[Q] USB RJ45 : Drivers ? - Gen8, Gen9, Gen10 Q&A, Help & Troubleshooting

i search a driver for usb RJ45
i would like to connect this adaptator on my 101
have you an idea ?

cajl said:
i search a driver for usb RJ45
i would like to connect this adaptator on my 101
have you an idea ?
Click to expand...
Click to collapse
I dont know anything about this "usb r45" what is this?
If there are linux drivers, someone could compile an android with the including linux drivers

RJ45 is a conector, usually for an Ethernet connexion (not only but i think that it's what he means).

eagleofdeath13 said:
RJ45 is a conector, usually for an Ethernet connexion (not only but i think that it's what he means).
Click to expand...
Click to collapse
Your correct, rj45 is normally for Ethernet.
Sent from my A101IT using XDA Premium App

(but not only ^^)

Related

It's possible connect tab to a LAN ?

there are many hotel rooms that have only LAN and no WIFI.
is there any possibilty to connect the tab (wifi-version) with an adapter and ethernet-cabel ??
I think it could work with a hardware adapter like this:
http://www.amazon.de/Adapter-Konver...1ES6/ref=sr_1_1?ie=UTF8&qid=1313411336&sr=8-1
but are the drivers for it in android ?
thanks
spirotech
spirotech said:
there are many hotel rooms that have only LAN and no WIFI.
is there any possibilty to connect the tab (wifi-version) with an adapter and ethernet-cabel ??
Click to expand...
Click to collapse
Search all of XDA for "usb ethernet", I think this has been done with other tablets. Alternatively you can buy a travel access point that will get you connected without having to be tethered.
A travel access point is likely far easier than a USB-to-Ethernet adapter.

Usb mass storage

Hi
How i connect flash memory or usb mouse with my atrix like galaxy note and s II
Without weptop
is there any way to work atrix with usb mass storage OTG cable???
Like kernel support it.
Sent from my MB860 using XDA App
scofilde said:
Hi
How i connect flash memory or usb mouse with my atrix like galaxy note and s II
Without weptop
is there any way to work atrix with usb mass storage OTG cable???
Like kernel support it.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Wrong section, this is for development. Anyway, yes, if you modify a POWERED USB hub to send 5 volts back to the atrix through a USB OTG adapter, you can use the ports for whatever you'd like.
You need something like this http://db.tt/DVLqgxHl its basically phone - otg cable - y USB to mini USB (where the mini USB is in the hubs host side and one of the USB is in the otg cable, while the other is in the client side of the powered hub, that way no soldering or modding of the hub /cable is needed) - powered USB hub - peripherals (mouse, kb, USB single, USB hdd etc)
it these cable work ??
http://australianrobotics.com.au/sites/default/files/imagecache/product_full/sku_50774_1.jpg
or
http://ecx.images-amazon.com/images/I/41WJpKJ2ArL._SL500_AA300_.jpg
???
im very sad because The S II and Note has these feature "Connect Flash Memories"
Any way
Help me if there any way to make this
seargent007 said:
Wrong section, this is for development. Anyway, yes, if you modify a POWERED USB hub to send 5 volts back to the atrix through a USB OTG adapter, you can use the ports for whatever you'd like.
Click to expand...
Click to collapse
Right section, it's a question!
Sent from my MB860 using xda premium
any one help me please , video , tutorial ...

Usb to Cat-5

I work in IT and I thought it would be nice to use my prime for testing routers, switches & ect. I got a belkin usb 2.0 ethernet adapter and it works great. I am running ICS by the way.
This one?
http://www.belkin.com/IWCatProductPage.process?Product_Id=281799
ICS feature list didn't show support for USB LAN adapters. So you're saying standard kernel provides support? Can you up a pic of the networking setup in ICS?
---------- Post added at 03:01 AM ---------- Previous post was at 02:51 AM ----------
Looks like there's a driver pack for HC 3.2 for rooted TF101. Hope to see same for ICS.
http://forum.xda-developers.com/showthread.php?t=1274656
Super curious about this..
http://www.amazon.com/Belkin-F4U047-RS-Ethernet-Adapter-100MBPS/dp/B005UUY24A
would this work?
I remember the reading somewhere that the prime can use a usb the eternity adapter without rooting the prime
And cheap once from amazon and dx also wormd
I'll try to find the link for it
But if someone knows please correct me if I'm wrong
This is the one I got
http://m.radioshack.com/radioshack/product/detail.do?itemId=12182056&categoryId=&path=
https://www.youtube.com/watch?v=LKCOB_sdwYs&feature=youtube_gdata_player
Hmm, I have the D-Link DUB-E100. I'll have to see if that'll work when I get home.
It worked with the Honeycomb drivers, FWIW.
Just tried the USB adapter from my Mac Air and it just worked
With micro HDMI to VGA, who needs a laptop now... well apart from Android development still being better in Eclipse
Can anyone try a USB wifi adapter and see if it works? If it does, please mention adapter make & model. TIA.
that is v cool, have you tried using a console cable to usb for switch configuration? e.g. getting a serial to usb adapter and plugging into the switch and using telnet client on your laptop?
fro5tie said:
that is v cool, have you tried using a console cable to usb for switch configuration? e.g. getting a serial to usb adapter and plugging into the switch and using telnet client on your laptop?
Click to expand...
Click to collapse
I went a different route. Still having some issues getting it to work though. I'll post a [Q] thread on it and see if I can get some positive feedback.
could someone test 1080p streaming via ethernet?
oremy said:
could someone test 1080p streaming via ethernet?
Click to expand...
Click to collapse
Do you want internet video or pc to tab streaming tested?
shawnfr said:
Just tried the USB adapter from my Mac Air and it just worked
Click to expand...
Click to collapse
Hi Shawn,
seriously, your Macbook Air USB-Ethernet adapter works?
Can you confirm whether your Prime is rooted? Which version of Android is it running?
Thanks,
Eddie
Belkin usb to gigabit ethernet works too
I have one of these usb to ethernet devices:
http://www.amazon.co.uk/Belkin-USB-Gigabit-Ethernet-Adapter/dp/B002N56EWI
Works without any added drivers, etc. on the 'Prime running ICS. I rooted mine straight away so can't say 100% that it works without root access before anyone asks (sorry!).
Streams 1080p videos flawlessly from my pc via the MyNET DLNA app and also from the 'Prime's internal memory to my Samsung TV via DLNA (again using MyNet).
Gotta love the 'Prime
This $7 USB Ethernet adapter (only 100MBps) from Monoprice works out-of-the-box with the TF201. The "asix" linux module is builtin to ICS and provides the functionality. The adapter automatically picked up an IP address via DHCP the moment I plugged in the ethernet cable. Manual network config using the "ip addr" command is also a possibility, although I assume it requires root access if you do not already have that.
Code:
<6>[390237.318936] usb 1-1.2: new high speed USB device number 84 using tegra-ehci
<6>[390237.373125] usb 1-1.2: New USB device found, idVendor=0b95, idProduct=772a
<6>[390237.374868] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[390237.375961] usb 1-1.2: Product: AX88x72A
<6>[390237.377596] usb 1-1.2: Manufacturer: ASIX Elec. Corp.
<6>[390237.379214] usb 1-1.2: SerialNumber: 000002
<6>[390238.066107] ASIX USB Ethernet Adapter:v4.2.0 19:32:21 Jan 17 2012
<6>[390238.066164] <6> http://www.asix.com.tw
<4>[390238.068588] eth%d: status ep1in, 8 bytes period 11
<6>[390238.098586] eth0: register 'asix' at usb-tegra-ehci.2-1.2, ASIX AX88772A USB 2.0 Ethernet, 00:60:6e:05:22:fb
<4>[390238.122315] eth0: rxqlen 0 --> 10
<4>[390238.122645] eth0: rxqlen 10 --> 20
<4>[390238.122942] eth0: rxqlen 20 --> 30
<4>[390238.123389] eth0: rxqlen 30 --> 40
<4>[390238.123600] eth0: rxqlen 40 --> 44
<4>[390238.132625] eth0: ax88772a - Link status is: 0
I am a fan of the BTEP terminal client for Android, but the ssh binary built-in to it will not connect to Cisco devices for me. The ConnectBot app connects flawlessly, however.
Next stop for me: serial console (going to attempt wired and/or bluetooth).
I even plugged in my kids Wii ethernet adapter and it worked! (ICS not rooted).
jdudb said:
I even plugged in my kids Wii ethernet adapter and it worked! (ICS not routed).
Click to expand...
Click to collapse
Nice. My wifi works great but i am sure others will love this.
Was at Microcenter today.. picked up an Apple one that does 1Gbps.. not in the cheapie range at $30, but we'll see how it works out
http://www.microcenter.com/single_product_results.phtml?product_id=0351619
Just waiting to get my Prime back now from ASUS though
I just tested out two different Prolific 2302 USB Serial adapters for connecting to my Cisco stuff's console port. They both "worked" from the Android OS point-of-view (kernel detected device/module and attached to ttyUSB0), but only one worked with the "Slick USB 2 Serial Terminal" app which seems to be the only option for this usage. The app is not awesome for connectivity and the interface is a little quirky, but it is functional and beats carrying a heavy laptop for quick simple stuff. If I expected to be in serial console for more than 30 minutes or so I'd bring my MacBook.
oremy said:
could someone test 1080p streaming via ethernet?
Click to expand...
Click to collapse
Dam I love my prime. I didn't even convert the 1080p video with handbrake. Tegra 2 would never do this. I have fixed the lag-I\O issue on my prime & I don't have WiFi issues so your results may very.
http://www.youtube.com/watch?v=7sinv2ZX2Sg

New Android User Lots of Questions

HI
Just bought a cheap tablet a Asus Memo Pad not the HD one the one before.
Single core VIA cpu etc
So the first thing thats been bugging me is that i bought a RJ45 to USB adapter and it doesnt work on my tablet.
I turn off wifi then connect everything and nothing. Anyone knows why ?
The second is it worth it to root my tablet ? Even if its only to get rid of asus app´s ?
If i rooted would i be able to install Android 4.3/4.2 because i got the 4.1 version so the newer ones are better yes ?
Is there any kind of newbie guide to rooting this tablet ?
Thanks and sorry for all the questions and sorry if its on the wrong spot.
Rarosh said:
HI
Just bought a cheap tablet a Asus Memo Pad not the HD one the one before.
Single core VIA cpu etc
So the first thing thats been bugging me is that i bought a RJ45 to USB adapter and it doesnt work on my tablet.
I turn off wifi then connect everything and nothing. Anyone knows why ?
The second is it worth it to root my tablet ? Even if its only to get rid of asus app´s ?
If i rooted would i be able to install Android 4.3/4.2 because i got the 4.1 version so the newer ones are better yes ?
Is there any kind of newbie guide to rooting this tablet ?
Thanks and sorry for all the questions and sorry if its on the wrong spot.
Click to expand...
Click to collapse
RJ45 to USB???? The hell is that? A Ethernet to USB type of setup?
Sent from my LG-LS970 using xda app-developers app
desert54 said:
RJ45 to USB???? The hell is that? A Ethernet to USB type of setup?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Something like this:
ecx.images-amazon.com/images/I/61LAT28EXlL._SL1500_ .jpg ( cant put links yet )
USB to RJ45 Ethernet Adapter made for Android tablets. (EXCEPTIONS are listed in description.) Uses less power than typical larger USB adapters.
Small "thumb size", lightweight design, weighs less than 28 grams. Fits easily in pocket.
Plug-N-Play - no drivers or installation needed with Android 3.2 or greater. Expert help from manufacturer's web site, or by emailing manufacturer, if needed.
Works with Ethernet enabled tablets and docking stations having a full-sized USB port. Also works with Micro-USB-OTG and Mini-USB-OTG by adding BobjGear OTG adapter cable. Also Ultrabooks, MacBook, Windows, Linux, Mac, ChromeOS.
Additional drivers are included for MS Windows 32 and 64 bit, Linux, iOS. RoSH, CE, FCC compliant.
Sorry if i didnt explain correctly

[Q] Ereader+bluetooth-dongle+bluetooth keyboard?

The (E-ink) Onyx Boox c65 runs android 2.3. (can't link, I'm new user)
Would it be possible to connect a bluetooth keyboard via a usb-bluetooth dongle inserted in the Ereader mini usb slot?
Hope this is the right forum
Carsten J
Cast2501 said:
The (E-ink) Onyx Boox c65 runs android 2.3. (can't link, I'm new user)
Would it be possible to connect a bluetooth keyboard via a usb-bluetooth dongle inserted in the Ereader mini usb slot?
Hope this is the right forum
Carsten J
Click to expand...
Click to collapse
It's impossible. For a USB dongle, you need OTG functionality (USB Host). The Onyx devices don't have it (from a hardware perspective).
afainber said:
It's impossible. For a USB dongle, you need OTG functionality (USB Host). The Onyx devices don't have it (from a hardware perspective).
Click to expand...
Click to collapse
Ah ok. But a USB-OTG cable doen't gives that functionality?
Cast2501 said:
Ah ok. But a USB-OTG cable doen't gives that functionality?
Click to expand...
Click to collapse
No, you need the hardware of the device to support OTG (and then also the kernel) and the hardware of the Onyx C65 does not support it, no matter which cable you use.
afainber said:
No, you need the hardware of the device to support OTG (and then also the kernel) and the hardware of the Onyx C65 does not support it, no matter which cable you use.
Click to expand...
Click to collapse
Ok, thanks for the reply.
CJ

Categories

Resources