Hello everyone, My first post on XDA and yes.... I'm N00B.
I've flashed Alien # 3 (and proper kernel) into my Thailand Atrix. The problem is EDGE icon always showing up even I have deleted all the APNs, though.
I've checked with the operator already that no data transferred from my device.
But this problem is disappear when I used latest Orange FR rom. I've tried many other roms out there in the development section. But all of it come along with this problem.
Please help me to find the cause of this problem and how to get rid of this annoyance.
Thank all of you in advance
SekRanger said:
Hello everyone, My first post on XDA and yes.... I'm N00B.
I've flashed Alien # 3 (and proper kernel) into my Thailand Atrix. The problem is EDGE icon always showing up even I have deleted all the APNs, though.
I've checked with the operator already that no data transferred from my device.
But this problem is disappear when I used latest Orange FR rom. I've tried many other roms out there in the development section. But all of it come along with this problem.
Please help me to find the cause of this problem and how to get rid of this annoyance.
Thank all of you in advance
Click to expand...
Click to collapse
same here, flashed a diff radio but won't help either
I can now get rid of this problem. The problem is most ROM here on XDA come with function to detect LTE which is unavailable in Thailand.
I just turn the LTE checking condition off by baksmali-smali SystemUI.apk file.
My level of n00b increase by 1.
@pennzoilgtr, I can suggest you to get rid of this same problem, too. But you need to do this everytime you install new ROM.
SekRanger said:
I can now get rid of this problem. The problem is most ROM here on XDA come with function to detect LTE which is unavailable in Thailand.
I just turn the LTE checking condition off by baksmali-smali SystemUI.apk file.
My level of n00b increase by 1.
@pennzoilgtr, I can suggest you to get rid of this same problem, too. But you need to do this everytime you install new ROM.
Click to expand...
Click to collapse
mai n00b khrup, khohn thai cha lat mak na! atrix yuu nai bpra thaeht thai khai thao rai na khrup? by the way I just switch back to stock rom, battery drain is bad on my phone no matter how many time i calibrate. i think i would just rather wait for official release here in singapore. khaw khoon mak na khrup!
Related
Hi new to forums but big big fan. I have seen the problem i face posted on many forums including xda but not with sufficient information. So here goes.
My partner bought a galaxy ace from virgin here in UK, it came with 2.3.3 pre installed after 3 days texts stop sending with 3g on but still be received. But when wifi is on or packet data or 3g turned off texts send. Now my partner had problems with germ previous phone abduction doesn't want to root in fear of needing tech help in future, now we can find a temp fix using automateit but not ideal for her. I will also note my sister got one on 3 and the problem hasn't occurred. Any other ace owners got this / fixed it without root and new Rom? Virgin CS is useless so not had any help from them. As i said i know this subject has risen before but just needed help as virgin will NOT reduce bill even though Im sure its their problem.
Any help / ideas?
Sent from my GT-I9100 using XDA App
I haad the same problem on one of my SGA', However it is on Orange and i had the exact same problem, this exact problem didnt start untill 2-3 days after purchase. I found NO fix for this..1 week later i flashed to 2.3.3 KP7 not the original pre-installed stock rom..Ever since flashing the problem has not reoccured.
I hope this may point you into the right direction,
Ste.
i got her to give in and let me root, and install official 2.3.4 on it using odin, but problem still there, so what install a earlier non network rom to fix? i thought the official 2.3.4 was non network specific?
Glad she gave into let you root her sga, thous im sure she wouldnt have notice it if you dont it without her knowing
Anyways back on topic,
I advise you to Flash (USING ODIN) to S5830XWKPW, CSC - S5830OXXKPC. This should rectify your issue
You can obtain it from samfirmware . com
Ste
ok nice, but im a little confused about this, with my hero all data had to be deleted before flashing, but with galaxy ace you dont?
weddy13 said:
ok nice, but im a little confused about this, with my hero all data had to be deleted before flashing, but with galaxy ace you dont?
Click to expand...
Click to collapse
Format /wipe cache from Recovery Mode then enter Download mode.
Ste
well registering over at SF is being troublesome
Can i ask why?
Also i have PM'd you the link to d/l use password samfirmware . com (NO SPACE)
Ste
tried captcha 15 times typed properly each time keeps saying captcha fail D:
thanks
weddy13 said:
tried captcha 15 times typed properly each time keeps saying captcha fail D:
thanks
Click to expand...
Click to collapse
captcha was also a problem for me, Use the audio captcha
Ste
didnt work either lol. im hoping this will fix it the complaints i get from her about texts xD
Are you refering to the audio captcha not working?
Ste
yeah. also extracted the .tar.md5 weirdly the files mentioned arent in the archive :/
Can you use any custom roms if your on orange uk ?
is the problem with just using 2.3.5?
(HDC a9100 is a chinese good quality replica of SGS2 with double 3G sim standby)
If there is a way to make HDC a9100 running any CyanogenMod version, write it here, or if there is already one for that phone
I have been browsing for 3hrs and not found anything yet -.-
It actually already runs CM7 but the items giving acces to the settings and the details have been removed in the most china phones, the only one I know having CM7 settings and all still showing is the Z710 ^^
I'll by trying to get Cm7 fully in original state once my phone arrives
*been using mtk6516 before
thanks for answer, it helped
Did you have any luck with this? I can't find any one who has confirmed a custom rom can be succesfully flashed on. I want all the chinese gone from mine...
I will keep posting over here: http://forum.cyanogenmod.com/topic/37450-samsung-galaxy-s2-hdc-a9100-chinese-mtk6573/
And you can root it (see my last comment there), then you can just remove those apps with root explorer.
And the rom it's running is CM7 but it has been quite customized and some apps have been removed, I will be looking into those things.
When I've got everything back to normal CM7 I will relase a update.zip which will remove the chinese apps and restore CM7 to it's original state ^^
Switching it to English made about 90% go English, but about 10% of settings menus still in Chinese. How you you deal with that? I havent used CM7 in about 5 months, so I cant remeber exactly where everything is, plus some has been rearanged.... I will check out your posts at CMforum too.
I will manually translate the remaning chinese parts of the software and create a patch ^^
Also I suggest to install the latest 2.3.4 of the forums link I've given above, installing 2.3.5 is experimental so use with caution.
Also I'm trying atm to get the original CM menu back as it was normally with more options and ofc the themepicker is something I'm working on for sure
Thank you for all of your answers! im really excited about ur idea seahorse!!
Hi there,
I'm just curious if it's also possible to flash to the newer CM9 ?
the phone just come to my attention lately, it looks pretty decent KIRF LOL
and pretty cheap
HDC A9100 stuck on Booting / Recovery Mode
Dear All,
My HDC A9100 was get blank screen after install custom ICS Theme.
I tried to enter Android system recovery <3e>, wipe data/factory reset, still same problem.
I tried apply update.zip (original stock ROM) from sdcard, but signature verification failed.
Please Help, how to solved my problem.
Best Regards,
Pria
I there any way to enter in bootloader mode HDC A9100D
Thank You,
Problem Solved..using SP Flash Tool
a 9110
Hello everyone, I state that are new to the forum, I would like to know if anyone has any update on this phone, I just got it and I must say it is pretty decent except for the memory and sometimes does not give me the phone application the names, only phone numbers.
thanks in advance to anyone who can help me and all those who have already developed improvements
: Laugh:
hard reset hdc a9100
hi guys i have a problem with my hdc a9100...the touch scrren don't work...is there a way with i can do a hard reset in this smartphone? thank you very much for yours help....
Hello all
I hope you are doing well
So I have a lovely white Galaxy S3, working perfectly like a charm
an Arabic keyboard and language is available "by default"
I switched a few days ago to a Blue S3 ..
The first issue was that there were no Arabic keyboard or language in the phone.
The other issue is that the internet is EXTREMELY PAINFULLY SLOW, like it's impossible for me to even open "Play" market, loading the default google page would take up 2 minutes and much worse.
So i tried looking for the same exact ROM that was installed on my white one.
found it, flashed the phone using ODIN with the new ROM.
Again there was no Arabic language, internet issue wasn't solve, a NEW issue came out which is "Messaging" app doesn't work anymore at all, whenever I launch the app, I get the "Messaging has stopped", I tried reseting to factory settings, didn't work, and it seems my friend is also suffering with the internet issue with his device
any help please ! I'm really starting to hate androids .. .
Go to CWM, wipe everything.
Then flash the ROM, Modem, CSC, Kernel, ... etc you used.
It should work, if not then either you got a defective unit (improbable) or the phone wasn't really fully wiped.
thank you for your reply
what is CWM ?
How do I know what were my default rom ?
jalmass said:
thank you for your reply
what is CWM ?
How do I know what were my default rom ?
Click to expand...
Click to collapse
CWM = clockwork mod recovery requires root and root invalidates your warranty .
Default rom whatever came with the phone or find one for your location and network from the Stock Rom thread
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_III/GT-I9300
Just carry out a standard factory reset no need for a CWM wipe and then flash stock rom .
Modem or CSC can be flashed separately .
jje
[i don't know what I'm doing]
Sent from my GT-I9300 using xda premium
Did you make a backup of your stock ROM?
If not try the stock firmware thread..
Sent from my GT-I9300 using xda premium
I didn't backup my stock rom and i don't know which is
my default one, tried downloading and flashing 3 roms up until now
all the same
no arabic
messaging still not working ..
I'm really a newbie in all of this .. .
some guy mentioned in another topic flashing then switching your sales code which worked for him
i did the same but it appears i have no sales code at all to switch between .. .
so i traced the messaging issue to a point where everyone had the same issue did this
1- check your CSC by dialing *#1234#
i did the same and I got "CSC: unknown"
the solution is to flash the CSC from the official topic
i flashed now 2 packages, still getting "unknown" message, how do I tell
which CSC is for my phone ?
U need to find a career or country specific firmware so Arabic is enabled.
Search "intratech" in general forum and find your country or region firmware and flash that.
And use "Samsung galaxy s3 toolkit" to flash your rom.it's in the development forum
Problem Solved :good:
Thank You for bearing with a noob like me guys
I really appreciate all your help
and just to describe what happened in case others had the same issue
I went to the official topic for the stock firmwares and since I didn't know what was my stock ROM, I kept downloading many ROMS based on where I bought my phone from "like getting all UK ROMS if you ordered your phone from there".
I kept flashing and dialing ( *#1234# ) after each flash to check my CSC, once I found a working ROM that got the CSC right, I switched the CSC region to "ARB", rebooted the phone, and it all worked
Arabic language became available + Messaging is back to normal + Internet issue seems to be solved "for now"
So thanks everyone .. . :highfive:
hi guys, I know help has been asked plenty of times for this and other phones. also I read dozaens of guides, but this instead of helping me, made me very confused :crying:
here is my problem: my girlfriend's sk17i has a terrible signal connection, so I would like to try different basebands on it (could that fix the problem or at least improve the situation?)
my problem is that I didn't understand clearly what I need to do on the phone to change basebands.. root? unloack bootloader? install cwm? install custom roms or stock ics will be ok?
ps. I am not new in root, see my signature I own a rooted defy+ and installed dozens of custom roms on it, so I would just like to know from you which preliminary steps I have to do and are strictly necessary to change basebands, once I know that I will try to do that by myself following the many guides I found..!
pps. I would like to do as less things as possible, just because it is not my phone and if I brick it a can get killed :laugh: if it was mine no problem I did everything possible on mine
thanks in advance for all the help you can provide
bye!
moly82 said:
hi guys, I know help has been asked plenty of times for this and other phones. also I read dozaens of guides, but this instead of helping me, made me very confused :crying:
here is my problem: my girlfriend's sk17i has a terrible signal connection, so I would like to try different basebands on it (could that fix the problem or at least improve the situation?)
my problem is that I didn't understand clearly what I need to do on the phone to change basebands.. root? unloack bootloader? install cwm? install custom roms or stock ics will be ok?
ps. I am not new in root, see my signature I own a rooted defy+ and installed dozens of custom roms on it, so I would just like to know from you which preliminary steps I have to do and are strictly necessary to change basebands, once I know that I will try to do that by myself following the many guides I found..!
pps. I would like to do as less things as possible, just because it is not my phone and if I brick it a can get killed :laugh: if it was mine no problem I did everything possible on mine
thanks in advance for all the help you can provide
bye!
Click to expand...
Click to collapse
To change baseband, you only need Flashtool, proper FTF file (every firmware includes different baseband) and phone with USB cable.
No root, no need to unlock bootloader, no CWM, any ROM will do.
Which baseband(BB) are you currently using? Also, which ROM?
Someguyfromhell said:
To change baseband, you only need Flashtool, proper FTF file (every firmware includes different baseband) and phone with USB cable.
No root, no need to unlock bootloader, no CWM, any ROM will do.
Which baseband(BB) are you currently using? Also, which ROM?
Click to expand...
Click to collapse
thanks for the reply!
good to hear.. seems I can try different BB's pretty easily so
she's on stock ICS 4.0.4..
BB: 8x55a-aaabqoazm-203028g-77
FW: 4.1.B.0.587
if it was mine, I would have already rooted, unlocked it and tried FXP cm10.. I can't stand all those sh*tty apps included in stock roms.. but as I wrote it is not mine and if I brick it that would be a big problem..
(even if actually she is using it as it was a old phone as data connection is almost un-usable.. 3g status is always almost 0, and 2g can not be used because of operator problems.. : ( ) so she can only use it with WI-FI in the office and then no data connection anymore..
that's bad, I bought her that phone and if I knew before data connection signal was so bad I would have never bought it
you think I can improve the situation trying different BB? tx again!
I doubt it will help. I do not think changing baseband will make it any better.
Try the same SIM card in another phone(s). Does the issue still occur in other phone(s)? If yes, the issue is with either the SIM or the operator.
Then try another SIM card in the Mini Pro. Does the issue still occur with another SIM card in Mini Pro? If yes, then the issue lies in your phone.
I have already made tests, troubleshooting etc (I work in a service department :laugh: ) and I am sure the problem is on the phone that's why I would like to try a different BB as last hope.. if that won't work then I will trow it away and buy something else.. :crying:
bull****
moly82 said:
hi guys, I know help has been asked plenty of times for this and other phones. also I read dozaens of guides, but this instead of helping me, made me very confused :crying:
here is my problem: my girlfriend's sk17i has a terrible signal connection, so I would like to try different basebands on it (could that fix the problem or at least improve the situation?)
my problem is that I didn't understand clearly what I need to do on the phone to change basebands.. root? unloack bootloader? install cwm? install custom roms or stock ics will be ok?
ps. I am not new in root, see my signature I own a rooted defy+ and installed dozens of custom roms on it, so I would just like to know from you which preliminary steps I have to do and are strictly necessary to change basebands, once I know that I will try to do that by myself following the many guides I found..!
pps. I would like to do as less things as possible, just because it is not my phone and if I brick it a can get killed :laugh: if it was mine no problem I did everything possible on mine
thanks in advance for all the help you can provide
bye!
Click to expand...
Click to collapse
changin BB won't change anything
prantoroy said:
changin BB won't change anything
Click to expand...
Click to collapse
wow.. that's not so good to hear.. so I've just wasted the money I spent for that sh*itty phone! ((( (everything else is good on it actually, but with that bad reception can't be used, simply..)
Hi everybody! I've got an S3 NoBrand rooted, mounting PAC rom with kernel stock (tryed also googy's kernel) and stock modem.
After installing the first coocked rom 1 month ago (the CM10.2) I found a "secondary" problem to which I have never given much importance but now I would like to solve
From the first boot with the new rom the phone marks me as there is no signal. In fact, although there is network and you connect to the Internet without any problems, the strenght signal icon remains "empty" (see picture to understand better).
[Can't post image because of limited powers of new users]
I have found out that did not depend on Cyano as it lasted one day before I've changed it with the PAC but this issue has remained unresolved ..
I have already tried full wipes data,cache, devilk and cleaning then changing the kernel!
Sorry if I used a bad English but I've already asked on the Italian forum but unfortunately without success!
I'm counting on you!!
THANKS! :good:
(sorry made a wrong post and can't delete it =S )
UP!!! HELP PLS :crying::crying::crying:
Help please!!
Found same problem with Illusion Rom!!! CMON!!
Wipe and flash stock rom and test .
If ok answer is the roms you are using .
JJEgan said:
Wipe and flash stock rom and test .
If ok answer is the roms you are using .
Click to expand...
Click to collapse
Could u help me finding where to download the stock rom?
I've found out that it depends on the model number or something like that but I can't get how to discover it!
up :/
Try this:
http://forum.xda-developers.com/showpost.php?p=32664154&postcount=4
The first website (samfirmware.com) should give you the stock ROM you need
I've installed the stock rom and the Signal icon is working again!
Anyone knows why is giving me such a problem with the other ROMs?
Can't I do anything about it?