Related
Hi all,
Once again, I've hit a wall with my phone. I apologize ahead of time for the length of this post, but i want to be very clear about what happened so I can get it resolved as soon as possible. Also, I have searched for hours to find an answer to this problem, but I've failed to find anything that helps.
Earlier this week I was running Bionix Fusion 1.1 but with all the buzz on the forums about the new 2.2 ROMs I decided to try one. I downloaded Axura 2.0.5 and backed up everything with Titanium Backup and ROM Manager. I then went through ROM Manager to perform the install. This is were I fear I messed something up. I renamed the .zip file from StockKernelAXURA.zip to update.zip (just like when I installed Bionix). Booted into Clockwork (through ROM Manager) and flashed the zip. Everything looked fine during the install, but I'm stuck at the Vibrant load screen.
I found one solution that uses Odin to reflash back to factory, which I did and everything was great... but then I re-flashed and tried Axura 2.0.5 again using the same method. Now I can't boot up (still stuck on the Vibrant load screen) and I can't enter Download mode. I've tried all kinds of button and usb plug-in sequences. Nothing! Please, I know someone out there is thinking "Noob... this is a simple fix!" I'm hoping that person reads this and can lend a helping hand.
Thanks in advance!
This always works for me take out battery plug in usb to phone and computer hold down volume keys while holding the volume keys place the battery back in this should take you to download mode if it doesn't your phone may be hardware locked there are methods of making a device to force download mode but try what I said first then if that doesn't work at least you have an idea of what else to look for
Still flashing , thanks to odin & tw
It worked! Thank you, thank you, thank you! I knew there had to be a way I was missing! I'm flashing back to stock (again) and I'm going to try flashing Axura again... but seeing as the method I used has failed twice so far, any advise? I love how Team Whiskey provided detailed instructions for flashing Bionix Fusion... so shouldn't the same process work for different ROMs? Regardless, now I have another trick up my sleeve.
Thanks again!
Flash it through clockwork in rom manager choose install from sd then go to where it is in your phone click on it that should send you to clockwork recovery then go to install.zip from sd then navigate to whatever folder its in then go to it, it should install you dont have to change the name
Still flashing , thanks to odin & tw
If your unsure about anything I said dont be afraid to ask if I have the answer I'll help you out
Still flashing , thanks to odin & tw
willsnews said:
If your unsure about anything I said dont be afraid to ask if I have the answer I'll help you out
My download is working, the only thing is whenever i try to use odin to install a Rom it freezes in download mode. What can i do to restore it?
Please help
Click to expand...
Click to collapse
coldflid said:
willsnews said:
If your unsure about anything I said dont be afraid to ask if I have the answer I'll help you out
My download is working, the only thing is whenever i try to use odin to install a Rom it freezes in download mode. What can i do to restore it?
Please help
Click to expand...
Click to collapse
I'm assuming you're stuck at cache Just take out your SD card, the large one. I always odin with my sd card out. It gets past that phase where you can get stuck. That will work, and DO NOT rename the {insert rom name here}.zip file to update.zip, just enter clockwork mod recovery and choose install zip from sd card and find it, BUT you NEED to
1. Wipe cache partition
and
2. Wipe DALVIK cache (in advanced menu)
BEFORE installing a rom.
Click to expand...
Click to collapse
So rather than start new thread I thought id continue on this one saying that I have the same problem only no matter what I do I can not force any mode at all. My phone is currently stuck stating that it is converting data partition to optimize for ext 4.
I really dont know what to do at this point.
I tried the following steps
1. Download all the files required in the "BOOT CYCLE" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "BOOT CYCLE" section.
with no results. It doesnt even give my phone enough time to show the charging indicator it just automaticlaly boots.
OK i got it to go into download mode. i just plugged in the cord and held down the volume rocker.
no recovery mode
I have the same problem I can't get into Recovery mode I have an HTC G2, I was installing a new kernel, then the recovery Mode stop working, Got stuck in HTC Logo.
Any idea how to fix the problem or what's my problem??? i'd already try some tips but nothing works....
try using the vibrant toolbox to flash the new rom
willsnews said:
This always works for me take out battery plug in usb to phone and computer hold down volume keys while holding the volume keys place the battery back in this should take you to download mode if it doesn't your phone may be hardware locked there are methods of making a device to force download mode but try what I said first then if that doesn't work at least you have an idea of what else to look for
Still flashing , thanks to odin & tw
Click to expand...
Click to collapse
Im having the same problem. I restored an old backup, then rebooted and now I cant get past the Vibrant load screen. No download mode, no recovery, nothing. Any ideas?
Camdizzzle said:
Im having the same problem. I restored an old backup, then rebooted and now I cant get past the Vibrant load screen. No download mode, no recovery, nothing. Any ideas?
Click to expand...
Click to collapse
You most likely made that backup when voodoo was disabled and now when you restored it, voodoo was enabled. Try booting up in recovery[VOL UP + VOL DOWN + POWER then let go of POWER and keep holding VOL UP + VOL DOWN] and installing a voodoo kernel like overstock.
That may be what happened, but dont know anything about the history of the phone. I have tried over and over to get into recovery mode and it wont go past the Vibrant load screen :/
I am also stuck at the vibrant boot screen.
I was trying to update a rom via CWM on my phone, the phone restarted and is now stuck at the vibrant screen.
I have had trouble connecting my vibrant to the computer before. I am not sure that even if i get my phone into dl mode i might not be able to connect to ODIN.
Please help!!
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
Don't worry..i have done worse things with my phone and yet to brick it..
Fist thing to go into recovery you hold vol up + power + home and not vol down..
Second thing what you will have to do is after the Odin flash..press and hold vol up+power+home..you will boot into the stock recovery..from here do a factory reset but mind you all the data on your internal sdcard will be lost when you do this..now reboot your phone..your phone will boot up properly now..assuming that you have flashed the firmware properly in Odin..
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
As zoot1 replied to you for download mode press vol down+home+power for a few seconds......for recovery vol up+home+power.........
And make very sure the kernel you flash is compatible with your phone and firmware!!!!!!!!!!!! The rest zoot1 explained in his reply
Good luck
Sorta Bricked
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
db1117 said:
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
Click to expand...
Click to collapse
go to download mode and flash a stock rom via odin
Cant's get to Download mode
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
db1117 said:
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
Click to expand...
Click to collapse
Well i suggest u send it with its warranty or u could check out my sig and build ur own usb jig
Sent from my GT-I9300 using xda premium
You might be able to get to download mode via a usb jig.
Hey guys. I have mentioned this problem in the paranoid thread, but since I haven't gotten a definitive answer to this problem, I decided to ask for help here. I was running paranoid with entropy's kernel. I was trying to find a good DPI for Framework-res and I had it set on 180. Most likely, I accidentally typed 18 or 1800, as when I rebooted my device, It bootlooped. It would make it to the paranoid boot logo, then it would show about a third of what might be a system toast, probably the optimizing apps notification, and then it would return to the paraoind logo. I went into CWM and tried to reflash the ROM, but I ran into the same problem. So I wiped everything and factory resetted, then reflashed the ROM. After that, it wouldn't even get passed the Samsung logo. It just stays there indefinitely. I am not able to reach CWM in this state, but if I let the device die, then recharge it, then turn it on, I can get into CWM. Is there any hope for my only Android device? Thank you for replying to my urgent request.
-Many thanks,
arceusg
The fact that you can get into CWM is a good thing. So, don't do anything drastic. When you get into CWM, do a data/factory reset. Then, wipe cache partition. Then go into mounts and storage and format System. After that, while still in the mounts and storage menu, choose mount USB storage and plug into PC. When USB storage opens on your PC, put a .zip of a different ROM on your device. Close USB storage and go back and install the ROM through CWM. Once the new ROM is installed, try moving on from there.
EDIT:
Also, I'm pretty sure that you should be able to get to CWM Recovery regardless of the battery state or DPI. I'm not trying to insult your intelligence here, but I just want to recap how to get into CWM Recovery on the 5.0.
1. Hold VOLUME UP + POWER until the Samsung logo shows up, but don't let go yet.
2. The device should reboot again, where the screen will go black and the Samsung logo will pop up again.
3. Now that the Samsung logo has popped up again, let go of the power button, but continue to hold the VOLUME UP button.
4. Continue to hold the VOLUME UP button until CWM Recovery boots up.
Any luck, dude?
I followed your exact instructions and it just stops at the samsung logo. Any suggestions? I am open to heimdall/ODIN.
Are you able to get into download mode?
You can do this by:
Holding VOLUME DOWN + POWER until a yellow construction-like sign comes up.
If you can, that's critical for ODIN to work.
If you get to download mode, you can download a ROM that you flash via ODIN.
I'm assuming you know how to operate ODIN.
If not, try getting into download mode, and we'll move forward from there. Keep me updated.
Also, with regards to my post below. About getting into recovery mode, be sure that you are holding the VOLUME UP + POWER buttons until the Samsung logo boots up twice, at which point you release the power button. Be sure you're doing that.
I am able to get it in download mode. I also have ODIN installed, and I'm pretty familiar with ODIN, but wlking me through it would be nice, just cuz I'm no stranger to bricking devices through tools like this.
Basically, the only thing you need to know when flashing via ODIN on the SGP 5 is that anything you flash should be flashed through the "PDA" option of ODIN. So, when you want to flash a .tar file via ODIN, press the PDA button and navigate to the directory on your computer where you stored the file you want to flash.
I don't think you need to repartition, but if you did, you'd need to download the .pit file and flash through the PIT option in ODIN.
Anyway...do you have Stock ROM handy? You can flash a custom kernel with stock ROM, so you can flash an overclock kernel for your device, then flash stock ROM on top of that.
Let me know how you do.
Where can I get an ODIN flashable stock tar? And its pretty late here in New York so I'm gonna head up to bed.
I'm down here on the east coast in Virginia, but I'll be up for a while yet.
Do you have the USA or the international SGP 5?
The international has a physical home button.
The USA has all capacitive buttons.
I need to know this in order to see if I can track down a ROM for you.
I'm just going to assume you have the USA version since you're in New York.
Here's a great thread I found about going back to stock via ODIN.
http://forum.xda-developers.com/showthread.php?p=28849870#post28849870
here is a thread with all the roms and kernels you need,but give zaclimon a big thanks for making this thread for us noobs.READ and good luck-------http://forum.xda-developers.com/showthread.php?t=1720457-----
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Switch off your phone..
Press the power button..
Once you see the logo screen press and hold the left capacitive button..
Sent from my GT-I9300 using Tapatalk 2
zoot1 said:
Switch off your phone..
Press the power button..
Once you see the logo screen press and hold the left capacitive button..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I already did that....still stuck in safe boot.
alphaola said:
I already did that....still stuck in safe boot.
Click to expand...
Click to collapse
I think its:
Switch off your phone..
Press the back or cancel(left) button..
Once you see the logo screen press and hold the left capacitive button..
Hey,
I'm having the exact same issue with my note 2. Wondering if you found a solution.
Anybody can help with this? I am having the same issue
use search, asked and answered too many times
I did search..
I tried everything.
full wipe, cache, dalvik, factory reset and it keeps saying safe mode.
so please help
EDIT:
i just installed slim rom, and it keeps saying safe mode...
s3 safe mode
one way work for me..
1-turn off the phone
2- remove battery
3- short + and - in battery connector for few minute
4-insert battery and turn it on
alphaola said:
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Click to expand...
Click to collapse
It's Volume button work fine??
The problem has nothing to do with reboot. As you can see have already mentioned reboot as part of the solutions I tried.
My device is fine with ICS firmwares but has issues with Jellybean (stock and modded rom including CM10.1). Currently am running ICS on it as thats the only way the phone works properly.
I installed 4.0.4 (XAALF2) via Odin, but it got stuck on samsung logo. Then turned it off and flashed CWM to do factory reset as the volume key doesnt work on stock recovery. After that everything worked fine. I was able to update to the latest 4.0.4 via OTA.
The problem is hardware, so you might want to contact Samsung.
I found some information about "Safe Mode".
It seems that every Android phone has a safemode.
"On Samsung’s devices, almost all users will be able to access Safe Mode with by pressing and holding the menu button during start up. If it’s a capacitive menu key, make sure to release and press again each time the LED under the key comes back on. You don’t want to miss the catch for Safe Mode because the button released itself."
Here is the link where i get the information: http://www.tested.com/tech/android/...ds-safe-mode-to-save-a-phone-from-boot-loops/
You can try it this way, maybe it will work.
Good luck.
Ic3y83 said:
I found some information about "Safe Mode".
It seems that every Android phone has a safemode.
"On Samsung’s devices, almost all users will be able to access Safe Mode with by pressing and holding the menu button during start up. If it’s a capacitive menu key, make sure to release and press again each time the LED under the key comes back on. You don’t want to miss the catch for Safe Mode because the button released itself."
Here is the link where i get the information: http://www.tested.com/tech/android/...ds-safe-mode-to-save-a-phone-from-boot-loops/
You can try it this way, maybe it will work.
Good luck.
Click to expand...
Click to collapse
I think u missing the point, the phone works fine with 4.0.4 firrmwares, it only get stuck in safe mode when updated to Jellybean 4.1.1 and above. No amount of key combination, factory reset or even custom rom was able to fix the safe boot.
The best option is to send it back to samsung, its definitely hardware issue.
alphaola said:
I think u missing the point, the phone works fine with 4.0.4 firrmwares, it only get stuck in safe mode when updated to Jellybean 4.1.1 and above. No amount of key combination, factory reset or even custom rom was able to fix the safe boot.
The best option is to send it back to samsung, its definitely hardware issue.
Click to expand...
Click to collapse
I'am sorry for misunderstanding u. I think you could be right. Maybe it is a hardware issue.
Don't forget to "unroot" and reset the "flash counters".
Greetz.
alphaola said:
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Click to expand...
Click to collapse
i did a reboot and it removed the safe mode :good:
My personal experience, i overclocked my SGS3 with Boeffla kernel on ARHD then i got freeze screen and phone reebot into safe mode, I entered into recovery and reebot then everithing was fine again.
Safe mode occurs when something in the phone is not working properly , could be hardware or software, however, stuck on it is not a good signal.
my advice is to send the device to service.
Do not forget to reset flash counter via Triangle Away and flash stock factory firmware.
Good Luck! :good:
note 3 stuck in save mode window
This problem occurs after changing to a new simcard not already installed before in the device.
1. Power off the galaxy note 3.
2. Remove the micro simcard from the slot by sliding.
3. Power on the device without the simcard.
4. It will run in a normal mode, if so, this will actually diagnosed that there is a simcard defined by the administrator as default. In the security setting in setting menu and for protection against theft, the original simcard must be insert to unlock this choice of detection of any change in new simcard. New simcard is defined as strange and theft suspected.
I hope this make you reach some solution for your trouble.
S3 SAFE MODE issue
Plz help....
On my s3 i9300, its always on safe mode. Tried FACTORY DATA RESET. Still on safe mode. Other issue is that on power on and off, back LED turns on for few seconds. Also volume down not working. These issues started after s3 went on safe mode. Any sloution??
shoeb_v said:
Plz help....
On my s3 i9300, its always on safe mode. Tried FACTORY DATA RESET. Still on safe mode. Other issue is that on power on and off, back LED turns on for few seconds. Also volume down not working. These issues started after s3 went on safe mode. Any sloution??
Click to expand...
Click to collapse
Same issue here, it is hardware
I went through a lot of threads and not one had a solution. So I will post here what worked for me.
Customer came to my store with Galaxy S3 (SPH-L710T) that was stuck in safe mode. I tried everything on this thread, nothing worked. Luckily I had a older Galaxy S3 (SPH-L710) with a broken screen, so I switched over the motherboard from the customer's phone to the old one - I did connect the customer's original LCD to the motherboard since my old phone had its LCD broken. Powered it on, no safe mode.
So at this point I just transferred the volume buttons flex cable to the customer's phone. Powered it on, no safe mode again.
Hope it helps someone!
hi, im new here, the problem i have is this: i have a galaxy s2 i777, i had the issue that whenever i restarted my phone it would go into recovery mode, that was after i tried to put cyanogenmod 10 in it, before that, my power button stopped working after trying to root with framaroot and choosing supersu and restarted, so i had to flash because i couldnt choose an option on recovery mode with my power button not working and i did, and flashed to 4.1.2, then i tried to root again with framaroot but this time superuser, and when i restarted the phone it got stuck on samsung, so i tried to flash it again but now im getting stuck on factoryfs.img with odin, ive tried with 3 different roms, ICS 4.0.3, 4.0.4 and JellyBean 4.1.2, but always the same, also, when i restart now i get the message "firmware upgrade encountered an issue. please select recovery mode on kies".
havent found any solution in no forum wich is why im postin this here, its an emergency, im without a phone right now because of this!!
i hope you can help me!! Thanks.
US variants have their own fora, your thread belongs here. I've asked mods to move it for you, sit tight until they do.
MistahBungle said:
US variants have their own fora, your thread belongs here. I've asked mods to move it for you, sit tight until they do.
Click to expand...
Click to collapse
ohh, sorry i was looking for this model before posting but only saw i9100, thanks anyways.
juanf9224 said:
hi, im new here, the problem i have is this: i have a galaxy s2 i777, i had the issue that whenever i restarted my phone it would go into recovery mode, that was after i tried to put cyanogenmod 10 in it, before that, my power button stopped working after trying to root with framaroot and choosing supersu and restarted, so i had to flash because i couldnt choose an option on recovery mode with my power button not working and i did, and flashed to 4.1.2, then i tried to root again with framaroot but this time superuser, and when i restarted the phone it got stuck on samsung, so i tried to flash it again but now im getting stuck on factoryfs.img with odin, ive tried with 3 different roms, ICS 4.0.3, 4.0.4 and JellyBean 4.1.2, but always the same, also, when i restart now i get the message "firmware upgrade encountered an issue. please select recovery mode on kies".
havent found any solution in no forum wich is why im postin this here, its an emergency, im without a phone right now because of this!!
i hope you can help me!! Thanks.
Click to expand...
Click to collapse
You need to perform a wipe data/factory reset from within recovery. Since you have a bad power button, and cannot select that in stock recovery, you either need to get a touch recovery onto the phone, or you need to get the power button replaced. I'm not aware of a touch recovery that is in tar format that you can flash with Odin, but maybe someone else knows. Also, the recovery will need to match the system so that the phone will boot. Since you have flashed stock 4.1.2 but subsequent attempts to flash did not complete, you probably still have stock 4.1.2 on the phone. If so, that would require AJK v4.9 NoSwap, but again, I'm not aware of a tar version of that kernel.
Sorry I can't be of more help.
With regard to your other thread, there is a UCKH7 pit file in the Download Repository, but no one has posted a pit from UCMD8. I would expect that they are the same, though, since these phones never get repartitioned when upgraded. However, I doubt that will help your situation. What you need to do is perform a wipe data/factory reset.
creepyncrawly said:
You need to perform a wipe data/factory reset from within recovery. Since you have a bad power button, and cannot select that in stock recovery, you either need to get a touch recovery onto the phone, or you need to get the power button replaced. I'm not aware of a touch recovery that is in tar format that you can flash with Odin, but maybe someone else knows. Also, the recovery will need to match the system so that the phone will boot. Since you have flashed stock 4.1.2 but subsequent attempts to flash did not complete, you probably still have stock 4.1.2 on the phone. If so, that would require AJK v4.9 NoSwap, but again, I'm not aware of a tar version of that kernel.
Sorry I can't be of more help.
With regard to your other thread, there is a UCKH7 pit file in the Download Repository, but no one has posted a pit from UCMD8. I would expect that they are the same, though, since these phones never get repartitioned when upgraded. However, I doubt that will help your situation. What you need to do is perform a wipe data/factory reset.
Click to expand...
Click to collapse
hey, thanx for your answer, i finally flahed it with odin to 4.1.2 but it wont recognize the sim card, also, the phone wont boot when i put the battery on, maybe the function got damaged by restarting so much using the battery, and with the power button not working, how will i power it on,! lol a problem after another x_X
juanf9224 said:
hey, thanx for your answer, i finally flahed it with odin to 4.1.2 but it wont recognize the sim card, also, the phone wont boot when i put the battery on, maybe the function got damaged by restarting so much using the battery, and with the power button not working, how will i power it on,! lol a problem after another x_X
Click to expand...
Click to collapse
If you can solder and are handy at such things, you can get the replacement button for about $10 or $15. Or you can send it out to a repair service for usually about $40 to $50.
While you have a faulty power button:
To turn the phone on, hold down vol+ and vol- and plug in the usb cable, as if you were starting download mode. When you get to the warning screen, remove the cable and press the vol- button to cancel. The phone will boot into system.
There are multiple apps in the play store that turn the screen on and off. A good one is Gravity Screen - On/Off.
creepyncrawly said:
If you can solder and are handy at such things, you can get the replacement button for about $10 or $15. Or you can send it out to a repair service for usually about $40 to $50.
While you have a faulty power button:
To turn the phone on, hold down vol+ and vol- and plug in the usb cable, as if you were starting download mode. When you get to the warning screen, remove the cable and press the vol- button to cancel. The phone will boot into system.
There are multiple apps in the play store that turn the screen on and off. A good one is Gravity Screen - On/Off.
Click to expand...
Click to collapse
ill try with that app, thanks! and about the sim, i checked and i have no imei now nor baseband, theyre both unknown, any idea about it? how can i recover it?