Anyway to fix my brick? I used Odin to restore my phone back to stock, and then used kies to update it back to the latest (none rooted) build, after said it was done and needs to restart but my phone was black screen and now wont turn on. No matter how long it charge/hold down any combination of buttons / anything it does no turn on not even light up black its like if it is completely dead, can anyone tell me how this could have happened everything updated fine.
I don't know how it could have happened, we take your word for it. I know you said you tried different button combinations, but have you tried to get into download mode? If that doesn't work, try using a jig to induce the phone into download mode. If that doesn't work, you can probably have it jtagged. Or buy a nexus s )
Sent from my Nexus S using XDA App
Yes I can't get no response not even download mode, ok how do I jig and jtag? any guid so n how to do it, i'll try anything before having to run to tMobile and saying an update broke it lol
It sounds like you destroyed the bootloader. I was in the same situation when I flashed the GB bootloader by checking the reboot checkbox. To get back, I removed the battery, hold vol up + vol down + power, launched odin, plug usb, and slide the battery in.
tanner2007 said:
Anyway to fix my brick? I used Odin to restore my phone back to stock, and then used kies to update it back to the latest (none rooted) build, after said it was done and needs to restart but my phone was black screen and now wont turn on. No matter how long it charge/hold down any combination of buttons / anything it does no turn on not even light up black its like if it is completely dead, can anyone tell me how this could have happened everything updated fine.
Click to expand...
Click to collapse
Tried it, and just tried it again, no luck, no response, im almost certain its hardbrick, and I am willing it jtag it if I can =/
Try the following steps:
1. Removed the battery
2. Plug the usb to you pc and phone
3. Hold vol up + vol down + power
4. Slide the battery in
tanner2007 said:
Tried it, and just tried it again, no luck, no response, im almost certain its hardbrick, and I am willing it jtag it if I can =/
Click to expand...
Click to collapse
VibrantThemer said:
Try the following steps:
1. Removed the battery
2. Plug the usb to you pc and phone
3. Hold vol up + vol down + power
4. Slide the battery in
Click to expand...
Click to collapse
I did that, many times....
Watch this video --> http://www.youtube.com/watch?v=rqxearzXrVY
tanner2007 said:
I did that, many times....
Click to expand...
Click to collapse
I kno sir, Iv been in that mode many, many, many times, this time nothing on my phone works...its dead
How old is the phone? Could it still be under one year warranty from Tmobile? If it is still within one year call up and tell them you tried to update with Kies and it screwed your phone.
Sent from my SGH-T959 using XDA App
archie53 said:
How old is the phone? Could it still be under one year warranty from Tmobile? If it is still within one year call up and tell them you tried to update with Kies and it screwed your phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It is, small problem, small crack on lower left part of screen, almsot not noticable but with that idk if im have to pay some huge amount of money with I don't have and if i have to id rather by a new phone..
I was in the same situation. Any of the methods mentioned before don't worked for me because you have a hard brick.. your only option is a RIFF Box JTAG.
I send my phone to this ebay seller and he repair my phone the same day and the same day he ship me back my phone.
http://cgi.ebay.com/Samsung-Galaxy-...ultDomain_0&hash=item3f0c87e20b#ht_719wt_1344
If the item expired on ebay you can find the seller items in here:
http://shop.ebay.com/olegor215/m.html?_trksid=p4340.l2562
or search for the sellers name ( olegor215 )
Sorry for my bad english
Related
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
What were you flashing to stock from?
Can you enter download mode?
Sent from my GT-I9000 using Tapatalk
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
letor69 said:
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
Click to expand...
Click to collapse
Following these guide: http://forums.t-mobile.com/t5/Samsu...-upgrade-to-Android-2-2-Froyo-now/td-p/678871
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
No I can't enter Download mode. I have no power at all.
nomadrider123 said:
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Have you tried a simple
pull the battery
put the battery back after a few second
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
http://www.youtube.com/watch?v=E9LYLoK1Qog
http://www.youtube.com/watch?v=qNts11IBZ8Y
I click the power button nothing happens. I plug in the usb, nothing happens.
Timz917 said:
I click the power button nothing happens. I plug in the usb, nothing happens.
Click to expand...
Click to collapse
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
nomadrider123 said:
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
Click to expand...
Click to collapse
SAME AS ME heeeeeeelllpppp
not a single button is working, either JIG i have it, what can i do?
Sorry to disappoint you; it seems that you are out of luck. I was flashing my Vibrant in the similar situation like yours and my phone has never turned on again since then (6 weeks). I live in Thailand and have been searching both English and Thai version for a solution. None comes up so far. The only way the USB jig will help is your phone can be powered up. I have tried that myself. You can look for the confirmation elsewhere in this forum. Any way if you can find a diy solution, please let me know and I will post it here if I can find one myself. Thanks!
http://forum.xda-developers.com/showthread.php?t=848737
I am wait on this line here on your link.
More methods coming soon
do you have insurance with tmobile?
i bricked mine before i had a good understanding of the whole rom flashing concept and i could get a downloading screen but i didnt know what to do so they replaced it with no problem.
call and ask all they can do is say no.
nomadrider123 said:
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
HOW ABOIUT LEAVE PHONE CHARGING FOR 10 GO IN TO DARK ROOM SHUT OFF LIGHT PRESS POWER BUTTON AND SEE IF BACK LIGHT OF SCREEN LIGHTS UP, IF SO I TOLD YOU SO I HAD THE SAME BUT MY VIBRANT WORKS AGAIN UNLIKE YOURS p
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Your first option is out because I have tried that. The only option left is the second one. since I live in Thailand, I have to ship the phone to my friend in Los Angeles to have him replace it for me. It is costly, but at least I will get a phone to work.
It seems to me that this issue is a special case that doesn't happen very often. Only the chosen ones will get into trouble like this when making an error here and there while flashing rom.
I had an IPhone 3G before and, of course, I made mistakes while updating it with all kinds of firmware, but the hardware never fails on me no matter what I did.
Thanks all who try to help.
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
nomadrider123 said:
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
Click to expand...
Click to collapse
I'm not getting on your back, why is it you think so?
Most of the users as i've encountered don't have the sense to name their threads appropriately, the OP on this one specifically named it HARD BRICKED, so instead of telling him to do all these instructions, you could've asked 1 thing "when you plug your usb, or wall charger, does it show any lights? or Are there any symbols on the screen? any lights glowing?"
Those 2 questions could've saved him, and you time.
Trust me i'm a beginner as well, i just know how to get out of these because i've been with this problem a few times. Alot of people here know more than me, specifically s15.. idk his full name.
i flashed stock froyo and my phone will not turn on.
already tried the battery pull,combo buttons (download and recovery)
what happened: i flashed back to stock froyo and all loaded successfully with odin.
as it started to reboot the screen went blank.
any ideas?
HELP!!!!
Usb jig if u cant get into dl mode.
Sent from my SGH-T959 using XDA Premium App
Check what you odin'ed...see if it contained sbl.bin.
and what were you flashing from??
Try flashing stock eclair 2.1. And then upgrade your rom from there.
Sent from my SGH-T959 using XDA Premium App
THANKS for all of your suggestion. i tried all of the above an no luck.
So you've already tried the USB jig to access DL mode like @movieaddict suggested and still can't? Thats odd..... What kinda life are you getting out of the phone? Does it turn on at all? How about plugging the USB into the PC or a charger.... anything? spindles or the battery charging icon?
- If the phone is completely dead as in your getting NO life at all then it is in fact HARD BRICKED. I have heard about a JTAG fix for HARD BRICKED Vibrants and I assume its similar to the XBOX360 deal that most of us have probably done in the past, but I have not personally on the Vibrant. I know there is a youtube video/tutorial. Unfortunately thats pretty much all I know about that. I would suggest a google search or search the Q&A threads here for something like:
"Samsung, Vibrant, hard, bricked, jtag"
Good luck!
I would not recommend trying jtag yourself, as you have to rub away a section of the motherboard to access certain solder points and it requires a very expensive jtagging device. If it is truly bricked you can send it to these guys and they will jtag it and bring it back to life for you.
http://www.mobiletechvideos.com/blog/?page_id=778
Already have you on the right page there. It's the second one on that list.
I agree with the above post. Its probably not something everyone should attempt. Although I think most will realize that when you see all that is involved. Here is the thread that I first heard about it:
http://forum.xda-developers.com/showthread.php?p=13981538#post13981538
I'm sure if you PM @connexion2005 would be more than willing to help you out as well. Good luck!
smali26 said:
i flashed stock froyo and my phone will not turn on.
already tried the battery pull,combo buttons (download and recovery)
what happened: i flashed back to stock froyo and all loaded successfully with odin.
as it started to reboot the screen went blank.
any ideas?
HELP!!!!
Click to expand...
Click to collapse
So your phone isn't responding at all? Try holding power and volume +. You might get a screen with orange text on it. This worked for me.
From there you can get to download mode by plugging the phone in and using the three finger method.
kawika said:
so you've already tried the usb jig to access dl mode like @movieaddict suggested and still can't? Thats odd..... What kinda life are you getting out of the phone? Does it turn on at all? How about plugging the usb into the pc or a charger.... Anything? Spindles or the battery charging icon?
- if the phone is completely dead as in your getting no life at all then it is in fact hard bricked. I have heard about a jtag fix for hard bricked vibrants and i assume its similar to the xbox360 deal that most of us have probably done in the past, but i have not personally on the vibrant. I know there is a youtube video/tutorial. Unfortunately thats pretty much all i know about that. I would suggest a google search or search the q&a threads here for something like:
"samsung, vibrant, hard, bricked, jtag"
good luck!
Click to expand...
Click to collapse
no life at all. I have tried holding tHe button for 30 sec. Still not result. also tried the battery on another person vibrant and it worked.
smali26 said:
no life at all. I have tried holding tHe button for 30 sec. Still not result. also tried the battery on another person vibrant and it worked.
Click to expand...
Click to collapse
may i ask what did you flash and what rom was on your phone before. Knowing what was flashed and where you were coming from may probably help us better to understand what is happening.
try press volume down and up button hold it and plug data cable connected to ur computer. That will let u boot to download mode. Try and let me kw how it went.
Same thing happened to me, I was able to fix by the following post...
1. Start AIO toolbox
2. Power off the Phone.
3. Pull the Battery.
4. Plug USB cable into Phone.
5. Plug USB cable into PC.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
The idea is to get ODIN to see your phone again.
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
That's exactly what I would do
Sent from my SAMSUNG-SGH-I717 using XDA App
if you can get into download mode try reflashing the stock recovery found in the dev section then if you can get that fair try flashing the odin stock rom to see if it will boot
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
BLOWNCO said:
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
Click to expand...
Click to collapse
If jig won't work, I'm pretty sure hardware button won't work either. It goes without saying that he probably already tried everything he could find.
edpsx said:
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
Click to expand...
Click to collapse
That's not guinea pig. He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
foxbat121 said:
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
Click to expand...
Click to collapse
Yeah I thought about doing that - worst case scenario they tell me I voided my warranty and give me the phone back and I can still try finding a jtag solution or do i have to face any other consequences including maybe never getting my phone back?
foxbat121 said:
He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
Click to expand...
Click to collapse
That's my guess too. I screwed up badly. I would like to blame it on the late hour I did all that but it was just overexcited stupidity -_-
Try your buttons...
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
brojoe11 said:
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
Click to expand...
Click to collapse
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
cilmeron said:
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
Click to expand...
Click to collapse
I know on some phones that download mode can still be activated even if the screen isn't working properly and displaying it. I know many infuse users ran into problems and were still able to use Odin to flash stock and fix their phone. Try doing the hardware method of getting into download mode, and even though your screen doesn't show anything, it may still connect to Odin and you could try to flash back to stock.
Sent from my SGH-I997 using xda premium
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
mintu123 said:
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
Click to expand...
Click to collapse
Actually, you can brick it to the point of needing JTAG repairs to restore your device. That being said, it's very very very hard to brick it. You have to do something like flash firmware for a completely wrong device and screw up your bootloaders in the process.
cilmeron said:
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Click to expand...
Click to collapse
I've read some so my suggestion is this:
First make sure that you have the drivers installed for your phone. Then pull the battery wait for a few seconds. press the down button and then the power to go in download mode and hold them pressed for 20s. Now plug in the USB and press the volume up button. If Odin detects it you're good to go! If not... Well it's worth a shot
My theory is that even though the screen is blank, the hardware still boots properly. Just make sure your battery is somewhat charged. And also plug in the USB AFTER you "boot" in download mode.
Sent from my SGH-I717R using xda premium
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Click to expand...
Click to collapse
Everything here screams 'you should never attempt to modify your device again.'
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Why don't you find Adam_Outler in the hardware hacking forum? Send your phone to him and he'll hopefully be able to create an unbrickable mod. Not only will you likely have a fixed phone but it will mean volumes for our community.
Note, you will be without a phone for a bit
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
ekerbuddyeker said:
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
It's not that, we've all made mistakes, but it's like this guy went out of his way to try to brick the phone. This isn't like "oh crap, I flashed the wrong radio"
He tried to flash a ROM from a different SoC and every fail-safe wouldn't let him do it. I'm surprised at how well the different programs tried to save his phone, then he actually went ADB and forced it onto his phone and then he unplugs during a flash.
It's like he drove his car without paying attention and hit a fence that prevents you from flying off a cliff, then he kept ramming his car into the fence, then took some C4, blew up the fence, drove off the cliff, then started yelling "help, I fell off the cliff"
N3RD420 said:
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I'm confused, is there a CDMA Note? What do you mean "they won't know it's GSM"?
I dropped my phone a few days ago and the power button stopped working. Reboot ed into recovery from Rom Manager and realized that I couldn't select anything because I need the power button (tried every other button as well; nothing works). Took the battery out and put it back in (the only way to turn it off now) and it instantly booted into recovery. I can't send it to AT&T because I have at least 10 counts and they'll instantly see that CWM is on there.
Please help me!
kancheek1995 said:
I dropped my phone a few days ago and the power button stopped working. Reboot ed into recovery from Rom Manager and realized that I couldn't select anything because I need the power button (tried every other button as well; nothing works). Took the battery out and put it back in (the only way to turn it off now) and it instantly booted into recovery. I can't send it to AT&T because I have at least 10 counts and they'll instantly see that CWM is on there.
Please help me!
Click to expand...
Click to collapse
You dropped your phone. Samsung/AT&T warranty doesn't cover accidents, so there's no sense in worrying about your flash count. You're SOL. But you are free to try of course. Reverting to stock is very easy. What would you even do in recovery mode to revert to stock? Did you bother to look around the forum? There is a guide in the general forum on how to do that.
Out of curiosity, I did a google search to see what the repair options were for a broken power button. Saw that Mobile Tech Videos does it for $35 + shipping. Might be one of the better options at this point. As for the counter, just buy or make a jig to reset it.
mzaur said:
You dropped your phone. Samsung/AT&T warranty doesn't cover accidents, so there's no sense in worrying about your flash count. You're SOL. But you are free to try of course. Reverting to stock is very easy. What would you even do in recovery mode to revert to stock? Did you bother to look around the forum? There is a guide in the general forum on how to do that.
Click to expand...
Click to collapse
They wouldn't know that I dropped it unless I told them that, so as of right now the button stopped working by itself. I reverted to stock a while ago when I thought I bricked it, but I need to get it into download mode which can't be done without the power button.
kancheek1995 said:
They wouldn't know that I dropped it unless I told them that, so as of right now the button stopped working by itself. I reverted to stock a while ago when I thought I bricked it, but I need to get it into download mode which can't be done without the power button.
Click to expand...
Click to collapse
Recovery mode requires the power button. Download mode only requires the two volume buttons. With the phone off, while holding down vol- & vol+ plug in USB cable.
Lawrence of a Labia said:
Out of curiosity, I did a google search to see what the repair options were for a broken power button. Saw that Mobile Tech Videos does it for $35 + shipping. Might be one of the better options at this point. As for the counter, just buy or make a jig to reset it.
Click to expand...
Click to collapse
Good info if I ever need this
Has anybody used mobile tech videos to get their power button fixed? Mine stopped working out of the blue today, my phone is long out of warranty, and it refuses to connect to my computer at all so I can't revert to stock (I'm running AOKP 6.27.12 Build right now). I don't want to just send my phone off to some place that isn't reputable.
elementlaxer said:
Has anybody used mobile tech videos to get their power button fixed? Mine stopped working out of the blue today, my phone is long out of warranty, and it refuses to connect to my computer at all so I can't revert to stock (I'm running AOKP 6.27.12 Build right now). I don't want to just send my phone off to some place that isn't reputable.
Click to expand...
Click to collapse
It's still got to be in warranty with Samsung. The first units were shipped just under 9 months ago.
Mobile tech videos is considered to be quite reputable. I have only seen good reports about them, and the owner posts actively on the XDA-Developers boards.
You should be able to enter download mode. You don't need the power button for that.
Darn I didn't realize how long Samsung's warranties were. I made the switch back in October from Apple products so I'm used to crappy warranties.
I've already shipped to mobile tech videos because I searched around the forums a bit and found out that he is in fact reputable.
And I know how to get into download mode, I can do that no problem. My computer always pops up saying there is some problem with the device and I'm not sure how to fix it. I have the drivers installed correctly and it has worked in the past, but not recently. I would try to replicate it now but I don't have the phone in my possession, and at the moment it isn't really causing me an issue.
If you can't get Odin to recognize the phone once connected to the computer in download mode, then it is most likely a driver problem, or less likely a problem with the USB cable or ports. Once you get the phone back, if you still have the problem, that is where to look first.
I just wanted to point out that the broken power button would not prevent you from returning the phone to stock, although it can be a bit of a problem that you can't use recovery.
Yeah I was a bit worried that if I tried to go through Odin and something got messed up I wouldn't be able to get back into recovery to restore from a backup.
Thanks for all the help! I feel like a total noob and I appreciate your patience haha
In case you haven't already tried, in some versions of CWM (even non-touch) the search button (softkey) works like enter. Try all of the softkeys, one of them might work for you.
Yes, but if you Odin back to stock with a broken power button, that leaves you with stock 3e recovery. Even if you use adb reboot recovery to get into 3e recovery, you can't select anything without the power button.
I'm sure this has been asked before and I apologize for asking again if so. (I tried to search but couldn't find the files I need.)
I need to get my Vibrant that is on ICS back to 100% factory.
I know I have to repartition to go back but I can't find the factory Odin and PIT file I need.
Thank you all in advance.
This link might be able to help you.
http://forum.xda-developers.com/showthread.php?t=1319802&highlight=stock+odin
Awesome! Thanks.
New problem. (Small but important.)
I am not able to get into Odin download mode. I have all my drivers installed and when I connect the phone the battery icon pops up but if I do the three button method the screen goes black like it's supposed to be it just reboots and either goes back to the battery or powers on. (I am on ICS Passion V12 if that helps any.)
Any advice? I'm stuck without linking with Odin.
NoName9 said:
New problem. (Small but important.)
I am not able to get into Odin download mode. I have all my drivers installed and when I connect the phone the battery icon pops up but if I do the three button method the screen goes black like it's supposed to be it just reboots and either goes back to the battery or powers on. (I am on ICS Passion V12 if that helps any.)
Any advice? I'm stuck without linking with Odin.
Click to expand...
Click to collapse
Cut the phone off, pull the battery out and put it back in. Hold volume up and volume down keys at the same time(do not hold power button) and plug the usb cable in. If you have gingerbread boot loaders then it's really simple, cut the phone off and hold volume up key only then press the power button.
Sent from my SGH-T959 using XDA Premium App
iTz KeeFy said:
Cut the phone off, pull the battery out and put it back in. Hold volume up and volume down keys at the same time(do not hold power button) and plug the usb cable in. If you have gingerbread boot loaders then it's really simple, cut the phone off and hold volume up key only then press the power button.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
You are my new Hero!:good:
Thanks again.
NoName9 said:
You are my new Hero!:good:
Thanks again.
Click to expand...
Click to collapse
Lol no problem, glad I could help.
Sent from my SGH-T959 using XDA Premium App
It appears I can't catch a break!:crying:
I got the phone restored to 2.1 and it worked flawlessly.
I plugged it up to my pc to upgrade to 2.2 through Kies. I had charged to 100%, it upgraded successfully and said the device would reboot. It never did.
It appears Kies and 2.2 have hard bricked the phone. I don't get a charging indicator and can't get into recovery or download. The phone is completely unresponsive.
I am really starting to hate Samsung.
Yea - there should be a big warning everywhere not to use kies.
If you connect the phone to the pc does it show up in Odin? If so flash away.
Try the battery method again. Also instead of going to 2.1 you may want to try the Froyo KB5 2.2 Heimdall 1-click:
http://forum.xda-developers.com/showthread.php?t=1674519
download:
http://www.filereactor.com/zcl1dy7zlxbh/UVKB5_Stock_Heimdall-One-Click.jar.html
I haven't used Odin to get the 2.2 stock since the 1-Click
Moped_Ryder said:
Yea - there should be a big warning everywhere not to use kies.
If you connect the phone to the pc does it show up in Odin? If so flash away.
Try the battery method again. Also instead of going to 2.1 you may want to try the Froyo KB5 2.2 Heimdall 1-click:
http://forum.xda-developers.com/showthread.php?t=1674519
download:
http://www.filereactor.com/zcl1dy7zlxbh/UVKB5_Stock_Heimdall-One-Click.jar.html
I haven't used Odin to get the 2.2 stock since the 1-Click
Click to expand...
Click to collapse
Doesn't show in odin cause I can't get into download mode. :-( I'm afraid it's a hard brick as I get no response at all no matter what I try.
have you tried
1. unplugging the phone
2. pulling the battery
3. plugging it into the computer
4. place the battery back in
5. holding volume up + volume down + power
this is how i got to download mode when my phone wasn't responding
I know you said you tried everything i just want to make sure.
rmelendez3 said:
have you tried
1. unplugging the phone
2. pulling the battery
3. plugging it into the computer
4. place the battery back in
5. holding volume up + volume down + power
this is how i got to download mode when my phone wasn't responding
I know you said you tried everything i just want to make sure.
Click to expand...
Click to collapse
Just tried it again. No luck. I guess the phone is trash thanks to Samsung. :-/
Hey there. My phone was unresponsive as well, would not go into download mode, even tried the battery thing..
This link, One-Click Unbrick
Try that and see if it works for you, make SURE you have the latest Java.
My phone wasn't completely black, I had the Phone to PC error, but I could NOT get it to get into download or even see that something was plugged in. It was unresponsive to everything. I tried this program and BAM, I'm back into bootlooping. Shut my phone off, turned on in bootloader and reinstalled everything.
You MAY have to reinstall somethings so you might have to go back to square one, however at least you'll have a working phone.
Kies also bricked my first Galaxy.
Hopefully the One-Click unbrick will work for you! I wish you good luck!
NoName9 said:
Just tried it again. No luck. I guess the phone is trash thanks to Samsung. :-/
Click to expand...
Click to collapse
Samsung may replace the phone for you, call and tell them it bricked while using kies. For future reference do NOT use kies ever again, it is known to brick devices. If your phone is getting no power at all, then calling Samsung is your only choice and hope they replace it for you. I wish I would have known you were planning to use kies, definitely would have warned you not to. You can look into buying a usb jig for your phone, they are under $5 and maybe could help. You can also make them yourself for around 1 dollar.
Sent from my SGH-T959 using XDA Premium App
iTz KeeFy said:
Samsung may replace the phone for you, call and tell them it bricked while using kies. For future reference do NOT use kies ever again, it is known to brick devices. If your phone is getting no power at all, then calling Samsung is your only choice and hope they replace it for you. I wish I would have known you were planning to use kies, definitely would have warned you not to. You can look into buying a usb jig for your phone, they are under $5 and maybe could help. You can also make them yourself for around 1 dollar.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
The phone is out of warranty so I'm sure if they'd replace it or charge me to fix it.
The jig thread said it didn't work if you are completely unresponsive.
I'd used Kies on my Wife's Captivate and had no problems so I didn't know it would wonk up my sons Vibrant.
I'll try out the 1 click method and update.
Thanks again for the advice. (My son is using his old Nokia Nuron again so he at least has a phone in the interim.)
NoName9 said:
The phone is out of warranty so I'm sure if they'd replace it or charge me to fix it.
The jig thread said it didn't work if you are completely unresponsive.
I'd used Kies on my Wife's Captivate and had no problems so I didn't know it would wonk up my sons Vibrant.
I'll try out the 1 click method and update.
Thanks again for the advice. (My son is using his old Nokia Nuron again so he at least has a phone in the interim.)
Click to expand...
Click to collapse
Yea you could be right about the warranty issue but it was Samsung's program that screwed up your phone. If you haven't called them already, I would call and explain that you would still have a working phone if it wasn't for kies bricking your device. After all, Samsung recommends us to upgrade through kies even tho it has caused more damage than good from my experience. It's worth a try, you never know.
Sent from my SGH-T959 using XDA Premium App
NoName9 said:
The phone is out of warranty so I'm sure if they'd replace it or charge me to fix it.
The jig thread said it didn't work if you are completely unresponsive.
I'd used Kies on my Wife's Captivate and had no problems so I didn't know it would wonk up my sons Vibrant.
I'll try out the 1 click method and update.
Thanks again for the advice. (My son is using his old Nokia Nuron again so he at least has a phone in the interim.)
Click to expand...
Click to collapse
Just so you know, we recently had another member that hard bricked his phone using kies and was also out of warranty with T-Mobile. He called Samsung and explained THEIR program/software rendered his phone useless. He got a brand new vibrant out of the deal.
Sent from my SGH-T959 using XDA Premium App