Related
Hmmm, this is a weird one guys.
I can charge my X10 only if it is plugged in to the USB port via the computer. However, when it is plugged directly into the power socket, it does not charge. Now, I've tried two different chargers, and both work when charging another device (my iPod Touch).
I don't understand. The cord can't be broken, since it works when charging from my computer? Yet, the charger (the thing that plugs into the wall) can't be broken either, since another charger didn't work and also both have the ability to charge my iPod.
What's up? :S
Thanks in advance.
NOTE: Even when charging while off works on the computer, just not when it's plugged in (and I am not using a custom kernel either). I doubt the ROM matters (since it still has the above problem while charging when off), but even so, I'm using v061 of Wolfbreak's 6.1.3 ROM.
Bump bump, bump it up!
Do you use the original SE in-wall charger? If not, thats the problem, if yes I recomend to test with a different wall charger (eg. from another device)
May be the cable it faulty? Because the PC charging uses a less amount of Volts (to my knowledge) and the charging while connected to PC is very slow. Did you try with any other Official cable?
It could possibly be your cable as mine broke a few weeks back (Same Problem), I just replaced the cable now its fine
Guys :-/
Went out and bought a new cable, and still not charging from the power Only from the slower laptop USB port :'(
I think it may be the X10 itself..
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Mayazcherquoi said:
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Click to expand...
Click to collapse
Maybe the connector in the phone is broken????
Yep your usb port is broken, mine did exactly the same thing. You will have to send it to fonebiz in rockdale, nsw. I just got my phone back, took 6 weeks to repair!
blade828 said:
Yep your usb port is broken, mine did exactly the same thing. You will have to send it to fonebiz in rockdale, nsw. I just got my phone back, took 6 weeks to repair!
Click to expand...
Click to collapse
Rockdale? 6 weeks?! Not going that far. :-/ I can live with just charging from the PC at the moment.
Thanks though Sad news indeed
Is is still under warranty? It will eventually stop charging from the PC too. I was waiting for parts to arrive so maybe they have them in stock now. That was 6 weeks from melbourne and back.
Going through the same thing in the US. I was told repair would be 5-7 days, but I'm sure I'm looking longer. If it comes back within the time frame they gave me I will be pleasantly surprised. I hope you're still under warranty and do your self the favor and send it in or soon you will have a very expensive paper weight. Good Luck!
I went through the exaxt same thing. It stopped charging from the wall but could only charge from computer but eventually stopped charging altogether.
Did you try taking out the battery and plugging in with the original se microusb cabe to the wall. After 5 min. put the battery in. First time didnt work for me but then i took out the battery again and put it back in immediately and then it turned on.
try getting a usb-to-wall charger, and plugging your computer usb cable into wall.
Sent from my X10 TripNMiUI using XDA Premium App
Out of curiosity, how long before each of your X10's stopped charging altogether? :S
Because, for me, it's been longer than two months and throughout that time I've managed to keep charging it via the computer.
Thanks.
Mayazcherquoi said:
Hmmm, this is a weird one guys.
I can charge my X10 only if it is plugged in to the USB port via the computer. However, when it is plugged directly into the power socket, it does not charge. Now, I've tried two different chargers, and both work when charging another device (my iPod Touch).
I don't understand. The cord can't be broken, since it works when charging from my computer? Yet, the charger (the thing that plugs into the wall) can't be broken either, since another charger didn't work and also both have the ability to charge my iPod.
What's up? :S
Thanks in advance.
NOTE: Even when charging while off works on the computer, just not when it's plugged in (and I am not using a custom kernel either). I doubt the ROM matters (since it still has the above problem while charging when off), but even so, I'm using v061 of Wolfbreak's 6.1.3 ROM.
Click to expand...
Click to collapse
I've 3 usb-to- chargers here:
From a MP20 phone, generic charger that can't charge my phone and also can't charge most of other devices, output power and voltage are low.
From an old Ipaq(not ipad) it does charge my x10 for some reason takes longer than the original, it says on it 1000mA and 5V, I don't remember the real amp and voltage on it.
And the original one, always charge really fast(2 hours for a full 0 to 100% when the phone is ON)
Conclusion, buy and original charger if you not using one, which seems to be the case.
OR, update your baseband if possible, as battery issues are normally related to baseband are normally the cause of this errors.
To make sure you can always try to do a SEUS repair.
Neo said:
May be the cable it faulty? Because the PC charging uses a less amount of Volts (to my knowledge) and the charging while connected to PC is very slow. Did you try with any other Official cable?
Click to expand...
Click to collapse
Sorry to say this, but your are wrong man.
My charger says 5.0V which is exact the same voltage as any USB ports(exception for some internal USB ports used commonly for bluetooth and other low consumption devices that use 3.0 to 3.3V).
The difference is mainly on the amount of power amp it can supply, the original usb cable + wall charger provides 700mA, while in the PC USB 2.0 ports provide 500mA, 1.0 USB provide 100mA and 1.1 I don't remember now, generic usb wall chargers say sometimes they provide 500mA but they mostly provide 30l0mA and sometimes they do not provide on 5.0V they oscillate between 4.6 to 5.2V a good usb port have to provide 4.95V to 5.1V any difference from this may even burn a phone if higher and not charge or reduce a battery life if too lower.
Everytime a battery is not charged up the end of 100% they battery life gets a bit reduce as next time even if you leave it to charge up to 100% it won't really be at 100%, this can only be seen by measuring the battery voltage after the charge, fully charge it must reach up to 4.7V
on the battery or something like this.
Mayazcherquoi said:
Guys :-/
Went out and bought a new cable, and still not charging from the power Only from the slower laptop USB port :'(
I think it may be the X10 itself..
Click to expand...
Click to collapse
If the cable is too thin(like 1.0 usb cables they can't handle 500mA if connected to an already extended usb port it may not get recognized and also not even charge.
Laptops usb ports may not allow 500mA it different for every laptop, some work, some doesn't and others your have to set that on bios.
Mayazcherquoi said:
I am still suffering from this problem And sometimes when it's connected to the PC and displays 'charging', it instead discharges
Click to expand...
Click to collapse
Always when connected to the PC it should say charging, if it did say discharging at some point then there was something wrong.
But charging on the pc is very slow and not good.
denenatse said:
try getting a usb-to-wall charger, and plugging your computer usb cable into wall.
Sent from my X10 TripNMiUI using XDA Premium App
Click to expand...
Click to collapse
Is there any other model of charger than a usb-to-wall? Sorry my lack of knowledge on this, but i never saw a wall direct charger for x10.
Thanks button is appreciated, rsrsrs
here's a weird one..
when using the wall charger that came w/ my phone, instead of charging the battery its actually draining it, the battery icon says its charging/plugged w/ power but after leaving it plugged in eventually it died out, but if i plug it in my pc it charges w/ no problem..
pls help me or enlighten me as to whats happening...
thanks in advance.
Strange. It should be the other way around. USB 2.0 sockets push 500mah which isnt enough to charge the S while the wall chargers provided are 800/850. Perhaps a dud socket? Try another and if not your charger is fúcked.
yeah, i think its my effin charger, i plugged it in a diff outlet still same, i tried using it to charge my iphone its not working as well. thanks for the help.
Scratchling said:
Strange. It should be the other way around. USB 2.0 sockets push 500mah which isnt enough to charge the S while the wall chargers provided are 800/850. Perhaps a dud socket? Try another and if not your charger is fúcked.
Click to expand...
Click to collapse
USB isnt enough to charge the SXS?
Stop spouting rubbish like that.
I charge my SXS with my PC's USB port all the time and it charges just fine.
Seansmit17 said:
USB isnt enough to charge the SXS?
Stop spouting rubbish like that.
I charge my SXS with my PC's USB port all the time and it charges just fine.
Click to expand...
Click to collapse
For me it discharges faster than it charges. It may charge off yours but typically it'll be very slow or not at all. Some ports push more AFAIK, but the standard is 500max.
I also noticed that, if I have WiFi on, the phone actually discharges when connected to the PC (when used anyway).
I don't know how much current is provided though, never measured it.
If charging through USB is fine then it might be that the charger is shorting the battery + and - through some resistance.
Try another charger and see if it helps , and replace the faulty one. You don't want to break your battery.
On my laptop usb port it will charge just fine. Slower than the normal charger but it does work.
On my desktop pc otoh it drains more than it charges. So there probably is a difference in output on the usb ports.
Sent from my HTC Wildfire S A510e using XDA
RiotRick said:
On my laptop usb port it will charge just fine. Slower than the normal charger but it does work.
On my desktop pc otoh it drains more than it charges. So there probably is a difference in output on the usb ports.
Sent from my HTC Wildfire S A510e using XDA
Click to expand...
Click to collapse
If you were using "front ports" these are often underpowered compared to ones mounted on the mobo(back of case, or all laptop ones).
I connect my phone via my front ports and it charged just fine actually...
I am behind the computer quite a bit and my phone keeps its battery and charges when attached, even when I'm installing a bunch of apps (I tend to browse the market via my browser and pick up apps as i go) I still don't discharge...
It could be a voltage issue with your ports, but with my frontal ports I notice no problems...but anyways, this isn't about the ports, this is about the OP's charger.
To me, it seems like your charger is faulty.
Hi,
I wrote about a similar issue I was having with the phone discharging when connected to USB.
http://forum.xda-developers.com/showthread.php?t=1573336
From what I could tell in my tests that I did the issue is when the phone is connected to the PC and THEN the PC goes into Standby mode. Even on a powered USB hub the phone charging mechanism does not reset correctly and continue charging but begins discharging.
I would have loved if someone else could have tried to reproduce what I wrote in that thread but no one responded. For me the only solution is to charge directly with the AC power and not through the USB as my PC goes in and out of standby regularly.
Phone charghed with USB will drain batery faster then phone charged with wall charghed.
It was thread in xperia arc about that, the test bring that conlcution.
So i recomend to charge with wall for better batery efecienty.
Sry for language im little sleepy. :$
Sent from my LT26i using XDA
I have a S2 and recently it started developing a problem where it charges slowly like it's plugged into the USB Port, tho it charges from a wall socket. If I let it charge for a bit like that and I unplug the wall charger from the socket and stick it back in it's all ok and charges normally.
Does this have smth to do with my charger or with my phone???
Recently I changed the rom and kernel so it's nothing related to that. (i'm on stock kernel, rooted now and before i was on what i have in my signature)
Thanks
I'd try using a different adaptor. If you're rooted I'd also recalibrate the battery. If problem persists a new battery may be needed.
Sent from my GT-I9100 using Tapatalk 2
I changed the battery not even a year ago... swtiched to the 2000mah one
I'm thinking a faulty charger that doesn't wanna charge unless he gets a bit heated up, as in a faulty capacitor
Dunno yet... will try the battery recalibrate stuff first
neur0tek said:
I'd try using a different adaptor. If you're rooted I'd also recalibrate the battery. If problem persists a new battery may be needed.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hawkeye1103 said:
... charges slowly like it's plugged into the USB Port ...
Click to expand...
Click to collapse
Go to Settings -> About phone -> Status. The Battery Status will show you how the phone is charging, by USB or AC. If you use the wall charger and the phone says Charging (USB) instead of Charging (AC) then your charger might be faulty.
fxrb said:
Go to Settings -> About phone -> Status. The Battery Status will show you how the phone is charging, by USB or AC. If you use the wall charger and the phone says Charging (USB) instead of Charging (AC) then your charger might be faulty.
Click to expand...
Click to collapse
Thank you, will try that and let you guys know what I find out.
Sent from my GT-I9100 using Tapatalk 2
Didn't try a new charger... tho i have an iphone one i could use with the usb cable... and see how it goes. But it seems the charger is faulty.
The problem is the charger. A wire was loose in the micro usb charger that tells the phone it's charging from the wall socket and not from usb
Sent from my GT-I9100 using Tapatalk 2
Hawkeye1103 said:
I have a S2 and recently it started developing a problem where it charges slowly like it's plugged into the USB Port, tho it charges from a wall socket. If I let it charge for a bit like that and I unplug the wall charger from the socket and stick it back in it's all ok and charges normally.
Does this have smth to do with my charger or with my phone???
Recently I changed the rom and kernel so it's nothing related to that. (i'm on stock kernel, rooted now and before i was on what i have in my signature)
Thanks
Click to expand...
Click to collapse
It's just settling in.
Hello
My prime was charged a few weeks ago, and i haven't used it in a while so it discharged and turned off.. Now when I try to plug It in, it shows that it is charging, but nothing happens..
It charged for 3 hours, and when I unplug it, it can't turn on.
If I leave it plugged in and turn it on, it shows a screen with low battery icon and turns off immediately.
I can charge the keyboard just fine, the charging led on the keyboard turns green after a while.
It's rooted, but stock rom and have never unlocked it, so no customer recovery..
Hope someone can help me out :/
Sent from my GT-N7100 using xda app-developers app
Battery not charging on tablet
Moonbloom said:
Hello
My prime was charged a few weeks ago, and i haven't used it in a while so it discharged and turned off.. Now when I try to plug It in, it shows that it is charging, but nothing happens..
It charged for 3 hours, and when I unplug it, it can't turn on.
If I leave it plugged in and turn it on, it shows a screen with low battery icon and turns off immediately.
I can charge the keyboard just fine, the charging led on the keyboard turns green after a while.
It's rooted, but stock rom and have never unlocked it, so no customer recovery..
Hope someone can help me out :/
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
It sounds like your battery may have died on you.
Are you using the AC charger or the usb charger?
Mine takes a long time on the usb but charges better on ac.
Are you charging them both while docked, if so try undocking and charging them separately.
How old is the battery, Prime now?
The battery is guaranteed for 12 or 24 months also, just check where your serial number is and it will have a 12 or 24 number on the right under your model number.
Also,l check the charging port and make sure no debris or foreign matter has accumulated in it and some of the pins aren't bent.
If none of this works it means you have an internal problem and a different recovery won't help because you still cannot get it charged.
Post back with your results please.
GTIM2L8 said:
It sounds like your battery may have died on you.
Are you using the AC charger or the usb charger?
Mine takes a long time on the usb but charges better on ac.
Are you charging them both while docked, if so try undocking and charging them separately.
How old is the battery, Prime now?
The battery is guaranteed for 12 or 24 months also, just check where your serial number is and it will have a 12 or 24 number on the right under your model number.
Also,l check the charging port and make sure no debris or foreign matter has accumulated in it and some of the pins aren't bent.
If none of this works it means you have an internal problem and a different recovery won't help because you still cannot get it charged.
Post back with your results please.
Click to expand...
Click to collapse
I've tried both charging it through USB from my computer and through the wall charger (original charger and cable).
I've tried charging it both docked and undocked, separate and together.
The Prime is bought about 7 months ago, and i have checked for dust and such in the various parts.
It says "12" below the serial number btw, but i bought it from England (i live in Denmark) though Amazon, so it would be hard for me to return it..
Though there is 1 thing that is bugging me and i'm not sure if it can be the problem.
There is 1 pin that's not aligned with the others on the charger port on the prime itself
Picture to explain: http://i45.tinypic.com/2r4sw7t.jpg
The 2nd pin from the far left is a bit longer inside the device than the others. I've tried to get it out by using a little metal stick (don't know what its called ) but I've been unsuccessful..
The prime obviously gets some sort of connection when i plug it in (though only if i plug it into the wall charger, doesn't happen with USB, which i kinda predicted) and gets enough power to vibrate, then turn on for about 4 seconds to show a big red battery icon (meaning low power) and then turns off..
I've tried to correct the pins on the wall charger so they're more stable and connect better, i've tried putting the wall charger in the freezer for 20min (google'd it as a possible solution, other said it helped them). I currently don't have any other charger or cable that can connect/charge the prime, but i don't think the problem lies with the charger/cable..
I left the dock+prime docked together charging all night and when i woke up, the dock LED was green but it still wasn't able to boot up at all..
Is there anything i can do to reset the Prime? I've tried the little pin hole under the sd card slot, i've tried various combinations of volume up and volume down and power, but i always end up with the screen with the big red battery icon..
Moonbloom said:
I've tried both charging it through USB from my computer and through the wall charger (original charger and cable).
I've tried charging it both docked and undocked, separate and together.
The Prime is bought about 7 months ago, and i have checked for dust and such in the various parts.
It says "12" below the serial number btw, but i bought it from England (i live in Denmark) though Amazon, so it would be hard for me to return it..
Though there is 1 thing that is bugging me and i'm not sure if it can be the problem.
There is 1 pin that's not aligned with the others on the charger port on the prime itself
Picture to explain: http://i45.tinypic.com/2r4sw7t.jpg
The 2nd pin from the far left is a bit longer inside the device than the others. I've tried to get it out by using a little metal stick (don't know what its called ) but I've been unsuccessful..
The prime obviously gets some sort of connection when i plug it in (though only if i plug it into the wall charger, doesn't happen with USB, which i kinda predicted) and gets enough power to vibrate, then turn on for about 4 seconds to show a big red battery icon (meaning low power) and then turns off..
I've tried to correct the pins on the wall charger so they're more stable and connect better, i've tried putting the wall charger in the freezer for 20min (google'd it as a possible solution, other said it helped them). I currently don't have any other charger or cable that can connect/charge the prime, but i don't think the problem lies with the charger/cable..
I left the dock+prime docked together charging all night and when i woke up, the dock LED was green but it still wasn't able to boot up at all..
Is there anything i can do to reset the Prime? I've tried the little pin hole under the sd card slot, i've tried various combinations of volume up and volume down and power, but i always end up with the screen with the big red battery icon..
Click to expand...
Click to collapse
I am 90% sure that 2nd pin from the left is your problem. if you cant find a way to pop it back into place or dont know somebody who can do it for you then you should probably rma.
here is a thread about the pinout. Take a look at the diagram on post 6 http://forum.xda-developers.com/showthread.php?t=1630300&highlight=pinout
Hi there,
My TFP won't charge or be recognized by my iMac. I have changed the battery, no joy; I replaced the charging port; no joy; and got new charger and cable even though all my others charged other devices, .
Any ideas? Much appreciated
acricketer said:
Hi there,
My TFP won't charge or be recognized by my iMac. I have changed the battery, no joy; I replaced the charging port; no joy; and got new charger and cable even though all my others charged other devices, .
Any ideas? Much appreciated
Click to expand...
Click to collapse
This happened to me because the battery connector inside the device was loose, I had to open up the device up and re-connect it. This time, I've placed some tape to try and make it not fall out again. Maybe the battery is faulty?
Hello Fellas.
I have A Really Wierd Problem!
My Galaxy S3, Doesnt Charge On My Car Charger,
Only Showing Indicator But Doesnt Charge,
Ive Checked it with another USB cable on the charger doesnt charge, just indicating charge.
Ive Checked the charger and everything works well.
i even cut the usb cable with connected and its Showing 5V No Problem...
Anyone Got An Idea?
(The Data +- Green/White Has Anything to do with charging?)
I have this same problem, even tried to completely different chargers.
Sent from my SAMSUNG-SGH-I747 using xda premium
kippermois said:
Hello Fellas.
I have A Really Wierd Problem!
My Galaxy S3, Doesnt Charge On My Car Charger,
Only Showing Indicator But Doesnt Charge,
Ive Checked it with another USB cable on the charger doesnt charge, just indicating charge.
Ive Checked the charger and everything works well.
i even cut the usb cable with connected and its Showing 5V No Problem...
Anyone Got An Idea?
(The Data +- Green/White Has Anything to do with charging?)
Click to expand...
Click to collapse
Hi Kippermois,
are you using stock kernel or custom kernel. I also had the same problem 2months ago, just tried another charger and worked, in your case it's different. Else it's hardware based, else something wrong in your kernel.
Maybe also try to wipe battery stats with CWM, i don't know if it will change something.
KR
John
have you tried changing the kernel ?