So i had to get warranty on my old atrix. They sent me one with 2.3.4 on it. Is there any way to unlock the bootloader from stock 2.3.4 or at least getting root without a sd card ( i used gladroot before)? Thank you for any assistance.
http://forum.xda-developers.com/showthread.php?t=1182871 works pretty well.
Related
http://www.htc.com/us/support/t-mobile-mytouch-3g-slide/downloads/
I got this today in a sms from t-mobile... I guess they did not give up after all.
Would it be safe to install this without losing root or S-OFF?
You will lose root and S-OFF after flashing the official froyo. You can still re-root your phone, but you will lose S-OFF permanently.
So their is no way to get s-off again when you do the official update?
Well yes u can re root but that's the prob the oknly to do it not is the old hard way make a gold card abd if u don't have a sd or micro sd reader well u can't root so yea don't update unless u want to work for reroot
and yeah, as far as now, nobody has cracked the method to obtain S-OFF. so until then you'll be stuck with S-ON.
the new HBOOT that comes with Fro-Yo cannot be engineered to be S-OFF (for both Legend and Slide). You can root again but you need to make a goldcard (which requires a microsd card reader)
So don't do the official update, you will gain nothing at all. Just flash the new radio (been on the forum for a while now) and flash the rooted version of the official update (or any other ROM since the stock T-Mobile version sucks a lot)
Yes well ty uber but already stated 2 post up lol
This is pretty old news lol
Sent from my GT-I9000 using XDA Premium App
To install the update, do we just plug our phones in (with dev enabled) then run the exe file?
I'm looking to update my friend's phone and they aren't savvy enough to put root access to good use and rather keep things simple and stock.
So I started with an official 2.2.2 firmware from Bell. I think this thread might serve 2 purposes, because I had a really hard time figure out all the steps from start to finish as they were in separate threads. So if someone starts off with stock 2.2.2 and wants to get a custom rom, that's the way I manged to do it. Second purpose of this post is for me to find out how I could return my Bell Atrix to stock OTA and what it would imply. Thanks a lot in advance for your inputs.
-I rooted with SuperOneClick
-Unlocked BL with
http://forum.xda-developers.com/showthread.php?t=1136261
-Installed Tenfar's CWM
http://forum.xda-developers.com/showthread.php?t=1138541
-Verified which kernel to use D00 or 1100 and dled it:
http://forum.xda-developers.com/showthread.php?t=1169409
-Then I flashed Alien Rom Build #2 with Tenfar's CWM:
http://forum.xda-developers.com/showthread.php?t=1186537&highlight=bell
-Then tried to do the D00 Intl kernel in CWM without rebooting, that didn't work ... so I rebooted and went directly to fastboot and installed the kernel as the instructions say in the link:
http://forum.xda-developers.com/showthread.php?t=1169409
-Then booted for the first time, rebooted, and flashed the ninja theme in CWM
What I want to know is if ever I wanted to go back to stock with the new GB OTA from Bell 0.37.23 what would it imply:
-Rooting is still available, but is unlocking ? and could I still unlock the APN menu.
-My BL would get relocked? What would that imply for future updates.
Also if I decided to take that route; I would
1) http://forum.xda-developers.com/showthread.php?p=15975211#post15975211
2) Download the new OTA and install
3) Root and unlock...
Thank you for you input,
NiK
You just install the gobstopper. There is no new bell gb OTA from my understanding. Only the new ATT gb ota.
The gobstopper puts you on full 2.2.2.
Thought the latest OTA was for GB .. oh well ... what you be the implications of going back to stock ... would that affect the unlocked BL, would it relock it, would it make future mods more difficult of impossible .... I come from iPhone world so updating a firmware would have a lot of future implications ...
yes gobstopper would put you back to stock 2.2.2 and re-lock the bootloader...so yes you would have a boring ass atrix again...the only time (personal opinion) i would ever revert back is for warranty purposes. This way they can't tell you f'ed with your phone.
and yes it would make future mods impossible....basically all the mods and stuff out there right now would be useless to you...in fact if you did want to mod your phone you would only be able to deodex and theme..with a few other tiny modifications...that aren't even supported by the dev' who made them anymore because everyone is using GB now lol...i'm not sure why anyone would want to go back except for warranty purposes or they are selling to someone who is new to android and doesn't want to hack their phone...
/rant
cheers bro =)
J-Roc said:
yes gobstopper would put you back to stock 2.2.2 and re-lock the bootloader...so yes you would have a boring ass atrix again...the only time (personal opinion) i would ever revert back is for warranty purposes. This way they can't tell you f'ed with your phone.
and yes it would make future mods impossible....basically all the mods and stuff out there right now would be useless to you...in fact if you did want to mod your phone you would only be able to deodex and theme..with a few other tiny modifications...that aren't even supported by the dev' who made them anymore because everyone is using GB now lol...i'm not sure why anyone would want to go back except for warranty purposes or they are selling to someone who is new to android and doesn't want to hack their phone...
/rant
cheers bro =)
Click to expand...
Click to collapse
Hi,
That is incorrect. Once you are unlocked, you are always unlocked. You either have a bootloader that knows what unlocked means or you don't.
In this case you can always go back to IHOP to be unlocked. There is no permanent relock.
The point in going back to stock is to get OTA updates from Bell, not warranty claims because if you can get back to stock you don't need a warranty. It's when your phone is locked up that you want to use your warranty and by then it's too late.
Cheers!
Ok so once the bootloader has been unlocked, whatever happens I can't relock it even when applying an OTA upgrade that upgrades the bootloader ? That sounds like the exact opposite of what happened with iPhones or PS3s or whatever electronics that needed to be jailbroken, unlocked of whatever.
NiKTaMeR said:
Ok so once the bootloader has been unlocked, whatever happens I can't relock it even when applying an OTA upgrade that upgrades the bootloader ? That sounds like the exact opposite of what happened with iPhones or PS3s or whatever electronics that needed to be jailbroken, unlocked of whatever.
Click to expand...
Click to collapse
A fuse gets blown in this case. oem lock does nothing.
What you can do is install a bootloader that doesn't know about unlocking or that that paticular fuse means it's supposed to be unlocked, So the unlocked message doesn't show up on the main screen during boot and fastboot no longer works for signed partitions. However, restoring the unlocked bootloader restores the unlock by checking the blown fuse, and oem unlock no longer has to be done.
Cheers!
Thanks a lot to everyone for your replies.
P.S NF I'm waiting to try your gobstopper 2.3.4 stupid slow upload speeds
NiKTaMeR said:
Thanks a lot to everyone for your replies.
P.S NF I'm waiting to try your gobstopper 2.3.4 stupid slow upload speeds
Click to expand...
Click to collapse
It's done if you were waiting.
Sent from my MB860 using XDA Premium App
I installed the Bell Gingerbread OTA update and not I have the Fastboot menu on the phone boot.
It does not say that the phone is unlocked.
Do I have an unlocked bootloader? Do I need to do something else to get it unlocked (IHOP?)? Is there a guide for it?
If there isn't unlocked on the startup, the bootloader doesn't unlocked.
Guide: http://forum.xda-developers.com/showthread.php?t=1136261
The Gingerbread update only gives you "Gingerbread". You still need to manually use IHOP to unlock the Bootloader...
Sent from my GT-I9000 using xda premium
my phone B/L is already unlocked. Will it be safe to flash this ROM via SD card?
Hi guys! I have a couple of questions. I just updated my Atrix to 2.3.4 by OTA update, so i created a brickable device, haven't i? I would like to know what i have to do know, i want to root the phone and unlock the bootloader to install custom roms, but im afraid to brick my new phone. I have read a lot the past two hours, but im still not sure about what to do now in order to unlock the phone and achieve root.
Also, the device will brick if i try to flash any 2.2 rom, no matter how i flash it (via CWM for example)? Or only if i flash a 1.8.3 SBF via RSDLite? Are there any other files that i have to avoid if i don't want to brick my phone?
Thanks for helping me out guys!
djluis48 said:
Hi guys! I have a couple of questions. I just updated my Atrix to 2.3.4 by OTA update, so i created a brickable device, haven't i? I would like to know what i have to do know, i want to root the phone and unlock the bootloader to install custom roms, but im afraid to brick my new phone. I have read a lot the past two hours, but im still not sure about what to do now in order to unlock the phone and achieve root.
Also, the device will brick if i try to flash any 2.2 rom, no matter how i flash it (via CWM for example)? Or only if i flash a 1.8.3 SBF via RSDLite? Are there any other files that i have to avoid if i don't want to brick my phone?
Thanks for helping me out guys!
Click to expand...
Click to collapse
After you unlock the boot loader, do not flash any sbf prior to 4.5.91. In fact after you unlock the boot loader, there's no need to flash a sbf at all, b/c you can just flash a fruitcake to return to stock.
As far as picking a ROM, it doesn't really matter... any ROM that requires a unlocked boot loader (which they all do), it is at least based off of gingerbread Android 2.3.4+
Use the pudding unlock sbf to unlock your boot loader. Most rooms include root. See my sig for further info.
Sent from my CM7 Atrix 4G
Swiftks said:
After you unlock the boot loader, do not flash any sbf prior to 4.5.91. In fact after you unlock the boot loader, there's no need to flash a sbf at all, b/c you can just flash a fruitcake to return to stock.
As far as picking a ROM, it doesn't really matter... any ROM that requires a unlocked boot loader (which they all do), it is at least based off of gingerbread Android 2.3.4+
Use the pudding unlock sbf to unlock your boot loader. Most rooms include root. See my sig for further info.
Sent from my CM7 Atrix 4G
Click to expand...
Click to collapse
Thanks for your fast response! So, if i use the auto-unlocker on that thread, it wont brick my device right? Thanks for pointing me that, it seems very usefull. Now, this leads me to the next question, i also have to SIM Unlock my Atrix, because its locked to ATT and im trying to use it outside the US, so i need to SIM unlock it, i have seen several threads of users reporting problems SIM unlocking the phone, should i wait for the SIM Unlock code before proceding to unlock the bootloader? I have already ordered one, the guys should email it any time now, it will take less than 24hrs, and no less than 2hrs (which have already passed).
Thanks for your answers guys!
EDIT: Couldn't resist, unlocked the bootloader and achieved root. It was super easy with the automated batch. I hope i don't run into problems when i try to SIM unlock the phone lol
Hello,
I have a rooted Atrix, running Neutrino's rom, but my SD card became corrupted somehow, and I've now lost my nandroid backup to my stock ROM, before I rooted I was on T-Mobile-UK android version 2.2.3
Am I now safe to use the latest SBF T-Mobile UK GB 2.3.4(4.5.2)
I also understand this removes the Unlock screen from the bootloader but the fuse remains popped inside the unit, what about the actual state of the bootloader do I need to use fastboot to unlock it again.
Cheers
Jonnyw2k