha1:
http://www.mediafire.com/?d8v914keiqsmc3n
This is the alpha version of custom 2.6.29 kernel based on the SE sources. I do not plan to work on this release anymore - it is just for testing purpose. From today on I'll start to port SE stuff to the latest (GBread) kernel.
Changes:
- removed 32 fps cap
- implemented netfilter (Droid wall, native USB/wifi tethering etc.)
- undervolted to 0.950mV to save battery
- don't remember what else I did, I bet something nasty
- super ugly boot logo!
Requirements:
- baseband .52 + the relevant kernel
- clean 2.1 ROM, compatibile with .52 baseband (e.g. .504)
- working xRecovery
Please note I am not responsible for any damage this software may cause to your device! Use it at your own risk!
There is absolutely no support for this alpha release!
Big thanks to (no particular order): Goroh_kun, Jerpelea, Bin4ry, Maxrfon, Biktor_gj and everybody else who contributed into X10 custom kernel development.
At first the relevant kernel patches/sources will be delivered to the recognised X10 developers. Later on everything will be released as it's obviously Open Sourced.
Please refrain from posting comments in this thread - it's for developers only. Spamming will only make our task harder to accomplish!
Cheers,
z
========================================================================================================================
Please note that I'm not a dev, and neither me or Z would be responsible for what you do with your phone!!!
Report only feedback useful for the devs
=================================================================================================================
Edit April 5:
Z posted a in-call volume fix for its alpha kernel. Please take the time to make a usefull post with feedback about it. It will be better if you include a logcat like or a detailed report.
This is the original post:
zdzihu said:
Here's the kernel image with possible in-call volume fix. Howto:
- install the alpha kernel package
- copy this boot.img into /system/kernel
Please let me know whether the call volume is fixed for you (in the "comments/feedback" threads.)
http://www.mediafire.com/?uxc0ht1tyvl0qdx
This is for testers/developers only!
Code:
--- q6audio.c~ 2011-04-05 08:29:25.653333350 +0200
+++ q6audio.c 2011-04-05 08:29:25.696666684 +0200
@@ -54,7 +54,9 @@
static struct q6_hw_info q6_audio_hw[Q6_HW_COUNT] = {
[Q6_HW_HANDSET] = {
.min_gain = -900,
- .max_gain = 600,
+ //.max_gain = 600,
+ // zdzihu: let's get loud!
+ .max_gain = 1199,
},
[Q6_HW_HEADSET] = {
.min_gain = -1900,
Cheers,
z
Click to expand...
Click to collapse
Eternity 2 003a confirmed to work with baseband .52
only one reboot while I played Angry Birds Rio, other than that I made two calls with success, wifi is ok and the uptime is around 2 and a half hour
of course, DT works
if we want to test it, how to revert to original kernel?
minjiet said:
if we want to test it, how to revert to original kernel?
Click to expand...
Click to collapse
restore a backup from xrecovery
WOW
You don´t need to downgrade to the original Kernel
After installing the custom Kernel my Xperia flys!!!!! Everything is soooo much smooth and you can see with Quadrant that fps rising over 30
Now we have to wait for the newest Kernel!
@Z: Make the next Kernel overclockable pls!!!
Whitecookie said:
You don´t need to downgrade to the original Kernel
After installing the custom Kernel my Xperia flys!!!!! Everything is soooo much smooth and you can see with Quadrant that fps rising over 30
Now we have to wait for the newest Kernel!
@Z: Make the next Kernel overclockable pls!!!
Click to expand...
Click to collapse
quadrant fps raising over 30, mean increase in 3D score?
Just out of interest, what is visual performance like without the frame cap?
Sent from my X10i using XDA App
Yes
Normally it has to improve the 3D performance.... but if i play Angry Birds it feels laggy. If i use Launcher Pro or srolling down pages it feels like..... Don´t know how to say
Man I don't understand. I downloaded the kernel but my frames are worse now
Sent from my X10a using XDA Premium App
Lion3494 said:
Man I don't understand. I downloaded the kernel but my frames are worse now
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
Flash JIT V2 on your FW... it has to improve the performance
i agree. everything about my phone since installing this kernel makes my x10 feel and run like crap. fps suck. 2.1 rom again? what the F? this is very dissapointing.. kudos to the devs for bypassing but get real. what changes really are there? when i have overclock and fps real does go past the 33 tops that i reach on quadrant then ill try again. especially if i dont have to use a crap 2.1 se rom.
Edit: ok i have it working. this is what is up with it. fps only changes from 30 fps cap on the quadrant test when you have the rotating planets. i pegged at damn near 50fps. unfortunately this is the only one where fps were high. as i normally run z's b4 with data2sd. i peg on the same one at 33fps. being that we are only able to run this on a 2.1 se rom as of the moment. quadrant scores are going to suck. i normally run 2700 on b4 with data2sd.
As for overclocking.... not at the moment. yes it is a custom kernel but overclocking is not part of this kernel. with one is compiled to allow overclocking and the use of other basebands and builds such as .54 .55 .58, we will still be stuck with a max of 998 on our cpu. but once it is available with other builds and overclocking is allowed. we should easily be able to push close to 3000 on quadrant.
I had it installed before. Do I install it again?
Sent from my X10a using XDA Premium App
Lion3494 said:
Man I don't understand. I downloaded the kernel but my frames are worse now
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
r u using the compatibles baseband???
Yeah im going back to my other rom on 2.2
Sent from my X10a using XDA Premium App
Yes I am on bb 52
Sent from my X10a using XDA Premium App
I fear one of u will brick your phone .
And z said he will b working on new one. So I feel its pointless to even test this? And he knows we are not developers so I doubt he will even bother reading this
Sent from my X10i using XDA Premium App
anyone make a video for it and show how to works compared to 30fps cap?
common guys ,haven't u read it ,it works only with 2.1 and baseband .52 so u cant try it on foryo custom roms it won't work perfectly
SErooted said:
i agree. everything about my phone since installing this kernel makes my x10 feel and run like crap. fps suck. 2.1 rom again? what the F? this is very dissapointing.. kudos to the devs for bypassing but get real. what changes really are there? when i have overclock and fps real does go past the 33 tops that i reach on quadrant then ill try again. especially if i dont have to use a crap 2.1 se rom.
Click to expand...
Click to collapse
Wow.
You sound soooo ungrateful!
This was only a test kernal by Zdzihu, obviously, he's starting small, only people who know what they're doing should flash this.
It may seem like a "downgrade" for all you casual users, but for the devs this is a giant leap forwards.
Here is the quick guide for all u guys having trouble..
I did it this way and i am getting upto 55 fps on quadrant.
1. flash your phone using the latest flash tool with X10i generic .504
here is the link http://forum.xda-developers.com/showthread.php?t=920746
2. Switch on the phone and finish with the setup and turn it off.
3. Now again flash your phone with the 2.0.52 baseband which replaces the current
Kernel only. Here is the link http://forum.xda-developers.com/showthread.php?t=960527
4. Switch on your phone, finish with the setup and root it with flash tool
5. Download Z's Xrecovery and install it with market's busybox, here is the link for Xrecovery http://forum.xda-developers.com/showthread.php?t=859571
6. Reboot your phone and in Xrec flash the kernel provided by Z (Freekernel)
7. Switch on the phone and enjoy fast and responsive Freex10...
hello every body....
this is first time to me in this forum and i'm new on android world
please i need your help
i have an official update 2.1 update1 at my mobile and i dont need any rom coz i tried many roms there is all have a bug i prefer to be at this firmware.
but the point that i need to have multi touch i cant play angrybird and what about overclock can i get it how ?!?!
please i need help with links and files
I feel so sad when i read things like this.........
freedompals said:
hello every body....
this is first time to me in this forum and i'm new on android world
please i need your help
i have an official update 2.1 update1 at my mobile and i dont need any rom coz i tried many roms there is all have a bug i prefer to be at this firmware.
but the point that i need to have multi touch i cant play angrybird and what about overclock can i get it how ?!?!
please i need help with links and files
Click to expand...
Click to collapse
Next time use search functions on forums before posting like these.
There are threads regarding multitouch development. As of now we don't have this feature yet.
When playing angry birds, I don't use two fingers to play. I can play with single touch with no problems though lol.
Overclocking, use ROMs developed neither by owain94, slade 87, D4rKn3sSyS. Not all custom ROMs have major bugs. The said developers created custom ROMs we can use daily.
or once again use the search function to search on how you can overclock your phone without installing custom ROMs.
Lastly, don't forget those people who created ROMs that you will be using
fictionworld said:
Next time use search functions on forums before posting like these.
There are threads regarding multitouch development. As of now we don't have this feature yet.
When playing angry birds, I don't use two fingers to play. I can play with single touch with no problems though lol.
Overclocking, use ROMs developed neither by owain94, slade 87, D4rKn3sSyS. Not all custom ROMs have major bugs. The said developers created custom ROMs we can use daily.
or once again use the search function to search on how you can overclock your phone without installing custom ROMs.
Lastly, don't forget those people who created ROMs that you will be using
Click to expand...
Click to collapse
sorry sir I did not mean to offend Programmer....i respect him
but really i tried a lot of rom's through i follow the instruction but i faced a lot of bugs and so many restart issue
about the post i wrote it coz there is many subject and you will lost in forum
sorry again
freedompals said:
sorry sir I did not mean to offend Programmer....i respect him
but really i tried a lot of rom's through i follow the instruction but i faced a lot of bugs and so many restart issue
about the post i wrote it coz there is many subject and you will lost in forum
sorry again
Click to expand...
Click to collapse
I'm just telling no need to say sorry lol. I'm just a regular user of their custom ROM too lol. XD
Hmm. Before we customize our ROM we need to know first what's the requirements. What ROMS did you use? And what are your kernel version, android version and build number? You said you're on stock ROMs at the moment right? please do correct me if I'm wrong. xD
ok man thats clear
i followed the instruction every once i install rom i tried
MiniCM6-1.0.0
xCyanogenMini 7
and others i didnt remeber
but alway have so many reboots
i have now
2.1 update 1
m76xx-tsncjolym-53404015
2.1.1.a.0.6
hmm call me noob but uhh, your phone's a mini pro?
MiniCM6-1.0.0
I think the problem is that you are using ROMs which is only made for xperia mini. That's why you're getting a lot of bugs.
Please do correct me if I'm wrong.
Currently I use slades87 work, and its xCyanogen6 for mini pro. It works perfectly for me. Why won't you try that? The infos you gave me suited it actually.
no sir my phone is x10 mini not pro
what's are the exact problems that you are experiencing?
did you do a factory reset before installing the rom?
-factory reset
-wipe stats wipe dalvik-cache
-wipe cache
then try installing custom rom.
do you still have xrecovery installed?
open the zip file of your rom you want to flash with winrar
browse to /system/lib/modules/
highlight x8oc.ko and hit delete
copy zip to your sd again
reflash
be happy
Why need to do this??
Can I do in running room?
slade87 said:
open the zip file of your rom you want to flash with winrar
browse to /system/lib/modules/
highlight x8oc.ko and hit delete
copy zip to your sd again
reflash
be happy
Click to expand...
Click to collapse
axpira said:
Why need to do this??
Can I do in running room?
Click to expand...
Click to collapse
This is only if you have reboots, cuz if you have still reboots on froyo rom, you SHOULD delete overclock module !
x8oc.ko - this module can overclocks Your phone. Overclocking means that it's CPU runs faster than it is for. It is working for someones and do not work for others (!). Could bring dangerous unstableness, reboots.
Wise advice to delete it, but I can't understand why overclock a modROM by default? (if this is the case)
.x.x.x.Peria said:
x8oc.ko - this module can overclocks Your phone. Overclocking means that it's CPU runs faster than it is for. It is working for someones and do not work for others (!). Could bring dangerous unstableness, reboots.
Wise advice to delete it, but I can't understand why overclock a modROM by default? (if this is the case)
Click to expand...
Click to collapse
i've installed a few roms for my mini pro, they came with the max clock at 600mhz, only the overclocked version of slade87 MiniCM came with the max clock at 710 mhz. i don't know any rom for mini (not pro), but i think it should be similar
Hi, I recently installed CM7 Rom with BB 54 which is packed on the same zip and is working great besides know issues as camcorder and cammera itself and a couple of things...
For example:
- Im having issues with google googles... if I want to take a pic the image will be all distortionated...
- Cant use the dots at the bottom (right and left) to move arround my "desktop" cuz AWD loader will crash.
Well main issue Is the GPS here... I cant make t work. I have radio ok, Wifi ok, etc. but google earth is taking forever to find me...
I have tryed some patch's that I found crawling on the forums and the CM7 thread itself but im not able to find answers so far... is it possible to have CM7 + BB 67?
Can anyone lead me to the right forum / answer?
P.D. Yes... i have searched in these forums / yes I have used google B4 posting this ^^
are you also using a diffrent custom kernel since the default one is made for cm7 is baseband 52>
Sent from my X10i using XDA App
rtblittlebrown said:
are you also using a diffrent custom kernel since the default one is made for cm7 is baseband 52>
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Im a douche sometimes... I forgot to post that info, here it is:
- Baseband : 2.0.52
- Kernel : 2.6.29-zdzihu-mod3.60 [email protected]#1
- Mod: CyanogenMod-7.0.3-X10-J02
- Comp: GRI40
-------------------------------------------------------------------------
Yeah, I have tryed Freekernel and thanks to your question im going to try Zkernel right now... I'll let ya know what happend ^^
At the end I just was ofuscated due the constant failure and the new kernel & BB are working like a charm, GPS troubles are solved now..
Now im having some other issues LMFAO... phone is constantly rebooting and such... im going to keep trying. I can see the light now xD
thanks rtblittlebrown
Note: For FXP047 onwards, pls follow the guide here: http://forum.xda-developers.com/showthread.php?p=19493762#post19493762
This is a direct FXP046 port to xRecovery so that people with locked BL can also enjoy this great piece of work from FXP Team.
It is 99.9% FXP. I only add in some files to make it run on Free Kernel (4.05.4 with modified ramdisk) and using xRecovery.
Credits:
1. FXP Team - for this beauty and their dedication in this project
2. Z & J, doomlord, azuzu - for too many things to mention
3. Tkymgr aka Goro - for the kernel
4. All X10 devs - for keeping the phone alive
5. All rom users - for testing and helping each other.
Links (do not mirror):
FXP46 main rom: http://www.multiupload.com/HF3FIBK6X9
FXP45 main rom: http://www.multiupload.com/2YFI036RDR
FXP44 main rom: http://www.multiupload.com/P7T4NJCUZ5
Google Apps: http://www.multiupload.com/TTEW5KSODL
Official FXP Thread:
http://forum.xda-developers.com/showthread.php?t=911364
Instructions (using xRecovery)
1. Boot into xRecovery
2. Do a backup of your current rom
3. Do a factory reset if your current rom is not FXP
4. Flash main rom
5. Flash google apps
6. Reboot
Not working (WIP):
- Video Recording (show white screen)
Notes:
Do it at your own risk. I'll try to update when there's new update from FXP but I'll be too busy to support this.
greatz..thx..for lock BL ?
reserved ---
wow truly amazing...thanks cobrato
http://forum.xda-developers.com/showthread.php?t=1296545
andreloureiroo..
jianlinooi said:
http://forum.xda-developers.com/showthread.php?t=1296545
andreloureiroo..
Click to expand...
Click to collapse
thanks @jianlinooi! did you try it? any bugs? I'm downloading right now!
does it have the data bug from FXP044?
Sent from my X10 using XDA App
andreloureiroo said:
thanks @jianlinooi! did you try it? any bugs? I'm downloading right now!
Click to expand...
Click to collapse
jianlinooi said:
http://forum.xda-developers.com/showthread.php?t=1296545
andreloureiroo..
Click to expand...
Click to collapse
andreloureiroo said:
is it really?! it doesnt mention X10 on the model or file name
Sent from my X10i using XDA App
Click to expand...
Click to collapse
jianlinooi said:
http://download.cyanogenmod.com/?device=es209ra
offcial for x10
Click to expand...
Click to collapse
jianlinooi said:
i cant try it..i din unlock BL..
Click to expand...
Click to collapse
Please dont post something that is not related to this thread. you messing the thread.
@Cobrato....full wipe, cache wipe, dalvik wipe require?
ballubas said:
does it have the data bug from FXP044?
Sent from my X10 using XDA App
Click to expand...
Click to collapse
No data bug (stated in op)
Sent from my X10i using XDA App
Arnold.Alexius said:
Please dont post something that is not related to this thread. you messing the thread.
@Cobrato....full wipe, cache wipe, dalvik wipe require?
Click to expand...
Click to collapse
Yes. The install will wipe everything
Sent from my X10i using XDA App
???
How is it posible this one hase no data bug and why are you now making this if the FXP is in a little bit of trouble and not stable. And are you going to update every version that FXP brings out?
Maby you should share it with J why this one has no data bug.
Seconde, Lately i see a lot of work of devs changed by other devs on xda.
That is new because this whas never the case i while back.
Good luck.
ps Unlocking bootloader is just 5 minutes of work and this port 5 days.
So lacy people unlocked your bl and go with the flow
jianlinooi said:
rom works well...any theme?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1167075
robertberma said:
How is it posible this one hase no data bug and why are you now making this if the FXP is in a little bit of trouble and not stable. And are you going to update every version that FXP brings out?
Maby you should share it with J why this one has no data bug.
Seconde, Lately i see a lot of work of devs changed by other devs on xda.
That is new because this whas never the case i while back.
Good luck.
ps Unlocking bootloader is just 5 minutes of work and this port 5 days.
So lacy people unlocked your bl and go with the flow
Click to expand...
Click to collapse
It's my phone so the choice to unlock or not is mine not yours.
If J is not happy I can close the thread. No issue for me.
I really wish I can help but I'm not a dev. I just know that when I run it on Goro's kernel there's no data/wifi bug. And the rom is rock solid.
I mentioned in his thread that the problem could be kernel related but people can run fxp44 kernel on fxp30 with no problem so I'm confused.
My intention is to let people with locked BL to enjoy this rom too. Did I claim credit for this or anything? Why are you so upset about it?
robertberma said:
No i am not upset, And offcourse everybody should do with his phone what he likes.
I am also confused, because a few weeks back when this bug came i made a moddification with the fxp30 and took al the lib and app files of the FXP40.
So i had no bug and i had a working camera in my fxp30.
I posted it in a new thread and took no credits for this worked. Thanks every dev for this and also wroth that this thread would be delete if the bug is resolved, but for now people could use a FXP rom with no bug and working camera.
A lot of people where positive but mr Clown shut down my thread. Because also people where angry.
So i am confused this thread still is open and nobody is angry.
More and more roms are for unlocked bl, i bad in the near future there is no way a round it and you realy should unlock it to flash roms. I think you can not keep up to make all the roms for locked bl.
Thanks and no problems friend, its cool.
by
Click to expand...
Click to collapse
because FXP rom is for unlocked bootloader ONLY and this rom worked with locked bootloader.
robertberma said:
No i am not upset, And offcourse everybody should do with his phone what he likes.
I am also confused, because a few weeks back when this bug came i made a moddification with the fxp30 and took al the lib and app files of the FXP40.
So i had no bug and i had a working camera in my fxp30.
I posted it in a new thread and took no credits for this worked. Thanks every dev for this and also wroth that this thread would be delete if the bug is resolved, but for now people could use a FXP rom with no bug and working camera.
A lot of people where positive but mr Clown shut down my thread. Because also people where angry.
So i am confused this thread still is open and nobody is angry.
More and more roms are for unlocked bl, i bad in the near future there is no way a round it and you realy should unlock it to flash roms. I think you can not keep up to make all the roms for locked bl.
Thanks and no problems friend, its cool.
by
Click to expand...
Click to collapse
I guess I have missed all the actions as I was out of the forum for 2 months due to work commitment.
If the mod feel that this thread is not appropriate it's okay with me.
I did this to see the progress of the development but a friend who tested for me suggested that I share it.
I just don't find a compelling reason to unlock the BL yet
Cheers
cobrato said:
I guess I have missed all the actions as I was out of the forum for 2 months due to work commitment.
If the mod feel that this thread is not appropriate it's okay with me.
I did this to see the progress of the development but a friend who tested for me suggested that I share it.
I just don't find a compelling reason to unlock the BL yet
Cheers
Click to expand...
Click to collapse
Couldnt agree with you more...everything works so flawlessly so far except for the bugs stated in the OP...great job bud keep it up
Nice work ! Thanks !
Edit : well, anyone can figure out what "freeXperia" means I guess.
Greattt so you finally posted this Cobrato, Thanks Mr.
Been testing the FXP042's port by Cobrato & now this on Doomlord's bootmanager for a while now & it's my daily rom, Brilliant work
@robertberma: Stop spamming this thread with your pointless assumptions & ramblings, This is a great piece of work & is useful for both people on locked BL & Unlocked BL and also may help fixing the bug in FXP's rom
Does anyone have the working zmod camera apk to hand. Save me downloading the whole rom.
Thanks
Kieron
Sent from my X10i using xda premium
Another spammer, pm me please. Not here.
You mean this thread?
http://forum.xda-developers.com/showthread.php?t=1271169
and this one i deleted myself, look at the post date. Different day as the other thread so your wrong with saying 4 threads in on day.
http://forum.xda-developers.com/showthread.php?t=1278103
So keep your facts stread before saying something.
Does not look deleted, does it?
Thank you
O and please find me the other two threads i made because i can not find any, that were made in one day.
Hi All,
I have Dell Streak 5 with Android Version - Froyo 2.2.2, Baseband Version - GAUSB1A135500-EU, Kernel Version - 2.6.32.9-perf, Build Number - 16077.
I want to upgrade froyo to gingerbread, so please let me know the process of upgrading & also applicable links for downloading the softwares & steps required.
i suggest not to upgrade if the current rom is working correctly to you...
upgrading would always have its significant problem ... if you are prepared to handle all the problems that may arise...
goto to dsc thread and start from dsc 1.0 ...
deysmacro said:
i suggest not to upgrade if the current rom is working correctly to you...
upgrading would always have its significant problem ... if you are prepared to handle all the problems that may arise...
goto to dsc thread and start from dsc 1.0 ...
Click to expand...
Click to collapse
+1
Sent from my Xperia S using xda premium
What kind of problems may be expected from the best of the custom ROMs listed at http://forum.xda-developers.com/wiki/Dell_Streak_5/ROMs? Which of those ROMs would be best for the retail version of the Streak 5?
deysmacro said:
i suggest not to upgrade if the current rom is working correctly to you...
upgrading would always have its significant problem ... if you are prepared to handle all the problems that may arise...
goto to dsc thread and start from dsc 1.0 ...
Click to expand...
Click to collapse
like i said... if it is working as it should, dont upgrade... but if you want to try and experience it yourself, try dsc 1.0 first... then try others when you become familiar... there is no absolute problem because everyone face issues quite differently...
This is my first android phone so flashing roms was a huge challenge for me. But well worth the time. Currently using CM7 port and it has a lot more functions that I enjoy.
must be in gingerbread ,because more fast ,more stable ,front face camera. I flash all the roms that post in xda-dev.,now i am on [ROM] Miui-Lewa 2.3.7 beta.
I'm still on stock, never had a problem with it so never had enough urge to try anything else. I will probably flash whatever rom DJSteve comes up with though. (if he does) as it's bound to be a major step up.
can u help me ; show me the step by step to update my dell streak 5
pschvn said:
must be in gingerbread ,because more fast ,more stable ,front face camera. I flash all the roms that post in xda-dev.,now i am on [ROM] Miui-Lewa 2.3.7 beta.
Click to expand...
Click to collapse
hi there... can u teach me step by step to update my dell streak 5...
dsc 1.0
deysmacro said:
i suggest not to upgrade if the current rom is working correctly to you...
upgrading would always have its significant problem ... if you are prepared to handle all the problems that may arise...
goto to dsc thread and start from dsc 1.0 ...
Click to expand...
Click to collapse
hi.. where is dsc 1.0.. i can't find it
byakuya9687 said:
hi.. where is dsc 1.0.. i can't find it
Click to expand...
Click to collapse
Get ready for a lot of reading.
http://forum.xda-developers.com/showthread.php?t=1314898
Just to make things clear, DSC is currently on version 2.3. 1.0 is no longer available.
byakuya9687 said:
hi there... can u teach me step by step to update my dell streak 5...
Click to expand...
Click to collapse
Hi byakuya,
There are many many topic to read, sure you will be confused, so did I when I started. The best advice given to me by senior members here was to get familiarize with xda-developers.com. But anyway, here is how I got started:
1) There are forums divided into 5 sections at here:
http://forum.xda-developers.com/forumdisplay.php?f=695
I think you know this already, correct?
2) There is Dell Streak 5 wiki here:
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak
a) Scroll below, and you will find Stock ROMs and Recoveries links. - Note, still you have to find specific forums to tell you more. The more the better!
DO NOT go blindly doing things.
b) Scroll below more, and you will find Custom ROM title with link to the Custom ROM page.
Or you could just go to this link directly: http://forum.xda-developers.com/wiki/Dell_Streak_5/ROMs
On that ROMs page I mention, scroll below until you see
_n0p_ DSC 1.0 2.3.3 407 Yes Mar 26, 2012 Link Mirror
***You must click the Mirror that will start the downloading. Note, the Link is no more there, maybe _nop_ has taken it out.
I just recently download the DSC v1.0 and flash it, it works, but I did not use it more than 30 minutes as I was just testing a short while. I can't say more.
One more thing, you really got to read more, I am still learning too. It does requires patience and calmness, but it would help from getting into big trouble later. Reading is a MUST.
A Senior Member, Strephon Alkhalikoi, shared me this link that explain Kernel & Baseband difference :-
http://forum.xda-developers.com/showthread.php?t=1574886
And in that post you can find, Theonew, Recognized Contributor, share this link on Android Terms,Slang,Definitions & Guides !Revised! UPDATED!! 06/12/2013 :-
http://forum.xda-developers.com/showthread.php?t=1466228
OK. Hope that will help.