[Q] looping dell screen tried everything I can think of - Streak 5 Q&A, Help & Troubleshooting

one day my phone decided to stop playing nice, and without reason, started boot screen looping.
flashed it with a 354 recovery.img, and then a 354 update.pkg and then installed streakdroid 1.9.1 over that, everything went swimmingly.
then weeks of stability later, I did a reset (not the first) and weird **** came up (from the bottom of the screen, the one that normally can't be rotated to... saying "send this device back for repair, performing format do not remove battery" or something like that.
nothing was happening, so I tried to turn it off, nothing, so I pulled the battery, reinserted it and again, ran fine.
then, a day or so later, I reset the phone, and now it just loops the dell logo.
I tried flashing a 351 recovery.img, and running a 351 update.pkg and still just the loop.
I tried a nandroid backup and it says it can't mount /data/ because e: does not exist
I seem to be able to flasheverything and anything (except the nandroid data) and I have no idea what to try now...
so if there's nothing more I can do, I will need to know what the current australian ROM version is so I can flash it and maybe get it repaired.
does anybody have any suggestions?

bugmenotacc said:
. . . .
I tried a nandroid backup and it says it can't mount /data/ because e: does not exist
. . . .
Click to expand...
Click to collapse
This sounds like the error I have seen people report with ClockWorkMod. Is that what you are using for a recovery? Have you tried StreakMod recovery?

yeah, I've only used streakmod
everything I've used has been made especially for the streak, afaik...

if all else fails simply swap out the internal sd card and put in a new one. flash it with qdl tool.

Had that same errors and phone was replaced because of internal memory problem.

It´s strongly recommended to flash the stock rom/recovery/baseband first - even if its going to loop on the bootscreen - before you let Dell replace your device! You know, flashing other roms than the official ones void your warranty!

sounds like a corrupt internal sd card, if u got warranty, use it, if not then ull need to disassemble to format it

mawks said:
Had that same errors and phone was replaced because of internal memory problem.
Click to expand...
Click to collapse
Yes, this was what happened to me as well.
You can confirm this by doing the internal sd card test. This is accessed through fastboot, but I can't remember the number combination to get there. It's around here somewhere, just do a search.

From a FAQ that was on StreadDroid.com:
1. Turn off your Streak
2. Hold down the camera button all the way, as you turn on your Streak
3. At the white screen, dial in the code *#301# – This will open the engineering mode that allows you to run individual tests.
4. Dial in 10 then press Enter to run the ‘SD & SIM’ test
5. The “Internal SD” test should pass, and it should show “permanent write-nonprotect”.

internal SD card failed
internal SD:
SD card error!
CMD/Data test : PASS
Permanent write-protection
I'm assuming the best and thinking that means that the SD card had a boo boo and it had nothing to do with my interference...
so can peeps help me one more time and tell me which recovery/ROM/baseband is the current australian builds? the warranty guys are anal about that sort of stuff...
and a stupid question while I'm on the topic, is the BB amss.mbn file for a build in the update.pkg for that same build? if it's different, I'm going to need a link for the amss.mbn file because I don't know what corner of the internet they're hiding them atm...

bugmenotacc said:
internal SD card failed
internal SD:
SD card error!
CMD/Data test : PASS
Permanent write-protection
I'm assuming the best and thinking that means that the SD card had a boo boo and it had nothing to do with my interference...
so can peeps help me one more time and tell me which recovery/ROM/baseband is the current australian builds? the warranty guys are anal about that sort of stuff...
and a stupid question while I'm on the topic, is the BB amss.mbn file for a build in the update.pkg for that same build? if it's different, I'm going to need a link for the amss.mbn file because I don't know what corner of the internet they're hiding them atm...
Click to expand...
Click to collapse
http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg
this is the latest official australian build its 318BB... u probably just got a dud unit, thats my guess..
i remember wen i got my N95 yrs ago i got a dud sd card.. i told em its just the sd card but theyre stupid and nokia replaced the hole unit just in case
like i said, if u have warranty, just use it
PS. when u get ur new unit, be sure to use the 354 rom, its uses the the australian standard frequencies..
either 11 or 00 regions work best.. check here: http://forum.xda-developers.com/wiki/index.php?title=File:Dell_Streak.png#ROMs

There's currently no such thing as an 'australian build'
Streaks sold there are either the US or EU model (i cant recall which) and use the 00/retail roms. Of those 351 is the latest 00 rom.
If your innerSD is hosed how are you going to install a rom? the rom lives in the innerSD

I had a big long writeup, but the forum timed me out...
I've looked up some YT video's about how to get to the internal card
http://www.youtube.com/watch?v=6w4AbtIGp8A
http://www.youtube.com/watch?v=0f9N99gAP3w
the first video shows me where the internal SD card is located, the second shows me a cleaner way to get to it...
I need a smaller star screwdriver than what I have to get to it, even the tech guys at my work don't have a screwdriver THAT small...
but I have a few questions, I've looked some, but I don't think this kind of info is easy to find...
so, questions:
what are the size and speed specs of the internal SD card slot? logic dictates that it'll be the same as the external card slot, (32Gb class ?)
I've read that there are three slots inside, can I use all three?
if so, are they only accessed by apps like ASTRO and the like, or can I get to them via the data cable?
has anybody else done this kind of thing? is there anything I need to know?
is there anything else I can mod/tweak while I'm in there?
and, finally, how sweet would it be to get a triple calss 10 RAID 0 going on in there? I'm sure it's all but impossible, but unless I ask, how would I get to know right?

Related links:
Hardware Hacking the Streak – thread at MoDaCo, main focus is replacing the internal SD Card with a faster, larger card
How-to Increase streak storage up to 62 GB – an extension/continuation of the hardware hacking thread at MoDaCo
If your phone is still in warranty you should use it, there was a known problem with some Streaks being shipped with a bad internal SD Card.
If it is out of warranty and you choose to replace the inner card I can state from experience that you can easily get access to the card by cutting the back cover with a razor/exacto knife. There is a pic in the thread at MoDaCo that illustrates this. Of course the phone I altered was already dead and I was not able to resurrect it, so I have no way of knowing if my surgery had any ill effects.
A pic of the one I altered is attached.
Edit: the red text is right on the actual internal SD card. You move it to the left to remove it.

be sure that u kno that when u open it up u completely void all warranty, its not like flashing. YOU WONT GET AWAY WITH IT.
Happy Streaking

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A

solved!
I got two new class 10 SDHC cards, a 4G (and a 16G, for the external )
I pried it open with my fingernails, and using a T5 torx screwdriver I opened the case, swapped out the internal SD straight out of the box and closed it up.
I had streakmod 3.2.8, streakdroid 1.9.1, performed a streakmod factory reset and it just started, no formatting, no warnings, no need for a nandroid, it even used my launcherpro settings (which is strange, because someone on this thread mentioned that the internal SD card is where the ROM information goes...)
after using tools like SD booster and SD tools I found optimal speeds, and it's working good.
I expected a better quadrant score considering I went from a no name generic card to a 20x class 10, but still, it works, and for $8 it was worth it.

Related

Does class 6 SDHC card make much difference

Hey there folks.
Just a quick one here. But does using a class 6 sd card in a G1 make much difference to the running of it?
I am talking of a rooted phone using A2SD.
I currently have the class 2 8GB card that came free with the phone but can grab a class 6 one pretty cheap off ebay.
Would it make a noticeable difference?
For A2SD alone, I think it won't make a big difference, especially if your reading speed is good enough.
I have decided that I will go for a class 6 card but I have a few choices and not sure which one to go for:
http://www.play.com/Search.aspx?sea...archstring=8gb+micro+sd&page=search&pa=search
The samsung one looks pretty good.
These prices reflect very closely the ones on ebay for the same/similar products so I would probably just buy from them.
Many Thanks
philje123 said:
I have decided that I will go for a class 6 card but I have a few choices and not sure which one to go for:
http://www.play.com/Search.aspx?sea...archstring=8gb+micro+sd&page=search&pa=search
The samsung one looks pretty good.
These prices reflect very closely the ones on ebay for the same/similar products so I would probably just buy from them.
Many Thanks
Click to expand...
Click to collapse
Get any class 6 you want but if you have alot of apps class 6 would be better or if you plan on using a hero rom or something that uses swap.
Cool.
Yes I am using a swap partition and have a fair few apps too.
I have just ordered the Samsung one as it had a higher transfer speed than the trandcend one.
Thanks
i just have a quick follow up question, as i have been wondering this exact same thread topic for awhile now (hope the OP doesnt mind)
something that says "10mb ram hack" means it is using the swap function right?
and also, if i buy a new sd card, do i need to just stick it in and (if A2sd is already installed on the custom rom) it will work? ive been holding on buying one because i didnt know whether i would have to go thru the whole root process again or something
many thanks
If you already have root access, you shouldnt have to do the whole process again.
I just got my Class 6 yesterday and switched it over with no problems (running SuperD).
I did it this way and it worked fine (senior members might have a better method):
I put in the new card and booted to recovery. Im using Amon recovery. I then just did a full wipe, and then partitioned using the command in the recovery window. After that, I enabled USB access from recovery and dragged the radio, spl, and rom to the newly partitioned sd card. I flashed radio, then spl, and then the rom and all worked fine.
I did have to install all my apps again, so if your wanting to save the apps you have installed now, you might need to do it a different way. I dont even think you actuallyl have to even flash the radio and spl again if you have already done it. I just did it to be sure.
Hope that helps a bit.
Dai323 said:
If you already have root access, you shouldnt have to do the whole process again.
I just got my Class 6 yesterday and switched it over with no problems (running SuperD).
I did it this way and it worked fine (senior members might have a better method):
I put in the new card and booted to recovery. Im using Amon recovery. I then just did a full wipe, and then partitioned using the command in the recovery window. After that, I enabled USB access from recovery and dragged the radio, spl, and rom to the newly partitioned sd card. I flashed radio, then spl, and then the rom and all worked fine.
I did have to install all my apps again, so if your wanting to save the apps you have installed now, you might need to do it a different way. I dont even think you actuallyl have to even flash the radio and spl again if you have already done it. I just did it to be sure.
Hope that helps a bit.
Click to expand...
Click to collapse
thanks for the reply, that clarifies it up for me a lot. now i wont hesitate upgrading to a bigger/faster sd!
thanks!
peroxadic said:
thanks for the reply, that clarifies it up for me a lot. now i wont hesitate upgrading to a bigger/faster sd!
thanks!
Click to expand...
Click to collapse
if you are just swapping sd cards, there is no need to flash SPL and Radio again. Those are flashed to the PHONE.
easiest way to swap sd cards quickly and easily is this...
use AMON-Ra recovery
go to console-
type in switchrom
now type switchrom -s sdchangebackup <---- you can change that name, this is just for demo purposes.
once it creates a nand backup and saves your stuff you have one or two choices.
1)pull that sdcard out of your phone, put it in a card reader
2)boot into android and mount the sdcard
once that is done, drag all the files from the sdcard into a folder on your desktop named whatever you would like (mine is SDSwitch)
now turn phone off and put NEW sdcard into phone. Boot into recovery and partition it using amon-ra recovery.
put the NEW sd card into card reader and drag all files from your backup folder onto the new card.
put NEW sdcard back into phone and boot back into recovery and go to console.
type switchrom
and then switchrom -r (a list will come up if you have other switchroms you can choose them but if you want to go back to EXACTLY what you had before just choose the one you named earlier in this process)
once it restores everything, boot it up and test it out. it should be back to where you were with no problems.
it seems like a long and tedious process but it only takes about 5-10 minutes and your phone is back to normal without having to reflash a ROM and get it back to all your apps and customized stuff.
This is what you need http://tinyurl.com/ygukuan
Top of the line right there^^ you'll never need another one, trust me.
Klyentel said:
This is what you need http://tinyurl.com/ygukuan
Top of the line right there^^ you'll never need another one, trust me.
Click to expand...
Click to collapse
errrm..
you do know that isn't top of the line right?
you can get class 10 cards now
Firerat said:
errrm..
you do know that isn't top of the line right?
you can get class 10 cards now
Click to expand...
Click to collapse
Yeah I heard...but I haven't seen one, somebody else said they are too big for the sd slot on the G1....can't confirm that though, either way the TOPRAM, sdcard is the top of the line as far as Class 6 goes.
I'm running a Centon 16GB class 6 card (1GB A2SD EXT3, 96MB linux-swap) in my G1 and everything's running lightning fast.
I hope so I just ordered an 8 gig micro sd card class 6 from amazon. I have a class 4. I hope I can tell a difference. I want to run Hero Roms and from what I am reading you need the class 6 to do so.
yes, for hero roms, yes yes yes yes yes. yes and yes
palosjr said:
if you are just swapping sd cards, there is no need to flash SPL and Radio again. Those are flashed to the PHONE.
easiest way to swap sd cards quickly and easily is this...
use AMON-Ra recovery
go to console-
type in switchrom
now type switchrom -s sdchangebackup <---- you can change that name, this is just for demo purposes.
once it creates a nand backup and saves your stuff you have one or two choices.
1)pull that sdcard out of your phone, put it in a card reader
2)boot into android and mount the sdcard
once that is done, drag all the files from the sdcard into a folder on your desktop named whatever you would like (mine is SDSwitch)
now turn phone off and put NEW sdcard into phone. Boot into recovery and partition it using amon-ra recovery.
put the NEW sd card into card reader and drag all files from your backup folder onto the new card.
put NEW sdcard back into phone and boot back into recovery and go to console.
type switchrom
and then switchrom -r (a list will come up if you have other switchroms you can choose them but if you want to go back to EXACTLY what you had before just choose the one you named earlier in this process)
once it restores everything, boot it up and test it out. it should be back to where you were with no problems.
it seems like a long and tedious process but it only takes about 5-10 minutes and your phone is back to normal without having to reflash a ROM and get it back to all your apps and customized stuff.
Click to expand...
Click to collapse
Thank you, worked perfectly!!!

[Help] Eris no longer able to install apps

I droped my phone (I know :/ ) and my phone was no longer able to open apps on the sd card so I wiped and reflashed Tazz v.22 but it can't install any apps from the market or sd, just hangs on install. File manager and music along with recovery can read the SD card but the OS can't dismount it, it only force closes. This is not the first time this has happened but the only time it has had a negative effect. The back cover and battery flew across the room any ideas on what has happened or how to fix this? Everything (processor, touch screen, WiFi/3G, ect) all work :3
Try reformatting the SD card from Amon RA recovery and see if that helps. You have to use the Partition option to do so, just choose 0MB for everything unless you know you want additional partions (for Apps2SD and/or Swap). Make sure and copy anything you want to save from the SD card (if it's recoverable) first, and put it back on after reformatting if you need it back on there.
After putting whatever ROM(s) you want to reflash on your SD card, make sure and check the MD5 hash to see if it matches the MD5 hash reported by the ROM dev (ask them in their thread what it should be if they don't post it in the first post).
Thanks, I'm partitioning now and ill post how it goes
if that process doesnt work,you might try another sd card if you have one handy,just to see if its the reader or what.... you can alway take advatage of your warranty and tell em your sd wont mount, if nothing else works....
Unfortunately it didn't work. I am not sure why my SD would work for everything (Apps, and Recovery) but not the main OS and what that has to do with my phones ability to install apps to any location. I have tested: GPS, WiFi, 3G, Touch Screen, SD mounting to comp., and LEDs and they all work; This is strange. I am not sure what is "wrong", is there a way to check to see if the internal memory, or a special important place that I don't know of, is damaged or corrupted?
frosteddroid said:
if that process doesnt work,you might try another sd card if you have one handy,just to see if its the reader or what.... you can alway take advatage of your warranty and tell em your sd wont mount, if nothing else works....
Click to expand...
Click to collapse
That's a good idea; my only problem is that the water sticker just under the cover has been activated by my hand sweat back in days when I tried for hours on end to use Captainkrtek's root method. But the sticker on the battery is not activated so hmmm
Edit: I am googling my problem and will try some of the ideas out there and let everyone know how it goes
i think youd be okay... mine fell in a pool and they still accepted it for a broken sd reader over 8 months ago ...
Super woot: I fixed it; I had to delete my .android-secure folder. I still need to test other stuff but I can now istall apps for the SD card
dbnaruto said:
Super woot: I fixed it; I had to delete my .android-secure folder. I still need to test other stuff but I can now istall apps for the SD card
Click to expand...
Click to collapse
intresting....
dbnaruto said:
Super woot: I fixed it; I had to delete my .android-secure folder. I still need to test other stuff but I can now istall apps for the SD card
Click to expand...
Click to collapse
Definitely woot! Glad you figured it out.

Can I unroot without an SD Card?

The SD card slot on my phone seems to be broken. I've tried multiple SD cards and none of them seem to get read, so I've concluded that it must be the phone.
Im trying to unroot it so I can send it to verizon for a replacement. I was kind of depending on this method to do it:
http://forum.xda-developers.com/showthread.php?t=792026
but obviously I need the use of the SD card. So I'm kind of in a pickle.
Is there any other way to do it? Something that doesnt need an SD card?
The "Official" 2.1 RUU Utility (= Leak-V3) requires no SD Card
MultiUpload.com - RUU_Desire_C_Verizon_WWE_2.36.605.1_release_signed _with_driver.exe
It runs on your Windows PC.
Charge your phone well (say, > 80%)
Turn it off
Plug it in to your PC (still off)
Start the Eris up in fastboot mode (Send+End)
Run the above (HTC) utility - follow the instructions on the screen.
Thanks, man. Just ran it. Worked perfectly.
Just got to install a few apps before I take it in so that it doesn't look too barebones >_>
This is really strange. I just put in the SD card, to see if it was still broken and it magically worked again @[email protected]
I tried with the same SD cards that I used when I was rooted and they all worked as well.
I guess this means I dont have to turn it in, but this is still very strange.
McFluffnStuff said:
This is really strange. I just put in the SD card, to see if it was still broken and it magically worked again @[email protected]
I tried with the same SD cards that I used when I was rooted and they all worked as well.
I guess this means I dont have to turn it in, but this is still very strange.
Click to expand...
Click to collapse
Bummer or Not Bummer? I'm not sure. Nothing like an intermittent problem to give you plenty of confidence.
Well, if you don't take it in, at least you will get more practice at rooting.
If you want to be one of cool kids on the block, you can update the unrooted RUU (= Leak-V3) software to the July 2010 OTA using the honest-to-goodness factory codes. You might want to do this anyway, because it will install the July 2010 HTC radio, if not for the "fun" involved.
Go visit this thread:
Consolidated HTC RUU, Leak, and OTA Downloads
and grab the "4th OTA" which converts 2.36.605.1 -> 2.37.605.4; the file name is
OTA_Desire_C_Verizon_WWE_2.37.605.4_2.36.605.1_release.zip
You rename it to "update.zip", and put it on your SD card in the root folder, then:
- verify the file length and MD5 checksum (of the copy of the file on the SD card)
- charge your phone fully
- power your phone off and boot into recovery mode
(either Vol-Up+End, or HBOOT(Vol-Down+End) -> recovery)
- you will get that screen with the triangle and exclamation point; when that is showing, press Vol-Up+End again, and you will see the stock recovery menu.
- Choose the one that says something about SD:update.zip (or similar)
- Let it run through until it reboots (I can't recall, it may reboot twice).
Then, when you root this, you can take a Nandroid backup - then you will have a Nandroid backup of the July 2010 "Factory" configuration. The "cool kid on the block" part is that almost nobody has ever done this - most Eris rooters were already rooted when July 15-17 rolled around, or if they were stuck not rooted on Leak-V3, they got the OTA automatically. Very few people have actually ever used the factory recovery menu on the Eris. (I have done it just to look at it.)
Cheers
bftb0
McFluffnStuff said:
This is really strange. I just put in the SD card, to see if it was still broken and it magically worked again @[email protected]
I tried with the same SD cards that I used when I was rooted and they all worked as well.
Click to expand...
Click to collapse
Did you happen to partition your SD cards for apps2sd on a rooted 2.1 ROM and then try installing a Froyo ROM? If so, that is an explanation - (most) of the Froyo ROMs will not mount an SD card with more than one partition on it.
If this is the case, and you still want a Froyo ROM, you can backup the contents of your SD card, use Amon's Recovery to partition it again (setting the size of the ext2 and swap partitions to 0 bytes), and you should be ok. If the fact that your SD cards were partitioned was the issue...
Good catch doogald - I just assumed that this wasn't the case because the OP mentioned more than one SD card.
No, I was using a Froyo rom.
Also, I forgot to point out that it wasn't the first time it's happened. The Last time, however, I was able to get it to work again after a reboot. When I did get it to work, half the stuff on the card was missing. Luckily I had it all backed up, so it wasn't too much of a hassle.
This time, I couldn't get it to recognize the card at all, even after several reboots and trying several different cards.
But like I said, it works now. Ill probably re-root it again this weekend when I have the time. Hopefully, things work out differently this time.

Inner sd partition image needed

Hi there,
Can anyone please post a dl link to a partition image for the internal 2 Gb sd card of their Streak?
thanks in advance
I have created an image of my inner SD Card right after a factory reset.
Download Here
I created this using Clonezilla, you should be able to use Clonezilla to restore it. It is an image of the entire sd card. You need to unzip the downloaded file to use it.
Note: I am running DSC_Rom, which is Gingerbread based. I don't think it makes a difference.
ok I'll try it and post results... thank you Sir! hoping that it would work
I was thinking of getting a class 10 8gb and putting favorite music onto it under a media directory, going as it is space you can't get at as its mainly just for apps. Clonezilla is a good idea though i was gonna use carbon copy but carbon will not allow you to clone a drive bigger than the one you want to clone, seems the same with clonezilla though dam
If you are just replacing the card, you shouldn't need an image. I replaced mine and the phone took care of setting the new sd card up automatically.
Was thinking that to be honest but i wanted a way of been able to add stuff to it without the need to take the phone apart again but looks like a new card installed then just ftp into the phone to transfer but transfer speeds suck lol, will play with the image though and see what i can sort out may be able to get a similar file structure and just add a directory
lordmorphous said:
If you are just replacing the card, you shouldn't need an image. I replaced mine and the phone took care of setting the new sd card up automatically.
Click to expand...
Click to collapse
I tried putting in a replacement SD Card and it just did not show up. I tried a card with no partitions at all and one that was formatted Fat32. I did not try a factory reset after replacing the card. I have seen multiple requests for an image and now that my Streak is out of warranty I notched out the body to get access to it and figured it would not hurt to have a backup image.
a fat32 disk may not be seen the same way as ext 2,3 are linux based the first one will be a swap file then the second will be the data, I will wait till i get the card i want to install into mine, as anyone had troubles with the sides either side of the screen sticking back down, I got curious when i first had mine and took it to bits to see the micro sd card but have found one side seems to be a tad loose now
gdavies08 said:
a fat32 disk may not be seen the same way as ext 2,3 are linux based the first one will be a swap file then the second will be the data, I will wait till i get the card i want to install into mine, as anyone had troubles with the sides either side of the screen sticking back down, I got curious when i first had mine and took it to bits to see the micro sd card but have found one side seems to be a tad loose now
Click to expand...
Click to collapse
I notched the plastic over the inner sd card like in this post at MoDaCo. Seems easier than opening the whole phone up and you just have to remove the back for access.
Just had a click glance through, However I am not going to dig deep until i buy my new inner sd card then i will hit it hard, But i feel i would take a different approach to how they have tackled it as i will go down the machine code route when i do it due to the fact i am thinking i will not need to edit as much but time will tell but will post when i have installed a bigger card, also need to glue the backdoor switch down as that annoys me.
marvin02 said:
I notched the plastic over the inn sd card like in this post at MoDaCo. Seems easier than opening the whole phone up and you just have to remove the back for access.
Click to expand...
Click to collapse
I did the same exact thing, and it worked pretty good, got rid of the plastic, remove the innersd... trying to recover it with the image given.. hope it will work
Update
I received the Kingston 8 GB class 10 micro SD Card I ordered today and with no prep put it in the Streak, did a factory reset and the Streak now shows over 6 GB free in internal storage. I have no idea why this card worked and the others did not, except that they were 16 GB, class 2 cards I had laying around.
FYI - I am running DSC rom .62b (a gingerbread rom).
Does anyone have an image of the InnerSD Card that can be used in a Windows based program, such as DriveImage XML? And if not, can someone tell me how to do it manually? I'm having issues booting into CloneZilla :/
Any help is appreciated,
Cullen

[Q] "Out Of Space" even after factory reset/wipe

This the replacement streak 5 that Rogers gave me after my first one died. It came with ROM version 1.6 but would not auto update to 2.2. Market also gave me the "out of space" message. It doesn't seem to matter which way i try to load apps (downloading/install from other sources or from computer) i get the same message. If i try 2nd time sometimes they will say they are loaded but app will force close when loading.
I managed to install Steves Streakdroid Gingerbread 2.4.4 (which is wonderful, and yes i did donate) but didn't make any difference to my app installation/update problems.
I've done what i thought was a thorough search for others with this problem but have come up with only Market or cache issues. As i mentioned, this is a fresh install + factory reset and wipe.
Any suggestions would be appreciated.
How much space does your device actually show as having available?
Sent from my Dell Streak
Internal memory is showing over 60 MB
External 14 GB
So apparently lots of room on both
Thanks for the reply, hope the info helps
I have managed to load a couple of apps after a few attempts. The apps that did install and load normally installed into the external SD card and the ones that would show installed but not load didn't show up on the external SD card.
On Gingerbread where are the apps normally loaded and can this be easily changed?
I'm suprised that nobody was able to help me with this one but I managed to fix it anyway - it was the internal SD card. I suppose it was faulty or corrupted some how, so I changed it out with a new 4GB SDHD card and all is well. I ended up removing the piece of plastic that covers the internal card rather then going the complete dissassembly route.
Concestor0 said:
I'm suprised that nobody was able to help me with this one but I managed to fix it anyway - it was the internal SD card. I suppose it was faulty or corrupted some how, so I changed it out with a new 4GB SDHD card and all is well. I ended up removing the piece of plastic that covers the internal card rather then going the complete dissassembly route.
Click to expand...
Click to collapse
Can you let us know how difficult it was ??? What were the steps ??
sid81s said:
Can you let us know how difficult it was ??? What were the steps ??
Click to expand...
Click to collapse
It takes just a few minutes to cut away the plastic covering the inner SD Card. I did this to two Streaks. More info here and here.
Most of the info on changing out the internal SD card I got from this thread.
http://forum.xda-developers.com/showthread.php?t=1220021
I was planning on going the disassembly route but I didn't have the special screw driver (torq?) So just removed the small section of plastic covering covering the internal sd card. It took only 20 mins or so. A normal reboot almost worked but the Streak rebooted itself a couple of times so I did the factory reset and that fixed everything. I'm using DJ Steves Streakdroid 2.4.4

Categories

Resources