Hi I would like someone to help me, I bought a Motorola Atrix 1 week ago from ebay, and this atrix was updated by the seller to 4.5.91 with Android 2.3.4.
I unlocked the bootloader all went fine after that I installed CWM everything was great until I wanted to install Cherry Blur.... I flashed it and when I rebooted everything it just stucks on a Infinite Boot Loop...
What should I do I cant flash anything else and dont know how to mount the phone internal storage to flash a new zip.
Please Help
Pull Battery if you havnt already hold Volume down and power button
when you go to boot your phone back up. hold until it says fastboot
Use volume down to cycle thur menu then up to select android recovery
Once in recovery go to wipe / factory reset ( WIPE )
Then Wipe Cache
Then Scroll down to Mount
Scroll all the way down to Mount as USB plug your cable in
and it should show you your ext sd card must have one .
Copy a Fruit cake file or Kenneth build of gingerbread or w/e.
Then go back to install it.
awca22 said:
Hi I would like someone to help me, I bought a Motorola Atrix 1 week ago from ebay, and this atrix was updated by the seller to 4.5.91 with Android 2.3.4.
I unlocked the bootloader all went fine after that I installed CWM everything was great until I wanted to install Cherry Blur.... I flashed it and when I rebooted everything it just stucks on a Infinite Boot Loop...
What should I do I cant flash anything else and dont know how to mount the phone internal storage to flash a new zip.
Please Help
Click to expand...
Click to collapse
sounds like a bad flash...reflash again...if same problem occurs...download the file again and restart the procedure....
awca22 said:
I unlocked the bootloader all went fine after that I installed CWM everything was great until I wanted to install Cherry Blur.... I flashed it and when I rebooted everything it just stucks on a Infinite Boot Loop...
Click to expand...
Click to collapse
This happened to me yesterday. For me it was a case of grabbing the wrong CMW file. In my zombie state I somehow grabbed the 2nd newest. Worked fine after that.
Sent from my MB860 using XDA App
Related
My phone is an Optimus T P509.
I instaled CyanogenMod7 and the phone stuck at cyanogenmod7 boot logo.
How can I get out off this and restore my nandroid backup?
How to load amon_ra_recovery custom recovery at boot?
Thank s
Remove battery .... then insert it and boot into recovery using power + home + volume down ... u r good to go ...
By the way, u posted in the wrong section
Sent from my LG-P500 using XDA App
I had this issue once and I just reflashed CM7 things got right.
Just be patient when first booting the ROM, it'll take more time due to configuration.
You may try to flash /system zip from mik_os thread.
This happens a lot for me, I haven't tried cyanogen but when I was using KDZ to downgrade to 2.2 for rooting purposes my phone got stuck at the android boot animation and after waiting for 5-10 minutes I just removed the battery and powered it back on and I was able to get it working. When I've flashed some other custom roms the same thing happens but it doesn't seem to happen when I flash the same rom over itself, it's able to get past the boot animation with no problems in that situation for me.
ctasergio said:
My phone is an Optimus T P509.
I instaled CyanogenMod7 and the phone stuck at cyanogenmod7 boot logo.
How can I get out off this and restore my nandroid backup?
How to load amon_ra_recovery custom recovery at boot?
Thank s
Click to expand...
Click to collapse
First boot into recovery switch off Home + vol down+ Power
now flash the bootloop zip provided in mik thread
wipe cache/dalvic cache/system/sd card
mount sd card
copy the rom zip to sd card
unmount sd card
choose flash zip from sd card
finallly
S-U-C-C-E-S-S
BEST OF LUCK
Yeah, I just flashed for the first time last weekend.
I got the same thing, and after doing the "wipe" and reflashing the ROM, it worked fine.
Good luck!
i tried to use the recovery and install it but i got stuck in a boot loop. so then i sbfed back to froyo then rooted it then installed the recovery then updated it and got stuck on the "dual core" boot loader. im not sure what im doing wrong. i would post in the thread but i cant since i dont have enough posts
Same exact thing happened to me today. What i did was pull the battery and booted it back up in recovery (power button and down volume button) and did a factory reset. booted it back up and it seemed to work right.
tried that im on my 2nd round of sbf root recovery reflash. of this doesnt work im going to bed i have a 15 hour double shift tomorrow
thanks stx that worked. if anyone can post in the thread that there is a possible bug in flashing this from the p3 preroot it would be cool. it would also be cool if anyone knew how i could sync with facebook too
gnuworldorder said:
i tried to use the recovery and install it but i got stuck in a boot loop. so then i sbfed back to froyo then rooted it then installed the recovery then updated it and got stuck on the "dual core" boot loader. im not sure what im doing wrong. i would post in the thread but i cant since i dont have enough posts
Click to expand...
Click to collapse
Did you wipe data before installing? Also could you confirm the MD5 Hash
917649e16b63d99a7ec30e3c6b6f02b3 Eclipse_v0.4.zip
installed it many times from the prerooted confirms it works fine just make sure you wipe once you get into recovery and my sure you plug your phone into the wall before getting into recovery because it will not boot into recovery and get stuck in motorola logo without being plugged in
after I factory reset it it booted fine.
Sent from my DROID X2 using XDA App
I cant get it to boot in recovery(CWM) It comes up a big list of RSD BP Tools all that in a single page in white text when i try to enter recovery or any mode. And i cant get the RSD Lite drivers to install!! I already have used RSD lite 2 days ago with my phone. I managed to get phone into RSD mode once but it still wouldnt show up under the actual RSD Lite program, and it came up saying it failed to install drivers. It fails to install the driver "NS Flash Sunfire" and ive looked around and cant seem to find it anywhere.. I can get the phone into RSD mode fine, but it wont boot to CWM recovery, apparently something went AWOL. Tell me how i can get my photon back please?!
try removing all your motorola drivers and reinstalling them from yay 4 juggs link. you should be able to flash the sbf from his thread (in rsd mode) and be back in business.
Didnt even think of that.. i already had the 5.21 drivers installed, but sure enough did what you said and im flashing back to stock sbf right now. THANK YOU!
OK, so i just flashed 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_6-CM-release-keys-signed-Sprint-US and now im stuck in a bootloop of the dual core screen.. Any ideas..? I know its not latest SBF, but the link for latest was dead.. So i just used this one i had on my desktop already. Anything im missing here?
EDIT: Oh yeah, the flash went through fine and said completed, and when i boot into recovery its back to stock recovery of android triangle and my bootloader menu system is how it should be again. Im just stuck in a boot loop.. Can i go ahead and like unlock bootloader and install CWM and get back on CM7 or will i most likely still be in a bootloop even after that..? Any insight would be great
w0lf215 said:
OK, so i just flashed 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_6-CM-release-keys-signed-Sprint-US and now im stuck in a bootloop of the dual core screen.. Any ideas..? I know its not latest SBF, but the link for latest was dead.. So i just used this one i had on my desktop already. Anything im missing here?
EDIT: Oh yeah, the flash went through fine and said completed, and when i boot into recovery its back to stock recovery of android triangle and my bootloader menu system is how it should be again. Im just stuck in a boot loop.. Can i go ahead and like unlock bootloader and install CWM and get back on CM7 or will i most likely still be in a bootloop even after that..? Any insight would be great
Click to expand...
Click to collapse
you may need to factory wipe to get it to boot up... are you stuck on the dual core or the sprint now screen? it may be a bad flash as well - did it reboot by itself and such?
Im at the Dual core screen, i reflashed same sbf and its still doing same thing. ONE time it boot through the sprint now boot logo stuff, then just fell back into same old loop of just the dual core boot animation/screen. How can i factory reset it..? It rebooted right after it installed(never successfully into OS though) then RSDLite told me to manually power up phone, so i battery pulled and powered up to just have it go into moto dual core boot screen loop
Ok sweet i just unlocked bootloader and installed CWM and was able to restore to my CM7 backup fine! Im not activated atm, going to have to call sprint i guess.. But everything else looks to be working!!
Things went from bad to worst, I fixed my market update and had the utlities on the device i needed to i tryed flashing the Neutrino Rom.
After it was done it rebooted and said "failed to boot 2 starting rsd".
So I downloaded RSD Lite and found the unlock SBF which I applied. Now I can get into the FastBoot menu's and go to Android Recovery and try to do the back to stock option, it says it completes then reboots...
Then it just sits and sits and sits on the motorola Dual core logo.
Can someone please help me here. I cant seem to find any of my backups i made with system recovery or rom manager. I also didnt load RomRacers Recovery (which i just now noticed)
Any help is greatly appreciated.
So, did you unlock the bootloader before trying to flash the ROM?
Does it say "Unlocked" at the boot logo now?
Get back into fastboot and flash romracer's recovery and then try to mount the storage and get another rom on there.
SDRAKE101085 said:
Things went from bad to worst, I fixed my market update and had the utlities on the device i needed to i tryed flashing the Neutrino Rom.
After it was done it rebooted and said "failed to boot 2 starting rsd".
So I downloaded RSD Lite and found the unlock SBF which I applied. Now I can get into the FastBoot menu's and go to Android Recovery and try to do the back to stock option, it says it completes then reboots...
Then it just sits and sits and sits on the motorola Dual core logo.
Can someone please help me here. I cant seem to find any of my backups i made with system recovery or rom manager. I also didnt load RomRacers Recovery (which i just now noticed)
Any help is greatly appreciated.
Click to expand...
Click to collapse
i unlocked the bootloader after the update failed (i panicked) and yes it does say unlocked at the top now
Well, you mentioned you can get into fastboot so that's a start. You can try to flash a proper recovery and try to boot into recovery and see if you can mount the storage, or if you have a card reader you can just put a ROM on your sd card and then flash. If you can't get into recovery but you can get into fastboot you can flash a rom that way. You'll have to search for the procedure but I'm almost certain it can be done. If all else fails, you can install the unlocked "Full" SBF through RSD Lite, but it is not really recommended but should work.
SDRAKE101085 said:
i unlocked the bootloader after the update failed (i panicked) and yes it does say unlocked at the top now
Click to expand...
Click to collapse
Thanks so much. I got radracers on there and reflashed the neutrino rom again. Everything appears to be working. Now to just figure out the rest.
Thanks again.
Look tke the sd card and load the rom and google apps. Then go and fastboot wipe and re install the rom and try to boot honestly it just sounds like you got a corrupted rom
Right guys I've got a nabi 2 which I was trying to update, I finally got onto jellybean but forgot to flash the bootloader, I have it in my sd card but the nabi won't boot normally or into recovery to flash the jellybean bootloader, I can navigate to fastboot etc... But it just hangs at the menu when I sselect recovery kernel. Any ideas at all are appriciated thanks
LifeOfALegend said:
Right guys I've got a nabi 2 which I was trying to update, I finally got onto jellybean but forgot to flash the bootloader, I have it in my sd card but the nabi won't boot normally or into recovery to flash the jellybean bootloader, I can navigate to fastboot etc... But it just hangs at the menu when I sselect recovery kernel. Any ideas at all are appriciated thanks
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/showpost.php?p=53557529&postcount=2302
Follow the first link and download NABI2RESIZE. Extract that.
Then in second link download hawkcore.zip and run that bat file.
You will need to setup APX driver.
aicjofs said:
Look here http://forum.xda-developers.com/showpost.php?p=53557529&postcount=2302
Follow the first link and download NABI2RESIZE. Extract that.
Then in second link download hawkcore.zip and run that bat file.
You will need to setup APX driver.
Click to expand...
Click to collapse
Right I have got it to boot onto recovery and installed the jellybean bootloader, but now it only boots when I go to recovery abd boot as normal, also when I try to charge it when on it freezes the whole tablet and charges very slowly. Also when I am in recovery and I went to wipe Calvin cache and data it comes up "are you sure, no OS installed" and then when I do wipe it it's says successful but also unable to mount e/ data, no file or folder found. I am also unable to mount the sd card? Sorry for the long post but I wanted to get all the problems in, thanks fir all your help
LifeOfALegend said:
Right I have got it to boot onto recovery and installed the jellybean bootloader, but now it only boots when I go to recovery abd boot as normal, also when I try to charge it when on it freezes the whole tablet and charges very slowly. Also when I am in recovery and I went to wipe Calvin cache and data it comes up "are you sure, no OS installed" and then when I do wipe it it's says successful but also unable to mount e/ data, no file or folder found. I am also unable to mount the sd card? Sorry for the long post but I wanted to get all the problems in, thanks fir all your help
Click to expand...
Click to collapse
So you have the ICS bootloader installed if you followed what I said above. You have to use the ICS TWRP. Use that version to do the procedure you first started with. Restore version 2.3 system, boot and addon, then before reboot the Jellybean bootloader.
Sorry for slow response out of town this weekend.
aicjofs said:
So you have the ICS bootloader installed if you followed what I said above. You have to use the ICS TWRP. Use that version to do the procedure you first started with. Restore version 2.3 system, boot and addon, then before reboot the Jellybean bootloader.
Sorry for slow response out of town this weekend.
Click to expand...
Click to collapse
Finally got sorted, just needed to flash twrp 2.3.6, and the issue with charging was just a charger that nabi sent out as a replacement. So all is good, thanks for all the help