Is there a rubber bumper case - Eee Pad Transformer Accessories

Looking for a case for my TF, want only to cover back and sides of the tablet.
And I want it to be non slippery, there are lots of these for cellphones but
where can I find it for the TF?

dnilsson said:
Looking for a case for my TF, want only to cover back and sides of the tablet.
And I want it to be non slippery, there are lots of these for cellphones but
where can I find it for the TF?
Click to expand...
Click to collapse
I haven't seen one yet. Someone else may have, but in my experience, it's hard to make silicone that big without either tearing or stretching pretty quickly. What about a bumper like the iPhone 4, where it only wraps around the sides, but the rear section of it is thick enough that the back of the tablet doesn't touch the table when it's set down? I think it would relieve some of the stress from the silicone, and I could use a stretchier mix to keep it tight. I'd kind of like that, and if enough people are interested I can give it a shot, I don't make cases for a living or anything, but I have some friends with a 3D prototyper and a whole bunch of industrial AB silicone. (Yes, I have weird friends.)

That sound quite interesting, I could be interested in one of those.
When using it now without a case I think it's kinda slippery.
I think one of those would give a better grip of the tablet.
What about dropping it, do you think the silicone will absorb the drop?

dnilsson said:
That sound quite interesting, I could be interested in one of those.
When using it now without a case I think it's kinda slippery.
I think one of those would give a better grip of the tablet.
What about dropping it, do you think the silicone will absorb the drop?
Click to expand...
Click to collapse
As much as it could, obviously. The problem is that it won't be much thicker than a silicone case for a phone, but the device is much heavier. Hence, more inertia. I'll grab some chunks of different mixes and test them by dropping a Transformer analog on them. Just FYI, I'm actually using a really large(and wide) rubber band right now to protect my TF's corners/edges. My belt buckle and watch tend to contact the sides of the TF every once in a while, so it keeps that pretty "gold steel" bezel from scratching. I'll see if I can figure out where I got it from in the meantime.

msticninja said:
As much as it could, obviously. The problem is that it won't be much thicker than a silicone case for a phone, but the device is much heavier. Hence, more inertia. I'll grab some chunks of different mixes and test them by dropping a Transformer analog on them. Just FYI, I'm actually using a really large(and wide) rubber band right now to protect my TF's corners/edges. My belt buckle and watch tend to contact the sides of the TF every once in a while, so it keeps that pretty "gold steel" bezel from scratching. I'll see if I can figure out where I got it from in the meantime.
Click to expand...
Click to collapse
Wow, id like to see a rubber band that big lol. Maybe then i wudnt have a gash in my transformers bezel from bumping it into a wall

Camaros_Kill said:
Wow, id like to see a rubber band that big lol. Maybe then i wudnt have a gash in my transformers bezel from bumping it into a wall
Click to expand...
Click to collapse
It actually drew blood when I snapped someone with it. That's how big it is.

msticninja said:
As much as it could, obviously. The problem is that it won't be much thicker than a silicone case for a phone, but the device is much heavier. Hence, more inertia. I'll grab some chunks of different mixes and test them by dropping a Transformer analog on them. Just FYI, I'm actually using a really large(and wide) rubber band right now to protect my TF's corners/edges. My belt buckle and watch tend to contact the sides of the TF every once in a while, so it keeps that pretty "gold steel" bezel from scratching. I'll see if I can figure out where I got it from in the meantime.
Click to expand...
Click to collapse
I'm really looking forward to see what you can make
Please update here with pictures and info.

msticninja said:
It actually drew blood when I snapped someone with it. That's how big it is.
Click to expand...
Click to collapse
LOL Post pics of that too!

This might be what your looking for.
http://cgi.ebay.com/Sikai-Silicone-...079227?pt=PDA_Accessories&hash=item2eb723e7bb

tonyz3 said:
This might be what your looking for.
http://cgi.ebay.com/Sikai-Silicone-...079227?pt=PDA_Accessories&hash=item2eb723e7bb
Click to expand...
Click to collapse
Great find. A quick look on ebay shows Xoom silicone cases for as low as $5 shipped. Hopefully more suppliers we be offering these soon and prices for the a Transformer silicone sleeve will drop similarly.

I'm looking for a case too and found this (it's for netbooks?) but would this be ok for the transformer too? I want to use it for tablet + dock. Are there better suggestions?
http://item.mobileweb.ebay.com/viewitem?itemId=200641079227
Sent from my GT-I9000 using XDA Premium App

tonyz3 said:
This might be what your looking for.
http://cgi.ebay.com/Sikai-Silicone-...079227?pt=PDA_Accessories&hash=item2eb723e7bb
Click to expand...
Click to collapse
I like that but silicon case gets dirty quick. I'm waiting for similar tpu case to show up.

tonyz3 said:
This might be what your looking for.
http://cgi.ebay.com/Sikai-Silicone-...079227?pt=PDA_Accessories&hash=item2eb723e7bb
Click to expand...
Click to collapse
Thanks! I think I'll order it right away, just what I was looking for.
But I'm still interested in what @msticninja was talking about,
if you have made some progress in developing a case please write

dnilsson said:
Thanks! I think I'll order it right away, just what I was looking for.
But I'm still interested in what @msticninja was talking about,
if you have made some progress in developing a case please write
Click to expand...
Click to collapse
Durability is an issue with most of my samples. Hopefully someone will post regarding the Sikai's durability. I've got some different samples coming, will update when I've tested them.

msticninja said:
Durability is an issue with most of my samples. Hopefully someone will post regarding the Sikai's durability. I've got some different samples coming, will update when I've tested them.
Click to expand...
Click to collapse
Have placed an order on Sikais Silicone Case now, will take about 15 days for delivery.

Hopefully Otterbox will come out with something - they are a local company here in Fort Collins CO! I'll try and find out from one of the local reps

tonyz3 said:
This might be what your looking for.
http://cgi.ebay.com/Sikai-Silicone-...079227?pt=PDA_Accessories&hash=item2eb723e7bb
Click to expand...
Click to collapse
If that's anything like the silicone case I got for my PSP, you don't want it. Far too thin to provide any real protection, doesn't fit snugly, looks misshapen and ugly because it's near impossible to get it perfectly straight, and the thing is a dust and lint / hair magnet like you wouldn't believe.
I literally haven't used it at all since the first time I tried it.

msticninja said:
Durability is an issue with most of my samples. Hopefully someone will post regarding the Sikai's durability. I've got some different samples coming, will update when I've tested them.
Click to expand...
Click to collapse
Got my Sikai silicone case today.
It looks really nice BUT, it doesn't provide a snug fit.
I'm scared that it will slip out of the cover. Each four sides are very loose,
only the corners offers a snug fit.
If @msticninja have any questions lets here them, I want to help you
create that cover you talked about.

dnilsson said:
Got my Sikai silicone case today.
It looks really nice BUT, it doesn't provide a snug fit.
I'm scared that it will slip out of the cover. Each four sides are very loose,
only the corners offers a snug fit.
If @msticninja have any questions lets here them, I want to help you
create that cover you talked about.
Click to expand...
Click to collapse
post some pics

Can you dock with the sikai silicone case? I would also like to see pictures too. Thanks!

Related

[Q] help looking for a case

I need some help looking for a case. I would like something folio style, but all of the pictures of the M1, Px cases look like they stand very upright. I am looking for a case that will lean back to allow it to sit and use as a keyboard stand. Anyone have any ideas for me?
Thanks!
-J
CLIP
I got a CLIP from it2steve's web store and it works as exactly as you are wanting it to. It comes with 3 grooves on one side so you can have the gTab in 3 viewing angles but if you let it all the way down as shown in the attached photo it's perfect for typing.
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
sjmoreno said:
I got a CLIP from it2steve's web store and it works as exactly as you are wanting it to. It comes with 3 grooves on one side so you can have the gTab in 3 viewing angles but if you let it all the way down as shown in the attached photo it's perfect for typing.
Click to expand...
Click to collapse
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
smapdi said:
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
Click to expand...
Click to collapse
I'm pretty sure that's the only place to get them. You just have to keep a close eye on the site. I managed to snag one last week, but they were only in stock for a couple of hours.
smapdi said:
As a new GTablet owner I was looking for a good case as well. The Clip looks sweet but it seems to be sold out from it2steve's store.
Anyone know where I can score this sweet looking case?
Click to expand...
Click to collapse
I think I read on his last email that he's got 120 CLIP cases coming in the next shipment.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
Yeah, I heard that too about the magnets on the M1.
I am very happy with my CLIP case. In my opinion it is the only Apple quality accessory we have for the gTab at the moment. It's well worth the extra cash and I can't recommend it any better.
Thanks SJ! Exactly what I'm looking for. Appreciate the pic.
-J
StingRay_ said:
sj
...another forum thread said that magnets in that case cause the screen to freak out...
Click to expand...
Click to collapse
I tried moving a small (1/4" diameter x 1/8" thick disk) rare earth magnet near the screen of my GTab, and didn't see any effects. Has anyone else tried any experiments? How large is the magnet in the case?
I saw a clip style case at staples that's made for the xoom- any chance it would fit our g-tabs?
ZebTheCalvinist said:
I'm pretty sure that's the only place to get them. You just have to keep a close eye on the site. I managed to snag one last week, but they were only in stock for a couple of hours.
Click to expand...
Click to collapse
available now both black and white on AliExpress for $58 shipped, if you would rather spend the time waiting for it in transit from Asia rather than waiting for it to get restocked @ Steve.
Check the thread here.
insight76 said:
I saw a clip style case at staples that's made for the xoom- any chance it would fit our g-tabs?
Click to expand...
Click to collapse
No. I looked into this a few weeks ago (don't remember where I posted that) and the Xoom and gTabs are different sizes. If I remember correctly the gTab was bigger/longer than the Xoom.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
As an M1 owner who's used it for a couple of weeks now, I can tell you that the magnet issue, like most things on the Internet, is blown way out of proportion. I use the tablet daily at work, have used it shopping for replacement flooring/furniture for our flooded gameroom, and sitting on the reclining sofa playing Angry Birds. I've never had a problem with the magnets reducing screen responsiveness or "freaking out". My only complaint is that over time, the GTab tends to settle further down in the case, half-hiding the camera and all but covering the ambient light sensor. If you don't plan on propping it up on a desk as often as I do, it makes a wonderful case.
M1 Case and G Tab Screen
I got an M1 case on Monday so I've had it for 3 days now. The fit, feel and look of the case are all excellent so far on mine, however, the it does mess with the screen. The longer it stays in the case the worse it gets. I have done tests in and out of the case, putting to sleep or not, rebooting or not and now have no doubt it is the case but I am not sure if its actually the magnets or not. It could just be the case itself touching the edges of the screen all day. In any case, (some pun intended) the longer it stays in the case, the harder you have to press the outside portions of the screen to get it to react. Mine eventually gets to the point where you cannot press hard enough to get the keys on the keyboard to function. When this happens I put it to sleep, pull it out of the case, wake it up and it works like new again. I will probably be investing in a black clip myself in the near future. This could just be a problem with my particular Gtab and it may not effect others at all but that is my short bit of experience with the M1 Case.
There's a few black clip cases in stock at it2steve's web store now.
WI Global Technology Case for GTablet - $16, delv'd
miatawnt2b said:
I need some help looking for a case. I would like something folio style, but all of the pictures of the M1, Px cases look like they stand very upright. I am looking for a case that will lean back to allow it to sit and use as a keyboard stand. Anyone have any ideas for me?
Click to expand...
Click to collapse
For anyone who doesn't want to spend $50-$60 on a case for a $300 item, WI Global Technology has cheap alternatives. One with clips, one with elastic.
I got the one with clips. For $16 - It's OK.
All ports are accessible.
It's vinyl - NOT leather.
The covers extend about 1/16th" beyond the GTab - just enough protection (for me, anyay)
As you can see. the kickstand angle is about 75 degrees - it would probably be better if it were more like 60.
For $16 delivered, you get what you pay for (maybe a bit more... ymmv).
Search eBay for "fashion leather case gtablet"
- michael
and before anyone asks...
yes, those are LED indicators by the back/menu/home/search buttons.
It's a custom mod which can be seen here
slsmag said:
For anyone who doesn't want to spend $50-$60 on a case for a $300 item, WI Global Technology has cheap alternatives. One with clips, one with elastic.
I got the one with clips. For $16 - It's OK.
All ports are accessible.
It's vinyl - NOT leather.
The covers extend about 1/16th" beyond the GTab - just enough protection (for me, anyay)
As you can see. the kickstand angle is about 75 degrees - it would probably be better if it were more like 60.
For $16 delivered, you get what you pay for (maybe a bit more... ymmv).
Search eBay for "fashion leather case gtablet"
- michael
Click to expand...
Click to collapse
It's WIT Global. I just ordered one for me. $15.99 shipped. It's coming from Hong Kong, so I wonder how long it will take.
merdely said:
It's coming from Hong Kong, so I wonder how long it will take.
Click to expand...
Click to collapse
Mine arrived in just about 2 weeks.
StingRay_ said:
sj
you pretty happy with your Clip? I was leaning towards the M1, but another forum thread said that magnets in that case cause the screen to freak out...back on the Clip if those who have one are happy....
thanks for info...
Click to expand...
Click to collapse
Hmmm been using the M1 for a few weeks now. Never noticed this magnet issue. I know magnets can mess with hard drives but never heard of it messing with an LCD. Doesn't the ipad 2 smart cover have like 70 magnets?
EDIT: Looked it up, 31 magnets.

Best TPU Cases so far?

Send some links and thanks button will apply...
http://www.amazon.com/TPU-Cases-Fle...WDO0/ref=sr_1_1?ie=UTF8&qid=1308883763&sr=8-1
Ordered the one linked above. It arrives tomorrow. Will let you know.
Congo123 said:
http://www.amazon.com/TPU-Cases-Fle...WDO0/ref=sr_1_1?ie=UTF8&qid=1308883763&sr=8-1
Ordered the one linked above. It arrives tomorrow. Will let you know.
Click to expand...
Click to collapse
Thanks for the order! I'm personally using our Smoke TPU cases (no pattern) and love it. I'm actually taking the Otterbox Commuter back. I love that you can see the HTC logo through it.
Here is our link since you asked: http://tpu-cases.com
I ordered one that comes in tomorrow. Does this type of case ever really stretch or lose its shape?
retnuh730 said:
I ordered one that comes in tomorrow. Does this type of case ever really stretch or lose its shape?
Click to expand...
Click to collapse
Nope TPU cases do not lose their shape
I'm not quite sure what the benefits of TPU are. I've done Googling, and I've read that they're more durable and hold their original form better. Is that the extent of it? Apologies for my ignorance, but I'm curious.
Also, how are they aesthetically?
I am also using a smoke grey one from tpu-cases.com. Looks great and works great but there are a few quirks.
First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also.
2nd The top camera hole (the one closer to the top of the phone doesn't line up perfect like the other camera hole. It doesn't block the camera by any means but it just doesn't line up right.
Great Case though...Far better then I thought it would be for me having the case about a month before the phone came out
Just ordered this one...it has a checker pattern but is nice
http://cgi.ebay.com/ws/eBayISAPI.dl...150489&ssPageName=STRK:MEWAX:IT#ht_3148wt_956
If u want a smoke one no pattern here is a link
http://cgi.ebay.com/ws/eBayISAPI.dl...176002&ssPageName=STRK:MEWAX:IT#ht_3148wt_956
Just ordered the smoke case off of Amazon. Should be here tomorrow (thank you Amazon Prime w/ $4 overnight shipping), so I'll no longer be super afraid to drop it.
http://tpu-cases.com/index.php?main_page=product_info&cPath=7&products_id=101
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Congo123 said:
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Click to expand...
Click to collapse
Me, too. And I love the rubberized feel of it.
Looks like the Amazon clear smoke ones for me. Will be ordering tonight.
I just put in an order from Tpu cases. Figure I`ll use it until I get case with kickstand
OneStepAhead said:
Thanks for the order! I'm personally using our Smoke TPU cases (no pattern) and love it. I'm actually taking the Otterbox Commuter back. I love that you can see the HTC logo through it.
Here is our link since you asked: http://tpu-cases.com
Click to expand...
Click to collapse
Just ordered one black and other smoke. Thanks
I ordered my smoke one from http://tpu-cases.com a couple of weeks ago. The only issue I have with it is that the power button is a bit difficult to get at. Not a big deal and I would think that it wouldn't effect most people the same, I have large hands.
http://www.amazon.com/TPU-Cases-Flex...8883763&sr=8-1
Received the case linked above and couldn't be happier with it. Previously I used the HTC silicone rubber case for my EVO 4G followed by an Otterbox Commuter when it was available. Over time I was disappointed in both cases as the silicone rubber of both products stretched and I was always trying to "form" it around the phone. This TPU case slides easily out of my pocket and does not seem to grab lint. It also seems as if it is going to hold up very well. The cutout on the top camera is a little off, but does not impact the ability of the phone to take pictures, focus, etc. I too had planned on kicking the HTC branded kickstand case......but I think I would be happiest with a TPU case with a modded battery cover that had a kickstand with a TPU case over it with cutout added.
Congo123 said:
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Click to expand...
Click to collapse
I have the TPU case, and that issue is a slight annoyance for me. These battery covers feel so flimsy as it is.
Congo123 said:
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Click to expand...
Click to collapse
I think its a positive too, but it is hard to get the case off without pulling off the battery door too. It's just a weird battery door design I think. It's not a huge issue, but I did notice it as well. As for the top camera hole being 1mm off or so, we are fixing the mold and will have smoke, smoke argyle, and black with the correct positioning as early as next Friday. If you already ordered and you want one of the new ones when they come in just shoot me a PM and I'll get you on free of charge. As for the white, red, and green those ones are staying as is for the time being. It is just a cosmetic thing though, it doesn't block the camera at all. Sorry guys!
Any of you guys that ordered from me, if you have some free time I would be eternally grateful if you left product reviews for them on Amazon. Reviews really help sales tremendously.
OneStepAhead said:
I think its a positive too, but it is hard to get the case off without pulling off the battery door too. It's just a weird battery door design I think. It's not a huge issue, but I did notice it as well. As for the top camera hole being 1mm off or so, we are fixing the mold and will have smoke, smoke argyle, and black with the correct positioning as early as next Friday. If you already ordered and you want one of the new ones when they come in just shoot me a PM and I'll get you on free of charge. As for the white, red, and green those ones are staying as is for the time being. It is just a cosmetic thing though, it doesn't block the camera at all. Sorry guys!
Any of you guys that ordered from me, if you have some free time I would be eternally grateful if you left product reviews for them on Amazon. Reviews really help sales tremendously.
Click to expand...
Click to collapse
Quick question about your cases. Any reason your cases cover the camera button, like for support reasons? It's harder to push the camera button down than I'd like, causing shaky pictures, but I cut a hole out for it. Just a thought for future updates.
I like the camera button covered....that button would eventually get sheared off by me if it wasn't covered. Ohh and I left amazon feedback ftw.

Otterbox Commuter doesn't fit?

So I just got the otterbox communer (commuter?) and I noticed it doesn't fit on the top.. there is a slight gap between the top of the phone where the speaker is and the actual case.. it doesn't really make contact.
Is this the norm or should I exchange mine?
Mine fits fine. I really like it. I had for my EVO 4G as well. You just have to adjust it and make sure its on right.
Sent from my PG86100 using Tapatalk
billyapd21 said:
Mine fits fine. I really like it. I had for my EVO 4G as well. You just have to adjust it and make sure its on right.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I had it for the old Evo as well.
I tried adjusting it, it is simply just made a slight bit bigger than the phone itself. I think I'll take it back tomorrow and see if a different one fits better.
Only problem with that is, I used the screen protector.... will they still take a return?
mine fits a started off with the defender n it was way to bulky 4 me took it back and got a commuter. couldn't be happier... well till theres root > anyway have u tried pushing the top in some more?
I agree. The silicone is definitely a bit big. I can see the headphone hole when I look under the case with it on
Mine fits the same way. Theres a small gap at the top. I think Im going to return it because of this. Im too OCD to see that gap all the time.
Just got a 3vo today with a commuter case...fits fine..no problems..
camdz said:
Mine fits the same way. Theres a small gap at the top. I think Im going to return it because of this. Im too OCD to see that gap all the time.
Click to expand...
Click to collapse
I love that i can come here knowing there are people like me, because that would surely drive me insane too lol. The sad part is i would bother myself by looking at it constantly.
jxr94 said:
I love that i can come here knowing there are people like me, because that would surely drive me insane too lol. The sad part is i would bother myself by looking at it constantly.
Click to expand...
Click to collapse
It's eating me up... I had this phone naked since the 23rd? It's made me crazy thinking I was gonna scratch it... now I get the usually exceptionally nice otterbox... and it doesn't fit =\
How about the screen protector that comes with it? is it worth it to out it on?
rdcrds said:
How about the screen protector that comes with it? is it worth it to out it on?
Click to expand...
Click to collapse
The screen protector that comes with it is nice. Don't buy the "sprint" ones because they don't cover the entire screen....
I installed the screen protector and it fits perfect. No issues at all. Maybe return the case or contact otterbox. They have great customer service.
Sent from my PG86100 using Tapatalk
My question is does anyone know if the commuter will fit in the official car dock. I doubt it but just curious.w
Sent from my PG86100 using Tapatalk
billyapd21 said:
My question is does anyone know if the commuter will fit in the official car dock. I doubt it but just curious.w
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
It doesn't fit perfectly in the iGrip car dock that Sprint's selling, if you want it to charge you'll have to snip off the rubber USB cover and modify the dock just a bit. Nice dock, though.
Just exchanged the commuter case for another one.... same problem. That little gap up top is going to be a catch-all for all sorts of junk =\
Anyone know of another case like this? I like the rubber case with the plastic clipping overtop of it... that way it doesn't scratch the phone.
Rippley05 said:
Anyone know of another case like this? I like the rubber case with the plastic clipping overtop of it... that way it doesn't scratch the phone.
Click to expand...
Click to collapse
Try the Case-Mate Tough Case. Similar design to the Commuter, fits flawlessly. I reviewed it in detail here.
po96od said:
Try the Case-Mate Tough Case. Similar design to the Commuter, fits flawlessly. I reviewed it in detail here.
Click to expand...
Click to collapse
Looks good. I need to find some pretty close up pix of how it fits on the phone tho.. since that's the only issue I have with the otterbox.
I'm experiencing the same thing, its pissing me off, IDK why they didn't make it so you had to stretch the rubber over the phone, its too big for the phone...
would have been okay if the black plastic piece went over the top and crimped it in place, but as we all know, there isn't any there
Since you guys mentioned it, now I see it too.
A lot of dust/lint collected in just one day it seems as I found out after taking the cover off to see if I could readjust the silicone to make it fit better. No go!
I think I am gonna return this!
Does any one know if Case-mate Tough Case is as pretty as this Otter Commuter baby?
Alanmw86 said:
I'm experiencing the same thing, its pissing me off, IDK why they didn't make it so you had to stretch the rubber over the phone, its too big for the phone...
would have been okay if the black plastic piece went over the top and crimped it in place, but as we all know, there isn't any there
Click to expand...
Click to collapse
Rippley05 said:
Looks good. I need to find some pretty close up pix of how it fits on the phone tho.. since that's the only issue I have with the otterbox.
Click to expand...
Click to collapse
check the couple posts under his link...i posted up pics and an additional review
http://forum.xda-developers.com/showpost.php?p=15097277&postcount=11
i put them both on at the store
i LOVED the 4g commuter case...its gross on the evo3d
i am a case perfectionist.....ive gone through like 10 on the 4g ... the case-mate takes the cake for the 3d... no doubt about it

DonStar "Duralumin" bumper case

Other than the Sweet Armor aluminum bumper, I didn't see this particular one posted here yet.
Has anyone tried these? They come in several colors and looks pretty good.
http://www.ebay.com/itm/Duralumin-S...ccessories&hash=item3a736f7ec7#ht_2910wt_1163
Tikerz said:
Other than the Sweet Armor aluminum bumper, I didn't see this particular one posted here yet.
Has anyone tried these? They come in several colors and looks pretty good.
http://www.ebay.com/itm/Duralumin-S...ccessories&hash=item3a736f7ec7#ht_2910wt_1163
Click to expand...
Click to collapse
Haven't seen that one, and the corners look more rounded than the Sweet Armor is. I can't help but wonder though about the screws. They go through the aluminum such that if it is dropped and it hits on the corner, the tiny screw will take the hit in shear. Unlike the Sweet Armor where the aluminum shape itself is taking the hit. So, I wonder what they did to keep the tiny screws from shearing off in a drop.
over2land said:
Haven't seen that one, and the corners look more rounded than the Sweet Armor is. I can't help but wonder though about the screws. They go through the aluminum such that if it is dropped and it hits on the corner, the tiny screw will take the hit in shear. Unlike the Sweet Armor where the aluminum shape itself is taking the hit. So, I wonder what they did to keep the tiny screws from shearing off in a drop.
Click to expand...
Click to collapse
I'm not sure. When I saw it used screws I was immediately reminded of the Vapor Element cases for the iPhone. They use screws too.
Tikerz said:
I'm not sure. When I saw it used screws I was immediately reminded of the Vapor cases for the iPhone. They use screws too.
Click to expand...
Click to collapse
Having never had an iPhone I have no idea what that is. The Sweet Armor also uses screws.
I looked at more pictures. It would appear that this case uses two screws to hold the parts together. One big C and one small C, so to speak. A left and a right half rather than a front and back half like the Sweet Armor.
Also, from surfing Ebay it seems like it might hold the screen further off the surface you might lay it on, which in my opinion is one of the shortcomings of the Sweet Armor.
It definitely looks nice. It's a little pricey at $50 though. Just debating on whether to take a chance or not.
Tikerz said:
It definitely looks nice. It's a little pricey at $50 though. Just debating on whether to take a chance or not.
Click to expand...
Click to collapse
Eh, I blew way more than that on 2 Sweet Armor bumpers for me and my girl plus express shipping. I don't regret the expenditure.
Never heard of duralumin. Is that a fancy name for plastic meant to sound like aluminum?
kimtyson said:
Never heard of duralumin. Is that a fancy name for plastic meant to sound like aluminum?
Click to expand...
Click to collapse
Who knows, but I do know that this case isn't made out of plastic.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
I will stay away anything related to aluminum, it causes me trouble with phone and GPS signals before.
Never heard of duralumin either, got me interested and I did a search
Duralumin
From Wikipedia, the free encyclopedia
Duralumin (also called duraluminum, duraluminium or dural) is the trade name of one of the earliest types of age-hardenable aluminium alloys. The main alloying constituents are copper, manganese, and magnesium. A commonly used modern equivalent of this alloy type is AA2024, which contains 4.4% copper, 1.5% magnesium, 0.6% manganese and 93.5% aluminium by weight. Typical yield strength is 450 MPa (65 ksi), with variations depending on the composition and temper.[1]
Tikerz said:
It definitely looks nice. It's a little pricey at $50 though. Just debating on whether to take a chance or not.
Click to expand...
Click to collapse
I'd be willing to bet that the price will come down to under $20, just like the Element vapor knockoffs were for the iPhone. I bought the knockoff for my iPhone and it was as good as the original I bought from Element.
$40 is way too much.
dont these aluminum cases affect your phone reception?
the sweet armor looks really nice, but 70 bucks is outrageous
Tikerz said:
Who knows, but I do know that this case isn't made out of plastic.
Click to expand...
Click to collapse
Don't know how you can be so sure when you state you don't know.
HDCowboy said:
Never heard of duralumin either, got me interested and I did a search
Duralumin
From Wikipedia, the free encyclopedia
Duralumin (also called duraluminum, duraluminium or dural) is the trade name of one of the earliest types of age-hardenable aluminium alloys. The main alloying constituents are copper, manganese, and magnesium. A commonly used modern equivalent of this alloy type is AA2024, which contains 4.4% copper, 1.5% magnesium, 0.6% manganese and 93.5% aluminium by weight. Typical yield strength is 450 MPa (65 ksi), with variations depending on the composition and temper.[1]
Click to expand...
Click to collapse
Thank you for your post. I learned something new today.
wase4711 said:
dont these aluminum cases affect your phone reception?
the sweet armor looks really nice, but 70 bucks is outrageous
Click to expand...
Click to collapse
Yeah, I've heard that too about reception.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
So, has anyone tried one of these, yet?
I just ordered one, I'll tell you my review after receiving it
alarajh said:
I just ordered one, I'll tell you my review after receiving it
Click to expand...
Click to collapse
From their pics, it seems like there isn't any inner rubber/foam lining. PLease let us know!
any new info here?
rnp614 said:
any new info here?
Click to expand...
Click to collapse
I got Gold Don Star case. I used to have sweet armor case for galaxy s2. When I compare the two the biggest difference is the material.
The sweetarmor is more of metal feel. When it hits something you will definately know it is some kind of thin metal or aluminum. With Don star, it is more of plastic feeling.than metal. it feels durable, and the fit is tight and well, but I hear sqeaking sound when i press right middle body. It is great case overall though. It does not interfere with any reception of gps since the material isn't metal.
Make sure if you have fat finger, you will have hard time reaching for the power or volume button since there is no rubber extension comes with case. I have hard time becuase i have big hand, but i can live with it since the case looks awesome.
Overall good quality but i don't know how long it will last, and the price is bit expensive compared to sweetarmor. I bought it for bumper use only.(i have front screen protector and the battery cover, I will buy another battery cover when it gets too much scratch)
I will try to post a pictures soon.
i bought one off ebay like 3 weeks ago and am still waiting for it.

hardcover book case?

Has anyone seen a case for the note 3 that is like a hardcover book? If anyone has seen the ones made by portenzo and/or dodocase you know what i'm talking about.
codemansGT said:
Has anyone seen a case for the note 3 that is like a hardcover book? If anyone has seen the ones made by portenzo and/or dodocase you know what i'm talking about.
Click to expand...
Click to collapse
Closest thing I've personally seen is on the usbgeek site. I'm new and can't post links but it's called "book case for note 3."
Like this?
These are on eBay for $16.
I have found some make by a Korean company called araree. You can find them at zoarah.com, they have a polycarbonate shell on the inside. I haven't bought one yet because I have the wireless back cover and afraid it won't fit.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
codemansGT said:
I have found some make by a Korean company called araree. You can find them at zoarah.com, they have a polycarbonate shell on the inside. I haven't bought one yet because I have the wireless back cover and afraid it won't fit.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Same. I found some from ARAREE (see the 1st pic)
Then there are a few others from ebay.
2nd pic >> seller: shop-leather
3rd pic (and way hilarious imo) >> seller: casemate_168
I purchased one from amaz0n on Friday. It should be here tomorrow. I will take pics and post them as soon as it comes in. :good:
I am very happy with the quality of this case. The one issue I had with it was that it had no clasp. I do not like the idea of dropping this and having the front flip open and it land screen down. That would kind of defeat the whole purpose of having a case like this. So I modified mine with a leather strap and button clip to close it.
codemansGT said:
Has anyone seen a case for the note 3 that is like a hardcover book? If anyone has seen the ones made by portenzo and/or dodocase you know what i'm talking about.
Click to expand...
Click to collapse
There are 2 types of cases. One is made of hardcover
hardcover case
There other one is made of faux leahter for outer cover and hardcover for interior
leather case
have you try to use spigen's case
I ordered the Design case from the company in China directly, the price is reasonable and they seem to have a reasonable return policy. I'll post pictures/review when I get it.
strider5236 said:
I am very happy with the quality of this case. The one issue I had with it was that it had no clasp. I do not like the idea of dropping this and having the front flip open and it land screen down. That would kind of defeat the whole purpose of having a case like this. So I modified mine with a leather strap and button clip to close it.
View attachment 2596818
View attachment 2596819
View attachment 2596820
View attachment 2596822
Click to expand...
Click to collapse
I was about to buy this case how does the leather feel on it real or fake?
Sent from my SM-N900P using Tapatalk
mainstang said:
I was about to buy this case how does the leather feel on it real or fake?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
It feels like real leather as I believe it is. Granted it is thin as they use hard backing to make up most of the thickness, but it is holding up very well and I am very pleased with the quality. I get compliments on it all the time when I go shopping or to the bank.:good:
strider5236 said:
It feels like real leather as I believe it is. Granted it is thin as they use hard backing to make up most of the thickness, but it is holding up very well and I am very pleased with the quality. I get compliments on it all the time when I go shopping or to the bank.:good:
Click to expand...
Click to collapse
Dang I got the bear motion leather wallet case instead because of not knowing for sure.
Sent from my SM-N900P using Tapatalk
mainstang said:
Dang I got the bear motion leather wallet case instead because of not knowing for sure.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Well that one looks nice to. I think they both use the same leather. At least that is what it looks like. The only reason I did not go with that one is that I wanted four card slots rather then three. I like the clear fourth slot for the ID so I do not have to pull out my DL all the time. But that seems to be the only difference I can tell as far as quality and function. At least yours comes with a clasp so you do not have to modify like I did.
Good looking, impractical, unusable case
sanjsrik said:
I ordered the Design case from the company in China directly, the price is reasonable and they seem to have a reasonable return policy. I'll post pictures/review when I get it.
Click to expand...
Click to collapse
So, got the case today. It's highly impractical for everyday use.
* It has VERY sharp corners so do NOT put it in your pockets.
* If you want to text, the cover part bends behind and is IN the way of your left hand while you text
* The cover doesn't close flush with the device screen when closed and sitting on a desk
* The material, while it seems sturdy, feels REALLY cheap and made out of cardboard. Just feels cheap.
* If you fold the cover back when you place this case on your desk, it sits VERY awkwardly on the desk at a weird angle.
* If you want to take a picture, HOW do you take a picture with the cover closed? The camera is exposed in the back, but how if you open the cover and it hangs down, it is just * impractical to take pictures.
* The inside cover of the case is cardboard. I would NEVER put a card (only room for one) in the slot. I would be VERY afraid of it ripping and the card falling out.
I'm not sure when this is meant to be used? If you hold the device in your hand and you are playing a game or texting, the cover is very bulky that makes it very difficult to use in your hands.
All in all, I wouldn't use this as an every day case. It's a LOT more bulky when opened back on itself for use.
The sharp corners are SCARY in my pocket. I scratched my leg at least 4 times during the course of 3 hours.
The case is now sitting on my desk unused.
Recommendation:
Nice idea. Bad execution. Impractical case.

Categories

Resources