Hi all,
I tried three different ROMs, specific P509 ROMs for my 509 and even though it appears everything goes through, even though I can see the "data" icon and the directional arrows flashing as if it is getting data - I can't seem to be able to go anywhere - not a website, not a mail server, not even the android marketplace.
Any idea what's going on? I am on T-Mobile and currently on the Cyanogenmod ROM... my APN settings appear to be correct however for whatever reason it keeps failing...
Any help would be highly appreciated!
Thanks,
Gene.
Related
Hey all,
I updated to the newest HTC Rom, Version 3.56.651.0. Now however I can't access the internet either through the internet explorer mobile or opera mobile. I am on hold with HTC Global Support, but figure y'all would be able to help me before them
Thanks
orionsl59 said:
Hey all,
I updated to the newest HTC Rom, Version 3.56.651.0. Now however I can't access the internet either through the internet explorer mobile or opera mobile. I am on hold with HTC Global Support, but figure y'all would be able to help me before them
Thanks
Click to expand...
Click to collapse
Correction: you flashed to Sprint firmware 3.56, and I'm going to assume you're not a Sprint customer and that you let Sprint's customizations run. What carrier are you on?
No, I am on sprint. Also text messenging and regular phone calls work just fine. I checked my MDN and MSID, they are all in there too. I loaded the newest rom on the HTC update page.
Error
What actually exactly happens?
Do you get a Incorrect Login/Password...or what?
That might help to begin troubleshooting (I had a similar problem)
When I enter a URL into the address bar of internet explorer, the lower bar begins to say Connecting, to Locating, and then an error stating that Page could not be found. Opera mobile gives me a similar error and so does Live Search. Currently there is no error 67 asking for user name and password.
One thing to note, when updating the ROM I didn't allow for customizations to run.
I found the solution, allow for customizations to run. I did a hard reset and let them run (sigh bogged down with bloatware). Now internet is running just fine.
I am a noob at this, but after doing some forum reading. Apparently sometimes data connections randomly kick off after updating the Radio and if you don't allow customizations to occur, then you have to run IOTA.cab in order to reestablish connections.
I am attaching the IOTA cab courtesy of a user at PPCGeeks in case anybody has a problem too
hard reset, let the customizations run, connect and do something online.
hard reset again, this time without letting them run.
Should have internet. If you dont mind resetting at least.
Hi Guys.
So I was finally able to get a cooked ROM on my Fuze using an older XP machine that I had. But now, after trying both ROMeOS and DCS, I'm not getting any 3G signal. What i do get at times is the hsdpa signal, but i don't actually receive it; none of the data services are working (internet, weather, youtube, etc.). Could someone please tell me how to get 3G on my Fuze?
EDIT: It seems like I am getting the HSDPA signal at times but its very tempermental
anyone have a solution?
djcaston said:
anyone have a solution?
Click to expand...
Click to collapse
In start>settings>phone>band do you have the auto in both drop menus on??
also try start>settings>connections>advanced network> in the HSDPA try to see which option is used. try to use 'enable HSDPA Only' or even disable it completely and see what happens.
had the same issue and this seemed to fix it.
Advanced Config Tool>menu>more settings>Comm manager - Add 3g to comms manager.
Open comms manager and switch 3g off > soft reset > switch 3g on > soft reset
Good luck
thanks ill try that out when i get a chance. what rom were you using?
EDIT: nvm saw it in your sig
did you run the network config wizard after flashing the rom?
it prompts (or detects) your country and operator and configures most things for you.
if it's not part of your cooked rom, look for it as a .cab
yea i ran the config but it still doesnt connect to 3g. I'm trying the suggested solution now
still not working....
I still cant run apps like cellular video and the youtube app. Youtube just wont load the vids, and CV gives me a message that says it's only supported to 3G phones. I really hope theres a solution to this since I really love ROMeOS but I want apps like youtube and CV
haha i give up. I officially ***king hate this. I feel like I spent 300 bucks on a phone that is perfectly engineered and has crap software on it. Im so agitated i can't even think straight. I'm really close to just getting rid of this phone and i dont even know.
Well... felt good to tell someone.
I am having the same problems. I am using an ATT Fuze and I flashed ROMeOS last night and now I cant to connect to the internet or use the youtube app via HSDPa/HSUPA, 3G, or Edge. I can use these applications if I turn on Wi Fi, but if I use cellular internet I get a big red sign that says "ERROR" and then followed by "the remote server refuses to perform the request. This address is not available". It also shows an H on the top bar if anyone was wondering. Any fix for this or just try a different ROM?
Update: I tried a new ROM and same thing. Does anyone have a solution? I am sure us two aren't the only ones with this problem!
I am getting pretty desperate, can anyone help?
same problem here, my area supports hsdpa but with a speedtest i have between 24 and 36kbit
whenemusattack said:
I am having the same problems. I am using an ATT Fuze and I flashed ROMeOS last night and now I cant to connect to the internet or use the youtube app via HSDPa/HSUPA, 3G, or Edge. I can use these applications if I turn on Wi Fi, but if I use cellular internet I get a big red sign that says "ERROR" and then followed by "the remote server refuses to perform the request. This address is not available". It also shows an H on the top bar if anyone was wondering. Any fix for this or just try a different ROM?
Update: I tried a new ROM and same thing. Does anyone have a solution? I am sure us two aren't the only ones with this problem!
Click to expand...
Click to collapse
go to start>settings>Connections>Advanced network>GPRS "make sure CHAP authenticaion is selected. that is what ATT network uses. then go to Start>Settings>Connections>Connections> select manage existing connections and then go to the proxy tab. make sure your remove both check marks and you should be good to go.
Wow, thank you HackMimic that worked! I tried everything I could think of and was about to go back to stock ROM just to use 3G, but now I can continue using flashed ROMS. To the original poster of this thread try the above and it should work as I had the exact same symptoms you described and now I am cruising along on HSDPA! Once again thanks HackMimic!
no problem. i had the same issue back in the day when the connection setup app first cam out i noticed that it always seem to set the GPRS Settings to PAP instead of CHAP which is needed for MMS and the net over here in america. also noticed issues with proxy selected. glad i could help.
Yea I tried HackMimic's fix but not directly from you . I was reading on how to configure skyfire and they said to do that, and what ended up happening is all of the sudden the youtube app worked and so did everything else. Regardless, thanks for the solution. I'm a little more amazed everyday by the wealth of knowledge on this forum
Hey there,
I've been experiencing data connection issues very commonly since receiving this phone. I've gone from 1.2.6 to 1.5.7 to 1.8.3 to 2.3.4 and after trying all builds, my data (after using WiFi) is very unstable.
The connection symbol will disappear completely after a while of WiFi and won't turn back on until I go to my access point names and "Edit" (just opening the edit page fixes it) the primary APN. Other symptoms include but probably aren't limited too; data turning to upload only.. the up arrow is lit up but never downloads anything and also constant drop outs while in use.
I know my mobile carrier isn't the most reputable in Australia, but this phone is running on their BRAND NEW (weeks old) 850MHz network, leading me to believe that it's a hardware issue (apparent on both Froyo and Gingerbread too) D:
Any help is greatly appreciated
Thanks in advance
- DarkRyoushii
i had the same issue, everytime i would start and app that required data i qould have to sit there and refresh over and over, and it would just time out saying data unavail, even though right before i would open the app, data worked fine, so i flashed the new radio and took out my sim card while doing it, reset apn list to default and made sure my phone was on hspa, now shes working perfectly
Alright, I rooted my phone and installed CM7 about 3 months ago, and had no problems ever until recently. My phone started force closing the messaging system and my media system. Then, I restarted my phone and it got stuck on the Vibrant screen, before the skateboarding CM7 android. I ended up flashing my phone back to the Samsung Vibrant T-959 stock using ODIN, but since I have Cincinnati Bell, I had to use T-Mobile's stock. My phone works perfectly fine except one thing... I DON'T HAVE DATA! I can't get online or access the market... It says I have no internet connection. Can anyone help me?
If there is something out there that I can use thats better than this T-Mobile stock software, please let me know... I'm open to anything at this point. I just want something stable and clean.
This sounds like the problem I have everytime I flash a Froyo ROM of any sort: I lose my APN.
You can check to see if that happened to you by going to Wireless, Mobile Networks, and checking to see if any APN is needed. If it says something along the lines of "Enter New APN?" or some such (I'm on MIUI at the moment so can't be exact), then your APN got wiped. Cincinnati Bell lists the correct APNs for the Vibrant on their website.
http://cbwportal.wdsglobal.com/phon...31&mobileNumber=&contractId=185&step=phone.vm
Go there, and enter both the WAP and MMS APNs, selecting the WAP one. Also, to curb another common problem, don't enter a Proxy for the WAP. It causes major browser slowdown and you data works just fine if not better without it.
did u try....
Taking the sim card out? Had the same problem, I took the sim out and put back... problem solved.try that
Hey, I'm having the same problem. Mine shows that I am connected and have full bars with 3G or H access. However, when I try to use the browser, gmail, market or any other app requiring data, it says that it fails to connect. I've been struggling with this for a couple of days now. I've already tried removing the sim card and resetting everything. Any help would be awesome, thanks!
Hello.
I recently purchased an unlocked AT&T model V10 and am using it on Metro PCS.
The phone is having a hard time making and receiving calls. It will take a long time for an outbound call to begin (or will not even go through after a lengthy wait), and many calls are not being received and going straight to voicemail.
The problem and severity is intermittent, sometimes it will work without issue and other times no calls can be made or received for some time.
The data connection appears to be solid whenever it is being used, it just appears there is a problem with the phone trying to negotiate from a data connection to a GSM cellular connection.
Any input would be greatly appreciated as I have been searching around and have not had any luck. I've tried reseating the SIM, factory resets, etc.
Thank you.
MAybe wrong rom on it? Did you try reinstall software with lg bridge?
klemen241 said:
MAybe wrong rom on it? Did you try reinstall software with lg bridge?
Click to expand...
Click to collapse
I'm running the factory AT&T install, so no custom rom - I will try LG Bridge and see if there are any available updates.
Thanks for the tip, I haven't done much with LG phones before - I am certainly open to rooting the phone / trying a custom ROM to see if that will sort things out. It just seems like either a setting (I tried all different APN settings to no avail) or a software issue as it does work, just not consistently.
en5 said:
I'm running the factory AT&T install, so no custom rom - I will try LG Bridge and see if there are any available updates.
Thanks for the tip, I haven't done much with LG phones before - I am certainly open to rooting the phone / trying a custom ROM to see if that will sort things out. It just seems like either a setting (I tried all different APN settings to no avail) or a software issue as it does work, just not consistently.
Click to expand...
Click to collapse
there are custom roms for h901, other than that no custom roms
klemen241 said:
there are custom roms for h901, other than that no custom roms
Click to expand...
Click to collapse
Thanks, I noticed that I was having trouble finding an update past H90021w online and the phone shows no update available (I was previously on H90020j).
So now Wi-Fi calling is an option, however it does not let me enable it, it just sits on "Processing" until eventually it gives me an error connecting with the network. I turned it on manually through the SVC menu and it shows it as enabled in the settings, but I don't think it is actually working as it doesn't give any indication as to whether or not it s on a Wi-Fi call.
Looks like I'm running out of options and may need to go with a different phone.
en5 said:
Thanks, I noticed that I was having trouble finding an update past H90021w online and the phone shows no update available (I was previously on H90020j).
So now Wi-Fi calling is an option, however it does not let me enable it, it just sits on "Processing" until eventually it gives me an error connecting with the network. I turned it on manually through the SVC menu and it shows it as enabled in the settings, but I don't think it is actually working as it doesn't give any indication as to whether or not it s on a Wi-Fi call.
Looks like I'm running out of options and may need to go with a different phone.
Click to expand...
Click to collapse
yea you had bad luck with this one, v10 is great phone, but no custom or anything. I am luchy i have 960a, so everything works haha