Ok, so first off, I was interested in the prospect of using the Droid3 camera because I heard it was better and supported high speed video recording (something that I really want on the Atrix) but I heard that you had to be Deodexed. Well, I knew that if I unlocked my bootloader and installed a custom ROM such as Alien or CherryPie, it would work, but I didn't want to unlock my bootloader. I was rooted though.
So then I decided to google how to manually deodex, and I came across the program xUltimate whatever, followed the directions (although it seemed to be intended for the Droid and not the Atrix, I don't think I should've done that) and part of the process through running xUltimate, I got a message saying that I was out of space on my Atrix relating to the process it was in the middle of doing, and was like, oh crap.
My phone didn't start, but I had made a recovery a couple of days earlier in Tenfar's CMW, so I went to restore that. Then when that was restoring, it froze on some process when it was restoring, and I let it try and try for hours, but to no avail, because it had been hours and it was still stuck on the same spot. So I restarted my phone.
Well, then upon my phone starting, everything was gone in terms of my apps, and the stock gingerbread background was there. I thought, well, maybe it's fine and I'll just restore my apps with TiBu, and everything will be fine. That wasn't the case at all because any app that I downloaded from the market with the exception of a few would automatically force close. So I couldn't get TiBu to work, or Superuser, or anything.
So at that point I knew that I had seriously messed up some files on my phone, and I decided I was gonna flash .sbf. So I got the stock 2.3.4 .sbf and flashed it with RSD Lite 5.3.1.
It flashed gingerbread, and when it rebooted, everything looked fine and dandy, but it was exactly the same problem, where apps would force close.
Then as a last hope of solving the problem I tried to use fastboot to recover my phone with the nandroid backup that I had made, but it said that the image file was too large. And that also probably has something to do with the fact that I can't actually use fastboot to do that unless I have an unlocked bootloader, right?
So my question is, how can I fix it? How can I start over fresh (since flashing .sbf didn't wipe everything) so that those system files that I messed with when I was running the deodexing utility are returned to their proper state?
I mean, at the moment, it works as a phone, it receives and makes calls, and I can send texts and take pictures, and use the stock browser, but no other app will open.
And secondly, has anyone gotten the 120fps video recording working with the d3 camera apk?
But of course, more importantly, how do I get out of this rut?
Thank you so much and I'm really sorry for writing so much, I just wanted to give you as much info as possible so that you could come up with the best answer. And I apologize for my stupidity,
Thanks again,
did you try a factory restore after the sbf flash? you have to do that to restore the phone to the orignal state. flashing the.sbf doesn't do it...
Sent from my MB860 using Tapatalk
thank you so much, after doing the factory reset, it works fine now. Now to go mess with it again hehehe.
Sent from my MB860 using XDA App
Glad your sorted as to your fastboot problem. Use moto fastboot as it splits large files for you.
Sent from my MB860 using XDA App
So, I thought I had fixed the problem, but after unlocking the bootloader, I installed Alien, and the radio is all wonky...I'm not getting service 99% of the time, and that's kinda really bad, and, yes I checked the APNs, and there were no problems there (at least I think, I restored default) and I even tried flashing a radio, which made no difference. And I know that flashing using RSD is bad but I didn't know better at the time so I reflashed stock Gingerbread 4.5.91, but the radio problem is still there.
And could someone tell me what I'm doing wrong because I've tried flashing two different roms (Alien and the Star Wars one) and it seems as if its not actually doing everything that it should, for example the star wars one, there is no camera app, or rather it force closes, and the bootanimation and boot image are stock at&t, and the lockscreen is default....and I even checked the build.prop which should have been modified for the d3 camera and it wasn't modified, which led me to think that anything that involved root access didn't work when flashing the rom. Further proof for that idea is that after I flashed either rom, I lost root access and had to re-root my phone.
This is really weird, and it's starting to bug me because now my phone can't even be used as a phone
Thank you for your help.
Related
Although I only had the phone for a day now, I've been reading the forum for a month trying to get the info I needed so that when it arrived, I'd be able to load up froyo, wifi calling and be done quickly. I set it all up and downloaded ryan's OCLF, ran it, rooted, installed the ext files, then the v2 lag fix it said to. Everything was great.
Later I downloaded a few apps and titanium backup, but didn't back up yet. I ran the battery down low. Went into the clockwork app that I downloaded and did a backup restore.
About an hour later the battery finally died. I read that you should turn it on until it won't anymore before finally plugging in to charge and wiping the battery settings. Problem is it wouldn't boot up again. Hung on the Galaxy S screen with the shining S.
I could still reboot into recovery and into download. Was going to ODIN back, but my PC was giving me trouble. I pulled the micro sim and thre the ASOP 2.2 rom on it from another laptop dragged it to card removed and popped it back in. I tried to reboot to recovery which worked, then reinstall, nothing. Tried to get to the SD card, but it doesn't find it.
Finally gave up and went back into recovery and did a factory data wipe reset or whatever it is called. When the phone rebooted it all booted fine, no problems at all however I lost every setting account etc..
So here's where I'm at now, i mounted it as USB and looked at the phone from the PC, in the clockwork folder is my backup I just can't get it to load.
I went back to the market and redownloaded the ryan OCLF and removed the lag, ext and root and I'm back to stock. Phone will turn off and back on.
What now? Where did I go wrong, it doesn't make any sense, I followed every instruction exactly as it was written.
I'm a little concerned to root again, but I want to backup settings, accounts etc.. in case this happens again.
first...welcome to XDA...the baddest forum on the planet...
second....this is the wrong section for this topic....should be in Q & A section...but a Mod will take care of that....
third....read this.....http://forum.xda-developers.com/showthread.php?t=849028
the author worked hard on this to become a sticky so noobs will see it first...if u need more info....there is another sticky in the general section...good luck!!
Thanks, I'll read through it now. I thought I had a good idea to drag the new rom to the sd card and fire it up from there, but it failed. Happy I didn't brick the phone. I saw a lot of posts saying ODIN was the only way back, guess I got lucky with the data wipe.
I've had iphones for 2 years and when this happened it would be a conflict with programs, is there a list like that for android like there was for cydia in the iphone info?
I don't know.... but make sure you read carefully before you flash... in a nutshell the steps for ROM flashing is.
1. Root
2. Download and install ROM Manager from market
3. Flask clockwordmod recovery
4. Nandroid (backup)
5. Backup SD card to pc(just in case)
6. Flash your ROM from clockworkmod recovery.
Sent from my XDA app cuz I'm stalking your mom....
Here's a question I don't think is answered after reading the post. So rooting via OCLF without installing the lag fix v2 is exactly the same as rooting by dragging and dropping.
Rooting in itself can't cause the phone to not reboot, but if you flash incorrectly or apply lag fix and flash over them you could run into trouble. I just can't seem to figure out where the error was. I didn't delete the update zip after rooting, thats the only error I see.
Other issue I noticed is that on mounting to USB after booted I can see the backups, but I can't locate the ROM zip I put on the SD card or the SD card at all.
So let me get this straight... you rooted via OCLF.. but did not apply the lagfix?
Edit: oh I see... u tried to flash a froyo Rom then go back to stock?...
Sent from my XDA app cuz I'm stalking your mom....
No I rooted then applied the lag fix it had available which was version two I believe
Sent from my SGH-T959 using XDA App
Ok... try ODIN back to stock...make sure you have the correct drivers
Sent from my XDA app cuz I'm stalking your mom....
Let me correct what I'm saying, the phone went into the stuck glowing S screen when trying to turn it back on after I ran the battery down to nothing. It wouldn't boot past that point. I tried reinstall, reboot, etc..from the menu in clockwork recov in recov screen as that was all i could get to. When that failed I tried just loading a 2.2 ROM to the sd card direct from my laptop, thought I could just flash from that screen right over everything, didn't work either. Thats when I tried delete all info as a last effort, but then it magically booted back 100% stock, but still rooted. So i reloaded OCLF and unrooted because I don't know what caused the phone to be stuck in the S screen, I didn't flash anything, just did the root and oclf all from ryan's OCLF app
I tried to reroot manual, didn't work, lots of issues, wouldnt root. Went back for OCLF gone. Went for the z4 gone. Found links for both, tried the z4 didnt' work, superuser continiously popping up for permissions, went back removed that and reloaded oclf from web, ran and fixed boot and rerooted, all good. Went back and downloaded and flashed Vibrant AOSP ish JK2 1.1 Official FROYO. Absolutely love it so far. I've been waiting for wifi calling for a long time, it actually works. Problem is I'm not really sure if I rebackup everything now or leave the backups I have from clockwork for stock. I keep reading everything and feel like I'm missing something. I have Vibrant AOSP ish JK2 1.1 Official FROYO saved so I guess if it crashes I just reflash that and don't need a backup, but should titanium backup the whole thing instead now? Sorry if no one replies i get it. Two years of iphone jailbreaking is a waste, nothing like this at all! I will say I never bricked an iphone, feel like i'm gonna brick this thing.
I want to run the OCLF v2, but concerned it's going to cause issues as it's running so smooth right now.
It works fine
Sent from my SGH-T959 using XDA App
version 2 isn't an option, i'm running lag fix one, seems ok I'm having some other issues, but its running
If your still having problems odin back to stock and start over it always safer and will cause less problems
Sent from my SGH-T959 using XDA App
All my issues were because busy box was messed up, all good now
Sent from my SGH-T959 using XDA App
Just to throw it in there... you should always backup your current ROM and all apps using both ROM Manager AND Titanium Backup. It makes it THAT much easier if you do, by chance, have to use ODIN or run a recover, to get your settings, apps, saved data, etc. back without much hassle.
I run a Titanium backup on all of my apps I have loaded (NOT SYSTEM APPS as they are backed up by ROM manager I believe) once a month or so, just to keep fairly recent. It makes it to where, if it does need to be restored, the apps all get re-installed at once including saved data within the app (saved game progress, etc.). This is handy because you don't have to remember what all you had installed and you don't have to go searching through marketplace to get those apps back.
If you are running a custom homescreen (Launcher Pro, etc.), you should also use their backup option to save your homescreen settings.
In short, backup everything you can... it makes 3 hours worth of reloading things condense into a nice little 10-15min "install", "ok" button pressing fiesta!
And, to let you know, I've (as just about 100% of XDA users) flashed, and ODIN'd nearly a thousand times and have yet to brick a phone. These things are crazy indestructible. There's 3 or 4 different ways to get into Download Mode if you get the computer!phone screen... so don't worry about it. The only thing you really lose is time spent getting things back to normal if you screw up. But read up on everything, which it sounds like you already do, before you even attempt anything that could kill the phone. I don't post much on here because just about everything is already answered... you just have to search a little bit.
OK, Heres the scenario, This is a replacement T-959 vibrant, sent from either TMO or Samsung, really not sure! My 1st phone never had any issues with modding, and always cooperated! Until I used KIES to update one day and It bricked, because of primary and SBL corruptions. [I know!!, found out 5 mins too late about using KIES] Anyway, since Ive had this replacement phone its done nothing but fight me from the start, never has acted right I think and I feel there's something wrong HW wise with it. My problem with it now, is it wont accept any other custom ROM I try to install, and only works with either 2.1 or 2.2 stock OEM ROM's. Meaning, Anything else ROM wise, It wont go past the last part of boot sequence, and just keeps looping, and does it over and over again! Ive tried all of Simple Honeys, Toxic 8's Roms, and each time it goes thru the loading successfully, and then starts it boot-up, but every single Flash Ive done, ROM wise, it hangs up and loops at the very last part of booting up. Ive come to realize now, it isn't the ROMS, but the phone " I THINK" Each time I tried a Custom ROM install, I started with stock fresh JFD install, and wiped and cleared out everything before starting another ROM install, but with each attempt that I try to go past anything other than Froyo stock, It does this boot loop problem at the final part!! It seems like who ever sent it to me, did something to the phone to prevent this. Modding it I mean. like right now I'm on Eugenes Froyo, with the 2E RECOVERY, It was working fine, until I upgraded the Eugenes kernel, which is suppose to work with this ROM, technically the phone still runs, but as soon as I did this, I now cant get into the two drives as mass storage to tranfer files, says insert disk, like as if its a CD Rom drive, WTF!! And like I said, this phone wont accept any other ROMS now, past stock Eclair or Froyo OEM and kernels as well. I don't understand what the problem is, My guess is they flashed something to prevent modding or its just a corrupted HW issue, anybody ever seen this before. I wish I had just JTAG'd my first phone with Josh over at Mobile Tech, and saved myself all this heartbreak and frustration, but its too late for that now! So anyway, I need to determine for sure if this phones screwed, HW wise or if there is SW to get this phone straighten out, to where it'll work right like my first one used to, and begin to accept custom ROM's like it should be able to do!! I'm at my last end with this phone, and I'm desperate to get a solid reason/answer for whats happening here, because Ive followed all the instructions and standard procedures to insure that all the attempted installs of the ROMS I mentioned go correctly. And its boiling down to either HW issues or a SW issue they created before they shipped it to me, or last but least hopefully a SW fix here, that can get the HW/phone to act right again, and maybe salvage this phone, otherwise I'm thinking I need to buy another brand new phone and hope for the best. I just don't want to be stuck and limited with Froyo stock, for the rest of my time using this phone, I want my freedom to choose again, like I had before, and also It ran so much better than OEM anyways!
Go back to stock using the sticky on the q&a then root using that same methOd and when you flash a custom room make sure you wipe dalvik and cache and delete user data
Sent from my SGH-T959 using XDA App
Quote" Go back to stock using the sticky on the q&a then root using that same methOd and when you flash a custom room make sure you wipe dalvik and cache and delete user data"
If you had picked up on it in my post, have already done this dozens of times!! Oh and BTW, when at JFD = 2.1 Eclair, it wont allow the 2 drives access to in Cabled USB mass storage, and therefore unable to CWM flash with zips, then I must go to 2.2 Froyo next to be able to get past that problem, but again when I go from there to any custom ROM, it fails to boot at the very end, and starts its looping. Again, the 1st phone I had, never ever, behaved like this!! Same phone but, different dates of manufacturing and also this one came from either Samsung or TMO in Plano,TX where that's all, they do is send out phones for replacement, and this one wasn't in a original box, something they worked on, grabbed off the shelf, and sent to me!! Its just a shame that 99% of all the ROMS are in zipped form, instead of TAR files, at least then I could've tried flashing some of them from, Eclair to see if that made a difference, but when they are zipped, you must use CWM recovery to flash, and thus again presents another problem as far as what I'm going thru here!
Got any thing else, Idea wise, that actually hasn't been tried yet, that makes sense??
OK, Ive made some progress, It seems for whatever stupid reason, that unlocking my phone, [jailbreaking] was the culprit of this phones renegade behavior, I simply restored it back to a locked status as a TMO provider, and Wholla, the phones now acting right!! And I have been able to get it to the ROM I wanted and flash a better kernel as well with 0 defects!!! And then I jailbroke it again, and its working flawlessly.
Personally I don't understand why that had a bearing on its behavior, but nun the less it did. And has cause me a few extra wrinkles around my eyes in stress trying to figure this out by myself, especially when all the suggestions and procedures I did was for nothing, until this phone was restored to a locked condition again!!
Go figure Right???? Grrrrrrrrrrrrr!!!! Anyway I hope mentioning this will prevent someone else in losing their hair or sanity!!
hello i think we have the problem, i also have openline my vibrant to be able to use here in our country.. i have 2.1 eclair, i just want to know what 2.2 ROM did you used coz you've said that it's ok to upgrade it to 2.2, but not other ROM, where did you get it.. can you pm me the link
thanks
Ok, so I readily admit that I'm the jackass the n00b video was aimed at. I thought I understood what I was doing, and clearly didn't. Now I can't get my phone to do ****.
I was attempting to flash the new CM9 beta. First time I've attempted to flash anything.
was on 2.3.5.
rooted using the 2.3.5 root method.
SBF-ed to 2.3.4. (prob didn't need to root on 2.3.5 if I was going to sbf to 2.3.4, but I'm an idiot)
SBF went fine. then I messed up good.
at the end of Moon Shadow's SBF tutorial he said he recommends the full factory reset, so I did it.
so now...I have no phone service. looking at settings/about phone it doesn't know my phone # and I have no idea how to fix this. not sure what other problems will present themselves after that, but that's the big issue. I'm connected to my home network, so at least I have some data connectivity.
before starting...
I made a backup with Clockwork Recovery, but that backup seems to be gone.
I made a backup with Go Backup, and that seems to still be there, but it was a 2.3.5 backup...how can I get to that and will it fix my problem?
ideally right now I'd just like to go back to the Go Backup backup I made before starting any of this and then I can reconsider where to go next.
additionally, I thought about just going forward, but I cannot for the life of my figure out how to flash this CM9 ROM, despite having read the directions 15 times. I tried to use Clockwork to install it from SD, but when I try that I can't see the .zip, despite having copied it over.
Can anyone take pity on a n00blet, or point me to a thread with information on how to solve this (I searched and had trouble finding anything useful)?
Very appreciative of all help.
Croda said:
Ok, so I readily admit that I'm the jackass the n00b video was aimed at. I thought I understood what I was doing, and clearly didn't. Now I can't get my phone to do ****.
I was attempting to flash the new CM9 beta. First time I've attempted to flash anything.
was on 2.3.5.
rooted using the 2.3.5 root method.
SBF-ed to 2.3.4. (prob didn't need to root on 2.3.5 if I was going to sbf to 2.3.4, but I'm an idiot)
SBF went fine. then I messed up good.
at the end of Moon Shadow's SBF tutorial he said he recommends the full factory reset, so I did it.
so now...I have no phone service. looking at settings/about phone it doesn't know my phone # and I have no idea how to fix this. not sure what other problems will present themselves after that, but that's the big issue. I'm connected to my home network, so at least I have some data connectivity.
before starting...
I made a backup with Clockwork Recovery, but that backup seems to be gone.
I made a backup with Go Backup, and that seems to still be there, but it was a 2.3.5 backup...how can I get to that and will it fix my problem?
ideally right now I'd just like to go back to the Go Backup backup I made before starting any of this and then I can reconsider where to go next.
additionally, I thought about just going forward, but I cannot for the life of my figure out how to flash this CM9 ROM, despite having read the directions 15 times. I tried to use Clockwork to install it from SD, but when I try that I can't see the .zip, despite having copied it over.
Can anyone take pity on a n00blet, or point me to a thread with information on how to solve this (I searched and had trouble finding anything useful)?
Very appreciative of all help.
Click to expand...
Click to collapse
ok, noob found thread about activation and fixed that part.
now I'm hoping I can just go back to 2.3.5 and apply my backup.
Lol, first take a deep breath. Your phone is not hosed, it's actually working like it's supposed too.
After you sbf, you phone is back to it's factory state right? So remember when you got your phone for the first time you had to have it activated/programmed. If you're on Verizon then dial *228 and follow the directions, takes about 5 minutes. This will give you back service and your phone number.
Second, the droid x2 is unique and requires a few different steps than most phones to flash things because it has whats called a locked, encrypted bootloader. So with the X2 you will NEVER want to use Rom Manager (Clockwork Mod Recovery) or Rom Toolbox. They just do not work with our phone yet.
Your going to want to read this link: http://www.droidxforums.com/forum/droid-x2-support/41785-common-x2-questions-answers.html
It gives a good overview of how the X2 works and explains a lot of things.
Then go here: http://forum.xda-developers.com/showthread.php?t=1318083
This explains how to install and get into the X2's special Bootstrap Recovery. This is where you will make backups, restore backups, and flash new roms. The thread explains in great detail how to make and restore backups in Bootstrap Recovery.
oh man, thanks a bunch lead off.
that whole deal with the boot strap is something that I never saw in all the reading I did and probably solves a lot of my problems. I'll do what you said (starting with the deep breath) and begin again.
thanks again for the help.
Yea no problem
Hello everyone. I'm a noob.
I have a Droid X2 and Verizon service. It was running Gingerbread 2.3.5 and version 1.3.418, and up until yesterday I hadn't even rooted it. I followed these instructions for CM10 carefully but apparently made a slight mistake.
I made sure to root properly: Superuser worked perfectly, I had Busybox, NANDroid, and Bootstrap Recovery all working, and the phone worked just like before.
In the tutorial I linked to above, I think I know where I went wrong. I downloaded GAPPS 4.2.2 (funky wording since he said 'latest' and then '4.1.x' , so not the latest) and then CM10 A3. I then went into BSR and installed from the external SD card. GAPPS succeeded, but CM10 did not (Status 7, some kernel disapproval or something). When I booted the phone after that, MultiTouch keyboard couldn't start and so I just froze it with Titanium Backup and used Swype because it was annoying. The next thing I tried came from another xda thread (that I seem to have misplaced) saying that removing the top 2 lines of META-INF/com/google/android/updater-script would make it work. I'm pretty sure this failed similarly to before. I then tried wiping all data (since I had backed it up 3 different ways) and installing CM10. It still didn't work, and when I booted I got to my current state of purgatory.
Now when I boot, it tries to run the initial setup but that crashes (and multitouch keyboard crashes too). I've probably lost root access and currently don't have Titanium Backup or any other method to restore from backup since the programs were wiped. I've been trying to do an SBK factory reset using RSD Lite, but the phone won't go into RSD mode.
At this point I just want a working phone again and I'm not sure what to do.
TL;DR: Used the wrong GAPPS version when installing CM10 A3, decided to wipe all my data and try the install, now I'm stuck in neutral.
I guess the internet lied and gave me the wrong SBK the first time. Setup did work, and it wasn't RSD like I had thought.
I still would like to know what went wrong the first time through, and why it seemed like I wasn't able to overwrite the incorrect GAPPS version I had first installed. Once I saw my mistake I did use the correct version and nothing changed.
Dasoccerguy said:
I guess the internet lied and gave me the wrong SBK the first time. Setup did work, and it wasn't RSD like I had thought.
I still would like to know what went wrong the first time through, and why it seemed like I wasn't able to overwrite the incorrect GAPPS version I had first installed. Once I saw my mistake I did use the correct version and nothing changed.
Click to expand...
Click to collapse
Did you get it working then? Were you running A2 before hand?
Dasoccerguy said:
Hello everyone. I'm a noob.
I have a Droid X2 and Verizon service. It was running Gingerbread 2.3.5 and version 1.3.418, and up until yesterday I hadn't even rooted it. I followed these instructions for CM10 carefully but apparently made a slight mistake.
I made sure to root properly: Superuser worked perfectly, I had Busybox, NANDroid, and Bootstrap Recovery all working, and the phone worked just like before.
In the tutorial I linked to above, I think I know where I went wrong. I downloaded GAPPS 4.2.2 (funky wording since he said 'latest' and then '4.1.x' , so not the latest) and then CM10 A3. I then went into BSR and installed from the external SD card. GAPPS succeeded, but CM10 did not (Status 7, some kernel disapproval or something). When I booted the phone after that, MultiTouch keyboard couldn't start and so I just froze it with Titanium Backup and used Swype because it was annoying. The next thing I tried came from another xda thread (that I seem to have misplaced) saying that removing the top 2 lines of META-INF/com/google/android/updater-script would make it work. I'm pretty sure this failed similarly to before. I then tried wiping all data (since I had backed it up 3 different ways) and installing CM10. It still didn't work, and when I booted I got to my current state of purgatory.
Now when I boot, it tries to run the initial setup but that crashes (and multitouch keyboard crashes too). I've probably lost root access and currently don't have Titanium Backup or any other method to restore from backup since the programs were wiped. I've been trying to do an SBK factory reset using RSD Lite, but the phone won't go into RSD mode.
At this point I just want a working phone again and I'm not sure what to do.
TL;DR: Used the wrong GAPPS version when installing CM10 A3, decided to wipe all my data and try the install, now I'm stuck in neutral.
Click to expand...
Click to collapse
you state in the beginning that you are on 2.3.5. it is crazy that you were even able to flash cm10. it is made for 2.3.4 . and DZKs OP on cm10 is a bit sketchy in the wording and severly outdated.
there are a few things you need to do in order to get BSR working inside of A3 , as well as needing the GAPPS for 4.1.X and not 4.2.2 this is only cm10 , not 10.1 .
you need to SBF back to 2.3.4 (google EZsbf for droid x2) it is way easier than trying to use rsdlite for a "noob" , and then root. then follow the steps you completed to get where you are now, except use the right gapps.
THEN: (this is not in the OP for cm10 ) , perform THIS : http://forum.xda-developers.com/showpost.php?p=37698274&postcount=1573 in order to get the patched cm7 bootstrap working. DO NOT try to use the regular BSR .
i can try to help as i get back to my computer here and there, but hopefully others pitch in , as i dont have that much time. hope this helped.
Simpsons11 said:
Did you get it working then? Were you running A2 before hand?
Click to expand...
Click to collapse
I got back to 2.3.5 and restored all my apps and data, so I called it a night. Well... the sun had come up, but same idea. Like I said, up until yesterday I had yet to even root the phone, so I was just running the stock version of Android given to me by Verizon.
Lorenzo VonMatterhorn said:
you state in the beginning that you are on 2.3.5. it is crazy that you were even able to flash cm10. it is made for 2.3.4 . and DZKs OP on cm10 is a bit sketchy in the wording and severly outdated.
there are a few things you need to do in order to get BSR working inside of A3 , as well as needing the GAPPS for 4.1.X and not 4.2.2 this is only cm10 , not 10.1 .
you need to SBF back to 2.3.4 (google EZsbf for droid x2) it is way easier than trying to use rsdlite for a "noob" , and then root. then follow the steps you completed to get where you are now, except use the right gapps.
THEN: (this is not in the OP for cm10 ) , perform THIS : http://forum.xda-developers.com/showpost.php?p=37698274&postcount=1573 in order to get the patched cm7 bootstrap working. DO NOT try to use the regular BSR .
i can try to help as i get back to my computer here and there, but hopefully others pitch in , as i dont have that much time. hope this helped.
Click to expand...
Click to collapse
I wasn't able to flash CM10. I was able to flash GAPPS 4.2.2, but then unable to flash GAPPS 4.1.x over that installation.
And is it really that outdated and sketchy? The version of CM10 I was trying to flash was made on January 11, 2013. Correct me if I'm wrong, but Gingerbread 2.3.5 is almost 2 years old now, right? It's surprising that I'd have to go back to the previous version.
I may try out your suggestions later, but 8 hours of fiddling with my phone yesterday wore me out a little (a lot). Thanks!
Dasoccerguy said:
I got back to 2.3.5 and restored all my apps and data, so I called it a night. Well... the sun had come up, but same idea. Like I said, up until yesterday I had yet to even root the phone, so I was just running the stock version of Android given to me by Verizon.
I wasn't able to flash CM10. I was able to flash GAPPS 4.2.2, but then unable to flash GAPPS 4.1.x over that installation.
And is it really that outdated and sketchy? The version of CM10 I was trying to flash was made on January 11, 2013. Correct me if I'm wrong, but Gingerbread 2.3.5 is almost 2 years old now, right? It's surprising that I'd have to go back to the previous version.
I may try out your suggestions later, but 8 hours of fiddling with my phone yesterday wore me out a little (a lot). Thanks!
Click to expand...
Click to collapse
the OP for cm10 hasnt really been updated since alpha 1 . so yeah it is outdated. alpha 2 had a non working wifi module that was never even mentioned in the OP and had to be figured out by the droid x2 community. alpha 3 had the working wifi back in, but did not have the proper Hijack.zip in place in the system files, whereas the old versions did. this was also never mentioned in the OP.
watch this video. it may help.
http://www.youtube.com/watch?v=HJdvyufvYp0
the dude who made this video also has DOZENS of how-to videos for the droid x2 on his channel. just search for it on youtube. (ex: how to sbf droid x2)
sbfing your phone to 2.3.4 , using EZSBF , shouldnt take more than 15 minutes.
2.3.5 re-introduced a lot of issues that we had with 2.3.4, so most devs base their roms around 2.3.4. in fact, there are really only two roms for 2.3.5 worth trying out, Eclipse, and gingerbread phone , 7 and they are both gingerbread. :crying:
if you read up on what needs to be done, the whole process of SBF, ROOT, and flash cm10 THEN gapps, should all take less than an hour, even for someone who is fairly inexperienced.
i wasnt trying to dog DZK's post for cm10. i was only stating that if you follow HIS instructions, it is confusing as hell.
Lorenzo VonMatterhorn said:
the OP for cm10 hasnt really been updated since alpha 1 . so yeah it is outdated. alpha 2 had a non working wifi module that was never even mentioned in the OP and had to be figured out by the droid x2 community. alpha 3 had the working wifi back in, but did not have the proper Hijack.zip in place in the system files, whereas the old versions did. this was also never mentioned in the OP.
watch this video. it may help.
youtubelink
the dude who made this video also has DOZENS of how-to videos for the droid x2 on his channel. just search for it on youtube. (ex: how to sbf droid x2)
sbfing your phone to 2.3.4 , using EZSBF , shouldnt take more than 15 minutes.
2.3.5 re-introduced a lot of issues that we had with 2.3.4, so most devs base their roms around 2.3.4. in fact, there are really only two roms for 2.3.5 worth trying out, Eclipse, and gingerbread phone , 7 and they are both gingerbread. :crying:
if you read up on what needs to be done, the whole process of SBF, ROOT, and flash cm10 THEN gapps, should all take less than an hour, even for someone who is fairly inexperienced.
i wasnt trying to dog DZK's post for cm10. i was only stating that if you follow HIS instructions, it is confusing as hell.
Click to expand...
Click to collapse
Thanks for the link. I remember watching one of his videos yesterday for something, but apparently this was the one I needed! He does have another video on how to SBF back to 2.3.4, so I think I will just go for it right now.
Also yesterday it only took so long because I had to figure out what mess I had gotten myself into before I could figure out how to figure out what to do. This definitely looks like it shouldn't take more than an hour. :good:
I do have one quick question about backups. NANDroid is a full system backup, including the OS, right? And Titanium Backup is for apps and data? Therefore I should be able to restore all of my apps and data into Android 4.2.1 with Titanium, right? I at least know how to get back to 2.3.5 and restore my data if I can't restore it in 4.2.1, but I'd rather not have to go through this process again if I find out that Titanium can't restore everything.
(haha... I couldn't quote you because of the outside link and my 'xda noob' status )
Dasoccerguy said:
Thanks for the link. I remember watching one of his videos yesterday for something, but apparently this was the one I needed! He does have another video on how to SBF back to 2.3.4, so I think I will just go for it right now.
Also yesterday it only took so long because I had to figure out what mess I had gotten myself into before I could figure out how to figure out what to do. This definitely looks like it shouldn't take more than an hour. :good:
I do have one quick question about backups. NANDroid is a full system backup, including the OS, right? And Titanium Backup is for apps and data? Therefore I should be able to restore all of my apps and data into Android 4.2.1 with Titanium, right? I at least know how to get back to 2.3.5 and restore my data if I can't restore it in 4.2.1, but I'd rather not have to go through this process again if I find out that Titanium can't restore everything.
(haha... I couldn't quote you because of the outside link and my 'xda noob' status )
Click to expand...
Click to collapse
a nandroid backs up the OS as well as all apps and data, but that only helps you if you are modding/messing with that specific rom. so yes, TB is the way to go for restoring apps across roms. glad to point you in the right direction! report back once youve made the jump. :fingers-crossed:
Success!
I used Tomsgt123's tutorials and they were fantastic. First I had to install the 2.3.4 SBK and then CM10 and Gapps. I'm currently running Titanium Backup and it's working flawlessly.
I did have one hiccup earlier though. I noticed that my contacts weren't backed up, and apparently I had disabled the online contact backup also. I was hoping that I could do a NANDroid restore, backup my contacts, and then go through with the CyanogenMod installation. But, the restore kept hanging and refused to finish. I tried 3 or 4 times, and on the last try I restored by section and it was the data section that caused the hang.
So, I'll have to rebuild my contacts list a little bit, but since SMS was backed up I'll at least get the people I care about . Cyanogen is pretty sleek and so far it's been noticeably faster than Gingerbread. I was constantly getting a low framerate just navigating my mainscreen before, and that's one of the reasons I was inspired to try out Jellybean or just anything newer. I can't make any claims about battery life yet since I haven't unplugged it, but other reviews said the battery can last more than twice as long which is fantastic.
I can't thank you enough, Lorenzo, for pointing me in the right direction. :highfive:
Dasoccerguy said:
Success!
I used Tomsgt123's tutorials and they were fantastic. First I had to install the 2.3.4 SBK and then CM10 and Gapps. I'm currently running Titanium Backup and it's working flawlessly.
I did have one hiccup earlier though. I noticed that my contacts weren't backed up, and apparently I had disabled the online contact backup also. I was hoping that I could do a NANDroid restore, backup my contacts, and then go through with the CyanogenMod installation. But, the restore kept hanging and refused to finish. I tried 3 or 4 times, and on the last try I restored by section and it was the data section that caused the hang.
So, I'll have to rebuild my contacts list a little bit, but since SMS was backed up I'll at least get the people I care about . Cyanogen is pretty sleek and so far it's been noticeably faster than Gingerbread. I was constantly getting a low framerate just navigating my mainscreen before, and that's one of the reasons I was inspired to try out Jellybean or just anything newer. I can't make any claims about battery life yet since I haven't unplugged it, but other reviews said the battery can last more than twice as long which is fantastic.
I can't thank you enough, Lorenzo, for pointing me in the right direction. :highfive:
Click to expand...
Click to collapse
thats awesome. i loved the feeling when i first flashed a new rom on this phone. glad you got it figured out. make sure to thank Tomsgt for his videos as well . hes a cool dude and put a lot of time into it.
as for battery life, its kinda a bit rough on cm10. i wouldnt say twice as good. that would be too good to be true...lol . but if you limit your apps, it shouldnt be that much worse.
one thing, to improve performance, under settings, go to developer options, and near the bottom there is background processes. its set at standard limit by default. change it to three at most. this will make a noticeable improvement in performance, but will also need to be re-set at 3 at most if you ever reboot/power off.
glad i could help! :highfive:
Hello,
History:
Recently my Droid x2 was acting somewhat slow and randomly rebooting, so I decided to backup some data using titanium backup.
After which, I performed a factory data wipe thing from the android recovery menu.
This went well and I started to restore my old apps and data, afterwards I noticed the same things happening again. So I decided to do the factory data wipe again to fix this.
This led me to think that there was something wrong with one of the system apps, so I slowly went through apps and only installed what I thought I needed.
I ended up repeating this a few times, and at some point used titanium backup to remove some of the stock apps like slacker and youtube.
And now my phone wont get past the motorola logo, although sometimes it does and gets into a boot loop or just gets to the first time set up screen.
History summary:
Basically I backed up the data I wanted to keep, and did some stuff now my phone doesn't function right.
What I am after from any expert is whether or not I can't simply put an update onto my sd card and use the android recovery menu to fix my phone back to the normal stock rom.
If this kind of thing is possible could someone send me a link to the file.
I have tried to use Moonshadows guide (http://forum.xda-developers.com/showthread.php?t=1317707) for SBFing, no luck, can't get it to work.
Also, I am basing this question off of Moonshadow's other guide (http://forum.xda-developers.com/showthread.php?t=1318083) for backup/restoring.
This is a:
Droid X2
Rooted
Running 2.3.5
Moto Updates only work to update, and phone must be complete stock, nothing removed.
to flash sbf phone needs to be in STARTING RSD PROTOCOL SUPPORT
Try ezSBF for dx2
Sent from my XT862 using Tapatalk
just an update
Just in case anyone is curious, ezSBF worked.
I used it, then updated my phone to 2.3.5, and rooted it.
Thanks shadow.
Your welcome, glad it worked
Sent from my XT862 using Tapatalk