I have TnT Lite 4.4.0 on my tablet now and it is working fine with no issues. I want to install the new honeycomb OS on my tablet but I can not get into recovery mode.
I get the "Recovery Key Detected" in the upper left corner of the screen while the VS Birds logo is on the screen then it got to the next screen w/ gtablet logo, then a black screen loads with a box and status bar, then NOTHING it resets.
Any ideas?
Here are two ideas to consider:
1) are you trying to enter recovery from a powered off state? And are you sure you are holding the volume Plus key and pressing power? When i first got the g tab, I was messed up by the volume Plus and minus keys.
2) while fully booted into your ROM, can you connect to the tablet with ADB? if so, you can use the "adb reboot recovery" command.
Hope this helps.
djab67
(If I have helped, please hit the "Thanks" button)
[GUIDE] Restore G Tablet after a Failed Recovery Mode "update.zip"
Related
I am running cyanmod 7 and it works ok.
I am trying to upgrade to flashback. I hit the power button and + volume at the sametime. I see text saying detect a recovery key was presses. Then it says booting a recovery image and the screen goes black. The grab is off.
I tried placing clockworksmod8 the internal and external sdcards and tried the power + volume and the screen goes black I had on the gtab and I don't know what happened to it).
I tried running nvflash but it tries to install and apx driver and goes into a found new hardware loop.
What do you suggest I try next?
Is there a Recovery option when shutting down from the menu?
So I installed this ROM (http://forum.xda-developers.com/showthread.php?t=1200985) a few days ago w/o much trouble. Today I updated the ROM to version 2.4 (first used wipe.zip and then the rom). When I rebooted my tab I got stuck at a bootloop (the ROM's logo keeps showing up) and it seems I'm unable to get into recovery.
AFAIK, I should get into recovery by pressing the VOLUME UP & and the power button simultaneously, but nothing happens when I do this. Getting into fastboot isn't a problem, but I just can't seem to get into recovery mode.
Can I access my recovery menu through the fastboot via the SDK manager? Did I use the correct buttons to get into recovery?
Thanks in advance
You should push on both Power Button and Volume Down buttons. Right after the Samsung logo shows, you will see two menus, let go of both buttons immediately and choose your recovery boot. i hope this will help your problem
My Verizon GS4 won't boot up unless I hold the VOL- and Home button. This wouldn't be a problem if I could boot into Download mode, however I cant. VOL+ Key doesn't work because I dropped my phone, and it says in small blue letter in top left corner of the screen "Recovery Booting" when I don't hold the VOL- and Home button when booting. Please help I cant root or install custom recovery or rom!! I need to downgrade my current firmware but can't do that without download mode. Thanks for the support!
joseph.walker.samuel said:
My Verizon GS4 won't boot up unless I hold the VOL- and Home button. This wouldn't be a problem if I could boot into Download mode, however I cant. VOL+ Key doesn't work because I dropped my phone, and it says in small blue letter in top left corner of the screen "Recovery Booting" when I don't hold the VOL- and Home button when booting. Please help I cant root or install custom recovery or rom!! I need to downgrade my current firmware but can't do that without download mode. Thanks for the support!
Click to expand...
Click to collapse
if you can boot into the rom then you need to setup adb
http://forum.xda-developers.com/showthread.php?t=2317790
once you have adb configureded and have a shell running type "su" then "reboot download" into the shell
if you don't already have root you are pretty much screwed until you get the button repaired
HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset
Hello! i don't know how but my rooted Mi A3 last night decided on its own to update to Android 10. So i woke up with all of mine Magisk magic all gone. I tried to root again but my phone is stuck on the 'Mi' boot screen.
So here's the situation:
if i press volume up + power button, instead of entering recovery mode the "no Command" screen shows up;
if i try to fastboot, my pc doesn't recognize anymore my device;
There is any another way to enter recovery mode? Can i flash a boot image on a sd card? Do i have to throw away my beloved xiaomi?
You have most probably incompatible Magisk module which prevents phone from booting Android 10. Flash stock boot image to get phone working (fastboot should work, double check your drivers etc.).
Or perform factory reset from stock recovery:
"If presented with an image of a broken Android with "No Command" shown on the screen, do the following:
- Press and hold the Power button.
- While holding the Power button press the Volume Up button then release the Volume Up button then the Power button."