[Q] Lock onto strongest cell signal - Motorola Droid X2

Not sure if this is possible but I was wondering if there is any way to make the phone lock onto the strongest signal available instead of the preferred network. The Verizon signal indoors is fairly poor and constantly switching to a us cellular tower.
Sent from my DROID X2 using Tapatalk

Related

Edge network?

On the vibrant theres an option to run on I think what is called edge network, I could be wrong, does verizon have such a network to run off of my buddies vibrant's batteries life is unreal...well aolt better than mine.???
Thx
Sent from my SCH-I500 using XDA App
Edge is the 2g network, when you drop a 3g signal your phone gets stuck on Verizon's version of it... I guess it would improve battery life but don't try to any browsing on it...
Sent from my SCH-I500 using XDA App
Edge is a type of GSM network, Verizon uses CDMA, so no, you can't use EDGE.
The equivalent to EDGE in Verizon would be the 1X data connection, as opposed to the 3G (EVDO) connection. I know we can disable mobile data with Froyo, but I don't think there's any way (without some kind of hack) to force the phone to always use a 1X data connection.
Sent from XDA Premium on my Super Clean Fascinate
It's somewhere in the hidden menus.
GSM phones, in general, get much better battery life. It has to do with the network. Coverage vs Battery life it's a toss up

(Q) signal strength change after ota update?

anyone seeing decreased 3g signal and better 4g after the ota update? Also is anyone getting a mobile ip registration error after turning 4g on? What causes that?
Sent from my MB855
TheShackSpecialist said:
anyone seeing decreased 3g signal and better 4g after the ota update? Also is anyone getting a mobile ip registration error after turning 4g on? What causes that?
Sent from my MB855
Click to expand...
Click to collapse
I noticed the change too. didn't want the 3g signal to decrease
Are you looking at the "bars" or are you looking at the actual signal strength which you will find in settings>about phone>phone status I have found that the number of "bars" has very little to do with the actual signal strength. At the point, I'm not even sure what the hell the "bars" mean.
I just installed it, but my signal in the office (always crap) isn't any worse or better as far as bars are concerned.
Did the OTA Possibly change your Mobile Network Settings? Change you from Automatic to Sprint only or something?
Haven't seen any noticeable difference
Sent from my MB855 using Tapatalk

Scratched up SIM

Could this effect the signal and data speeds?
Sent from my HTC Rezound using XDA premium.
Shouldn't, the sim only allows you to access the network. Your speed is determined by signal strength, and what particular server you are pulling from.

[Q] Would you like a 3G only setting for the G3?

Would you use a 3G only option if it was available on the G3?
I spoke to a Verizon Regional Exec today about the G3 and other Verizon phones that no longer have the option to run on CDMA only. The rep has an iPhone and regularly sets it to 3G only, especially when he let's his kids use the phone. He could not give me a reason why the G3 and other phones no longer has the ability to go to 3G only. He said he would look into this and see if it could be delivered in a future update.
Honestly I rather not have data at all then be stuck on 3G, just my opinion
I would like that option. There are areas where I play Ingress, for example, where the 3g Verizon signal is strong and uncluttered so its a much better option than LTE, which is either weak and eats battery trying over and over to reconnect, or is good but WAY oversold so there is no way to get good speeds on my unlimited data plan, much of the time.
One of the tricks we used to use on the VGNexus phones was select 3g only and save much battery life. 3g can sometimes be faster than 4g and it saves power by not running the rg radio.
Sent from my VS985 4G using Tapatalk
I can do this using com.lge.hiddenmenu. it has an intent that if launched will allow you to pick your desired frequency/bandmode. it includes lte only, cdma only, evdo only, cdma/evdo, and lte/cdmA/evdo as well as global.
i often have poor band 13 lte coverage and so it saves a lot of battery. sometimes it is nice to block 1x to improve speeds and force 3g if the signal is producing more speed then 1x. just my 2 cents,,,and if you get creative you can create a shell script to "su" then run the intent and then exit. place a shortcut on the homescreen and profit.
im reflashing my softbrick now or i would put the exact intent needed, maybe tomorrow if i remember but its network selection, network mode, something like that and way towards the bottom (last third) of the intents i viewed within hiddenmenu,apk
Please conform that the coma,option is available on works on the vs985
I've never seen 3g perform faster then 4g in my area
trent999 said:
I would like that option. There are areas where I play Ingress, for example, where the 3g Verizon signal is strong and uncluttered so its a much better option than LTE, which is either weak and eats battery trying over and over to reconnect, or is good but WAY oversold so there is no way to get good speeds on my unlimited data plan, much of the time.
One of the tricks we used to use on the VGNexus phones was select 3g only and save much battery life. 3g can sometimes be faster than 4g and it saves power by not running the rg radio.
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
The GNex was one of the last phones to be affected by that. Since Qualcomm took over Android, their integrated LTE radios use no more power than 3G radios.
timjp692 said:
I've never seen 3g perform faster then 4g in my area
Click to expand...
Click to collapse
Completely agree, even a very weak LTE always works better for me, even over a full 3G signal at times.
geoff5093 said:
Completely agree, even a very weak LTE always works better for me, even over a full 3G signal at times.
Click to expand...
Click to collapse
Basically. I think a full 3G signal is a little faster a very weak LTE signal, but at this point anywhere there's full 3G there's LTE.
Just download a massive amount of data and the carriers will throttle you down to 3G or lower, with occasional 4G use. As for some people saying that 3G is never faster, it depends on the carrier. Verizon throttles all 3G usage in an effort to convince 3G users to upgrade to 4G.

Sprint/T-Mobile LgV60

Is anyone else whos on sprint/TMobile having issues where the phone cant decide wether to connect to a sprint or TMobile tower? When im at my home i have a very weak TMobile 600mhz signal and a strong sprint band 41 signal due to the magic box. I also can pick up the band 25 signal the box uses and my phone refuses to just use the stronger faster sprint signal. It absolutely insists on using the TMobile signal. Is anyone having similar issues? Even on wifi its causing network interruptions so i have to reload a page several times to make it use the wifi.
jwarrior319 said:
Is anyone else whos on sprint/TMobile having issues where the phone cant decide wether to connect to a sprint or TMobile tower? When im at my home i have a very weak TMobile 600mhz signal and a strong sprint band 41 signal due to the magic box. I also can pick up the band 25 signal the box uses and my phone refuses to just use the stronger faster sprint signal. It absolutely insists on using the TMobile signal. Is anyone having similar issues? Even on wifi its causing network interruptions so i have to reload a page several times to make it use the wifi.
Click to expand...
Click to collapse
Mine jumps a lot but never connects to the magic box. I don't think it's enabled for B41? I have a Pixel 3XL that I activate (and deactivate my V60) when I'm at my camper which is where my MB lives.
henderjr said:
Mine jumps a lot but never connects to the magic box. I don't think it's enabled for B41? I have a Pixel 3XL that I activate (and deactivate my V60) when I'm at my camper which is where my MB lives.
Click to expand...
Click to collapse
Mine works with Band 41. Its a big one in the nearby city. It works with all sprint and TMobile bands. Its just prioritizing TMobile bands over sprint ones regardless of signal quality
Sent from my LM-V600 using XDA Labs
jwarrior319 said:
Is anyone else whos on sprint/TMobile having issues where the phone cant decide wether to connect to a sprint or TMobile tower? When im at my home i have a very weak TMobile 600mhz signal and a strong sprint band 41 signal due to the magic box. I also can pick up the band 25 signal the box uses and my phone refuses to just use the stronger faster sprint signal. It absolutely insists on using the TMobile signal. Is anyone having similar issues? Even on wifi its causing network interruptions so i have to reload a page several times to make it use the wifi.
Click to expand...
Click to collapse
I have no idea of this is related but.. I'm on T-Mobile, with T-Mobile home internet as well, and for the last several days my phone is having issues connecting and the home WiFi is doing the same thing. I'm in a rural area so my signal is weak, but it's been fluctuating WILDLY since the merger and sometimes it does seem like my phone is struggling trying to decide what to connect to. There's definitely something going on with the network at least in my area for the last 2 weeks for sure
Ryano89 said:
I have no idea of this is related but.. I'm on T-Mobile, with T-Mobile home internet as well, and for the last several days my phone is having issues connecting and the home WiFi is doing the same thing. I'm in a rural area so my signal is weak, but it's been fluctuating WILDLY since the merger and sometimes it does seem like my phone is struggling trying to decide what to connect to. There's definitely something going on with the network at least in my area for the last 2 weeks for sure
Click to expand...
Click to collapse
Sounds like this will be happening until the transition is done/5G is more widespread. These are TMobile models. When mine was first turned on at the store it had the T-Mobile splash screen. The ability to access sprint towers was added via software update post merger. I figure once the 600mhz band is fully rolled out the issue will go away as a result of the signal being strong enough.
Sent from my LM-V600 using XDA Labs

Categories

Resources