hey folks,
although i'm aware of several threads regarding cwm, my question is little bit different. hopefully I've not overseen something and it's ok to ask (again?):
just trying to flash cwm in order to be able to flash an alternate black status bar, but i'm on 351 and only found cwm recovery imgs for 345. isn't there a difference?
downloaded cwm 2.5.0.7. can I use the contained recovery file?
re-installed everything at the beginning of the week. if possible it would be great not to have to start from scratch again ...
thanks,
marc
crd_x said:
hey folks,
although i'm aware of several threads regarding cwm, my question is little bit different. hopefully I've not overseen something and it's ok to ask (again?):
just trying to flash cwm in order to be able to flash an alternate black status bar, but i'm on 351 and only found cwm recovery imgs for 345. isn't there a difference?
downloaded cwm 2.5.0.7. can I use the contained recovery file?
re-installed everything at the beginning of the week. if possible it would be great not to have to start from scratch again ...
thanks,
marc
Click to expand...
Click to collapse
I think you'll be fine with that one. Is there a reason you don't want to use Streakmod? I find it superior to clockworkmod for our devices in almost every way. Worst case scenario if you flash that one is you won't be able to boot into it. If that happens, flash a different one. Have you seen this thread? It has an easy to use tool for flashing lots of recoveries.
http://forum.xda-developers.com/showthread.php?t=1000455
will look into it tomorrow. in order to update minor things like the status bar and keep the stock image, which method would you choose?
hm, flashed cwm 2.5.0.7, but that didn't work. when trying to enter recovery i only get a blank screen
edit: fail - rebooted the device and the stock recovery appears.
http://forum.xda-developers.com/showthread.php?t=1047345
that worked. flashed streakmod successfully and applied gingerkrad351. only thing that's missing are white icons, but so far overall success!
Related
SOLVED it myself - read below:
The super quick version:
During an attempted downgrade from 02 2.1 6941 (it was buggy as hell) back to ATT 1.6, I tried a method someone posted involving clockwork 1.8.1.7. Unfortunately, clockwork can only burn .zip clockwork formatted roms (you cannot simply rename a pkg a zip). All attempts to switch back to any other recovery program simply resulted in a black screen after selecting update - many recovery roms were tried. So I was stuck with no way to even try to burn a regular pkg rom and a broken clockwork (1.8.1.7 "works" but with errors).
TLDR: Black screen after "press camera button to update" on all recoveries except clockwork 1.8.1.7 on 02 1.6 4399.
Solution:
Installed clockwork formatted rooted 4399
Installed older recovery rom I found
I can provide links to these later. I don't have them on me at the moment.
If anyone has any idea how to solve FOTA name mismatch, or even wtf it means, let me know.
WOuld be great if u could tell the forum what u did
You may not be alone
r00tcause said:
Solved my own problem after hours of trial and error - no thanks to anyone here.
Click to expand...
Click to collapse
The Streak community seems to be pretty small at this time. Until we have a bigger user base we are all kind of breaking new ground. People might not have had the same experiences as others, such as yourself, so maybe you could share your story and help someone in the future.
drgopoos said:
WOuld be great if u could tell the forum what u did
You may not be alone
Click to expand...
Click to collapse
I was busy raging at the time.
I am *still* stuck on o2's OS (but 1.6 which works fine instead of the seriously bugged 2.1, which worked "ok" at first and got so buggy that it wouldn't allow me to answer incoming calls) but at least my recovery is no longer broken.
I can't swap back to ATT though due to a "FOTA name mismatch", whatever the hell that is.
The black screen recovery error seems to be caused by the ROM itself. Certain recoveries simply do not work on certain builds. It seems as though pretty much all of them failed with the build I had. However, I found an older recovery (smaller than the rest at 2.7mb) and used that along with a rooted ZIP format (clockwork) version of 4399.
It was really just about finding the right files and the right combination.
I hope I can upgrade to the ATT froyo when it gets here without issue. For now, I am staying with what works.
Download the attached recovery, flash it and you should be able to update any official rom.
crash6 said:
Download the attached recovery, flash it and you should be able to update any official rom.
Click to expand...
Click to collapse
**I looked through my recovery roms and I had already tried THAT EXACT ROM, so perhaps stop making assumptions, eh?**
The only recovery that worked was the 2.7mb one. I tried many others. They all resulted in a blank/black screen after selection.
The files I used to fix the issue are linked below.
The first is a zip/clockwork version of O2's 4399 build which clockwork can burn. The second is the stock 4399 recovery (2.7mb).
4399-update-streak-stock-rooted-signed-clockwork.zip - 80.1 Mb
recovery.stock4399.img - 2.7 Mb
*This fixed the black screen on all recovery roms except clockwork 1.8.1.7 issue. It won't do a thing for FOTA mismatch.
No, I'm not a (complete) noob to this, but I have a few questions...
1) It seems like more times than not, I can't get something to flash properly with CWM, it'll get to "Installing update" then it just freezes on that forever (the loading bar has the \\\\\\\\\\\ that just stays like that). Am I doing something wrong?
2) I recently flashed the newest version of the Dark Side ROM and all seems to be running smoothly except the stupid new D3 Camera, it won't open. I've seen other people have problems with this, but not for this rom. I've tried flashing the D3 camera separately and even the stock camera but I keep having the issue listed in the first question.
I know there are a thousand other people who have asked this, but I can't get the stupid thing to work. Help would be greatly appreciated!
What/Who's version of CWM are you using first of all?
Tenfar's CWM (1720)
brother, you need to unlock your bootloader and upgrade to romracer's custom CWM 3.2 !
I'd switch to RomRacer's CWM Recovery... newer, better, etc.
First you need to check to see if you have file "install-recovery.sh" @ /system/etc.
If you do, delete it. Then install RomRacer's; thread here: http://forum.xda-developers.com/showthread.php?t=1204500
Alright got the recovery image flashed, where do I go from here, or am I finished? They didn't provide any further instructions, but i'm not seeing an app or anything that would initiate recovery...
Woooowww... nevermind guys, the answer was too obvious. Anyway thanks for the help!
My apologies if this has been asked before, but I've spent hours searching and think I've done a better job of confusing myself, than answering my question.
I've rooted my wife's Samsung Fascinate, using Super One Click and removed all annoyances such as the Verizon bloat ware and got add blocker installed, etc. The point on doing so, was also to improve battery life, backup the ROM and some of the other associated advantages with rooting. One of my main goals was to also install a custom ROM on her phone, as the factory ROM is very flaky. It receives emails, then doesn't. It sends a text, then can't minutes later. It's been a great phone HW wise, but just junk as far as the OS.
Thus far, all attempts to backup the factory (modified) ROM has failed, which evidently is part of the limitation with the stock ROM. At this point, she's so frustrated (me too) with her phone, that it's time to get serious.
So, my confusion stems from varying reports regarding what the proper steps are to install a new ROM. On my Thunderbolt, I simply used CWM to install and backup/restore my ROMs as needed. This doesn't seem to be the case with the Fascinate and there's varying reports of whether this can even be done if Super One Click was used.
Has anyone had experience with flashing new ROMs after the phone was rooted and if so, by what method?
Her current ROM details are:
Firmware
2.2.2
Baseband
S:i500.04 V.ED05
Kernel
2.6.32.9
Build
SCH-I500.ED05
Thanks in advance.
stock roms,radios, and recoveries are flashed via odin. custom roms are flashed via the appropiate cwm for that specific rom.
example: lets say you want cm7
you would odin cwm4 recovery fixed for cm7(pda function only)
three finger boot into recovery
wipe data,cache,dalvik
install cm7 zip
profit
most stock roms and powewashed gingerbread rom are .tar files and need to be flashed in the pda funtion of odin.
then use odin again to flash the appropiate cwm, such as cwmall.tar, which can be found in the pwgb thread(op).
basically just remember zip files are flashed in recovery, .tar and md5 files are flashed in the pda function of odin and you will be set!
droidstyle said:
stock roms,radios, and recoveries are flashed via odin. custom roms are flashed via the appropiate cwm for that specific rom.
example: lets say you want cm7
you would odin cwm4 recovery fixed for cm7(pda function only)
three finger boot into recovery
wipe data,cache,dalvik
install cwm zip
profit
most stock roms and powewashed gingerbread rom are .tar files and need to be flashed in the pda funtion of odin.
then use odin again to flash the appropiate cwm, such as cwmall.tar, which can be found in the pwgb thread(op).
basically just remember zip files are flashed in recovery, .tar and md5 files are flashed in the pda function of odin and you will be set!
Click to expand...
Click to collapse
Okay, that makes a lot more sense now. Thanks for the quick reply.
correct me if i'm wrong but when flashing the cwm fixed for cm7, the 3 finger method does not work.
ibsk8 said:
correct me if i'm wrong but when flashing the cwm fixed for cm7, the 3 finger method does not work.
Click to expand...
Click to collapse
it does until the rom is flashed, then you have to long press the power button and select reboot recovery...at that point your no long in cwm4 fixed for cm7. once the bml to mtd conversion takes place it's converted to cwm 5.x.x.
droidstyle said:
it does until the rom is flashed, then you have to long press the power button and select reboot recovery...at that point your no long in cwm4 fixed for cm7. once the bml to mtd conversion takes place it's converted to cwm 5.x.x.
Click to expand...
Click to collapse
I never could get to the ROM flashing part. Every time I tried I got the same set of errors as when trying to backup the original ROM. I did manage to get the CWM 4 fix applied through ODIN and it said successful, but nothing really changed and my attempts to flash the new ROM still failed.
I searched around this forum and others and found another file to flash and things went very badly. The flash was moving super slow and I left the phone, so I wouldn't be tempted to do anything stupid and after an hour, it was at the same point. When I rebooted the phone, I got a sad face icon only. No Samsung logo or anything.
Luckily, I was able to re flash the stock rom, but after messing with it for 4 hours and getting nowhere, I decided the stock ROM was good enough for now. I have no idea why this phone is so pesky and read how some folks had to ref lash the stock ROM, before being able to flash a new ROM. I made one final attempt to do so and got the same error as the first time, so that was enough for that day. I don't recall exactly what the error said at this point, but I had blue text, followed by orange, which I think said something to the fact that is was unable to verify the package, followed by red text showing the failures.
Sorry there's no more detail than that for now. I may try this again in the future, but as mentioned this is the wife's phone, so I can't take nearly the liberties with it as I could my own.
If anyone has any ideas on what I may be able to try next, that would be great. If not, I may keep digging on this forum (a very helpful place indeed) and see what the options may be.
Thanks everyone for your help.
refer to section 3 of my guide and follow those steps. for some reason certain fascinates have trouble flashing mtd roms when starting from ed05. I have to start with dl09 eclair then flash cm7. look in page 2 of this section for my guide. all files needed can be found there aswell. good luck!
Here's the deal:
I rooted my phone a long time ago, and have been using CM since ICS. Mostly nightlies.
A few weeks ago I decided installing a Carbon nightly (4.3), and everything went smooth as usual.
Then new nightly came, so I decided flashing it. (Dirty flash, but it's that way from what I read in the Carbon thread)
The thing is, my phone boots up correctly, but I can't get into recovery mode. Whenever I try booting recovery mode, the logo appears, then the screen flashes gray. I have tried both the advanced reboot menu, the button combo, and ROM Man...jk
I think something might be wrong with the recovery included in the kernel. If that's the case, would it be OK to flash just a new kernel or do I have to reflash the whole thing?
I have already seen some guides on flashing kernels with mobile ODIN, but they're either ancient or for another model. Also, I don't know if that's the right thing to do under this situation.
I'd appreciate if someone pointed me in the right direction. I don't wanna frak up my phone.
You can install a kernel to see if that will solve the issue, but as far as I can see, the Carbon devs do not provide a stand alone kernel for their rom. You could use AJK or one of the other kernels though. Or you could just reinstall the rom to see if it would clear up the problem.
Or, you could extract the zImage from the full rom and use Mobile Odin.
I didnt want to create a new thread for this and get yelled at.. so I am asking the question here:
I had to do the ODIN method and returned my phone from ShoStock 3 to Stock Gingerbread, because for some reason my phone was getting stuck at the "samsung galaxy s2" boot screen.
So I am back on Stock Gingerbreak Rom and trying to install ClockWork Mod Recovery, so that I can restore the backup of ShoStock that I had created.
I am doing the Mobile Odin Lite method and I downloaded the i777 kernel. When I try to install it, I boot in the Android System Recovery (3e) and get the following errors:
Installing package...
Finding Package...
Verifying Update Package...
E: failed to verify whole-file signature
E: signature verification failed.
Before I get yelled at, I searched google and came up with the solution -- all of which say that the issue can be easily fixed by toggling the setting in ClockWork Mod Recovery Mode, but I have to install it first, and whenever I try to install it, I get the above error.
Can someone help please?
jjack0310 said:
I didnt want to create a new thread for this and get yelled at.. so I am asking the question here:
I had to do the ODIN method and returned my phone from ShoStock 3 to Stock Gingerbread, because for some reason my phone was getting stuck at the "samsung galaxy s2" boot screen.
So I am back on Stock Gingerbreak Rom and trying to install ClockWork Mod Recovery, so that I can restore the backup of ShoStock that I had created.
I am doing the Mobile Odin Lite method and I downloaded the i777 kernel. When I try to install it, I boot in the Android System Recovery (3e) and get the following errors:
Installing package...
Finding Package...
Verifying Update Package...
E: failed to verify whole-file signature
E: signature verification failed.
Before I get yelled at, I searched google and came up with the solution -- all of which say that the issue can be easily fixed by toggling the setting in ClockWork Mod Recovery Mode, but I have to install it first, and whenever I try to install it, I get the above error.
Can someone help please?
Click to expand...
Click to collapse
3e recovery is the stock recovery. It means you have not installed a custom kernel yet. Please look at the links in my signature and use the guide information there, which will help you understand what you need to do to install mobile odin lite and then install a custom kernel.
Also, remember that you will need to have the correct version of ClockworkMod Recovery to restore your backup. If the backup and the version of CWM recovery are not compatible, it will not restore.
If you have questions, ask them here, but be aware, I only come on line usually two or three times a day to check the forums.
creepyncrawly said:
3e recovery is the stock recovery. It means you have not installed a custom kernel yet. Please look at the links in my signature and use the guide information there, which will help you understand what you need to do to install mobile odin lite and then install a custom kernel.
Also, remember that you will need to have the correct version of ClockworkMod Recovery to restore your backup. If the backup and the version of CWM recovery are not compatible, it will not restore.
If you have questions, ask them here, but be aware, I only come on line usually two or three times a day to check the forums.
Click to expand...
Click to collapse
I followed Step 3a on this post: http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
Unfortunately, for some reason, ODIN Lite was not recognizing DD_03042012.zip file. So I went with Siyah and downloaded the TAR file used ODIN to get the clockwork mod. It worked.
Now the problem is I cant restore my backup. I know the same backup has worked before, not it is giving me an error "Error while restoring /system". wth!
I dont remember what version of Clockwork Mod I had. I know it was an older version, becuase it didnt have touch.
How do I get a previous version of CWM?
But my problem isn't even remotely similar to this guy!
I'm trying to ask if there's some way to flash a new kernel/rom without using recovery, taking advantage of the fact that my phone boots fine but I can't boot recovery. That's the reason why I mentioned ODIN.
Also, go make your own thread. My question didn't even get answered
Actually,
Creepyncrawly, thanks for your help.
I downloaded ShoStock 3 and flashed it to get the previous version of CWM, and then was able to do a restore.
Sigh.. no harm done.
You can have your thread back... good luck!!
Mighty_Rearranger said:
But my problem isn't even remotely similar to this guy!
I'm trying to ask if there's some way to flash a new kernel/rom without using recovery, taking advantage of the fact that my phone boots fine but I can't boot recovery. That's the reason why I mentioned ODIN.
Also, go make your own thread. My question didn't even get answered
Click to expand...
Click to collapse
Yes, as stated by creepyncrawly, u can use mobile odin or regular odin to flash a kernel.
But i would suggest doing a MD5 check on the Rom u downloaded, because the Rom u flashed may be that of a corrupted download. If MD5 doesn't match then redownload, check MD5 and if good, reflash the Rom.
.....or maybe the nightly is messed up.
Sent from my SAMSUNG-SGH-I747 using xda premium
Mighty_Rearranger said:
Here's the deal:
I rooted my phone a long time ago, and have been using CM since ICS. Mostly nightlies.
A few weeks ago I decided installing a Carbon nightly (4.3), and everything went smooth as usual.
Then new nightly came, so I decided flashing it. (Dirty flash, but it's that way from what I read in the Carbon thread)
The thing is, my phone boots up correctly, but I can't get into recovery mode. Whenever I try booting recovery mode, the logo appears, then the screen flashes gray. I have tried both the advanced reboot menu, the button combo, and ROM Man...jk
I think something might be wrong with the recovery included in the kernel. If that's the case, would it be OK to flash just a new kernel or do I have to reflash the whole thing?
I have already seen some guides on flashing kernels with mobile ODIN, but they're either ancient or for another model. Also, I don't know if that's the right thing to do under this situation.
I'd appreciate if someone pointed me in the right direction. I don't wanna frak up my phone.
Click to expand...
Click to collapse
Mighty_Rearranger said:
But my problem isn't even remotely similar to this guy!
I'm trying to ask if there's some way to flash a new kernel/rom without using recovery, taking advantage of the fact that my phone boots fine but I can't boot recovery. That's the reason why I mentioned ODIN.
Also, go make your own thread. My question didn't even get answered
Click to expand...
Click to collapse
I can see why you could be upset that someone hijacked your thread.
I only see one question in your original post, which I believe I answered. You also requested assistance which I thought I provided.
Let me be a little more specific for you. Yes, you can flash just a kernel without re-flashing the system. However, you will need either an Odin flashable tar of the kernel, or you will need to install Mobile Odin and then you can flash a kernel directly from a zImage file.
However, I think 4-2ndtwin has the right of it. It was probably a bad flash, even though the phone booted normally. You should consider re-flashing the entire rom.
If you are not clear about anything, please ask questions.
Never mind.
I concluded it wasn't worth it just because I was lazy backing up stuff.
I used this: http://forum.xda-developers.com/showthread.php?t=1525821, then flashed a clean ROM.
Thanks for the help, you guys are awesome.
New to this - I really apologize if this has been covered before but I've been searching all evening and not coming up with a definitive answer.
What's the easiest way to remove a custom recovery (like twrp) and go back to stock? Still on the stock rom, just have custom recovery. I manually deleted a nandroid backup using a file manager from my sd card yesterday, and now when booting into recovery it sits on the twrp screen for easily 10-15 minutes. I can't fathom why that would have an effect on the start up time but that's all I can think of that changed. I've tried re-installing twrp via goomanager - no change.
Is there a way to do so without using usb? I'm curious because the first S4 I had, the usb port went bad after only a month and I was in a panic that I wouldn't be able to get it back to stock (until I finally got it to work long enough to flash it with odin). Really don't want to risk that happening again.
Looking to run some roms once I think I understand at least half of what I'm doing, but trying to be cautious. I'd like to keep twrp but I want to make sure it's working right by loading a clean install of it.
Thanks in advance.
A lot of users are experiencing the lag with TWRP version installed by Goo Manager - (TWRP 2.6.0).
The link below has a flashable zip to version 2.5.0.2, this version seems to be stable and doesn't lag at the TWRP screen for most people including myself.
I would try flashing this and I think it will solve your problem.
http://forum.xda-developers.com/showpost.php?p=45006486&postcount=289
gadget! said:
A lot of users are experiencing the lag with TWRP version installed by Goo Manager - (TWRP 2.6.0).
The link below has a flashable zip to version 2.5.0.2, this version seems to be stable and doesn't lag at the TWRP screen for most people including myself.
I would try flashing this and I think it will solve your problem.
http://forum.xda-developers.com/showpost.php?p=45006486&postcount=289
Click to expand...
Click to collapse
Thank you. I'm a little stumped on what to do with the zip now that I have it though and all my searching for "loading recovery with goo manager" just shows the method to load the newer version. Or if you're supposed to load it via pc, what do you use? Odin doesn't like any of those file types.
Sorry if this is a dumb question. Probably just not searching for the right thing.
bretbretterson said:
Thank you. I'm a little stumped on what to do with the zip now that I have it though and all my searching for "loading recovery with goo manager" just shows the method to load the newer version. Or if you're supposed to load it via pc, what do you use? Odin doesn't like any of those file types.
Sorry if this is a dumb question. Probably just not searching for the right thing.
Click to expand...
Click to collapse
You flash it via recovery. Put in your sdcard/internal boot to recovery amd use the install zip option. Navigate to where it is and flash away.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk. now Free
bretbretterson said:
Thank you. I'm a little stumped on what to do with the zip now that I have it though and all my searching for "loading recovery with goo manager" just shows the method to load the newer version. Or if you're supposed to load it via pc, what do you use? Odin doesn't like any of those file types.
Sorry if this is a dumb question. Probably just not searching for the right thing.
Click to expand...
Click to collapse
Yes, it is a flashable zip, just flash it in the recovery you have now.
I found this post based on the OP's original question, "how to remove TWRP recovery".
I have been flashing rooted ROMs for a while now via ODIN, but am just now starting to foray into the realm of custom recoveries. Before I install TWRP though, I wanted to know how to remove it just in case something ever goes wrong. That is, I've been avoiding the use of a custom recovery so far because if something ever happened to my device, I could just flash the stock ROM, and having already used Triangle Away, Samsung will never be the wiser and would service my device, but with a custom recovery installed, they would be able to see I'm not running totally stock.
So, is there a way to completely return my device to 100% stock after installing TWRP? And if so, how would I go about doing that?
My device is a Samsung Galaxy Note 10.1 GT-N8013, currently running a root injected stock ROM, 4.1.2
EDIT: I just noticed that this is in the S4 forum, which my N8013 obviously is not, but the answer to my question should be the same regardless, yes?
margentieri said:
I found this post based on the OP's original question, "how to remove TWRP recovery".
I have been flashing rooted ROMs for a while now via ODIN, but am just now starting to foray into the realm of custom recoveries. Before I install TWRP though, I wanted to know how to remove it just in case something ever goes wrong. That is, I've been avoiding the use of a custom recovery so far because if something ever happened to my device, I could just flash the stock ROM, and having already used Triangle Away, Samsung will never be the wiser and would service my device, but with a custom recovery installed, they would be able to see I'm not running totally stock.
So, is there a way to completely return my device to 100% stock after installing TWRP? And if so, how would I go about doing that?
My device is a Samsung Galaxy Note 10.1 GT-N8013, currently running a root injected stock ROM, 4.1.2
EDIT: I just noticed that this is in the S4 forum, which my N8013 obviously is not, but the answer to my question should be the same regardless, yes?
Click to expand...
Click to collapse
Answer would be device specific
Sent from my cm_tenderloin using xda app-developers app
Thanks Gadget, Hex. TWRP 2.5.0.2 works great. But just for future reference, is the only way to revert to the stock recovery by flashing a stock device image via odin over usb? So if the USB port were to fail entirely, I would be SoL - correct?