I have a rooted Galaxy Tab 10.1 wifi GT-P7510 with CWM
I flashed ROM Starburst ROM and the 1.4Ghz Overclocking kernel for Touchwiz UX.
Shortly after this I started have erratic battery behavior. I was not able to resolve this after trying many of the fixes I founds here. I decided to go back to the stock ROM and kernel.
I download hc-3.1_ota-full_sam_tab_10.1.zip and hc-3.1_touchwiz_ux-full_sam_tab_10.1.zip.
I first tried to install hc-3.1_touchwiz_ux-full_sam_tab_10.1.zip.
and received the following error:
ASSERT FAILED
getprop("ro.bootloader")=="P7100BUKB7"||getprop("ro.bootloader")=="P7100BUKC8"
I then tried hc-3.1_ota-full_sam_tab_10.1.zip and received a similar error:
getprop("ro.bootloader")=="P7100BUKB7" E:error in /sdcard/hc-3.1_ota-full_sam_tab_10.1.zip
I did Factory Reset/Wipe, wipe cache and then wipe dalvick cache.
Navigated to install zip from sdcard > choose zip from sdcard
How can I get back to the stock ROM?
Right now I have it working on the starburst ROM without the overclocking kernel. I still have excessive drain ion the battery.
I want to get back to stock in case I have to send this off to samsung for repair.
Thank you for any assistance you can offer.
I have the same error on a Galaxy Tab 10.1 WiFi I just purchased. Is a wipe absolutely needed? The error seems to be with the ZIP file.
im getting that error and another error. i can reflash the overcome rom. but i jst want to get back to stock. i hear re-rooting works. going to try thattonight. if i come across a fixill post.
Have you reverted the kernel ?
If not, I would start there first.
revert the kernel? how do you do that?
I have had the same errors come up. I reflashed clockwork recovery with odin and after that, problems went away. This has only happened to me if i use rom manager to go into recovery, happens a couple of times.
happyhourtx said:
revert the kernel? how do you do that?
Click to expand...
Click to collapse
Personally I haven't messed with flashing kernels. I would recommend that you head back to the thread where you got the kernel from and start from there. I would imagine that there are instructions, or someone could help you.
OK, I reccomend never using ROM manager it's wonky on our tabs, just boot into recovery with the button combo or the power menu if your ROM has it.
The steps you should take to get back to stock.
I you made a nandroid backup of your stock ROM flash that.
Try re-downloading the stock ROM zips (you may have gotten a bad download)
If those fail.
Flash the new version of Clockwork Mod found in this thread: http://forum.xda-developers.com/showthread.php?t=1090289
(sorry the link button was giving me grief.)
It's an ODIN flash should be pretty simple. Then try again to flash the stock .zip
Unfortunately this may not resolve your battery issue. For help with that go here: http://forum.xda-developers.com/showthread.php?t=1215182
Good Luck!
why can't i flash rom's no more.
When i flash a new rom(froyo, toxic) i get :
formating update
formating system
formating data
deleting files
copying files
and then instalation complete en then it reboots and this is whithin a minute. And ofcourse the rom do not work correctly so i have to odin back to stock. I wipe and reset to factory, tryed other roms( zen, biwinning) same thing happens. Olso my nandroid backups will not work, they all hang at bali kernel screen(palmtree). So now i am stuck with stock waiting for a solution. thanks
After you ODIN to JFD... can you explain what steps you are taking?
The more detail, the better.
after i odin back to stock, i root the phone, install rom manager, flash clockworkmod recovery. If i do a nandroid restore i get samsung screen followed by bali screen with a female robot voice saying something about paritioning 2 min and counting then it hangs. I also do a wipe before the restore. If i flash a rom in rom manager or in recovery mode i only get wat i mention above, i do not get a loading bar. Thank you for the reply
Don't restore, your nandroid has voodoo enabled, likely causing issues.
Try this:
Odin to jfd (assuming you have no issues, if you do, try my )
download my option b update.zip (from noob guide) - this allows you to avoid ROM Manager/cwr.
Download a good ROM, I would suggest miui revamped or birgertime's cm7 build (my preference)
Download Bali for cm7/miui
Move all 3 to internal sd
Hold in both volumes + power (can be done with phone on after going to jfd and moving files to phone)
Release at vibrant screen
This is stock 2e recovery, reinstall packages (2x maybe)
Should be in cwr now
Flash ROM
Flash Bali
Reboot phone (don't do anything else)
After it boots, wait 10, reboot
Restore ONLY non-system apps, reboot
Enjoy bad ass phone.
Let me know...
Ok I will try this tomorrow, I will let know, thanks again.
For the roms you mention I do not need bootlaoders right.
Correct. That's about the most dangerous thing you can do also.
I flashed ss-6 miui. So far everything works, calling, sms/mms, even gps and wow this is a really nice rom. I am really happy now, stock is so boring and slow. But leaves me wondering why i could not flash froyo roms. Thanks and greetings from a happy island(aruba) i got a lot of custumizing to do so cheers
Glad you are up and running with my guide. You could repeat those steps with froyo roms, no problem
Sent using the XDA app.
Trying to install clockworkmod but I have 3e recovery. I did it through rom manager which was a nub mistake but I didn't know 3e was going to troll me. So it says:
e:failed to verify whole file signature
e:signature verification failed samsung "3e"
I then followed this thread: http://forum.xda-developers.com/showpost.php?p=16909269&postcount=12
and tried the Speedmod kernel to get rid of 3e like the person said but that rom is for the international version and now I can't connect to verizon.
So at the point I am thinking using Odin is my only option but all roms are .zip and not .tar. I am clueless as what I can do. Please help me.
So I tried the Odin method in this thread http://forum.xda-developers.com/showthread.php?t=1026746 and flashed the pit and stock 2.1 files. It passed with green in odin but when I put the battery back in it boots into 2e but says # Manual Mode # at the bottom. I am not sure if that means the flash didn't actually work or what. I am lost now.
Thought I'd update this thread since I finally fixed the problem and sucessfully put Cyanogenmod7 without using the stupid Rom Manager after about 8 hours of work. So just in case someone wants to know what I did. For some reason Odin was not working so I used Heimdall v1.83 and the EB01 Heimdall package and sucessfully flashed to froyo 2.2. I mounted the sdcard and put Cyanogenmod7 and gapps on it.
Now I used Odin to flash the CM7 capable CWM (I think its version 4). Booted the phone into download mode and then used jt1134's ClockworkMod Recovery found in the CM7 fascinate wiki. The wiki says use Heimdall but I used Odin and it worked. The CWM is now blue instead of Red. Next I did a wipe data/factory reset along with wipe cache partition. I selected install zip from scard and choose the CM 7.1 package. Everything went well and it boots into CM7. NOW TO INSTALL THE GAPPS. I thought I just boot into CMW using the volume buttons and power button BUT NO that is NOT correct. In CM7 you have to hold the power button and press reboot and then select recovery AND THEN IN THAT CWM select install zip from sdcard (choose gapps). THIS IS IMPORTANT OR ELSE GAPPS WONT INSTALL. I was bummed for like another hour.
So there it is how to install CM7 just when you think you have been to hell and back with the fascinate. Never again am I volunteering myself to help root and install CM7 on a friend's fascinate. The droid incredible was soo easy!
Ok I am working on a vibrant and the phone storage was formatted from stock there is cm7 and cwm on the SD card but when I try to flash the CM7 it boot loops at the start screen with cyanogenmod. I looked and it looks like some root files are missing from the internal sd card. the phone works on stock eclair but i cannot get internet. I can still get into CWM and I have tried did a full wipe as I said and tried to install cm7 but still the same thing. API message comes up when trying to access the internet.
Any ideas on how to wipe everything to stock root files and reflash everything all over again, what am I missing?
You need to flash CM7 twice. After the first flash if it bootloops, pull the battery, reinsert it, boot into recovery, flash CM7 again.
Check out the Noob Guide for instructions on how to Odin back to stock.
I did Odin both times anyone else?
Sent from my SPH-D710 using XDA App
I shall try to explain the situation best I can.
A long time back, I rooted my S2, then I thought I would sell it, so I wanted to put it back to stock and unroot, which I did.
Now months later, I decided to root the phone once again and put another rom on.
To cut a long story short, currently my phone wont accept any roms of any kind.
If I install CM7, MIUI, Sensation Rom, all of them seem to install a kernel as well, which causes the phone to panic upon boot. Which puzzles me, because if they are made for the S2, then why are they causing problems with my phone?
The only kernel that works for me so far is CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4. This allows me to access the internal SD via usb and put on roms. But I can't install them. As every time I do, I just either get a kernel panic or a black screen. I even used this guide, which should be foolproof and all I get is a black screen.
My phone has been in this useless state for 24 hours now and I've googled until I feel asleep at the keyboard.
Im hoping someone can seriously help me with this, as I don't pretend to know what I'm doing.
I was on ICS before this happened.
If you want your phone back then use the method in cnet to get it working again
and about the roms issue, did you factory reset and full wipe your phone before installing a rom?
I reset and wiped everytime. If I follow the cnet instructions to the letter, it just hangs on the Galaxy S2 logo when you turn on the phone and doesn't go any further. The only solution is to put on the kernel I mentioned above to get access to the SD card on my pc.
I now have managed to get CM7 RC working, but that's not the one I wanted. I wanted to use the Sensation rom, but that installs its own kernel which my phone, for some odd reason, doesn't like.
My phone details now are:
CM Mod 7.2 RC1
Kernel 2.6.35.14-g68ea119
[email protected] #1
1.Boot into recovery
2.Full wipe
3.Wipe cache
4.Advanced->Wipe dalvik cache
5.Install sensation rom zip only
6.Reboot
7.Wait for 5 mins
I followed your instructions precisely. I then installed SensatioN_ROM_3.0_ICS_i9100.zip from this thread
It installed, installed a kernel, flashed modem and said done. I then rebooted and waited.
It comes up with the S2 logo with the triangle, fine but now It just shows a battery symbol with a circle in the middle. After a while it goes to black and then comes back. Like its rebooting over and over.
I unplugged the usb cable and instead of the batter I just get the logo with the triangle. That stays there for a while, goes to black and comes back. Over and over.
I can't even get to recovery. Only thing I can do now is go into download mode and start over, put on the kernel I know that works, install CM7 RC1 and then at least I have a phone. But why sensation rom doesn't work is a mystery to me.
X82X said:
I followed your instructions precisely. I then installed SensatioN_ROM_3.0_ICS_i9100.zip from this thread
It installed, installed a kernel, flashed modem and said done. I then rebooted and waited.
It comes up with the S2 logo with the triangle, fine but now It just shows a battery symbol with a circle in the middle. After a while it goes to black and then comes back. Like its rebooting over and over.
I unplugged the usb cable and instead of the batter I just get the logo with the triangle. That stays there for a while, goes to black and comes back. Over and over.
I can't even get to recovery. Only thing I can do now is go into download mode and start over, put on the kernel I know that works, install CM7 RC1 and then at least I have a phone. But why sensation rom doesn't work is a mystery to me.
Click to expand...
Click to collapse
Don't install anything else
Repeat the steps without any modem or anything
Any try to redownload the zip
How do I stop the install of the modem? The thread only shows one zip file and if I install that in recovery, it installs everything. I can't chose what parts to install. Do I have the wrong zip?
X82X said:
How do I stop the install of the modem? The thread only shows one zip file and if I install that in recovery, it installs everything. I can't chose what parts to install. Do I have the wrong zip?
Click to expand...
Click to collapse
Just install this zip by the method above
https://docs.google.com/open?id=0Bzv8B0L32Z8lZ2hSanUtVHpSb0tFUlhkRVQ1RFhEUQ
Nothing else
While it downloads from google, I just want to clarify.
Wipe data, wipe cache, wipe dalvik. Then I go to install zip from sd. Find SensatioN_ROM_3.0_ICS_i9100.zip, then it installs. But the last time I did this, it scrolls up saying it was installing file system, then flashing kernel, then flashing modem.
Am I doing something wrong here?
And that google link is slow as hell, quoting me 7 hours to download it. Got it from hotfile instead, going to try that one.
X82X said:
While it downloads from google, I just want to clarify.
Wipe data, wipe cache, wipe dalvik. Then I go to install zip from sd. Find SensatioN_ROM_3.0_ICS_i9100.zip, then it installs. But the last time I did this, it scrolls up saying it was installing file system, then flashing kernel, then flashing modem.
Am I doing something wrong here?
And that google link is slow as hell, quoting me 7 hours to download it. Got it from hotfile instead, going to try that one.
Click to expand...
Click to collapse
Yes it should work like that if you have a i9100
Done exactly as you said. I downloaded it from the hotfile link instead and installed it.
Came up with the same thing.
Cleaning Old System files
Installing System
Data Files
Symlinks
Flashing Kernel
Flashing Modem
Ready
Then I reboot and the same looping over and over. Can't access recovery. Only solution is using odin to flash the kernel I used before and be forces to use CM7 since nothing else works.
It's so confusing as Im using the same hardware as everyone else on the sensation rom thread, but it wont work for me. at all.
you sure you have i9100?
GT-I9100
I'm totally puzzled. MIUI doesnt work, Sensation doesnt work and stops me from using recovery. The only thing that works is kernel CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.tar then install CM7 RC1 which upgrades the recovery to version 5 and the phone works. But only on CM7. If I try to install any other rom, it dies a death.
X82X said:
GT-I9100
I'm totally puzzled. MIUI doesnt work, Sensation doesnt work and stops me from using recovery. The only thing that works is kernel CF-Root-SGS2_XW_XEU_KE2-v4.0-CWM4.tar then install CM7 RC1 which upgrades the recovery to version 5 and the phone works. But only on CM7. If I try to install any other rom, it dies a death.
Click to expand...
Click to collapse
And don't tell me that you flash cf-root after flashing every rom from recovery
No, I only flash that when the rom seems to corrupt it. Like when installing sensation. The only way I can access the SD card to put on another rom is to install that kernel.
X82X said:
No, I only flash that when the rom seems to corrupt it. Like when installing sensation. The only way I can access the SD card to put on another rom is to install that kernel.
Click to expand...
Click to collapse
This is really weird
Maybe someone else can help you
Sent from my x10i using Tapatalk
ok lets try again........
1: forget everything [ideas you have.]
2: go into clockwork recovery
3: format every partition including system / boot [remove your sdcard before starting]
4: use odin and flash stock 2.3.6 LA2 [u can flash whatever you like] and let it boot.
5: now use cf-root and root your device [http://forum.xda-developers.com/showthread.php?t=1103399 ]
6: i assume you know your way from here.
note: its very important to format system / boot partions
if yo dont have cwm or you want to try from scratch heres the latest cwm
http://www.mediafire.com/?wkki6xahfhb3bim
Thanks for info. Just to clarify, the cf-root link contains loads of different ones. How do I properly know which one to use or doesn't it matter? And as for the stock 2.3.6 LA2, again, where do I find that? Reason I ask dumb questions is I don't want to assume and try the wrong one and come back here and complain when it was my fault, I just want to be 100% sure, so again sorry for the obvious questions.
I flashed I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME then CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.
It seems to be working fine now with the default rom. However, when I go into recovery to say perform a backup or mount the sd card, It won't have any of it.
When I try to mount the sd card it just says "error mounting sd card" and when I mount usb storage it says "unable to open lunfile (no such file or directory)". So I don't want to try another rom yet.
X82X said:
I flashed I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME then CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.
It seems to be working fine now with the default rom. However, when I go into recovery to say perform a backup or mount the sd card, It won't have any of it.
When I try to mount the sd card it just says "error mounting sd card" and when I mount usb storage it says "unable to open lunfile (no such file or directory)". So I don't want to try another rom yet.
Click to expand...
Click to collapse
lol when i said or what you want i meant from GB you flashed a ICS ROM. well do this and this time just do what i say......
use odin again and flash XILA2 . after boot dial *2767*3855# [a must]
after reboot you should be running a problem free ROM.
now from CF-root find LA2 and flash that now play with it a while and than you do whatever as now you know where and how to get back to working ROM.
plus after LA2 you will find everything on your phone works so any problem you get on other roms is not hardware
recovery issues should be fixed now. otherwise use odin and again flash that cwm file i posted earlier. you wont loose root
Download ROM from Here