I don't speak English so please use you imagination.
I flashed my phone with KPN. The good new is that until now I haven't had any SOD. The bad news is that while de wifi works, I need to turn it on and off if I leave one net and go to another.
Also have problems with bluetooth. I can't make my motorolas S9 to work properly. After pairing, the phone sometimes asks me again for the pin number every time I try to connect the headset to it. Sometimes the phone makes the headset turn off and other times only connects the phone sound but no the multimedia sound. I think it have something to do with the order I turn on the devices. The headset only works if I pair them again.
I know it not a problem with the headset because it works with my other phone and it worked before the flash.
Thanks.
cognositivo said:
I don't speak English so please use you imagination.
I flashed my phone with KPN. The good new is that until now I haven't had any SOD. The bad news is that while de wifi works, I need to turn it on and off if I leave one net and go to another.
Also have problems with bluetooth. I can't make my motorolas S9 to work properly. After pairing, the phone sometimes asks me again for the pin number every time I try to connect the headset to it. Sometimes the phone makes the headset turn off and other times only connects the phone sound but no the multimedia sound. I think it have something to do with the order I turn on the devices. The headset only works if I pair them again.
I know it not a problem with the headset because it works with my other phone and it worked before the flash.
Thanks.
Click to expand...
Click to collapse
Hey!
Thx for you effort, can you post you problem HERE!
TIA!
CHEERS!
Related
When I am playing music and I receive a call, after the call ends the bluetooth connection just disconnects. I have to press the play button on little necklace for it to connect again. Anybody have experience with this headset? My last sony headset, DR-BT30Q, works just fine. My current one that I just ordered, the HBH-DS980, plays fine, but it just disconnects after a phone call.
I searched this forum and "HBH-DS980" didn't pull up any matches. I read in the Kaiser forum some ppl installed some jetware software. I would like to get some input with Mogul owners though. Oh yah, I'm running DCD's 2.1 rom based of 3.16.
WOOT. After installing Jetware mobile, I am not getting a drop after a phone call anymore. Now I'm starting to love this headset.
http://www.jetwaremobile.com/index.htm
Do you get phone book on the headset ?
I'm not sure. I have to check back. But today, after resetting my phone, I am still getting the drop after a call. I have to press the play button and it connects right back up, but still annoying.
I do know I get the call list so that I can make a call.
yes, the contacts work.
Wow, I can't get the contacts to work
You have Mogul /Titan as well ? Any special steps you did to get it working ?
Same problem here with the phone call disconnect
Meh, I assumed they work. Earlier my PPC said allow HBH-ds980 to get contact info, or something like that, so I thught it worked. Now It doesn't do anything. I've found this Bluetooth headset works sometimes and doesn't work at other times. Sometimes off a fresh restart on my PPC it will not drop the connect, most other times it will.
Hi,
A couple of weeks ago, MW600 was working as expected. But at the moment, I've got connection problems. Is anyone experiencing anything similar, or do you have any tips?
I have tried restarting both the phone and the MW. The radio function works perfectly. I have tried renaming my phone.
Here's what I'm doing:
* Turn on MW
* Turn on bluetooth on phone
* Search for units -> pair the two units using code 0000 (starting from scratch, just in case)
* Phone states that MW is connected to phone and media sound
* If mediascape is playing, I hear ~1 second of media sound
* After 1-3 seconds, MW makes a sound (5 descending tones) -> the phone briefly states that MW is connected to media sound only -> the phone goes back to stating that the two units are paired (no connection)
What do you think?
Mine doesn't do that, so it's quite odd.. Do a full reset of the MW600 (manual here: turn off, press and hold down power until pairing indication appears, press power and call buttons simultaneously until headset turns off), delete it form the phone and try again. There's no reason for it to do that.
I found the battery life to be a bit short....10 minutes of streaming music and it shut off, all this after overnight charging.....I have repeat this 'issue' Friday night, Saturday and Sunday only to have MW600 dead at the office now
My runs 12-15 hours! Without any Problems.
Same, I can use mine for at least 4 days (about one and a half hours a day) before it needs recharging - are you using the right charger?
sergiu84 said:
Mine doesn't do that, so it's quite odd.. Do a full reset of the MW600 (manual here: turn off, press and hold down power until pairing indication appears, press power and call buttons simultaneously until headset turns off), delete it form the phone and try again. There's no reason for it to do that.
Click to expand...
Click to collapse
Thanks for this suggestion. A full reset solved the problem.
murmeljenta said:
Thanks for this suggestion. A full reset solved the problem.
Click to expand...
Click to collapse
Hi, how to perform it? I don't understand when I have to press call + power buttons!
Alleniv said:
Hi, how to perform it? I don't understand when I have to press call + power buttons!
Click to expand...
Click to collapse
You press the buttons on the MW600 itself, not on the phone. Read the manual that I linked to, it's all in there.
hmm anyone else have problem with the ringtone playing thru the mw600? when the phone rings. i can hear it ring on the bt headset. but it's like play a bit.. then i hear a beep.. then it plays a bit more.. and beep it's like intermittent
The beep means, that the headset is changing from the mediamode to the telephonemode.
Update... The problem above came back. If seems related to using bluetooth and wifi simultaneously. Whenever I'm using BT and enable wifi, BT gets a lot of problems and usually shuts down. Does this happen to anyone else?
Also, in the past I could use the buttons on the headset to change songs etc. That doesn't work anymore, even after resetting the headset etc. Is anyone else experiencing this?
-------------------------------------
Sent via the XDA Tapatalk App
I have problems with MW600 too.
Sometime stays connected for hours and sometime is disconnecting 3 times in 5 min.
I have wifi on 24h/day so, i didn't test without wifi.
i only get disconectet when i try to make a call ... looks like ist sw issue on the x10 since the mw600 dose not make this on other phone .. but that is an nother problem then you have.. BUT !!! i hade the exact same problem includet to what i have now befor i updatet the x10 to the .16 version
edit: my problem is solved. needet to reset it 2 times befor it workt
murmeljenta said:
Thanks for this suggestion. A full reset solved the problem.
Click to expand...
Click to collapse
Update... Problem keeps coming back. My supplier suggested that BT and wifi might interfere. I'd be very surprised if a "smartphone" cannot play music over bluetooth and surf using wifi at the same time. My supplier promised to check it out and get back to me... That was ~2 weeks ago.
Is ANYONE else experiencing the same problem? Can you listen to music over BT, then enable wifi, connect to a network, and keep listening to music over BT?
murmeljenta said:
Update... Problem keeps coming back. My supplier suggested that BT and wifi might interfere. I'd be very surprised if a "smartphone" cannot play music over bluetooth and surf using wifi at the same time. My supplier promised to check it out and get back to me... That was ~2 weeks ago.
Is ANYONE else experiencing the same problem? Can you listen to music over BT, then enable wifi, connect to a network, and keep listening to music over BT?
Click to expand...
Click to collapse
I have wifi on 24h/day and most of the time i don't have any problems but sometime they get disconnected and i have to turn off/on BT and everything runs fine after.
I will have to try without wifi
Bluetooth and Wireless LAN (WiFi) both uses the same frequency space (~2.5 GHz)
Most of the times Bluetooth should be smart enough to adjust the frequency to co-exist with WiFi devices.
If your area are crowded with other Bluetooth devices and WiFi access-points, the Bluetooth set might having trouble settle on one quiet frequency, and might just sit there trying to switch frequency all the time, never finding a good frequency to settle on.
To help those poor Bluetooth devices along the way, try to change the WiFi access-points channels to create a free channel where the Bluetooth devices can settle on.
Also check if your WiFi access-points have a "Co-exist with Bluetooth" option, and enable it. It will however reduce the frequency-width and therefore the bandwidth slightly on the WiFi, but Bluetooth devices should work with less interruptions.
Connection problem with s60
Hello!
I have an MW600 as well - using with an s60 symbian nokia (6650 fold).
It works corectly when using in bt mode and listening music from the phone, but it alwways lost connection when turm the handsfree to radio. When listening radio, zthere is no connection, no way to get the calls or answer.
Do somebady have the same problem or somebody know how to solve it?
I did reset on mw600 and paired again, but i have the same problem.
รก
i haven't had any problems with my MW. i always stream music from my pc via wifi to my X10, then to my MW via BT, witch is connected to a Reciver for party.
have you tryed restarting your MW after pairing.
My problem with this headset is that it doesn't:
1) caller name not displayed on incoming calls
2) Music/Mp3 tags not displayed on lcd (using Poweramp)
3) why does the phones itself rings not the headset just some beeps. Embarrassing when phone rings and then answer on headset.
Resetted but not solved any problems.
Wildfire running Wildpuzzle 0.8 with kernel 4.1 overclocked
Ok I m using mw600 stereo bluetooth headset with CM 6.1.3 V4.4 rom for 2 days now. The pairing is easy but the issues that I am facing are;
* phone has crashed/rebooted couple of times while pairing/ unpairing.
* besides first fact, it pairs without any problems and very easily.
* I have used it with mixzing and doubletwist media players. In both cases the music lags and sometimes the lag/pause is about 2-3 seconds long.
* incoming call shows phone number only, no contact name.
* voice dialing works.
* when I m listening to music or not listening to music on incoming call the headset converts to phone mode fine but after the call is finished, the headset doesnt reverts back to media mode that is, the music doesn't plays again and I tried connecting and disconnecting again but only way to make it work again is restart the headset.
* battery is so far ok for the headset. Infact I runned out of my phone battery while I was trapped in underground and listening to music.lol
* even the headset is connected, if I play youtube video, the sound comes from the phone speaker. In order for it to come from headset I have to play some music from using my headset controls and then play the video and then pause the track. This also happens with music app aswell sometimes. Like the headset is connected and if I play the song using my phone, it will play through phone speaker and I have to pause it and play it using my headset controls in order to listen through my headset.
So far its oki but its annoying the laggy music thing. It only occours in music playback, I spoke to my mate on phone for couple of hours using this headset and both ends could listen loud and clear.
i also paired it with my inspiron duo tablet and its working flawlessly....so anyone have any work around of the above mentioned problems? anyone facing the same problems? is it because i am using custom ROM? i am ok with the headset not showing song tags and stuff but music being laggy is not acceptable...because thats what i bought it for!
Any help would be much appreciated?
thanks
Hi,
I have the following problem:
Everytime I pair my Samsung Galaxy SII I9000 with my car (Renault Fluence 2012) and its built in bluetooth System, it says that it's correctly paired (and honestly it doesnt even take a minute to pair correctly), but it plays no music. It just has no sound (even when the song is playing correctly on the phone) but everything else just works perfect. I mean, i can control the music (songs, playlists, etc) from my car, but the sound just wont come out. The only way to make it work is to 'unlock' the sound by calling someone. So when the call starts, then the audio starts working. That is, so far, the only way to make it work. And i have to do it EVERY SINGLE TIME that i turn on the car or that the device stops being paired with my car.
It does EXACTLY the same thing with my bluetooth headphones (Motorola S305), so I realized it was my phone. I have tried other phones with my car and they work just fine. I have tried other things with my headphones too (like my Psvita) and they work smoothly.
The weird thing about it, is that my phone used to work perfectly fine with both things, and just a random day it decided not to work anymore.
I used kies and re-installed android from 0, and that solved the problem for a few days and then it all started again. I have tried cleaning all the bluetooth devices that my phone is paired with. Going back to factory settings in my car, removing the battery on the phone, resetting the phone, taking everything out (including the sim card( everything. And nothing seems to work.
Please, help!
My phone is a Samsung Galaxy SII with Android 2.3.6 (it came with 2.3.3 and i upgrade it twice through kies) I have never rooted my phone or done anything to it, except for upgrading Android through Kies.
Thanks so much!!!
Pirithous said:
Everytime I pair my Samsung Galaxy SII I9000 with my car (Renault Fluence 2012) ... it says that it's correctly paired ... but it plays no music. It just has no sound ... but everything else just works perfect. I mean, i can control the music (songs, playlists, etc) from my car, but the sound just wont come out. The only way to make it work is to 'unlock' the sound by calling someone. So when the call starts, then the audio starts working. That is, so far, the only way to make it work. And i have to do it EVERY SINGLE TIME that i turn on the car or that the device stops being paired with my car.
It does EXACTLY the same thing with my bluetooth headphones (Motorola S305), so I realized it was my phone. I have tried other phones with my car and they work just fine. I have tried other things with my headphones too (like my Psvita) and they work smoothly.
Click to expand...
Click to collapse
Wow... That's very strange. First off, I'd be looking at compatibility issues. Do you have the BT specs for the car? Maybe they're the same as the headset and not quite 100% compatible with the phone.
Another possibility (although remote) is that the headset and the car are fighting over which gets to talk to your phone because phone services are much different than A2DP (Audio).
You might just have a flaky BT antenna in your device, or a bad (stock) modem/baseband.
I'd try rooting and see if a different modem/baseband clears up the issue. Then at least you'll know what the deal is.
Hey, I also found this on the Renault web site... http://www.renault.co.uk/bluetooth/default.aspx
>> Why does my telephone not reconnect to the system when the vehicle is started?
- In order for your telephone to automatically connect when the vehicle is started, it may be necessary to activate the automatic Bluetooth connection function on your telephone with the hands-free kit. For details on how to do this, please refer to the instructions manual for your telephone.
- Upon reconnection and if there are several telephones paired within the hands-free kit reception area, it is the one that was paired last that will be connected even if it is outside of the vehicle.
So it looks like it might actually be a Renault AND a Motorola problem.
There's also a list of compatibility files at the bottom of that page based on the system you have.
First of all, thanks so much for your help.
The problem with whats going on with my phone, is that it used to work just fine before, with those 2 things (my car and my headphones) Its not like they never worked, they used to work completely fine with my phone.
And i never use them together, like my headphones have never even come close to my car. And since i thought that it could have been a problem with they 'fighting' with each other, even if they werent close, i erased all the cache on my bluetooth settings and unpaired all devices that were ever set with my phone.
So its like if i had never used bluetooth. That obviously didnt work either
It turns out that your car likely keeps up to 5 phones in memory... Is there a way to clear the phone list in the car as well? Then re-pair from scratch on both sides?
well either the blueth is defect or ur doing some wrong settings,root ur device there r plenty of bt apps tht work more powerfull than the default...y possible ur car mus hav a reset buttun for bt so delete all pairs frm phone an reset ur car bt,,,,then start fresh.....hope it helps
I restored my car's settings and deleted every phone paired. That didnt work either... I also tried with a friends phone (iphone 4) and that worked completely fine...
Pirithous said:
I restored my car's settings and deleted every phone paired. That didnt work either... I also tried with a friends phone (iphone 4) and that worked completely fine...
Click to expand...
Click to collapse
Time for a warranty replacement I think.
Jeez... thats exactly what i was trying to avoid, because my cellphone company will have me waiting for like a month without my phone and will give me in return the ****tiest phone ever while they try to fix it and then realize they cant.
FML
thanks anyway for your help!
Sorry if anyone has posted this before...
I have a problem and I've been trying to solve it but after months of frustration I have decided to try the experts here. Maybe I someone can help.
I don't know when this all started, but for some reason whenever I connect my phone to my car audio (stock system from Toyota) via Bluetooth I can't use Google voice commands. OK Google gets picked up but after that nothing gets recorded. Just Google waiting for me to say something. I tested SVoice and that works fine, so my only thought is that Samsung has done something.
When I disconnect, the problem persists until I turn Bluetooth off.
I have managed to get it working if I use Google to turn on Bluetooth, but then all phone called go to speaker on the phone. When I connect to Bluetooth to use the steering wheel controls, problem come back.
So, hope that was clear and thanks in advance for any help!
Asked a question a while back about the issue with Bluetooth audio cutting back to the phone speaker, is there a fix out for it yet? If not, do Huawei know about the bug?
Thanks
Original post text below.
I have this little problem with my new Huawei.
(I have a Mate 10 Pro, couldn't find a section for that specific model)
Whenever I connect it to my car or Bluetooth headphones, the audio from my phone will randomly switch from my car speakers or my headphones to the phone speakers. The only way to get it outputting audio through the Bluetooth device again, is by reseting my Bluetooth connection. However, it does this every time and its driving me insane.
Can someone help me with this? Thanks in advance.
Click to expand...
Click to collapse
My mate 10 pro have terrible bluetooth problems with my earphones, sbc low quality and very noisy. Acc totally broken.
Hxxli said:
Asked a question a while back about the issue with Bluetooth audio cutting back to the phone speaker, is there a fix out for it yet? If not, do Huawei know about the bug?
Thanks
Original post text below.
Click to expand...
Click to collapse
Can't help with a solution I'm afraid but I get the same on BLA-L09 C782, firmware 131. It sometimes refuses to connect to anything until I switch into airplane mode and back.
Other times it will connect fine then switch to loudspeaker almost immediately - even though bluetooth still says it's connected (and the play/pause button works on the device). It seems fairly random and reconnecting a few times gets it to work for a while, but it's annoying when it happens while driving.
My guess is that it's an audio routing issue, so most likely a software glitch.
Has anyone switched to a treble rom and still finding the problem? Or has anyone noticed it has gone with a later firmware update?