Hello,
Is it possibale to connect this external anteena devices to the samsung galaxy s2?
Code:
2000mW 54Mbps 802.11g/b 2.4GHz USB 2.0 Wireless Adapter with 20dBi SMA Directional Outdoor Antenna
(I can not post links ,google whats in the code box and you'll get the page of the product)
Code:
High Power 2000mW 802.11b/g 54Mbps USB 2.0 Wireless Network Adapter (2.4GHz/15dBi)
(I can not post links ,google whats in the code box and you'll get the page of the product)
Its say that those devices support linux..
So maybe the drivers are compatible ?
?
Thank you.
any update anyone???
Related
Hello, i have one old aliuminium ethernet cable, when i connect laptop and router using this cable I have to change network adapter speed to 10mbps full duplex. When it's on auto (or any other setting) i get "cable unpluged" message. But I want to connect router with android tv box (geniatech m1 atv1000), but magic doen't happen. Actualy it's not quite a router it's a cheap chineese wifi repeater , and it doesn't have allmost any settings, so i'm wondering is there a way to change androids network adapter speed and duplex?
I cannot change the cable, because it's betonated inside of the wall..
Hi People......i search a long time for an adapter, that can charge and use Usb on the Note 10.1 2014 (p600) at the same time.....no docking station do this, and all other adapters don't, cause the pins are channeled otherwise than on other devices......don't know why....but the adpater from Note Pro 10.1 with ethernet does.....but if i connect an ethernet Cable to it, nothing happens, cause (i think), Android has no Protocol to give a dhcp Adress to an ethernet device, and set the wifi Adapter off....
l found a tool for Nok 3, but I'm not sure, that will work on a P600. But on a mobile , it will not be needed as on a tablet ...
Anyone got an Idea to convert the ethernet drivers from Note Pro to the P600 kitKat ?
Sony for my ugly English
If you're rooted, this app should work: https://play.google.com/store/apps/details?id=xda.usbhost.test
I've never tried it with the Samsung branded ethernet adapter from the PRO series tablets, but I've used it in combination with an OTG cable and a generic USB to ethernet adapter, so it should work.
Thx a lot man......by the way, this is the same app, i wrote in the OP, i read about in the Note 3 Forum......i try and report
Result. ...is really strange.......the app accept the adapter, and get an ip adress...... ( it's a network Connection, coming from a router)....status gets to enabled, but i get no Internet Connection. ...strange.....i guess, Wifi have to be off. I also try to set the ip adress manually, also Router and Subnet Mask, but the same result, if i open a browser, no connection to the internet. Super SU Version is 2.02 .....any ideas?
There are no settings on a car head unit to configure a 3G dongle to access the Internet. According to some posts, people just plug in a dongle before starting the unit and it works. Does this mean that the configuration is stored on the dongle itself or SIM card?
When I connect the dongle to a 3G compatible router I need to enter the settings on the router configuration page. This means that the configuration is stored on the router. Similarly, if I connect the dongle to a PC, the PC needs configuration.
So, where is the configuration stored?
Hi:
I hope to determine if the Samsung Galaxy Grand Prime SM-G530R4 HARDWARE supports USB OTG before I attempt to create a modified kernel to enable it. My phone is rooted, the OTG test app(s) indicate the Android 5.1.1 OS software supports USB OTG. Does anyone know a reliable method for doing this? Any App?
Thanks, Tom
After some investigation I realize I do not have the computer resources to build an Android kernel. Hopefully another solution will become available.
I found this website that apparently can tell you if a phone has hardware support:
https://www.gsmarena.com
Find your phone then scroll down to the "COMMS" section:
WLAN Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot
Bluetooth 4.1, A2DP, LE, aptX
GPS Yes, with A-GPS, GLONASS
NFC Yes
Infrared port Yes
Radio No
USB microUSB 2.0, USB Host
If it has USB Host then supposively the phone hardware supports OTG. The Galaxy Grand Prime SM-G530R4 apparently does not. I`ll just have to get a phone that does support OTG.
Hi guys,
i hope some of you can help me.
I want to connect an OBDII cable to my phone. Its a ENET Cable, so I need an OTG/Ethernet Adapter. I have ordered the Rankie USB 3.0 Netzwerkadapter in black. I cant post links, but if you put this in the search in amazon its the first.
But the S7 Edge doesnt support ethernet, or? I cant find ethernet settings. So I flashed the kali nethunter kernel and opened the terminal emulator. With lsusb my ethernet adapter doesnt appear. Can someone help me? I think if the ethernet adapter appear, I can connect it to my car.
edit: Now I used an other third otg micro-usb to usb adapter and now my ethernet adapter appears, its a RTL8153 from Realtek. But how can I use it? I have no ethernet settings.
thanks in advance
Does nobody know an ethernet app or the shell command to get the ethernet working?
Ok, I dont think that here aren't users who know a solution. What I have done yet:
I got the adapter working, but only in terminal emulator. When I type lsusb it recognizes my adapter. Its a realtek RTL8153.
Then I connect my network cable and type: dhclient eth0
for test: ping -n 3 <address>
I get answers, e.g. from google. So the connection built up. But when I go to the browser or google play, it says no connection? I think, the phone and apps depends on 4G or wlan0. How can I force eth0? I need the decisive command.
For the static ip I would use: ifconfig eth0 <ip> netmask 255.255.255.0 gw <gw_ip>